Acquisition of data not found no supported devices

Similar Questions

• Protocol not found: net.rim.device.cldc.io.rtsp.Protocol

  I try to use the rtsp video streaming without the browser and the native multimedia player. Whenever I try to open a connection to the 3gp file I get this Protocol not found error:

  "Protocol not found: net.rim.device.cldc.io.rtsp.Protocol".

  I get this to Connector.open (), it is not associated player.

  I'm testing with a youtube rtsp link:

  RTSP://rtsp2.YouTube.com/CnALENy73wIaZwk9rVk-nJ9fNRMYESARFEIoeXRhcGktTWV0b3ZhLVZpc2lvbmZvcllvdVR1YmUtdGU1ZjBxcHQtMEgGUghzdGFuZGFyZHIgwfgx8V-PaxNuQa-z3yd4eWD9LlbsOl3qUImVMV6ramMM/0/0/0/video.3gp

  I tried specifying connection settings three ways:

  * « ; = wifi interface.

  * « ; deviceside = true' with the correct apn settings

  * « ; deviceside = true; ConnectionUID = WAP2 trans' (firing from the service book)

  None of them will work. I am compiling to 4.3.0 and tests on a 4.6.0.210 9000.

  I also put the issue on the 4.6.0.190 9000 and 4.7.0.75 9530 simulators.

  The same link works very well when the call via the browser.

  I tried to use a data source because I expected the rtsp Protocol to be supported by the connector on 4.3.0 +, but I guess I can try just passing in the Locator directly to the createPlayer() call if the player is the only thing that was supported by it. I'll try later and after return.

• How can I instill the microphone into my computer toshiba satellite, I have windows 7 32 bit, the microphone was not found in the device maneger?

  How can I instill the microphone into my computer toshiba satellite, I have windows 7 32 bit, the microphone was not found in the device maneger?

  Go to the Toshiba support site and search page of your PC/computer laptop.

  Download and then install the last set of specific drivers for W7.

  See you soon,.
  Jerry

• "Object not found in the device.

  Hello

  When I try to add the new controller in the WCS (ver. 4.1.91.0), I get this error:

  "Cannot add the device at a rate of WCS: object was not found in the device.

  The controller was added earlier and then deleted again. When I try to add the controller again, I get the above error. It's a WLC2106 I'm trying

  Both the WCS and the new controller works fine, and I tried to start both.

  Still not the same error when you try to add.

  Anyone know what it could be?

  TIA

  Peter

  Yes I do, or restore your controller for 4.1.185 if this version works for you...

• "Data not found" error when querying provider vDC for profile storage

  I'm trying to create a vDC with a defined storage profile. I'm getting a ' Data not found "when I run the following command:

  ReferenceType providerVdcStorageProfileRef is pvdc. GetProviderVdcStorageProfileRefs(). FirstOrDefault();

  I can query the pvDCwithout networks a problem.

  Here are more code:

  ReferenceType pvdcRef is admin. GetProviderVdcRefByName ("my provider vDC");
  createVdcParams.ProviderVdcReference = pvdcRef;
  Pvdc ProviderVdc = ProviderVdc.GetProviderVdcByReference (objConn.client, pvdcRef);

  ReferenceType providerVdcStorageProfileRef is pvdc. GetProviderVdcStorageProfileRefs(). FirstOrDefault();

  vdcStorageProfile.ProviderVdcStorageProfile = providerVdcStorageProfileRef;
  createVdcParams.VdcStorageProfile = new VdcStorageProfileParamsType [] {vdcStorageProfile};

  Can someone help me?

  I found the problem. It is this line of code:

  client = new vCloudClient (vCloudURL, com.vmware.vcloud.sdk.constants.Version.V1_5);

  When I've updated this line below, everything started working:

  client = new vCloudClient (vCloudURL, com.vmware.vcloud.sdk.constants.Version.V5_1);

  I started this solution on the 1.5 version and never put .net to update the version of the client in the code.

• Not found audio input device

  When you record a voice on the audio input device says iphone not found. In the micro-life the iMovie app does not appear. What should do?

  Thanks Pierre

  Hello Peter,.

  Thank you for using communities of Apple Support.

  I see that your internal microphone is not recognized in iMovie on your iPhone.  I want to start that you please leave the app iMovie and then restart your iPhone.

  iOS: force an app to close

  Turn your device iOS market (reboot), then reset

  Take care.

