Acrobat.exe - Application error 0xc0000022

Similar Questions

• "Explorer.exe application error"(0xc0000022). "

  I use Windows vista and because of the failure of my computer was improperly arrested and when I tried to it turned on I got this error message explore .exe-application. (0xc0000022), the application doesn't have to initialize correctly. Click ok to close the application, 1) window a work stoppage.  2.) window checks to the solution to the problem. (3.) a problem caused blocking the program works correctly. The window close the program and notify you if a solution is available.4.) Report of the programme and the solution: a) the window update... (these are the messages that I always get every time I tried to log on or every time I re start the computer.) I tried to click on the window updates, but it does not open as well.

  My computer is not back to normal so far. the screen stays black and I see not all destop icons too

  Hello

  The best way would be here to check in SafeMode if the same error is displayed.

  Step 1:

  To enter safe mode, please see:

   

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you managed to get into safe mode, follow the instructions in the article below to scan System File Checker. This analysis for any damaged system file integrity violation and repairs if there is.

   

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

• IEHelper Acrobat: iexplore.exe - Application error

  Whenever I get close internet explore I get the message "Acrobat IEHelper: iexplore.exe - Application error the instruction at"0x01801ea8"referenced memory at"0x01801ea8".»

  The memory could not be 'read' "what should I do?

  Which version of Acrobat reader you have installed?
  Try to remove this application, clean the registry (with CCleaner), download and install the latest version of Acrobat reader!

  All that s

• Acrobat Professional DC gettingRDRCEF.exe Application error (0xc0000005)

  Hi Adobe supports,

  I'm Adobe Acrobat Professional DC get error message every time I open a file, or during the recording of files. The error message was AcroCEF.exe Application error. The application was unable to start correctly (0xc0000005). Click OK to close the application.

  I tried uninstalled and reinstalled the app, but seems to be not resolved and there is no solution on the Forum from Adobe. Is it in any way I can solved this problem permanently?

  Thank you

  Hello

  Go to the Edit menu, preferences, select the General category on the left and uncheck 'Display storage online at the opening of the files' and 'storage online when you save files. Press OK and restart Acrobat.

  Concerning

  Sukrit diallo

• CS6 Master Collection CS6ServiceManager.exe - Application error: the application is not

  After you have installed the trial CS6 MC version I get CS6ServiceManager.exe - Application error: the application failed to start properly (0xc0000022). Click OK to close the application. This error message appears after opening any program in CS6

  Thank you for your interest,

  He had trouble downloading and not all programs have been installed correctly. It took three downloads and uninstalls cs6 to do things. The error message was popping up constantly and Premiere Pro would crash. I've narrowed the problem to Adobe Air. I uninstalled and reinstalled and the problem was solved. Moreover, the operating system is Windows 7 (64)

  Thank you

  Johnnyblas

• AccelerometerSt.exe - Application error

  AccelerometerSt.exe - Application error

  "The application was unable to start correctly (0xc000007b). Click OK to close the application. »

  It happened after trying to install the windows 8.1 update and my computer went to a black screen. It is in this State for a while and I had to go so I stopped it. The next time that I turned it on, the update had already completed and I had windows 8.1. Everything works well except for the error message that appears whenever I turn on my laptop. I have no idea of what he does, but when he arrives, it annoys the hell out of me. If anyone can help I would really appreciate it.

  In the menu is uninstall programs, 3D driveguard program it listed?

  If so you can try to uninstall it, restart, and then reinstall the program.

  The problem is definitely with this driver because what is the accelerometer is to have the program 3D driveguard Park the heads of the hard drive in case of bumping or dropping the laptop low rise.

  Unfortunately, I only got the drivegard 3D or ProtectSmart driver install and work, so I don't know what you need to do to clear this error, since reinstalling the driver did not work.

• Re: AccelerometerSt.exe - Application error

  Hello

  I just bought the envy 15 and used for only one day, the next day I get this error:

  Re: AccelerometerSt.exe - Application error

  Your quick help is very much appreciated.

  Thank you

  Hello

  Try the following.

