Acquisition of data into a laptop card?

I found that this PCMCIA card does not fit into my laptop (lenovo ls400) which has only express card slot, I was trying to find any DAQ card that is made in express card, but I couldn't find one, I was wondering if I need to find some cards or something, I read somewhere in this forum, saying using the adapter does not guarantee performance... what shoudI do? ther is not possible to use a PCMCIA card in my lapot unless I use an adapter...

have you considered a usb data acquisition?

Tags: NI Hardware

Similar Questions

  • Acquisition of data using the DAQ card

    Hello everyone

    I need assistance with the acquisition of data of the generator of signals through DAQ cards. I plugged the signal to the SCB-68 generator where the analog inputs of the generator are connected to AI CH5 and AIGRND of the Terminal Board. Then the output of the block is connected to the DAQ card. The maximum sampling frequency of the card is of 250 kech. / s. The problem is for reason that I am not able to see the waveform on the labview. I looked at other examples to find the problem, I am, but I am not able to understand this. I want to be able to choose the sampling frequency. I attatched my code as an attatchment for you all to help me know what the problem is. Any suggestions will be appreciated.

    There is no task!  You have not specified any hardware (i.e. your data acquisition card) anywhere.

    Here's a suggestion.  MAX aperture.  Find your DAQ hardware.  Open a Test Panel.  Implement a continuous sample of N Points to some sampling rate.  Press Run and convince yourself that you get the data.

    Now, while remaining in MAX, to create a task, using the same settings.  Call for example something sensible ("MyFirstDAQTask" is not a good reputation).

    Now, go back to your code.  Eliminate the first two functions DAQmx.  Wire a constant task to the DAQmx Start feature.  See the little triangle down?  Click it, and it should show you the tasks he 'sees', the only one should be the task that you created in MAX.

    Note that 'Samples Visible' is now 'hard coded' in the task.  To get its value back out, you need to put a property node Timing DAQmx after the task start and pull on the quantity of the sample, samples per channel (which, for reasons that escape me, is a Dbl, you need to convert to an I32 before importing it into the while loop).

    Bob Schor

    P.S. Thank you to join your code.

  • What type of connections I do for the acquisition of data PCI 619 card pins? What I have to give it to the ground and the CCV on the pins of the connector myself? What should be the value of the SCR I need to give to the PIN?

    I have a PCI 6519 data acquisition card. I want to install it on the PC and use it outputs to control a robot. I have problems with the connections to the terminal block which is attached to the cable.

    What type of connections I do for the acquisition of data PCI 619 card pins? What I have to give it to the ground and the CCV on the pins of the connector myself? What should be the value of the SCR I need to give to the PIN?


  • "Please insert disk into drive F:" when you try to view files on a 4 gb SD card inserted into the laptop

    I bought a new SanDisk 4 gb SD card and inserted into my laptop after taking pictures of my camera. When I try to view the files, I get the above error message. It seems that many people have this problem, and other responses, it's a hardware problem - which I don't believe it's in my case, because it works fine in my camera and the Nintendo DSi XL. Any suggestions are appreciated. CHeers, Jherio

    I bought a new SanDisk 4 gb SD card and inserted into my laptop after taking pictures of my camera. When I try to view the files, I get the above error message. It seems that many people have this problem, and other responses, it's a hardware problem - which I don't believe it's in my case, because it works fine in my camera and the Nintendo DSi XL. Any suggestions are appreciated. CHeers, Jherio

    ========================================
    If it's your Media Player SDHC card is perhaps not compatible.

    Try to connect to the camera via a USB cable and see if you can download the files.

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • How do I update my laptop so he sees my micro sd card, I inserted into my laptop, but it did not come

    How I update my laptop so he sees my micro sd card, I inserted into my laptop, but it didn't come up.

    help much appreciated.

    Hello

    Thank you for visiting Microsoft Community.

    According to the description, I understand that the problem with you want to update the laptop so that it can recognize the micro SD card in the computer.

    Of course, I understand the inconvenience and will try my best to help you.

    In order to understand the issue more clearly, please provide me the following information.

    1. What exactly happens when you insert the micro SD card in the laptop?
    2. Do you receive an error message? If Yes, what is the exact error message and the error code?
    3. What is the brand and model of the laptop?
    4. How you try to connect the SD card? Is inserting into the card reader on your computer or you are using an external card reader?
    5. You see an error message or the exclamation point in Device Manager when you connect the SD card?

    I suggest you follow the steps how to check for the exclamation point in Device Manager.

    1. Click on Start and go to Run.
    2. In the prompt to run it, type devmgmt.msc , and then click OK.
    3. Device Manager opens.
    4. In Device Manager, double-click the device category.
    5. Check the yellow exclamation point against each category.