• not found Bluetooth peripheral device for compaq cq 42

  Hello

  I bought a new computer compaq cq42-173tu laptop and I installed windows 7 ultimate. I have some problem in using bluetooh. every time I try to connect it says "BLUETOOTH PERIPHERAL DEVICE DRIVER not FOUND" by provinding pls help me with the driver appropriate for my laptop? Thank you

  PRESARIO CQ42-173TU, processor intel core i3 - 330 m 2.13 Ghz, windows 7 ultimate (32 bit) operating system

  Ok. BUT CHECK OUT WHAT THE PROBLEM IS WHEN YOU FEEL TIME. Ok? I'LL WAIT FOR YOUR MESSAGE.

  AND THANK YOU VERY MUCH FOR YOUR SUPPORT, I REALLY APPRETIATE YOUR EFFORTS & ANSWERS TO SOLVE MY PROBLEM. THHANKS ONCE MORE. YOU HAVE SOLVED MY PROBLEM IN A WEEK. IT IS GREAT. THE DRIVER YOU SAID TO DOWNLOAD REALLY HELPED A LOT. OTHERWISW I WAS NOT GETTING THE CORRECT DRIVER FOR MY LAPTOP.

  SO I'M MARKING YOUR ANSWER as a SOLUTION BUT PLS POST COMMENTS WHENEVER YOU GET to KNOW THE (BLUETOOTH DEVICE - NOT FOUND DEVICE) PROBLEM WITH the NOKIA PHONES. FINE?.

  AND CAN I ASK YOU ANOTHER HELP? ACTUALLY I NEED A DRIVER OR SOFTWARE TO RUN MY WEBCAM.

  MY LAPTOP IS AN HP WEBCAM-101 PRE-INSTALLED. MY LAPTOP SPECS ARE THE FOLLOWING:

  MODEL - COMPAQ PRESARIO CQ42-173TU

  AND I INSTALLED WINDOWS 7 ULTIMATE 32 BIT.

  INTEL CORE I3 - 330 M 2.13 GHz

• Operating system not found, no boot device has been detected but can run XP in Bootcamp without problem?

  The title says it all. I searched and tried the partial fixes to some of the questions.

  I have installed Bootcamp and a working copy of XP Pro works no problem at all.

  I installed VMFusion and merger goes to the partition, and I get the error no bootable devices and not found any BONES. It seems trying to boot from a network, it works to resolve a MAC address. Then he hangs on. Then don't say: "no found bone." I put the disc XP Prop and try reinstalling and it said: none found disk... I have attached a few photos.

  Thank you

  Note: These senses are different which have already been posted so read and follow through... Note: These steps assume that you have a single Apple to default installation of Windows on a single Boot Camp partition and Boot Camp of VMware Fusion single default partition Machine virtual (without a snapshot *) and if you have changed the partition Boot Camp Virtual Machine to add additional hard disks to be virtual or RAW disk then do not use these instructions unless you backup the Boot Camp partition the Machine package virtual first. * Also note that Fusion 2.0.0 may accidentally have a snapshot with the virtual partition Boot Camp Machine and it should not have, then you should check to ensure that the condition does not exist as well. (With merger closed if the partition Boot Camp Virtual Machine package is over 1 MB in size, then you might have a snapshot in place and do not continue with these instructions.)

  ===

  1. If the merger is open, close it.

  2. in a Terminal (/ Applications/Utilities/Terminal) copy and paste command, as the following and then press Enter and it will delete the partition Boot Camp Virtual Machine of the metadata and the Virtual Machine to help.

  Note: This does not affect the Boot Camp partition install windows in that it does not remove it.  Also be sure you copy all the command line below, as well as, "RM" at the beginning of the ' (quote) after the s in the Machines. "

  RM - dfr "/Users/$ the specified item was not found./Library/Application Support/VMware Fusion/Virtual Machines/Helper/naos-1.0.vmwarevm/vmware.log ' ~/Desktop/Helper_vmware.log

• Not found base system device driver

  Recently, at startup, I get an error message 'Base system device driver' not found. Windows cannot find the driver appropriate to solve the problem. I use a laptop Presario F756NR with Windows Vista (32-bit) OS.

  I checked the 'properties' of device and find the bus 2 PCI, device 5, function 2.

  Under status: this device is not configured correctly. (Code 1)

  There is no driver selected for the item or a set of device information.

  To reinstall the drivers for this device, click on reinstall.

  Click on reinstall just made sure another Windows search found nothing.

  I tried to download sp38689.exe with NO result.

  Help please!

  Hi, Bob:

  It's all part of this card reader controller stuff.