  Open windows control panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of HP 3D DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Kind regards

  DP - K

• HP Envy 7 ": HP laptop"logonui.exe application error"+ auto repair restarts without end

  I really don't know exactly what is the name of my product, however, my problem is very specific:

  First I got an error message titled something in the sense of "logonui.exe application error" with a background black, I couldn't start my laptop up so I went to recovery and just all backed up successfully and went to reformat but it got stuck at 2% until he finally said the Recovery Manager has stopped working , I tried just about everything until finally my laptop just say 'auto repair start' goes to a blue screen, restarts and repeats again and again. I can't really do anything, it seems pretty well doomed. It seems like a virus, but really, I don't know what I can do, if the only solution is to send in for repair, can I try now?

  Kind regards

  Josh

  I get the "HP Recovery Manager failed. Error code = 0xEFFFFF08"pop up whenever I try to get back and I'm not using any USB devices.

  I ran a scan of the hard disk on UEFI and my results have been:

  Smart Check: spent

  DST short: failure

  Failure ID: QCQ7PH-7RK701-XD7WMF-60VL03

  Product ID: N1L03EA #ABV

  Hey!

  "The 'LogonUI' in Windows application manages your startup and shutdown graphical user interface (GUI) that displays the Windows on your screen logo and the status of your judgment." It also displays the login screen that you see when you start the PC. Corruption in this application could lead to problems start and stop, such as gel. »

  I found this paragraph from a titled link: LogonUI.Exe Application error after update 8.1 of Windows that can help you! There are a few in there troubleshooting steps that may help.

  Here is a Microsoft document for you to read as well. This is called: error: LogonUI.exe application error.

  I understand what you are saying about this marking as resolved. Tell you what, read the links I provided on the error in the application (which, from what I've read, in my opinion, does not sound like a virus), replace the hard drive and then if the issues are resolved for you, come back and mark this question as an acceptable Solution for others.

  I wish you the best!

• Pavilion x 360: AccelerometerSt.exe - Application error

  From the start, I get the following error.

  AccelerometerST.exe - Application error - the application failed to start correctly (0xc000007b).  Click OK to close the application.

  My system shows now that he needs for the update but it will not complete the process.  No matter if I select shut down or restart.

  It started a few weeks ago.  What should I do about it?

  Hello

  Try the following.

  Open Windows Control Panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall - don't worry if you get an error at this point, just continue.

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of HP 3D DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Kind regards

  DP - K

• Restore7.exe application error

  So, when I try to boot my windows, an error box will appear, who says:

  "Restore7.exe - Application error. The instruction at 0 x 77892591 referenced memory at 0 x 00008084. The memory could not be read. »

  When you click OK, the computer starts and get stuck on this same page. I can't go to HP recovery by pressing F11. Recovery CD no longer works. Operating system is Windows Vista Home Premium

  can someone help me please. This problem can be solved by buying new hard drive?

  There is the info from my computer. :

  http://support.HP.com/us-en/document/c01409678

  How are recovery disks does not work? If you insert the first disc into the optical drive, press any key shortly after turing on your computer, you should start the recovery menu so that you can fully recover your computer.

  In addition, this could have something to do with Windows Product Activation? If you have added the internal devices, remove them and make sure you unplug all USB devices. Just the mouse, keyboard and display connected when you attmpt to a recovery.

• Computer OFFICE-R4RAE96: AccelerometerSt.exe - Application error

  These days, when I open my laptop, it's show as "the application could not start correctly (0xc000007b). Click ok to close the application. Also the top of the box of dialoge showing AccelerometerSt.exe - Application error

  Hello

  You upgrade your Windows 10 machine? A few other members, including me had the same problem a few weeks back and in my case, I simply reinstalled 3D Driveguard software.

  During installation, it actually says software on my machine is more recent BUT the problem disappeared. Download and run the following software:

  FTP://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71708.exe

  I hope this helps.

• Pavilion 15-ab522tx: AccelerometerSt.exe - Application error

  AccelerometerSt.exe - Application error

  "The application was unable to start correctly (0xc000007b). Click OK to close the application. »

  was shown when I rebooted my computer after installing some updates

  AFTE that I also had an error

  "System AccelerometerSt.exe error: mfc120u.dll is missing.

