Acer w3-810: heating problem &; touch stops working after a while.
1 year warranty, 810, Acer w3 expired, the Tablet is showing heating questions now, close the camera back and after a while to the touch stops working, touch works fine on reboot and compressed is cold. When the Tablet is connected to a network to the touch stopped working earlier than when not connected.
to solve this problem:-J' I reset the windows. which increased the length of time in which the touch works but always to the touch stops working after a while.
I disassembled the Tablet and found that the part that is overheating is memory [h9tknnnbpdma].
What shoul I do, what I need to change the digitizer, software or any better solution?
the problem was solved when I disconnected the cables of the digitizer and then reconnected.
Tags: Acer Tablets
Original title: keyboard and mouse problem
My keyboard and mouse either do not work at startup, stop working after awhile, sometimes after a few hours or sometimers causing me to push the button Reset to get out every 10 minutes is on the line of support from microsoft for two hours, cost me £65, but still not fixed
Pentium I5 dual core 2 x 500 GB disks 5700 chart logitec gaming mouse and keyboard
Thanks for those tips, I've considered that everything that had happened in the last weeks and remembered that my mouse was the first to show signs of problems when the red light on the bottom went dark and brilliant then a few times.
I swapped the front mouse with a type Wireless and it seems not however solve the problem since replacing it with a different mouse to lead the problem disappeared. In my view, that the old mouse has a hardware problem that shorted supplies USB causing both mouse and keyboard stop working.
allowed for a few days, so I guess that was the problem.
Thank you for your support
I bought a HP Paviliion TouchSmart 23 - h056 all-in-one new and the touch screen worked flawlessly. I then installed a 7520 of HP Photosmart all-in-One printer/scanner/copier and the mouse pointer works on screen, but to the touch on the screen no longer works. The system came pre-installed with Windows 8.1. Help, please!
Hi and thanks a lot for your suggestion and the quick response! It was the same driver.
Finally, what has worked, it was that I had tried a reboot, but not completely executed a stop down and pressed the button at the top of the screen to turn it off. I then pressed the button to turn it back on, and then worked on the touch screen.
You are very kind and competent. Thank you.
I used my TECRA M2 a year without serious problems. A moth started it my problems with audio - after the start (no matter if via boot or wake up from hibernation) his (speakers) system is functioning normally. After a while (several tens of minutes, hours) sound system stops working (no sound from your speakers or headphones). No errors appear, but not sound. When you try to adjust the volume via the Windows icon on the bar the task CPU usage becomes very high.
I decided to reinstall my M2 - the first attempt was clean install of WinXP SP2 standard support - sound problem has not changed. Today I decided to restore the system recovery CD, but the result is the same :-(
Any idea? -I suppose that problem Council... Now, I made a mistake when entering - beeps system (such a beep as during startup) - interesting :-/
Except sound problem - another strange thing - when I send my XP to restart in about 10% of the attempts he goes off and does not start. Starts normally after pressing power button...
Any ideas would be much appreciated
Looks like a hardware malfunction.
Maybe it s caused by overheating.
Check the cooling modules and try to clean it with the vacuum cleaner.
If it doesn t help you should contact the Toshiba ASP.
Whenever I connect Windows live I get a message that this communication platform on-line Windows has stopped working and windows will close the program and I am started mid convo quickly. I do not know why this happens, I just reformat my computer and had to reinstall windows and have this problem since. I even tried to uninstall and reinstall new but no luck. Help, please!
You should post in the Windows Live help as Mick has suggested. They will come back with help.
However, in the meantime, you can do a repair on your own.
Have you installed programs before this problem started? This may include antivirus, e-mail programs, etc.
I've seen some posts where some products Antivirus and cause of conflict. So as a troubleshooting step, remove your antivirus (not just disable) and see if there is a conflict with your AntiVirus and Windows Live messenger. (Do not forget and don't go out when you do not have an antivirus installed on intenet).
