ACS 4.1 compatible with WLC 6.0.196.0

Similar Questions

• ACS 5.1 integration with WLC

  Hello

  can someone help me find a document for ACS 5.1 appliance, integration GANYMEDE + (configuration) with my WLC. configuration of RADIUS also for clients.

  all configuration of wireless controller shows only acs 4.x integration.

  Thanks in advance

  Hello

  There is unfortunately no official configuration example for this right now.
  Haowever, you can view these screenshots I took an example of laboratory, to set up the profile of shell and pass it back due to the authorization rule.

  Hope this helps,

  Fede

  --
  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• ISE 1.4 compatible with WLC 5508 version 7.6.130.0 and 8.0.115.0

  Hi Expert,

  We check in on Cisco ISE 1.4 online document below we found this case WLC 5508 version 7.6.130 support
  http://www.Cisco.com/c/en/us/TD/docs/security/ISE/1-4/compatibility/ISE _...

  But as control with Cisco WLC5508 version 7.6.130.0 version found takes in charge only ISE 1.2
  http://www.Cisco.com/c/en/us/TD/docs/wireless/controller/release/notes/c...

  And for WLC 8.0.115.0 show support ISE1.3
  http://www.Cisco.com/c/en/us/TD/docs/wireless/controller/release/notes/c...

  But on the compatibility matrix Wireless show that the version ISE1.3
  http://www.Cisco.com/c/en/us/TD/docs/wireless/compatibility/matrix/Compa...

  We want to know what the WLC version 7.6.130.0 and 8.0.115.0 can support ISE 1.4 or not?

  See you soon,.

  FN

  Yes, they both work with ISE 1.2, 1.3 and 1.4, it's probably just the case of this version specific WLC has been tested with the ISE version that was going out at the time.

• ACS RADIUS timeout with WLC 7.0 5.0

  Hi guys,.

  I'm setting up a device Cisco Secure ACS 1120 running 5.0.0.21 ACS to manage the RADIUS of a Cisco WLC 5508 device query running the 7.0.116.0 version.

  • These devices have open communication on all ports - no firewall or ACL
  • they have successful ping communication

  The following statements illustrate some but not all debugging I did to make sure that each device works properly in isolation.

  • Using the simple windows (radserv2.exe) instead of the Cisco ACS RADIUS server
    • This works and the WLC gets answer my fortune Server RADIUS
  • Using a simple windows EAP client to query the ACS using the RADIUS protocol
    • This works and the FAC processes the RADIUS request and sends a response
  • Placed a customer wireshark on the network to inspect the time-out.
    • Wireshark saves the package to the WLC for GBA using port 1812 but does not see responses to GBA package

  At the moment I have the

  1. WLC accepting wireless client association and
  2. sending the query RADIUS (EAP - TLS, PEAP and EAP-FAST) for GBA,
  3. the WLC receives no answer and generates a timeout message and separates the client.
     1. Note this is not a rejection or a similar message, the simple ACS does not even the package. i.e. There is absolutely nothing in the logs of ACS to suggest that he had even received a package of radius of the WLC.

  In summary the WLC and GBA properly operate independently, but they do not communicate via radius.

  Any help appreciated thanks

  It seems that you use ACS 5.0 without tasks.

  For your information, the version of the product is now up to 5.2 and 5.3 ACS should soon be released

  I recall there was a problem with ACS 5.0 with WLC operations that has been resolved in patch for 5.0

  I'm not sure of the specific CDETS but can be:

  CSCsy17858 Any manipulation of Tunnel-Type & Tunnel-Client-Endpoint uploading incorrect

  ACS 5.0 has a rollup with all the patches being accumulated approach

  My recommendation would be to download the patch 8 for ACS 5.0: 5.0.0.21.8

  Patch can be downloaded from CEC

  To install a patch set a repository on ACS (cumulative patches are larger than 32 MB, you can not use TFTP to it), copy the patch file in the repository, click ACS CLI:

  # acs patch installs repository

• Are Cisco 1130ag APs compatible with Cisco Wireless LAN Controller virtual?

  Are Cisco 1130ag APs compatible with Cisco Wireless LAN Controller virtual?

  It's... AP compatibility depends on the code that runs on the WLC. This is a matrix that is a good reference.

  http://www.Cisco.com/en/us/docs/wireless/controller/5500/tech_notes/wire...

  Sent by Cisco Support technique iPhone App

• ACS 5.3 compatibility with functional level

  Hello everyone, I have a question about the compatibility of the ACS.

  I saw that ACS 5.3 is not compatible with 2012 AD, but is compatible with 2012 AD directory configured at the functional level in 2008?

  Has anyone tried it? Authentication is ok?

  Thanks for your help

  Hello

  I would like to inform that 5.3 ACS supports up to 2008 R2.

  http://www.Cisco.com/c/en/us/TD/docs/net_mgmt/cisco_secure_access_contro...

  If you have a forest functional level 2008 value and the functional level of the domain defined on 2012.

  I saw that ACS 5.3 does not work correctly when you try to attach to and authenticate users in the functional 2012 AD / forest.

  I recommend you to upgrade at least 5.5 ACS.

  Let me know if you have any additional questions.

