Acer Veriton M275 of does not start after the opening and closing of the case.

I was about to update with an SSD HD, so I opened the folder and discovered there is no extension SATA ports. Private affair and now system put, CPU fan runs but no display or power USB for keyboard and mouse. Have you tried bypassing the switch of intrusion with a rider-no difference. Tried to remove the battery to reset the CMOS-no effect. Have reinstalled the case and tried without effect. Help

Turned out to be bad RAM stick. Thank you.

Tags: Acer Desktops

Similar Questions

  • Acer Aspire S7 392 does not start after the new Antivirus installation

    Hello

    I bought the Acer Aspire S7 392 in October this year of digitec.ch AG here in Switzerland. Everything worked well until December 19 when my Antivirus McAfee has expired and I decided to change my Comodo Internet Security antivirus. A month back, I had installed Windows 8.1 as well and things were smooth until last night. Last night, when I installed Comodo Internet Security, the computer requires a restart, I did, and then my computer erased. I could not even reached the Acer logo at startup.

    As I tried to check the observation of details of covers them this white screen problem, Irealized that many people suffer from a similar problem. It seems that Windows 8.1 and an installation of a new antivirus may have led to this white screen problem. In addition, it seems to be a bios problem that the computer would not start and I hope that someone could help me with this problem.

    Thank you very much Acer-Tommy. I had to take it to the Acer Support in Switzerland. He partially solved the problem. My S7-392 has a built-in battery that I had to reset which allowed the laptop to reboot normally. As in, I was able to boot up to Windows 8.1. However, as soon as I logged into Windows, it hooked up soon. Do the restart 3 times triggered the automatic repair/update option. That I took and returned to Windows 8. I had a Bios 2.05 2.03 intead and I had to install 2.05 before making updates. I recommend you seriously all the people who use the S7-392 to strictly follow the installation procedure for Windows 8.1 mentioned on the Acer site.

    Please update your Bios to 2.05 before installing something new, especially a new anti-virus.

  • Two iMacs does not start after the 10.11.4 update.

    Two iMacs does not start after the 10.11.4 update.  Progress bar starts moving and then text appears on the black screen saying unexpected sigkill to launchd.  He then gets stuck in a loop trying to start.  Tried to reset the SMC and LANDAU.  Without success.  Started in recovery mode and ran disk utility.  Discs said OK.  Chose to reinstall OS X from the list of options in the recovery mode (assuming it would be 10.11.4).)  Installation is finished but still once does not start.  Reinstalled on 10.11.0 successfully from a USB key and downloaded the 10.11.4 combo updater.  Installation seems to work, but once again, the macs will not start.  Same 'unexpected launchd sigkill' error.  A mac is now back working properly with 10.11.3 the other will be shortly.  Is there a problem with the accession?  Our COMPUTER support use Munki to get updates from one day to the next.  Fortunately, we were able to stop it before the other 20 or if Mac had the same problem.

    More information: two bricks iMacs were late 2013 models.  A 21 "and a 27.  We have just updated a test iMac which was a late model 2012 using the 10.11.4 combo updater.

  • ITunes does not start after the installation of Windows 10

    ITunes does not start after the installation of Windows 10, 1511 version (OS Build 10586.164). ITunes version 12.3.2.35, 6 GB RAM, Intel i3 @3.3 GHz. Itunes and Ipodserver module will run by Manager jobs, but Itunes does not open. iTunes starts in SafeMode as explained in the link below (hold SHIFT and control on your keyboard while you open iTunes).

    Fix unexpectedly closes or problems of launch in iTunes for Windows - Apple Support

    Solution, according to this link, is:

    If the problem does not occur in Mode safe, remove any third party plug-ins iTunes: solving problems with third party plug-ins - Support Apple iTunes but the link has been archived, and I can't find any plug-ins installed iTunes. Any other ideas?