    It is possible that this problem would have occurred if the chipset drivers are not updated in the system.

    I would suggest trying the following methods and check if it helps.

    Method 1:

    I suggest you to update the Chipset drivers on the manufacturer's Web site and check if it helps.

    If the problem persists, please follow method 2.

    Method 2:

    Try to run the built-in troubleshooting utility and check if it works.

    Open the hardware and devices Troubleshooter, please follow the steps in the link provided below.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Note: If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

    I hope this information is useful.

    Please let us know if you need more help, we will be happy to help you.

    Thank you.

  • How to block a number of cardboard/acquisition of data to a particular program?

    Is it possible to "connect" a DAQ card serial number with a Labview design/program?

    For example, PCI-6601 is a serial number 12345 and I write a program (called ProgramABCD) to the acquisition of data, I want to "tie" / "bind" 12345 and ProgramABCD together, so that ProgramABCD will not work on an another PCI-6601 (unless I have change the serial number corresponding to ProgramABCD for the new PCI-6601).

    Thank you.

    Hi celine,.

    You could read the serial number of the device programmatically using a node property and then based on that, decide whether to terminate or continue the program. See this link: http://digital.ni.com/public.nsf/allkb/92F3F7C79579FA238625718700764F9D?OpenDocument

    However, if this will be distributed to the end user as a .VI file not an executable, then the end user could always go into the code and change/modify it so that it can use different devices with it.

  • "Info product programmed into the system card is missing or not valid card system:

    Info product programmed into the system card is missing or not valid card system:

    The OOA product name,

    OOA serial No.,

    OOA product #.

    System OOA board ct #.

    I get this message every time I start all of a sudden. What it means and how to fix it? I just bought this laptop from staples are about 4 months!

    Jenn121 wrote:

    How to send the unit into operation? I was given assurances on this matter of Staples, can I put it to return? Or I'm doing something else?

    Your 1 year warranty is HP and no store, but I do not know if they accept your laptop for service. You can use HP support (phone/Email/Chat) and connect to a case of this problem and directives on service will be communicated to the customer service you HP.

  • Difficulty to read the instrument of series and acquisition of data simultaneously.

    Greetings,

    I have some trouble getting my VI read from my data acquisition and instrument of the series at the same time.  If I run the Subvi simultaneously (i.e. subANG runs in a window and subVEL is running in a second window) both return the correct values and behave as I expect.  However, if I call the Subvi in a society mother VI and try to run them both in the same loop structure subANG gets stuck and won't be reprobed with a signal change.

    I also tried to use a stacked sequence or plate to separate the execution of subVEL and subANG, but I still get no response to subANG.

    The point is is that, if I run Parent.VI in a single window and then creates a copy of subANG (call it '--copy' or other) and run it in a second window, Parent.VI behaves properly and will update the readings as they appear in '--copy '.

    I enclose 3 files.

    (1) subANG.VI - this bed an an inclinometer RS232 signal.  The signal is refreshed every 10ms or more.

    (2) subVEL.VI - this bed raw tension of a channel on the acquisition of data, calculates the average then that converts into a pressure difference and finally a speed based on the pressure and temperature inputs.

    (3) ParentVI.VI - they simply call and displays the Subvi

    My guess is that it's a buffer problem, but I am confused.  Someone out there in Labview Earth knows why this might be happening?  Suggestions welcom.

    It is not an instrument of series.  It is a UEI PowerDAq with their typical A/D and the cable.

    I found away to make it work by placing subANG and subVEL in some time different loops side by side in ParentVI.

  • Acquisition of data stops at data acquisition

    Hello

    See the attached VI.  Data acquisition acquires data without problem for a few minutes, and then suddenly the event structure does nothing but the timeout.  I'm deliberately ignore the 200279 error that is generated when two triggers are too close to each other, because I want to just ignore these triggers, but perhaps which also prevents tasks at a certain time?  I also tried to start and stop the task again in the case of timeout events, but it does not help (it causes an error).  Is there a way to prevent either the DAQ card (I use the box USB-6251) of the judgment of the data collection or a better way to ignore triggers that are too close together?

    I hope that I am making some sense here :-)

    Thank you

    Jeremy

    Jeremy,

    Thanks for letting me know about the 99% CPU usage.  It is definitely the cause of your accident and can be avoided by putting a funtion waiting with maybe 10 milliseconds in your timing loop.  However, if you want to keep avoiding strict with no node blocking, you will need to restructure your VI to use the Express VI of time elapsed since the range of Timing.  You will find examples of the use of this VI in detailed at the bottom help.

    Hope this helps, have a great weekend!

  • Limit the audio via the acquisition of data, what is the analog output rate of the pci-6014?