  Concerning

  Gagan

• Thunderbolt 2.0 is backward compatible with thunderbolt 1.0

  I have a 2011 iMac which I believe has a thunderbolt 1.0 port. Thunderbolt 2.0 works with this port as well?

  Yes. Devices and lightning 2 connectors are retro-compatible with Thunderbolt 1. Obviously, you will have all the benefits of speed T2.

• Microsoft Office 2011 Mac is compatible with OS Sierra

  I'm still on Microsoft Office for Mac 2011 on iMac.

  Ask yourself if this version is compatible with OS Sierra?

  It is, but you may have to reinstall (MS Office don't like upgrades of a large part of the time)

• Is compatible with Mac OS 10.12 (Sierra) with Logic Pro 10.2.4 and the iMac (21.5 inch mid 2011)

  Is compatible with Mac OS 10.12 (Sierra) with Logic Pro 10.2.4 and the iMac (21.5 inch mid 2011)?  I contemplate moving to Sierra, but not if it comes into conflict with Logic Pro.  Can someone advise?

  Thank you!

  Matt

  It was reported a number of not being able to save or to new projects with the title of the Sierra.

  I would conclude some time if I were you, especially if everything is working well at the moment.

• Is compatible with quicken sierra 2007?

  Is compatible with quicken sierra 2007?

  N ° you will need to upgrade Quicken to its latest version.

• IOS 10 is compatible with iTunes 12.2.2?

  My MacBook is old, and the last Mac OS can I run 10.7, which means that the last version of iTunes that I can run is 12.2.2. This allows to work with my iPad without problem from the Air, but never worked with my iPhone IS initially provided with iOS 9.

  The iPad don't often synchronize with my MacBook as it backs up from iCloud, but I wanted to put a few audio tracks on it. I tried today and it does not work. I get an error message "iTunes could not connect to the iPad" * iPad "because an invalid response was received from the device."

  I get the same messages with my iPhone SE. My guess now is the iOS 10 did update my MacBook even more obsolete by not being able to sync with my iPad. I searched around and can't find any configuration required for iTunes for iOS 10, so I'm not 100% it is the case.

  Is there any solution for this? Or is my correct guess, that iOS 10 is not compatible with iTunes 12.2.2?

  In addition, if it is not compatible, if someone has a solution of how to get music from my MacBook on my iPad (I noticed Amazon Music allows me to download tracks and then download them on my iPad, but with a limit) then I would appreciate if you could share!

  Thank you

  I'm afraid you're right. IOS10 requires iTuses 12.5

  As workaround solutions, I'm sorry, I don't have. I'm not a mac I have sync music on.

  But maybe someone else can help you

• How to download IOS, which is said to not be compatible with this computer

  I have IOS 10.7.5 I ordered IOS Mountain Lion, when I try to download it says that it is not compatible with my computer and will not download.

  I would like to still be able to have the IOS on an external drive, how I work around this problem to download the software.

  Thank you

  How old is your Mac? Are you sure if your machine is not compatible with this OS X it can be used on your Mac?

• is - a mc at the beginning of 2008 pro compatible with sierra?

  is - a mc at the beginning of 2008 pro compatible with sierra?

  After no.

  https://www.Apple.com/MacOS/how-to-upgrade/

  "Mac Pro (mid-2010 or more recent).

• CS3 is compatible with macOS Sierra?

  CS3 is compatible with macOS Sierra?

  Photoshop CS3 works as well as it did for me with El Capitan with Sierra.  There may be some features that don't work, but none that I use.

  However, it must download and apply the installer of Java for OS X 2015-001 before PS work.

  

• How I check my Mac, applications are compatible with the Sierra?

  How can I ensure that my Mac, applications are compatible with Sierra FRONT update?

  I read that some applications may not work more on macOS Sierra abandoned because of the garbage man.  Only thing I found was to use the command terminal otool - oV Applications/PROGRAMMNAME.app/Contents/MacOS/PROGRAMMNAME | tail - 3 to verify an application but I'd have to type that in hundreds of applications - is not good.

  You can see http://roaringapps.com/apps?platform=osx.

  If you want to check your applications manually, you can run this AppleScript:

  paragraphs of the allApps value (the shell script ' find/Applications / - name \"*.app\ '-maxdepth 2 |" ") SED EI \"s/\\(.*\\)\\/\\([^\\/]*\\).app/\\2/g\" ")

  Set compatibleApps to {}

  Set incompatibleApps to {}

  Repeat with PAP in allApps

  set this to the script ' otool - oV "shell & city form of (' / Applications /" PAP ".app/Contents/MacOS/" & PAP) & "|" tail - 3"

  If this contains "OBJC_IMAGE_SUPPORTS_GC" then

  Copy at the end of incompatibleApps PAP

  on the other

  Copy at the end of compatibleApps PAP

  end if

  end repeat

  -If you want a dialog box to view the compatible/incompatible applications

  compatibleString the value «»

  incompatibleString the value «»

  Repeat with theItem in compatibleApps

  "the value compatibleString compatibleString & item &"

  "

  end repeat

  Repeat with theItem in incompatibleApps

  "the value incompatibleString incompatibleString & item &"

  "

  end repeat

  Tell me to display the dialog box "compatible apps:

  "& compatibleString

  Tell me to display the dialog box "incompatible apps:

  "& incompatibleString