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

    Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

    More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

    Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

    TT2

  • Computer does not start after the screen of the bios, Compaq Presario SR1023WM

    Ok. Trying to fix a friend's computer and seem to have met a strange barrier.

    Problem: The computer does not start after the bios screen.

    Details: When you turn on the computer, the compaq logo with intel inside is and has the < F1 Setup > and < F10 System Recovery > options listed as well.  And that's it as far as the computer becomes.  After that the computer just locked up, no work of buttons on the keyboard lights keyboard ect ect.  I tried the puree on the F1 key, as soon as I turn on the computer and I can handle so he can say * entering setup * but it freezes again after this point.  I already tried to eliminate the possible sources of the problem, removed all expansion cards, HDD and Dvd Rom module only disconnected, only memory (256 MB ddr 2700), power, vga and keyboard connected.  Ive also used the jumper on the motherboard to clear the cmos, hoping that would solve the problem without success.  I tried using a different memory stick and different memory as well...  Tried to use both a ps2 and a usb keyboard... Ive even tried pulling the rider for the protection of the bios password (even if she did not have a password on it, just try everything I can think of).

    The installed bios version is 3.1, and that's all that I know on the computer at this point, except that the website tells me to him.

    http://h10025.www1.HP.com/ewfrf/wc/product?product=411354 & LC = on & CC = US & DLC = in & Submit.y = 5 & Submit.x = 3 & lang = to & CC = US <-link to the Web page for the model #.

    I'm basically at a loss on this one, so if someone feels scroll line-by-line of their brains on this one, I'd be very happy.

    I have a pretty strong understanding of computer repair, so feel free to give me something to try.

    If you need more information out of me, let me know as well.

    Try to clear the CMOS again but this time remove CMOS battery and hold the power button on a few seconds. Replace the battery, then try to start back to the top.

    At the back of the pc is the condition of the PSU led green or flashing?

  • Z600: computer does not start after the installation of the 5 TB SATA drive

    My z600 refurbished does not start after the installation of a SATA of Toshiba 5 to disk.  After removing the drive, the computer starts.  I have my computer too old to handle a 5 TB drive, I something wrong or is the DOA drive?

    Thanks for the info.  I added the GPT to my search and discovered what had to be done in disk management.  Here is a page with step by step instructions and photos.  http://www.howtogeek.com/193669/whats-the-difference-between-GPT-and-MBR-when-partitioning-a-drive/

  • computer does not start after the Windows XP logo window

    Windows xp home edition
    service pack 2
    Dell inspiron 1501

    1. computer does not start after the Windows XP logo window
    2 works well in safe mode, even connect to the external monitor
    3. I reinstalled xp many times, problem stil exist.

    All the answers?

    Hi dhanushm,

    1. What happens after the Windows logo screen?
    2. You receive an error message?
    3. You have security software installed on the computer?
    4. Have you performed an installation clean Windows XP and even after that this problem exists?

    Method 1

    As the computer starts up fine in safe mode there is a possibility that some third-party programs installed on the computer is the origin of the problem.

    I suggest that you configure the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See section to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    1. Click Start , and then click run.
    2. Type msconfig , and then click OK.
      The System Configuration utility dialog box appears.
    3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.
    4. When you are prompted, click restart to restart the computer.

    Method 2

    If fails it above step can refer to the article below and try the steps mentioned, check if it helps.

    After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

    http://support.Microsoft.com/kb/318027

  • XP does not start after the installation of avira. Blue screen: STOP: 0 x 00000024 (0 x 00190203, 0 x 87174270, 0xc0000102, 0x00000000)

    Original title: xp does not start after the installation of avira

    I have a HP Slimline s7410
    XP Home Edition SP3
    I had Norton free with Comcast, but since I have no more Comcast became Norton expired. So I uninstalled Norton and installed the free version of Avira, he scanned the computer and it was clean. I went to reboot and now it does not start.
    I have a cd/dvd drive of work.
    I don't have an XP bootable installation CD

    My system worked well until: I installed the free version of Avira

    Whenever I select one on the XP advanced options options menu start, it goes into a boot loop.
    I turn off the auto reboot system failure although it seems only work once, as the next time he's trying to start up it goes into the boot loop.

