Acrobat in Word error message when you move around the Ribbon

Similar Questions

• Windows 7 - "Try Again" error message when you move files, creating folder, etc.

  When I try to move files, create a new folder or move a file, save a file with a new file, etc, I get an error message indicating "Item not found", with a description of "Cannot find this item", "this is no longer in C:\...» "," Check the location of the item and try again.

  

  So far, I have tried the following:

  ·         I have run CHKDSK on the drive. [chkdsk c: r], "CHKDSK" came back without error - the disk is a disk SSD

  ·         I also ran "sfc/scannow", she also returned without error.

  ·         I uninstalled all updates that occurred during the time that this came - tested, the computer and reinstalled them.

  ·         Updates of Windows computer are all up to date.

  I have in case I have to move several files, press the button 'Try Again' to each folder that I move.  This becomes a big problem.

  Any help to fix this would be greatly appreciated.

  Dell Precision M 4800: Processor; Intel Core i7-4810MQ CPU @ 2.80 GHz, 2801 Mhz, 4 Lossnay 8 logical processors. Windows 7 Enterprise (64-bit) SP1 | 16 GB memory | SK hynix SH920 2.5 "512GB SSD hard drive

  I've posted this before, but after a few replies, the thread has been cut and has all the additional answers.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/Windows-7-error-message-when-moving-files-creating/4b9e607c-7163-4c04-8a78-29e65cc4bf9c

  Hello Greg,.

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  You did any hardware or software changes to your computer before the show.

  Thank you for details on the question and your efforts to resolve.

  This problem may occur because of the corrupted Windows files or incorrect registry settings.

  To diagnose the problem, check if the problem occurs in safe mode.
  Refer to this article:
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Please refer to the suggestions of Mr Andersen replied on September 4, 2010 and check the problem with folders.
  https://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/renaming-folders-causes-item-not-found-error-in/e2cf38c7-9e77-4256-89DE-6308df53d5f9

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Error messages when you move files PSE13 and PSE14

  I am reorganizing my records of PSE 14.1 (and a few hours before using the PES 13) on Windows 10. This means that I'm moving them from one disk to another using the view of folders on the left panel of the PES.

  Everything goes very well with the first shift after the launch of PSE. No error message and the files in the folder find you in the right place with the folder.

  But for much of the subsequent move there is several error message boxes that must be pressed one by one to move forward. Much more than the number of files involved. However, ultimately files and folders get into their expected places. But with dozens and dozens of needless (?) Click on the OK button.

  Error messages that I see are

  • "A folder with the same name already exist in the requested location" - which is patently false, as I'm only moving called records and verifying that I won't have existing folders with the same name instead of the target. The record was 16 photos inside and the message popped up 55 times.
  • "The operation could not be performed. "The error occurred because of invalid characters, read only location or existing folder with the same name"-this comes very often after the message stated above, but not always. And in multiples as well.

  And every now and then the move operation is going well through.

  I tried to understand if there is a model - but nothing so far... I use no "special characters" in the filenames etc...

  Is there another way to move the folders? Is there a solution to this behavior?

  juhar76990688 wrote:

  Looks like I have at least found a way easier and more predictable and easier to reorganize my files: travel using Windows file / folder management tools-, then to reconnect files from PSE. In this way, I know how many dialog boxes, I need to treat every step - and it is much less than the way PES...

  Yes, it was what I was going to suggest it.

  I did not PSE14 because I'm away from home now. I've already met these messages before, and I think you are right that the first time you move a folder to a new empty destination tree, you do not have problems. I would not be surprised if there was a real bug in the display of folders when you move files repeatedly, but I was not able to reproduce the problem. A possible source of problems would be the way the folder hierarchy is updated in elements; I guess that to keep this folder updated tree, there is a procedure of "cache" to speed up the process (folders display in the tree should work with an image of the Explorer, supplemented by information in the catalog itself). Older versions were very buggy in folders view, but I'm not sure that the current version (since PSE11) is absolutely foolproof.

  Move the folders step by step from the Explorer and reconnect immediately seem to be the best in your case.