If that doesn't help, then do a clean boot and see if there is a conflict. You disable all startup items and services of third parties at boot. This method will help us determine if this issue is caused by a loader program or service.
KB 929135 - how to solve a problem by performing a clean boot in Windows Vista or in Windows 7
I hope this helps.
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
-Very well, so I have the camera is plugged in and its detected with the drivers installed and so on. When I start using it, it will work for a good 5 to 10 minutes then stop working and the computer unplug chim will ring and his is no longer detected by my computer for an hour or so he comes back...I'm using windows 7 64 x an idea?
(1) don't you make changes to the computer until the problem occurred?
I suggest you to follow the steps below and check if it helps:
Method 1: Try to run the hardware troubleshooter and check what the problem is and fix it accordingly.
Follow the link below a convenience store opened.
I suggest to return the item and try to run the troubleshooter and check if it helps.
Tips for solving common driver problems:
Automatically get recommended drivers and updates for your hardware:
Hope this information is useful.
I tried without success to use this device to connect my second monitor. It works for half an hour, give or take and then nothing. I unplugg and plug in my lap and he does it again, and I repeat the cycle until what I got too frustrated. I go into devices and it shows all of my devices do not work correctly, but this is not the case. I returned a cable and got a new one, but the problem persists. Anyone else having this problem until I disconnect everything and walk to the center of Micro.
- Is what type of camera?
- If you use a different USB port it works?
- Are these USB ports on the USB powered monitor?
Please answer back with more information that helps us better understand the issue.
In the meantime, I suggest you perform a clean boot and see if the problem still occurs in the clean boot state.
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
The audio of my Hp envy 6 t-1000 (windows 8) stopsworking after awhile. The audio comes back if I restart the laptop. I tried to reinstall the drivers updated and final audio but problem stays. Any help is appreciated.
Try the following.
Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.
Locate the KB2962407 update, right click and choose uninstall. Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates". You will see the update that you have uninstalled just offered once again - right click and select "Hide update".
After that you may or may not need to remove and reload the sound driver - if you do, how to use Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.
DP - K
USB modem stop working after long time and I have to unplug then plug it in again, I want to solve this problem without unplugging and plug?
· You follow the steps in the article of my previous answer?
Follow these steps in my previous answer and at the same time this article, follow these methods.
Method 1: Follow the steps in the article.
Method 2: Update the latest drivers for chipset.
My touch screen stopped working after updates of Windows on my laptop froze. I went through all the parameters of the pen and touch, and others to resolve this issue, and unfortunately it still does not. I also rebooted the laptop to factory settings and update all the necessary things in the software updated and updates on the HP site recommended and I've updated the BIOS, but still the touch screen does not work.
I hope you can help.
According to the message that you have recently published, I want to confirm that this could be a hardware problem and I highly recommend to Contact HP immediately technical support by phone for further assistance immediately to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer
You can also check your warranty here to check the status of the guarantee
Hope this helps, for other queries in response to the post and feel free to join us again
* Click on the star of CONGRATULATIONS on the left to say thank you *.
Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.
K N R K
Although I am an employee of HP, I speak for myself and not for HP
This is the best advice ever! I tried and immediately was saved! Thank you!!
For laptops Asus on Windows 8 - actions no longer work after sleep on touchpad
- Open the Task Manager, look for the "Asus Smart gesture Center" process Complete the task.
- Script: Create a .bat somewhere file with the following code:
Taskkill /IM AsusTPCenter.exe /F
When you run the bat file, it will kill the process.
Both: when to end the task, that it seems that the other process from Asus running it will detect it and start it, allowing the multi-doigt touch again.
To make the batch file:
- Open Notepad and copy/past this command:
Taskkill /IM AsusTPCenter.exe /F
- Then click on save as and type .bat (remove .txt)
- Replace all files . the drop-down list and click Save
That's all! Whenever the problem appears, double-click the file and it will fix it!