    Here's what my BSOD looks like:

    Disable or uninstall any anti-virus, disk defragmentation or backup utilities. Check the configuration of your hard drive and check the updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

    Technical information:
    STOP: 0 X 00000024 (0 X 00190203, 0 X 87174270, 0XC0000102, 0X00000000)

    Any help is greatly appreciated! :)

    My first suggestion is to do a system restore at this time point.

    second suggestion is to keep your external drive connected to the pc at all times.  only detach when necessary.   of course, it would be better to install a second hard drive in the computer instead.   in any case, keep your personal files out of the system disk is a wise thing to do.   You can also download and store files for free on the Microsoft Skydrive site.

    third suggestion is to keep your system set upward through executing a check disk and Defrag at least once a month.   Basically, you can open the Explorer and right-click on the drive letter.  then select Properties, and on the Tools tab, you will have the opportunity to run the disk check.  then reboot and do a Defrag.   where this disk check fails, then you will need to run it to the drive via a bootable cd prompt.

    Interestingly, I don't know if the bootable cd that you made you allows to run the disk check.

    so my suggestion is to do a series of tests using your cd bootable your computer works.  see if you can actually run a chkdsk/r at the moment with them.    If Yes, then if your constant worries are having bad sectors on the hard disk, chkdsk/r will identify and mark so windows will jump on them.    in any case, see if your boot at the moment media can run a check disk at all, and let me know.

    fifth proposal is to install "microsoft security essentials" like your anti virus program.  even if you have run ubantu, it is not likely to have been an infected copy.   anti - are most critical virus for windows and not not so much for ubantu or linux is because windows is a system of world class operations.    the people who make the virus deliberately their engineer for the windows operating system.   If, however, ubantu and linux have been just as popular as Windows, virus engineers would make infections for the o.s. too.     Although they no doubt, attacks are more frequent for the windows os.

  • computer does not start after the installation of vista updates.

    computer does not start after the installation of vista updates. Startup Repair is also not working. event name: Startup Repair v2, prob GIS. 1: automatic failover, prob GIS 2: 6.0.6000.16386.6.0.6001.1800, prob 3:6, prob prob 5 and 6 GIS GIS sig, 4:720907: corrupt file, prob GIS 7: 3221226021, 8:3, prob GIS GIS prob 9: repair wrp, prob GIS 10; 2, 0 s version: 6.0.6000.2.0.0.256.1. In addition, none of these advanced recovery options seem to work.

    Hello

    Try the steps suggested by David Y post dated November 2, 2010 in the link given below and check if that helps.

    http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/a6071159-db22-4076-b5d8-31f446dbdf32

    Hope that information was useful

  • BlackBerry Z10 my BB Z10 does not start after the no shutdown reason cannot go home screan

    Dear expert

    pls help my problem

    My BB Z10 does not start after the no shutdown reason cannot go home screan

    How can I save my data and contact if I reload / back up the operating system how ever my phone cannot start and go home screan

    Thank you...

    Dear expert

    Thanks for your reply, but recognized link bb cant he showed a black berries knowledge so the transferdata button is impossible / cannot click. so I can't back up my files and data if I reloaded the OS. are there\s any idea/way of backing up my files if my phne was frozen?

    Thank you

  • Does not start after the upgrade to 1.5.

    Does not start after the upgrade to 1.5.  "EdgeAnimate.exe - not found entry Point? -Point procedure entry GetGestureInfo is not found in USER32.dll dynamic link library. »

    All ideas

    No problems in the past with edge since September 2012.

