Acer V5 converter cable

Similar Questions

• With LabVIEW how to control an instrument with a RS232 output, using a USB RS232 converter cable.

  With LabVIEW how to control an instrument with a RS232 output, using a USB RS232 converter cable, since I do not have rs232 ports. I have two instruments I want for the control in this way. One is a guarantee of strength Imada SPAS with RS232 output. The other is a micrometer Panasonic HL-G103-S-J laser sensor which is RS422. I have done significant programming LabVIEW using GPIB, but I have no experience with devices such as these. No matter what tutorial or examples would be greatly appreciated.

  Thank you.

  When you plug the USB-RS-232 converter, it installs a driver under Windows which makes it look like any other RS-232 port.  You may need to install the driver of everything that came on the CD with the converter.  It will get a Com as Com5 port number according to what is the next available number.

• Acer Ferrari 4000 cable

  I need a 8 (multi color) wire for the Acer Ferrari 4000 connector. It is about 4 "long and connects the motherboard to the top cover. One end (connection Mo) can be seen with the keyboard removed just above the touchpad and keyboard connect and a little to the right. No part number and I have searched the web without success. Just guessing, but it could be called the MDC cable? Help

  Thanks for the photos. This cable part number is:

• I bought a converter cable for my drive hard ide but can't see are getting access to them

  I bought a drive hard ide to usb cable but cant fing or get promition view them on my drive hard ide of my old computer I right click and tried to change the owner of this which has woeked but still cant view or im port photos and other music

  Hello

  I suggest to check if the drive is detected in disk management and if the drive is detected in disk management, then try changing the drive letter and check if it helps.

  Step 1:

  Check if the drive is detected in disk management.

  Follow these steps to check in disk management:

  a. click on the star.

  b. right click on computer, then click on manage.

  c. click on disk management.

  d now check if the drive is detected, if the drive is detected, then try step 2. If not found then the converter may be faulty.

  Step 2:

  Change, add, or remove a drive letter:

  http://Windows.Microsoft.com/en-us/Windows7/change-add-or-remove-a-drive-letter

  Hope the information is useful.

• try to use the old printer using usb/parallel converter cable

  trying to connect printer to computer hp 940c hp laptop pavilion via a USB cable conversion... windows vista

  Hi Doug,

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I appreciate if you could help me with more information.

  1. What is the exact problem you are facing the computer?

  2 do you have problems with the use of 940c on the Windows Vista computer HP printers?

  3. do you get an error message/code?

  For your reference:

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Response with more information to help you.

• PS3 connected to Windows 7 on laptop with usb ethernet and converter cable. Technician COMPUTER put in place, but the second time I used it it gave me the DNS 80710102 error

  I don't know that it's a quick fix that I'm used to the Macs. Someone please advise

  Hello

  Did recent changes to the computer?

  Follow these steps.

  1 - Open a browser and enter the router's IP address in the navigation bar. For most routers, the default IP address is (192.168.1.1).

  2 - Enter the user name and password to access the router. Press 'OK' and the console application will be displayed in the browser window.

  Tab 3 - Click the "Password". The UPnP settings are located in the same window as the password of the router settings.

  4. Select 'Disable' titled "UPnP" area and click on the Save"" button. Close the console of the router. Start the Playstation machine and connect to the Internet.

  For more information.

  http://community.EU.PlayStation.com/T5/PlayStation-Network-General/unofficial-DNS-error-fix-80710102/TD-p/7903885

  I hope this helps.

• Cable specifications Acer (CP Mini VGA/LAN/USB) converter

  Does anyone know the specification of the converter cable for Acer (CP Mini VGA/LAN/USB) NP. OTH11.00C? (The less physical, such as weight and length Specificaiton)

  It is heavier than the Acer CP Mini VGA Converter NP. OTH11.00B?

  Ok. Amazon says:

  Model number of point NP. OTH11.00C (Mini PC in VGA/LAN/USB)
  Article 41 g weight
  Dimensions of the product 27.7 x 18.1 x 2.4 cm

  Model number of point NP. OTH11.00B (Mini PC/VGA)
  Article 36 g weight
  Dimensions of the product 14.9 x 12 x 2,2 cm

• What converter to usb 2.0 cable connects to a sidewinder 3D pro joystick 15-pin gameport in addition?

  I want to connect the controller on a PC with no game port, only USB under Windows 7 Home Premium.  I need to find an appropriate converter cable, so I can check if the gamepad will work.

  Sorry to resurrect this thread but I have done some research on this recently and cam on this.

  The answer to that is a bit complicated.

  MS produced a joystick (followed by "3D Pro") which has been converted (boxed) as "precision Pro" However if you looked under the name embossed control lever was "3D Pro Plus.  This joystick is not easily compatible USB.  The follow-up of the joystick, which looked identical, was marked below as 'Precision Pro' and it came with a simple USB adapter (as simple as just a series of wires that connect the game Joystick Port and a USB key).