    Hello

    I'm trying out audio buffers thanks to an acquisition of data pci-6014. Audio files normally have a sampling rate of 44.1 kHz, but I noticed that when I try to exit, at this rate, that I get an overflow error. I checked the datasheet and it shows a rate of output of 10 K samples per second, way too slow!

    This device 6014 is quite expensive but are still unable to a stereo sound output signal... ? Is there a way to bypass this limit? It is not sensible to pay $1000 one another.

    See you soon.

    I don't think there is a way to increase the analogue of rates. The 6014 is old enough. A better card and cheaper, would be the 6221.

  • I have an Iconia One 7, how do I access data on the SD card?

    Hello

    I put data on an SD card and then inserted into the tablet... Tablet recognizes the card, now, how can I access the data from the SD card?

    Kind regards

    Larry

    on the list of applications, you just named "file manager"?

    You can browse the contents of the SD with it.

    If this isn't the case, you can download one for free:

    https://play.Google.com/store/apps/details?ID=com.EStrongs.Android.pop

  • Sun disk MemoryStick pro duo does not fit into the laptop

    My disc solar memory stick pro duo does not fit into the laptop Envy nor the memory stick duo adaptor. How can I download my photos?

    Hello

    Whay is your cell phone? Many of them does NOT support memory stick family devices. You can connect your device to your computer OR you can go out and buy a card reader (USB connector, for about $ 10 to $ 15) that supports the USB key and plug it into the USB port on your laptop.

    Kind regards.

  • How to put restrictions into the laptop using the domain?

    Hey! I want to know how to put the restriction in my laptop using the domain. While I may restrict the use of the USB into my laptop?

    Can U help with this.
    Kaifi Asif

    I am not sure that the use of a domain is specific to the type of restriction being attempted.

    A pindrive is usually a USB type device that is inserted into your local system. With this ability, or other devices can be inserted and used. Areas tend to assign all of your computer to a specific network, usually hosted by your company or the cloud. Areas rarely restrict the use of the material.

    For material restrictions, your company or other provider will usually deploy a security product for your local device. It can be configured to prevent the use of the spindle-disks, external hard drives or other types of media that allow the storage and retrieval of information; all by allowing the use of devices without storage type (types of wireless keyboard/mouse).

    Of course, Windows 7 allows you to join a working group and which allows sharing data from other systems, but is not a network "domain." Those are centrally managed by network/firewall servers and network administrators.

    If the device is a personal device, then there are products that can be purchased allowing the locking of the external media storage devices; they run at first upward and once installed, don't allow external storage devices to use once it is uninstalled. All this happens in the background.

    There is however a very radical measure, and this is to turn off the USB port at the hardware level. This however, would prevent ANY type of USB device to work in this port. This type of restriction is probably is not the right course of action.

    I hope this helps...

    Good luck!

  • I have announced a new drive hard into my laptop so i that no picture can now connect you and try to get my pictures back

    I have announced a new drive hard into my laptop but I lost my pictures is possible that I can recover by logging into the windows photo gallery

    When you replaced the hard drive, everything that was in the old man disappeared. Of course, because he's gone.

    Reinstall your photos from the backup that you made before you replaced the hard drive. Oh, you save all of your date? Oops!

  • difficult to manually enter data into health

    with the last update apple has made it very difficult manually enter data into health app... I'm not talking about sugar in the blood or the weights every day entered manually as my personal info that does not normally change

    Launch the health application and then press update medical ID.

    For example, on your birthday, tap the box just to the right of the birth Date of edit.

    Use the app on your iPhone or iPod touch - Apple Support health

Maybe you are looking for

  • How can you UN-don't forget a saved password?

    How you unremember a password on firefox 5?

  • Error code: 800F0A12 (impossible to install Win 7 SP1)

    Hello; I currently have problems installing with SP1 for Windows 7 Ultimate 64-bit. Code 800F0A12 Suggestions to solve this problem would be appreciated. Model: Intel (r) Core (TM) 2 CPU Quad Q6600 @ 2.40 GHz Total memory: 6GB DDR2 DIMM NVIDIA GeForc

  • syswin7u8.exe - on w700p anyone know of him?

    Malwarebytes picked up malware a few days ago, took care of some objects. Tonight, cpu was running hot and hard, push this file was it (syswin7u8.exe). Google and a page on the malware came. We found two directories that belong so deleted. One was sy

  • Reformat C: with HP Advisor...

    Hi guys,. I need help. Acted for about three months when I bought this bad boy stage monitors were not working, and Windows 7 kept gel etc. A geek came round to HP to fix - first he tried restoring the system which does not-Microsoft wound't just let

  • How can I change the settings in the appearance of a user without admin rights?

    Hello! Here's the deal: when I logged as a nonadministrator user, I can't customize some settings for this account in appearance. After that I have to change some settings, for example to disable smooth list scrolling areas, all these settings back a