  Use system restore to restore Windows before the updates took place.

  Choose the point of system that corresponds to the schedule.

  See the thread next where a member has a similar problem. There is a link to the Hp 3D driveguard softpaq, which will provide the missing accelerometer DLL file you need.

  http://h30434.www3.HP.com/T5/desktop-operating-systems-and-recovery/on-start-up-i-get-this-in-a-box-accelerometer-St-exe-System/m-p/4161428#M91513

• HP 850 G2: AccelerometerSt.exe - Application error

  I have a 850 hp

  After installing quicken 2016 (I previously got quicken 2013) I now get the following error.

  AccelerometerSt.exe - Application error

  "The application was unable to start correctly (0xc000007b). Click OK to close the application. »

  can you guide me to fix this problem?

  Hello

  Try the following.

  Open windows control panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall - don't worry if you see an error at this point, just continue.

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of HP 3D DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Kind regards

  DP - K

• HP Pavilion 15-n226tu: AccelerometerSt.exe - Application error

  AccelerometerSt.exe - Application error

  "The program can't start because mfc120u.dll is missing on your computer."

  Hello

  I did an upgrade to Windows Windows 10 8.1 that my computer was not shut down properly.  Now, whenever I start my laptop I get this error message.

  I have a HP Pavilion n226tu 15 Notebook PC model laptop and you ask to help me solve this problem.

  Best regards

  Gaurav Nath

  Hello:

  See if reinstall the software of HP 3D driveguard solves this problem.

  This package provides the HP 3D DriveGuard software (HP ProtectSmart Hard Drive Protection) for the laptop models running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

  File name: sp71811.exe

• On startup, I get the following error: spoolsv.exe - Application error

  On startup, I get the following error:
  Spoolsv.exe - Application error
  The instruction at "0 x 10002837" referenced memory at "0x00000000".  The memory could not be "written".

  Then the print subsystem stops.  Windows update service keeps control and verification.  I let go 20 hours and it is never resolved.  I can't open some applications requiring printers.  Help please.

  Bill

  Hello DragonBill,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Regarding your question, the most common cause of the error is an abundance of. SHD and. Files in the directory of spool SPL.  These files are created by the spooler to save data delayed a print job.  The. SPL file contains the drawing commands and the. SHD file contains information of working parameters the print job.

  To try to correct the application spoolsv.exe error, you must remove these files from the system.  To do this, perform the following steps on your Windows Vista computer:

  1. open the Control Panel, select Classic view, select Administrative Tools and then select Services .

  2. in the Services management console, find the Spooler service, right-click on it and select stop.

  3. then open the folder C:\Windows\System32\Spool\Printers .  (Here, we assume that your Windows is installed in the default C:\Windows folder)

  4. delete all the . SHD and SPL files in this folder.

  5. then open the TMP folder and delete all the old, unused files in this folder.

  6. Finally, restart the spooler from the Services management console service.

  Important note: If you are unable to delete the files in Normal Mode, then you may have to restart your computer in Mode safe to delete files.  To start your PC in safe mode, press F8 when the system restarts, and then select the Mode option safe mode from the Windows Advanced Options Menu.

  If deleting the files do not straighten out the problem, you must perform a system restore and restore your system to the times before when the error started appearing on your computer.  A.m. run the restoration of the system, open Start, all programs, Accessories, System Tools , and then select the System restore option.  On the Welcome to system restore screen, select the restore my computer to a time option earlier and select Next.  In the Select Restore Point screen, select the date that represents the restore point to which you want to restore your computer back, and then select Next.  Finally, check and then click Next again to confirm your restore point and restore of the system.  Restart your computer when you are prompted, and then press OK to close the end of System Restore screen.

  It is important that you know that application errors can also occur because of virus or spyware infections.  In fact, the Spoolsv.exe process is also a known backdoor vulnerability which can be planted on your computer for malicious purposes by an attacker.  Therefore, if you see an unknown process running on your system, you must take appropriate measures to remove them.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.