    =============

    Laptop HP Pavilion dv7-2185dx

    Dv7-2185dx product name

    #ABA product number NV023UA

    Microprocessor 2.00 Ghz Intel Centrino 2 Processor Intel Core 2 Quad Q9000 processor technology

    The microprocessor Cache L2 6 MB Cache memory

    6144 MB of memory

    Memory Max 8192MB

    Graphic ATI Mobility Radeon HD 4650 (M96)

    Video memory up to 2815 MB (1024 MB dedicated)

    500 GB (5400 RPM) hard drive

    Multimedia drive LightScribe SuperMulti 8 X DVD±R/RW with Support Double layer

    17.3 "diagonal HD + LED display high-definition HP BrightView Widescreen Display (1600 x 900)

    Fax/Modem high speed 56 k modem

    Network integrated 10/100/1000 Gigabit Ethernet LAN adapter

    Wireless Connectivity Intel WiFi Link 5100AGN

    The Altec Lansing SRS Premium Sound technology with subwoofer

    101 keyboard compatible with the keyboard keys full size numeric keypad with integrated

    Pointing device touch pad with On / Off button and dedicated vertical scroll up/down pad

    PC Card Slots 1 Slot ExpressCard/54 (also supports ExpressCard/34)

    External ports

    5-in-1 Integrated Digital Media Reader for cards Secure Digital, MultiMedia Card, Memory Stick, Memory Stick Pro, or xD Picture Card

    4 universal Serial Bus (USB) 2.0, 4th port shared with eSATA

    2 headphone

    1 microphone input

    HDMI

    1 VGA (15-pin)

    eSATA + USB 2.0

    1 RJ-11 (modem)

    1 RJ - 45 (LAN)

    expansion port for computer 1 cell 3

    1 IEEE 1394

    irewire (4 pin)

    1 consumer IR (remote receiver)

    Other devices HP Webcam with integrated digital microphone

    Dimensions 16.2 "(W) x 10.9" (D) x 1.37 "(min H) / 1.70" (maximum H)

    Weight lbs 7,74

    Housing for Kensington MicroSaver Security lock

    Turn on the password

    Accepts 3rd party locking safety devices

    Software

    Operating system:

    Genuine Windows Vista Home Premium 64-bit with Service Pack 1


    Hi, people.

    I was able to reproduce the problem here, so the good news is that you're not imagining things.  We are looking in the options right now for you guys, and I will contact you individually by private message to start again at the top.  This being said, please note that our techniques, Vista is an operating system that is not supported, and our team is not stable time on this platform.  We will do the best we can and we will keep you guys, update as to what status is.

    Thank you

    -Elaine

  • Windows 7 32 bit does not start after the installation of the need for assistance

    I have an iMac 21.5 inches (mid-2011) with 8 GB Ram, 2 TB SSHD, new HL-DT-ST DVD - RW GA32N and tried to install windows 7 (32 bit) on using Boot Camp Assistant.

    I already downloaded and copied software 4.0.4033.zip Boot Camp here-> https://support.apple.com/kb/DL1630?locale=en_US for my 16 GB Pen Drive MS-DOS (FAT32)

    The installation was successful, and windows 7 loads just fine 1st time, I created UserID and password, settings etc... using the apple keyboard then installed the drivers from apple on this issue of my 16 GB USB key. Seems my Magic Mouse works but my keyboard is not detected

    Then I tried to restart so the changes would come into force, and since then my Windows will not start or run Windows 7

    Now if I start my iMac hold down the Option key, I get Macintosh HDD, windows, recovery 10.11.4 and DVD. If I select Windows or Windows DVD it starts Booting then black screen followed by this Message on the screen «Press a key to boot from the CD or DVD...» »

    If I press any button it starts booting from DVD and gives me the option to install Windows and if I do not press a button some then nothing happens

    Windows does not start a BootCamp HDD and I'm left with no option but to press on the button / stop to stop iMac.