  I suggest that you do a right click on any card reader devices and select uninstall.

  If there is a check box to uninstall the driver, these boxes too.

  Restart the PC and if the drivers do not correctly install, download and reinstall the card reader driver.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-58981-1&CC=US&DLC=en&LC=en&os=2093&Product=3646836&sw_lang=

  Paul

• Save as PDF task not found on your device

  I was scanning documents to my imac to "Save as PDF".  Without any change, this afternoon, I get an error message. The task of 'Save as PDF' found on your device is not available on your system.  Please select another task.  I get the same type of response when you try to save it in JPEG format.

  Hello UclaBobcat and avincelli

  What changed recently since the last, it worked? Updates to Mac etc? Maybe something to change the way the software works.

  Have you tried to reinstall the software. If this isn't the case, I suggest you try to reinstall the printer software.

• anti virus not up to date/not found possible spyware

  anti virus not found spyware as possible

  A. pay your antivirus subscription.
  B. http://support.microsoft.com/kb/555375

• Error when you try to start iTunes: application not found Apple support

  How can I download apple for windows vista support

  I am trying to download itunes & when I try & open it he says, apple support application is not found, then how do I get itunes to start working again?

  Hello safy97,

  Do a search for your message of error, grown from a Forum of Discussion Apple with your same error message. See the post below. Several users used the Cr4z33 solutioin and have managed to have installed iTunes and work.

  http://discussions.Apple.com/thread.jspa?threadID=2151777

  If this does not help, I suggest you post in the Apple discussion forums. I have included a link below.
  http://discussions.Apple.com/forum.jspa?forumid=792&start=0

  Sincerely,

  Marilyn

• built-in webcam not found in the Device Manager, Samsung r710 laptop, windows 7

  I have a laptop Samsung R710, who settled with Windows 7. The laptop came with a built-in webcam. I was not able to get a piece of software to recognize the camera. I did a system restore. Updated the drivers. Visited the Samsung website for updates. When I opened the Device Manager to see the drivers for the webcam, webcam not found in Device Manager.

  Any help to fix this would be greatly appreciated.

  Thank you, I must admit to thinking in the same direction you... buy a separate camera or wait until he is more under warranty and have a quick look at the wiring around the hinge.

• Edge counting and Source of Timing for timed loop on the request for Acquisition of data - not acquiring data on specified rising edge

  Operating system: Windows XP

  Hardware: PCI 6259

  Terminals used: PFI0 and PFI2

  Counters used: Ctr0 and Ctr1

  IM developing an application for the acquisition of data where timed loop synchronization source comes from my PFI2 (using the string A of an encoder).  IM basically trying to acquire data based on the number of ticks from my encoder.  For the synchronization source, I use counter 1 to capture the rising edge and have the loop time-acquisition of data.  At the same time, Im using the counter 0 to count the number of rising edges so I know exactly in what tick data was acquired.  PFI0 and PFI2 are connect to channel A of the encoder.

  Questions:

  Timed loop acquires data at each tick, because when I discover the data (text) file is missing count of my encoder value.  Is it because there is a limitation on the Windows operating system?  I used a noculars to measure the frequency at the maximum rotation of the channel encoder and 6,757 kHz.  All solutions?

  Also, is there anyway I can route the source channel internally an encoder to generate synchronization source instead of using another counter?  I have attached my VI.

  Hello

  All the samples that you acquire will be read by LabVIEW in a sequential manner. Figure 4-21 on the M-series on page 80 (4-34) shows that you will acquire all the samples you request all channels that you enjoy in sequentially.

• "Not found/no support" so-called browser on FF 9.01. What should be the configuration under 'useragent' entries filter? Think mine are screwed!

  I had some problems with some sites saying that my browser has been "not supported" or "not recognized" or "must be upgraded. Al; so I was getting strange behavior when I used my iGoogle homepage or the search functions of Google.
  

  I UPGRADED to 9.01 FF, but the problem continued and I noticed that some add-ons have been listed as incompatible when they should have been

  I found an old article on the entries 'useragent' in config of FF. What I have / had did not match the article. I tried the RESET on them, but I'm NOT sure if I did it right!

  That my entries be with FF 9.01 in the config "useragent" filoter and how to correct any errors?

  This pref should not be there at all on the subject: config page. If you reset the pref general.useragent.override then it will get a value of empty string and withdrew the comments: config on the next start page. Then your user agent will be the default value.

  See also the help > troubleshooting information page.

  • https://support.Mozilla.org/KB/using+the+troubleshooting+information+page