Thanks to Teknokraten @ superuser.com for this solution.
I am so grateful for your help! I had the same problem that my touchpad stop working after the mode 'sleep'. I had the problem over the years and no one could help me. And it worked! So thank you very much!
iPhone more replaced 6 speaker stopped working after update to iOS 9.3.4.
New speaker of iFixit. After replacement speaker works perfectly. With FaceTime, the call, music, etc. And IPhone running on iOS 9.3.3. But after the update to IOS 9.3.4 speaker stopped working. Several restarts and total content and deletion of parameter did not help.
New speaker of iFixit.
It is a problem.
iPhones are not serviceable by the user.
You're on your own. After this service yourself, you finished your warranty (if she was still in effect), and Apple will not help you either.
Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated. No difficulty to make it work?
Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated.
I tried to reset firefox and search for similar problems, unfortunately found nothing.
It is also weird empty space before the address in the address bar
other extensions and addons seems to work very well.
Firefox 30 spent some less commonly used "Always turned on" plugins "asking to activate. To check and change this to TrueSuite, you can use the page modules. Either:
- CTRL + SHIFT + a
- "3-bar" menu button (or tools) > Add-ons
In the left column, click on Plugins. Then on the right, check the setting on the right side of TrueSuite.
Note to other readers: the original poster had to leave Firefox and start it again until it is actually entered into force.
Firefox has stopped working after the upgrade to version 27. I reinstalled 26, it's been a while so I thought that the problem had been sorted out, so today tried to install the latest version. Same problem as 27, just does not work when you click it. I have Zonealarm later, and I have disabled all the internet security, control applications and anti virus. The same, followed instructions to remove firefox so reliable programs it tempt me the fact still. But there is no prompt . As a last resort, I uninstalled Zonealarm. Still does not work after a new installation.
I am a website developer, and all my tools are on Firefox. Chrome never problems with the update, so what is happening here? Surely with the power of Mozilla, that sort of thing shouldn't. AM also on XP SP2 which deserves to be supported on the nocturnal compilations, I just read (cannot upgrade to SP3 for compatibility with other software).
New version looks ace, so please help.
It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.
Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.
Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.
I use an iPhone 6 Plus. Fast response for 3rd party applications, i.e. Whatsapp, Viber etc has stopped working after the update to IOS 9.3.2. I have all 3 keyboards left installed & I use the latest version of Whatsapp. Quick response works very well with iMessage.
I restored the phone & quick response worked briefly, but has stopped working again. I contacted Whatsapp, but their response has been that it is a problem with IOS.
Quick response on 6 of my partner more running IOS 9.3.2 works very well with Whatsapp & my settings are the same as hers.
I had recently spent with an alphanumeric password to strengthen security on my iPhone when the problem of the quick answer appeared. I've since discovered that switch it on a digital 4-digit password solves the problem.
Maybe you are looking for
I have a laptop Equium A200 and the hard drive is fried. That's why I need to get a replacement of operating sysytem.My records are in England and I'm at the Canada! How can I do this? Thank you
... Hi, first, my English is bad... :D I have a problem - I bought the Toshiba Satellite P200-1BAAfter I bought the laptop, I reinstalled the operating system (recovery DVD 1 time)-j' have audio, but I m missing the settings for the subwoofer + virtu
I have this laptop and just bought 3 u2414h for dell monitors. They are supposed to support dp 1.2 chaining, but I was not able to make it work. Dell support has been atrocious. The only reason I can think that it does not is because my laptop does n
Trying to attack a NIC with the command prompt "arp s 010.010.014.100 00-20-4A-0B-1B-6B" and continue to be "ARP entry addition failed: 5" message.» Anyone know what this means?
Hello Is it possible to change the color of the text on the main screen, I went to keyboard/screen/Options/and their no way to change the color of the text. I changed the theme on the main screen, which is a clearer picture, now I have problems readi