Acerc720 screen is still very low and will not light

I have an Acerc720 that has been discontinued (student), and now the screen will not light up. I tried the suggestion of recommended powerwash here and also checked to see if the function keys have been activated (not an easy thing to do with the dark screen). Nothing helps so far.

Any other suggestions?

Hello

Connector to cable/LCD CHEK the EDP as thos:

  1. Unscrew the screws of the bottom
  2. Drop the bottom
  3. Disconnect the battery from the motherboard
  4. Remove the LCD Panel
  5. The LCD connector is located in the Middle under the black ribbon. Check if it is correctly inserted.

If this doesn't solve your problem, the LCD is faulty.

Tags: Acer Laptops

Similar Questions

  • Accidentally touched a button on my keyboard and the screen is too low and will not brighten

    Hello thereeee, uhm, I played a World of Warcraft and I tried to hit the numbers and went too far up and hit one of the buttons above the numbers then my screen was suPER low and I mean really dim. And I can't make it bright. I have a Lenovo computer with an Intel processor and Windows 8, and no matter what I press it will get more light. The battery is full and I tried to restart my computer, uh Yes, please answer quickly. I need to play more WoW, thanks k.

    Jesse xx

    I fixed it, finally!

  • I have updated to iOS to 9.3.1 now my screen is in portrait mode and will not change landscape when the phone is turned. Also, it just goes straight to voicemail without ringing on my end when people call. All I can say all the settings are correct. ideas

    Looks like my question may have been corrupted.

    I updated my phone to iOS 9.3.1 last night. Now all my incoming calls go directly to Voicemsil without ringing on my end. My sound and message settings appear normal for me. Also, my screen rotates out of sight from portrait to landscape view for photos FB etc...

    suggestions to solve problems?

    It seems that if you have the lock of portrait and do not disturb activated. Swipe up from the bottom of the screen to call the control center. Look at the two circular icons on the top right row. They are white? If so, tap on them to turn them off. One resembles a Crescent Moon, the other as an arrow in a circle with a padlock in the Center.

  • Icons are very small and will not return to normal size

    Icons have become very small and won't return to normal size. How can I fix it?

    Hi chance37,

    ·         Did you do changes on the computer before the show?

    Follow these methods.

    Method 1: Run the fixit of the article.

    Difficulty of broken desktop shortcuts and common system maintenance tasks

    Method 2: Perform a System Restore and check if the problem persists.

  • Satellite L500-19 x - is automatically disabled and will not light

    Hello
    I was in the middle of my review using my laptop stated above, when it is just off, it was plugged, it wasn't the battery for this purpose. But it does not ignite again, I disconnected from the grid and normally when it is running on AC it will acknowledge this with a light, but doesn't work. Also when I push the power button or network it will not turn on.

    I bought the laptop in December 2009 and it happened the first week I had, but the computer was warm to the touch and more heated theresfore, but this time the laptop wasn't hot yet and that he had been on 1/2 hour. I decided to leave a few hours and when I tried again to the base of the laptop is cold to the touch, but it not always light.

    I was wondering if someone could help me understand what's wrong with it

    Thank you very much.

    Hello

    There's LEDs, while the AC adapter is plugged?
    If this isn't the case, then there could be something wrong with the AC adapter or the mother for laptop.
    But if you are sure that the adapter is 100% ok, then it might be a problem with the laptop.

    It is difficult to say what might be wrong here as mentioned; If the LEDs shine t n, then mobo could be affected if the power LED to, then you should check the bars of memory in some cases the laptop would be light not because of faulty memory so it s certainly worth a check

  • I get a pop up screen I need, but the screen is very low and does not allow more than 1 line of information while IE shows the window contextual integers of 27 lines

    I play games that allows me to send gifts to your facebook friends and when I click on send gift, a screen with the names of my friends will be displayed so that I can select the ones to send to... but since yesterday morning, the pop up screen using firefox became so weak that it allows only one line and it does not allow me scroll more than 5 times... While the IE pop-up window shows 27 lines at once, and I can scroll the following 27 and so on... I have pictures of the screen if you need...

    You should be able to resize the window pop - up to enlarge.

    You allow sites resize the popup window?

  • Had cracked screen but the phone works still. Today screen is become white, and the phone rang again.  Did hard reset and now the phone is completely turned off and will not be exposed - not even the Red of the battery is displayed

    Had cracked screen but the phone works still. Today screen is become white, and the phone rang again.  Did hard reset and now the phone is completely turned off and will not be exposed - not even the Red of the battery is displayed

    He broke. Make an appointment at the genius bar and get it fixed / replaced. There is no magic words that will do well.

  • Satellite Pro L450D black screen and will not respond to any keys

    Hello

    My niece has used his Toshiba L450D for almost a year now and he really liked it, who was until last month. She turned on her laptop and when she presses the button of the mouse, the button cracked and he fell into the laptop.

    Now my brother contacted Toshiba and I was told because it is under warranty it might return for repair because it was a common fault. Then he he packed in loads of air bubbles and a box to make sure it was safe.

    A few weeks later he came back repaired but we were all shocked that the laptop was put in a very loose box and you could hear this rattling noise. When we turned on the battery was flat and we had a new boot menu.

    As she installed it Windows 7 laptop would boot directly into Windows 7, but now after the repair of the laptop shows a menu black screen with as follows:

    + Windows 7 +.
    + Recover Windows to Factory Settings [active EMS] +.