  Obviously care must be taken when buying or the other of these second hand as most sellers describe the item based on the name used in the box that has been 'Precision Pro'.  But I think that this last unit compatible USB had written on the box.

  Individual units can be identified by the name embossed on the underside of the unit and the first 5 letters of the product (also below) Id:

  Product ID: 97482-xxx is a "3D Pro Plus" - NOT USB compatible.

  Product ID: 85791-xxx is a 'Precision Pro' - compatible with a simple adapter USB.

  The follow-up of the 'precision Pro' was the ' precision 2 "was only USB but this was a new physical unit and would suffer the more static accumulation of problems as its predecessor and had removed the shift.»

  All of these units were reportedly USB 1.x, which should be usable on a USB 2.0 connector.

• specification of the Mac mini hdmi cable

  I want to connect mini mac to a projector via a HDMI cable. Is there any specification that I should look for when buying the HDMI cable? I'll buy a third party such as sony or belkin or a similar brand one.

  I have 2 screens hung on my Mini in 2014. Whether through HDMI. A straight line on the available on the Mini HDMI port. The other HDMI cable is connected to a bolt of lightning 2 port via a HDMI-> Mini Display port converter cable.

  The two cables supplied with my computer screen HDMI. But they seem to be general brand stuff. But both work perfectly.

  I have no experience with projectors, but I don't think that general brand cables should be a problem.

• The scanner on my Epson SX525WD does not work on my new Acer's Aspire5742

  The scanner on my Epson SX525WD won't work on my new Acer's Aspire5742.I print of the Acer using the cable network and printer. I know that the scanner is good because I can scan of my 'old' Dell laptop using the printer cable. When I try to open Epson Scan on the Acer, it tells me that the scanner has stopped working. I uninstalled and reinstalled, tried different USB ports, running in XP mode (my Acer is Windows 7), but it does not scan. Can you help me?

  You have installed the drivers scanner? The Epson SX525WD printer has separate drivers for the scanner, you can download them here and then install them:
  http://www.Epson.co.UK/store/printers-and-all-in-ones/Epson-Stylus-SX525WD/drivers-support

  To see if you have Windows 7 32-bit or 64-bit:

  1. Open system by clicking the Start button, right-click computer, and then clicking Properties.
  2. Under system, you can view the type of system, it will say 32 or 64 bits.

  How to install a Scanner:
  http://Windows.Microsoft.com/en-us/Windows7/install-a-scanner

  Working with the scanner and Camera Installation Wizard:
  http://Windows.Microsoft.com/en-us/Windows7/working-with-the-scanner-and-Camera-Installation-Wizard

  Setting up a printer:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Try the printer Troubleshooter

  1. open the printer Troubleshooter by clicking the Start button

  2. then click on Control Panel

  3. in the find what box, type troubleshooting

  4. then click on troubleshooting

  5. under hardware and sound, click "use a printer.

• Used to synchronize Firefox.

  Hello. I just bought a new computer and use the latest version of Firefox. I logged in sync to transfer all my favorites and passwords, but so far nothing has transferred and it has been two days. I opened a session out and back in sync and nothing has changed. I get a confirmation e-mail saying that sync transfers momentarily, but then nothing happens beyond that.

  Is that what I'm doing wrong? Thanks in advance for your suggestions.

  light_cmdr said

  I FORGOT my password for synchronization because it was a moment that I had to use it. Beyond that, he has no problem after that I managed to open a session.

  Sorry, but as a security measure, your synchronization data are deleted from the server when a new password is required. -Yes - your data is lost of Sync.

  When it comes to the old PC, the old hard drive can still work if you plug it as an external drive using an inexpensive (~ $25) IDE to USB converter cable / power supply.
  Just set the folder options Show hidden files and folders in the Control Panel (or whatever this is called to Win 8) and are looking for your old Firefox profile folder.

  Who is in this way, is not an exact "path - to":
  C:\Users\ < Windows > \AppData\Roaming\Mozilla\Firefox\Profiles\< Nom_de_profil >.
  https://support.Mozilla.org/en-us/KB/recovering-important-data-from-an-old-profile

• HP Elite 7300: imminent hard drive failure

  Hello

  I have a desktop hp elite 7300 with windows 7

  I get the rather alarming message that my hard drive is about to fail.

  So I bought a new SSD.

  How can I move windows 7 to the new drive?

  Kind regards

  Scarab

  To have a upgrade kit, it is exactly what you need to buy. The second SSD purchase I made for one of my own systems was a upgrade kit in the future in mind. Once you have the kit that comes with the cable and the software, you are ready for the future updates for SSDS on other systems. Usually a major supplier of SSD has free cloning software available for download. It's just being customer friendly. Samsung and Corsair are like that.

  Paragon software and others sell SSDS cloning of the software applications that will do exactly what you need.  There are free applications that clones since the current for the SSD hard drive.