• Receive error message when you open Outlook; the path specified for the file G:\outlook...pst is not valid.

  I recently exported my outlook to a pst file and saved on my external hard drive.  Since then I get this message when I open Outlook "the path specified for the file G:\outlook...pst is not valid.  How to stop?

  NEVER use the. Functions of export/import PST in Outlook.  They are broken, have been for some time, data loss and often corrupt Outlook profile in use. To perform a backup, just close Outlook and make a COPY of the. PST file.  Looks like (and I guess here) your external HD is G:\. This being the case, that. PST file is probably still attached to Outlook and Outlook can't find it.  With Outlook open, see the supplement files pane. PST file, right-click, and then click "close".  You may need to have the hard drive external and exported. File PST attached and available for work.  If this does not work, you have damaged your profile and will need to make a new one:

  How to create and configure an e-mail profile in Outlook 2007 and in Outlook 2003

  HAL
  --
  HAL Hostetler, TCE
  Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
  www.kvoa.com - KVOA television, Tucson, AZ.
  Live Hot Licks - www.badnewsbluesband.com

• Tedious Error Message When you install Itunes "the installer has insufficient privileges to access this directory: C:\Program Files\Quick Time\QTSystem.»

  Hi, I tried to update my iTunes a day and when he made an error appeared. Now, today I uninstalled both iTunes & Quicktime, I don't remember what the first said (before finding out the programs were installed yet) but after I went back uninstalled them I tried to reinstall again (in the hope that it would work) and this message popped up.

  The installer has insufficient privileges to access this directory: C:\Program Files\Quick Time\QTSystem. The installation cannot continue. Log in as administrator or contact your system administrator.

  * I'm already logged as administrator.

  Could you please help me understand what the problem is? Thank you!

  Hello

  Try right click on setup.exe itunes then run as adminintrator

  If this does not work, try this

  Follow the information from apple to the link below

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  http://support.Apple.com/kb/HT1923

  and or ask for their support of itunes

  http://www.Apple.com/support/iTunes/

  Also try the discussions of apple itunes

  http://discussions.Apple.com/category.jspa?categoryID=149

• How can I fix mf_status.exe error messages when you click on the button stop?

  • The exact error message:

  The instruction at 0x00000000 referenced memory at 0x00000000. The memory could not be read.

  Click on OK to terminate the program.

  • Operating system Version &:

  Windows 7 Home Premium

  Service Pack 1

  System manufacturer: TOSHIBA

  Model: Notebook

  Note: 4.1 Windows Experience Index

  Processor: AMD Athlon (TM) II Dual-Core Processor 2.10 GHz

  Installed memory (RAM): 4.00 GB (usable 3.74)

  System type: 64-bit Operating System

  Pen and touch: no pen or press enter is available for this view

  • Version of the browser &

  Internet Explore 10

  Version: 10.0.9200.16540

  • No software or hardware that I recently installed or deleted

            MediaFire Express BETA for Windows

  Version: 0.15.4.4888

  • Any recent changes I made to the system

  I accidentally click the disk wiper in CCleaner. Does this affect my system?

  • The things that you have already tried to solve the problem

  http://www.pcmaxutilities.com/wikidllfiles/mfstatus-exe-error-fix-Guide.html

  I also downloaded: MFStatus.exe files repair tool

  Any help will be much appreciated. Thank you! :-)

  Hey Ken, COLIENNE,.
  Let me to interfere here because I met the same problem, and I followed method 1 suggested by jojo.
  And the problem comes from MediaFire Express, even if it is not in beta for me.
  Windows Vista SP2.
  Hope I helped a bit...
  Sincerely,
  Bertrand

• Windows 7, normal use - mouse freezes when you move around the screen

  Hi there I use Win7 since the RC1 of scene and found it rock solid, I'm now running Windows 7 Enterprise. I installed it on a Dell XPS 1710 and had few problems so far. When I start my computer and you move the mouse around the screen, the mouse "hangs" for a second or two, then moves, then crashes again. In even the startup sound I is unstable, as are MP3 when I play those. All these things worked * perfectly * until a lock suddenly toward the top of the computer having been on during a few hours, which was a new event. The computer haddnt overheating but since then this nervousness thing that happened.