    So we started in Windows and everything went well, but now after 5 or 10 or even 20 minutes, laptop displays a black screen and will not respond to keys or mouse movement. There is nothing on the screen its just black.

    I started in SafeMode (which was more difficult with the new menu) and it does the same thing. I even managed to do a virus scan quick who took 3-4 minutes and was clean.

    I would like some advice on what my niece is very angry, and it's difficult to explain what is happening to a child in the primary school.

    Any help would be grateful.

    Hello

    Have you tried the option of HARD drive recovery?

    If this is not the case, try to set the notebook back to factory settings using HARD drive recovery.
    Turn on the device, press F12, choose repair my computer, then select Toshiba HDD recovery.

    I hope it will work!

  • I accidentally put 100 files on my desktop and it went to black screen and will not work

    I accidentally put 100 files on my desktop and it went to black screen and will not work

    Hello

    Following methods and check if that helps.

    Method 1:

    Step 1:

    Start your computer in safe mode and check if it starts very well.

    Step 2:

    If the system starts in safe mode, then there would be a third-party software, causing the issue to occur. I wish that you start your machine in a clean boot State. Clean boot helps eliminate conflicts of third party software.

    Note: Follow step 7 to your computer as usual.

    Method 2:

    If this does not help, you can perform System Restore in safe mode.

  • I have just downloaded/subscriber to photoshop and paid the annual fee.  Following purchase, my very first time to load the Client creative Cloud, the app closed and will not reopen.  I can't locate the original location of the purchase binding, so now I'

    I have just downloaded/subscriber to photoshop and paid the annual fee.  Following purchase, my very first time to load the Client creative Cloud, the app closed and will not reopen.  I can't locate the original location of the purchase link, so now that I'm just try the 'free download' option.  Still crashes the Client Creative.  I upgraded to Yosemite.  Same thing.  There, anyone have a suggestion for me?  Thanks in advance.  Frustrated and at $119.

    Login on Adobe.com with your user ID and the password manage you account to see if your subscription is here. If it's usr Adobe cleaner for the installation of the creative Cloud Desktop application.  It allows to download, install and enable you to creative cloud applications.

    The Adobe Creative Cloud Cleaner tool allows to solve installation problems

    Download Adobe Creative cloud apps | Free trial of Adobe CC

  • I had to change my Apple ID because of accusations of fraud but my iPhone 6s 9.2 still has the old Apple ID and will not accept old or new passwords. How can I update the iPhone with the new Apple ID 9.2 6s?

    I had to change my Apple ID due to fraudulent charges but my iPhone 6s 9.2 still has the old Apple ID and will not accept old or new passwords. How can I update the iPhone 6s 9.2 with the new Apple ID and password? I tried to perform a complete reset, but which requires the Apple ID and password that doesn't work not... pretty frustrated here.

    YYou have unlink the old iphone you as find my iphone the reset all devices on this subject from your account then plug it to your iTunes then restore a new one after that reset password that under the new phone then connect

  • I had a paper get stuck in my printer 1310 series. I disabled the jam but it is still showing as a paper jam and will not display 6 documents in the queue

    I had a paper get stuck in my printer 1310 series. I disabled the jam but it is still showing as a paper jam and will not display 6 documents in the queue

    If it still shows paper jam and you know that there is no paper, just turn it works, and it should realize that there is no paper.

  • When I try to start my laptop, it goes to the Acer logo screen and will not boot Windows 8.

    Acer E5-471

    When I try to start my laptop, it goes to the Acer logo screen and will not boot Windows 8. Only a black screen and mouse pointer appear. How can I solve this problem?

    Hello

    1 power off the device
    2. power on and immediately keep taping Alt + F10, unit will start to recovery, choose Exit & continue to windows. Post back if I helped

  • My installer of windows is damaged and will not install office 2007, I tried the fixes, but still get error 2

    My installer of windows 7 is corrupted and will not install office 2007, I tried the suggested fixes but still error 2 in windows install when I hit start

    How can I get this problem... Thank you

    Well, I don't know what patches you have tried.

    Troubleshoot Windows install

    2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer

    http://support.Microsoft.com/kb/2438651

    Substitute:

    Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

    1. in the menu 'Start', click on ' execute:.»

    2. in the "Open" box, type "msiexec /unreg", and then press ENTER.

    3. in the menu 'Start', click 'run '.

    4. in the "Open" box, type "msiexec/regserver", and then press ENTER.

    or

    Click Start Orb, in the box, type search: Regedit.

    Highlight: HKEY_lOCAL_MACHINE/SYSTEM/CurrentControlSet/services/msiserver

    Verify that the SYSTEM account has full control. If it does not, add the SYSTEM account with full control.

    Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

    Also:

    Click Start
    Type: CMD, according to the results, right-click CMD
    Click on "Run as Administrator"
    At the command prompt, type: sfc/scannow

    This will check for any breach of integrity

    Restart your system

  • Now when I open my email in Outlook Express, it opens in full screen and will not restore down on a smaller size. How can I reset that?

    Already when I opened my email open in small size.  Now when I open my email in Outlook Express, it opens in full screen and will not restore down on a smaller size.  How can I reset that?

    Then, you need to ask in this forum I posted above. I have not used it myself and can be useful.
     

     
     

Maybe you are looking for