  You can pick up the usb converter cable to SATA to an online retailer or a local store for a price relatively low.

• TV Toshiba 40L3433DG - not coaxial audio work?

  Hello!
  I'm sorry for my sentence, but English is not my natural language

  I have a problem with a coaxial audio output in TV Toshiba 40L3433DG, which is connected to the home theater LG BH6530T via coaxial converter in French - output optical. Home Theater is not playing the sound of the television but detect a TV - input optical signal is active in home theater settings, after that disconnect the cable TV coaxial, optical entry into a home cinema is inactive. I tried to play sound from TV programs (DVB - C), video from a USB key connected to the TV and YouTube.

  I first thought that the problem is in the coax - optical converter, but I borrowed from my DVD player old parents with coaxial output, I connected the coaxial cable from TV to DVD and home theater has started playing the sound sent from the old DVD drive. In this way, I have eliminated the potential problems with the coaxial cable, converter cable to fiber optics and optical of entry into home theater.

  There's the television... Now my question - does this kind of TV has a special option to activate the digital audio output? In the sound settings, I can choose digital output PCM or compressed. If the TV does not have a special option to activate the output, is the possibility to use a test mode to check the coaxial?

  Posted by bambaja
  

  Hello!
  I'm sorry for my sentence, but English is not my natural language

  I have a problem with a coaxial audio output in TV Toshiba 40L3433DG, which is connected to the home theater LG BH6530T via coaxial converter in French - output optical. Home Theater is not playing the sound of the television but detect a TV - input optical signal is active in home theater settings, after that disconnect the cable TV coaxial, optical entry into a home cinema is inactive. I tried to play sound from TV programs (DVB - C), video from a USB key connected to the TV and YouTube.

  I first thought that the problem is in the coax - optical converter, but I borrowed from my DVD player old parents with coaxial output, I connected the coaxial cable from TV to DVD and home theater has started playing the sound sent from the old DVD drive. In this way, I have eliminated the potential problems with the coaxial cable, converter cable to fiber optics and optical of entry into home theater.

  There's the television... Now my question - does this kind of TV has a special option to activate the digital audio output? In the sound settings, I can choose digital output PCM or compressed. If the TV does not have a special option to activate the output, is the possibility to use a test mode to check the coaxial?

  Hello I have the same problem.
  My tv is 48l5435dg. I tried my Soundbar with a cheaper TV and works very well (so no problems cable or converter).
  I restarted my toshiba repeatedly and sometimes he started working, but just 2 seconds (it loses the signal)
  I don't understand what I have to do!
  All solutions?
  Thank you

• Can I start a PowerMac G4 733 Mhz 'QuickSilver' 2001 of a 128 GB SSD connented to use a PCI SATA card?

  HELLO, my name is Francesco and I have a PowerMac G4 733 Mhz "QuickSilver" since 2001. Inside of it, I have two IDE hard disks and I want to upgrade to a 128 GB SSD. The problem is that: the G4 only has not connectors SATA, so if I install a PCI SATA can I boot OS X 10.4.11 her? Can someone suggest me a specific type of PCI SATA card to use?

  Thank you very much

  Fancesco

  Hi Francois,.

  Some PCI SATA cards are not bootable, you have a link to the one you had or have decided to do?

  While not as fast as a SATA card, a szimple adapter can be an option...

  http://www.eBay.com/ITM/2-in-1-SATA-to-IDE-HDD-IDE-to-SATA-serial-ATA-100-133-ad apter-converter-cable-/ 381394886475

• Direct print from laptop computer connection

  I have a laptop HP with windows 7 32 bit and the designjet 650 c B model with an installed direct jet card, so I a usb converter cable network I want to print from a usb port or from the port of network cable. I just want to know what is called the port that I use? Help, please!

  You have a wireless router?  I have a Designjet 650 c connected to my router with a LAN cable, can I access the 650 c of my HP laptop wireless via the router.

  If you follow this path, you will get an IP address for the Designjet 650 c by selecting Prev in the menu until you get to the entrance, the top menu can go down three times for installing I/O, entry, entry (modular), entrance (network Cfg = >), down Yes, Prev, Prev, Prev, entrance, entry, down arrow twice for utilities Entry, arrow down twice for Config plot, Enter.

  That you select the jetdirect card like I/O device, get an IP address from the router and then print a configuration page that displays the IP address to halfway to the bottom of the page.

  On laptop computer click Start, devices and printers, do a right-click on the Designjet 650 c, printer, port properties, add a Port, Port TCP/IP Standard, new Port, following, then enter the IP config page printed.  For me, it comes to 192.168.1.13.  Enter the appropriate value, Next, Finish.

  If you do not have a router then consider making an inexpensive wireless router that could be wired to the Designjet and wireless for the laptop.  It would probably be a much better solution than to try to make a converter USB - lan.