  What I tried:

  Selective startup, without the elements of startup and services, without change.
  Search for new drivers for my card (Nvidia 7950GTX) gfx, no change.
  Shut down the computer to turn off this device to save power 'allow' in the option of USB hub root

  None of that helped him. The CPU spikes 16% at most when you the mosue blocking, I have a lot of RAM available. Occurs when I use the touchpad as well and even when I'm not running all programs - oh, I have a Microsoft Intelli Mouse 5 button.

  Hopfully somebody can provide some more ideas for me. Thanks in advance

  Hello

  Please scan your computer of viruses, you can also perform a full scan online.

  Here is the link:

  http://OneCare.live.com/site/en-za/default.htm?mkt=en-za

  Try to clean boot your machine, here is the link:
  http://support.Microsoft.com/kb/929135

  Kind regards
  Jackson.

• things snapping in place when you move around the page

  Hi all

  When I arrived at muse from adobe and I was moving things there would be lines showing that it was the Center or align it with other things on the page, and now he does not quite t more, someone knows how to fix this?

  Hi Joshua,.

  I think that you are referring to smart guides, you can allow them to display option.

  

  Kind regards

  Akshay

• I get an error message when you try to download adobe reader acrobat dc [Android]

  Can anyone provide assistance? I get an error message when you try to download adobe reader acrobat dc

  Hello

  The error is not related to the Adobe Acrobat application. There is a problem with the store to play on your phone. You can try the precautions listed in the error store play 927 - 3 ways to get rid of it in Android | Difficulty of errors.

  If all goes well, that should solve your problem.

  Thank you

  Adobe Acrobat team

• I get an unknown error message when you try to copy a cassette of my video camera, but the camera connect

  I get an unknown error message when you try to copy a cassette of my video camera, but the camera connect

  If you are running Windows XP... There is a slight chance
  that by running the following command would be the fix:

  Reach... Start / run... and type or copy / paste the following text:

  regsvr32 %windir%\system32\qdv.dll

  Then... Press on... Come in...

  You should see a dialog box stating:

  DllRegisterServer in C:\WINDOWS\system32\qdv.dll successful

  Good luck...

  There is debate on this subject in the following forum:

  Windows Movie Makers Forums
  An unknown error has occurred

• I get an Error Message When you try to send emails. "some errors occurred while processing the requested tasks. Please see the list of errors below for more details". __

  I get an Error Message When you try to send emails. "some errors occurred while processing the requested tasks. Please see the list of errors below for more details".

  But it sends the message anyway... multiple copies, and she also is put in the "Outbox" in Outlook Express as if it is not sent.

  To stop the email to be sent repeatedly to the recipient, I erase it from the "Outbox" but a) you don't know if they really got it) b it is embarrassing for the receiver c) is this a bug I can fix it?

  Thanks for any help.

  You have a corruption of dbx file easily corrected.

  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

  Compact often as specified above.

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• 0001 0002 error message when you install printer drivers

  I get the 0001 0002 error message when you try to install the drivers for a Canon Pixma MX892 printer. Five different Canon representatives tried to find a solution - nothing works. (It seems to be a Windows error message rather than generated by the installer of Canon).

  The error message appears when a) using the disc of Canon or the drivers of its Web site; (b) after a reboot selective; (c) when the Norton firewall is disabled; and d) each combination of a) through c). It also occurs when

  The exact time wherever it occurs during the driver installation process is when Setup "enrolled in the program of information."

  Is the exact wording of the message: an error has occurred while files were copied: 0001 0002.

  I am running Vista 32 bit and download the drivers using Firefox 18.0.2.

  After you have installed many printers without a hitch, it drives me crazy.

  Like you, I thought it was an Epson printer software installation problem and went bought a Canon.  Still I can not install two printers software.  The Epson and Canon customer service can not helped at all.  That's when I decided to contact Microsoft.