    Fortunately my El Capitan works well, but my Windows will not start. I tried 2 times install windows 7 32 Bit on my BootCamp HDD.

    So any help, I do not understand what am I'm doing wrong, I would be really grateful if someone who knew bootcamp can guide me so that I can run Windows OSX on my iMac.

    Thanks in advance.

    Remove the DVD, boot in OSX and after the release of the following Terminal commands?

    diskutil list

    Cs diskutil list

    sudo TPG - vv - r see the/dev/disk0

    sudo fdisk/dev/disk0

    The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

  • T400 does not start after the first display screen

    What is going on? I have wss to work today and my computer shut down due to the low batt. I got home and plugged in and waited a few minutes and turned on. When I checked swipe my fingerprint, all that I saw the first startup screen told me I want to interrupt normal off set up that I can close the button think vantage. It is stuck there. I can activate it on and but it does not start after that screen. What can I do? I am in the middle of the drafting of the report and cannot access my docs!

    I looked the problem and found that have been in contact with the usb pins! Yay the prob is fixed!

  • HP elitebook 2540p does not start after the successful bios update

    Hello people,

    I need your help.

    my hp elitebook 2540p with 2.5 "hhd does not start after a successful bios f.03 to f.24 upgrade done through windows 7.

    When I turn it on the blue light of wifi and power is on but nothing happen.

    I tried to remove the chip from the bios, cmos, hdd, ram, wifi battery... all, but nothing doesn't happen.

    I also tried to start it with the victory + b procedure and win + procedure four arrows so without USB key the caps lock flashing indefinitely but nothing happens, only the fan works quickly with a blue light

    with the USB the system restarts itself every two seconds and I have to remove the USB key.

    I do not know how...

    Thanks for any help.

    Luigi

    all very well now. I used the f.20 rom based on the internet and everything works again.

  • Computer does not start after the screen goes blank &amp; Compaq.

    Hello

    A few weeks ago, I turned on my PC and it showed at the Compaq screen and then went to a blank screen & would not respond. I held the switch button to turn it off and after 4 attempts, it start fine. Next time, it took 20 attempts to initialize and now it does not start, it will be maybe if I try like 100 times he can do... The problem is when the Compaq screen comes up it comes only for like a second so I know that it does not start, if the Compaq screen stays for a few seconds as 3 + I know it will load windows and start.

    History > the computer originally had XP and has been replaced with VISTA memory was 2 * 512MB, but it was a bit slow and I was advised to upgrade. I bought 2 * 1 GB memory and put it in my PC a few months there may be 5 + had no problem so far.

    I tried the following:

    Remove the memory and replace it. Remove the 2 * 1 GB of memory and its replacement by the Moose 2 * 512MB to check if the memory is at fault.

    Cleaning of the dust around the fan (at this point, I removed the fan over the CPU and cleaned the thermal compound from the CPU to make it nice and shiny, only tried to start one time after that for a few seconds heard blowing fan and turend it took off. Depuis_lors, I realized that it wasn't just muck and had a purpose na derwiche put a little more on)

    Remove the battery of the BIOS for half a day

    Move jumpers CMOS from1, 2 to 2, 3 positions

    I can not get into the same if BIOS start and hold F1 he will show me the BIOS for a second and then go to a black screen.

    Specifications of the computer

    Compaq Presario SR1629UK desktop PC

    Details can be found in the following link

    http://support.HP.com/us-en/document/c00579251

    Your help would me much appreciated...

    Hi guys,.

    Thanks for your help, I wanted to just give you a batch update. After the grueling process of verifying the destop, memory suppression, cleaning it & all the other techo checks. I gave my pc to somone to look to the he tried not to turn on he opened it removed cleaning my thermal paste back on and told me it was working fine.

    When I bought home all happy, I realized that I had the same problem, I borrowed another monitor and found it worked well! So the question is with my monitor, if anyone has the same problem first check another monitor.

Maybe you are looking for