  Yes, I paid for the premium service, and I am pleased that they have set all my PC problems.  Takes about 2 to 3 hours to complete the work. I firmly believe that it is worth the money, in my case.

  In any case you can try this free fix by running Microsoft FixIt from this link or copy the address into your browser-

  https://support.Microsoft.com/en-us/mats/windows_file_and_folder_diag/en-SG

  I had also used this FixIt several times since to 'fix' everything OS files were inadvertently corrupt or have "disappeared".  Good luck.

• "Cannot start Microsoft Office Outlook" error message when you try to click on a name or contact us on a Web site to send a msg email on Outlook/microsoft office 2003

  "Cannot start Microsoft Office Outlook" error message when you try to click on a name or contact us on a website to send an email on Outlook/microsoft office 2003 Vista OS msg. My laptop came with Microsoft Office 2007 TRIAL version, but I already had Microsoft Office Pro 2003, so loaded on when I got it almost a year ago. My trial expired months ago... but never uninstalled cause 2003 worked. Then I wanted to do something in WORD and kept pulling up the 2007 trial and was confusing, so I sent the 2007 trial stuff to recycle bin, but not yet the uninstall. Since then all of a sudden I started to get this error msg. I can open OUTLOOK very well... BUT I don't even use OUTLOOK at all. I send from comcast.
  1. How can I get rid of this error?
  2. does anyone know how I can get my comcast open up when I go to a website to webmaster option instead of defaulting to outlook? And I already checked, "set as my default" is NOT enabled in outlook.
  Help, please!

  Hello

  Please check with the experts of the Office and Outlook here: (re - ask your question in these groups)

  Discussions of Questions General Outlook
  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Outlook.General&lang=en&CR=us

  MS Office discussion groups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx
  And here:

  Microsoft.public.Outlook discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Outlook&cat=en_us_81f401b3-b3fe-4e8d-B291-066f30b63ec8&lang=en&CR=us

  Office newsgroups
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.Setup&cat=en_us_642d5640-c1ba-43C3-A224-b3ec1473346c&lang=en&CR=us

  I hope this helps. Rob - bicycle - Mark Twain said it is good.

• I have an Airport Express, which gives an unexpected error message when you try to connect to an existing network of WEP.  Any ideas.  Tried the factory returned. He was knocked offline when someone dug into the telco cables.

  I have an Airport Express, which gives an unexpected error message when you try to connect to a router WEP (Verizon) existing iOS9.3.2

  It flashes orange, but can not be reconnected to the router or to the title of the Setup Assistant or Airport utility.  Is there a way to reconnect to WIFI or should I bite the bullet and connect via Cat5e and be done with it.  My VPN works much better without AirPort Express connected.

  Sorry, but there is no WEP settings AirPort Utility on the iPhone or iPad, or any Mac version of AirPort Utility which was used for the last 4 years or so.

  If you have an older Mac still running AirPort 5.x utility or a PC with the AirPort for Windows utility installed on the device, the WEP settings that could be used to get the Express to connect to a WEP network there.

  As you know, WEP has not been secured for a number of years, and there are any number of free utilities available on the Internet, which is crack a WEP network in a few seconds. Thus, all those who want to be on your network will not have problems to do very quickly.

  But it's your call.

• Just recently, I receive the following error message when you try to access the web sites. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" then I have to click ok. There is a problem with some plugin?

  Just recently, I receive the following error message when you try to access the web sites. I use Firefox browser version 10.0.2. I get a pop-up window indicating "Exc in ev handl: TypeError: c.location is null" as the web site page is displayed in the browser winder. So, I have to click ok. Any link/website I go to what happens. There is a problem with some plugin?

  It is only a problem for the SiteAdvisor users who are still on 3.4. This problem is resolved in the latest version of SiteAdvisor, which is 3.4.1.195. Go to http://siteadvisor.com and click on download. This will fix the problem.

  Meanwhile, SiteAdvisor team will push down a JS update in the coming days 1-2 to automatically resolve this problem in version 3.4.