ACS 4.1 lack of the shell configuration option in group settings
Under group options, Miss me the section Shell (exec).
I am logged on as administrator
This is a new server
Go to network configuration
Create an AAA client with the RADIUS authentication method.
This will allow you to menu GANYMEDE in the configuration interface.
~ Rohit
Tags: Cisco Security
Similar Questions
-
How to use the build configuration options in the JDE
Hello
I have a few questions on the build options:
1 could someone explain to me: how to use Build-> Configuration-> opt as private, Debug, Release?
2. is it possible to add any option in the construction of rules in the official release, as all the lines as System.out.println ("... "); appear not in debug mode?
Thank you for your answer
Krzysztof
They allow you to quickly enable and disable sets of projects. For example, you can have a workspace with 4 projects, where some are dependent on each other, or you want to build different sets for different projects. You can set up something like:
Private = all active projects
Debug = 1 and 4 are active
Output = project 1, 2 and 3 are active.
You can then proceed to change the set of projects that are active.
-
Display fields in the User Configuration
Good day to all.
In the configuration of the interface, we have the user configuration option to define fields that appears when you configure individual users. When you go to User Configuration and click on a letter/number in the "list users starting with the letter /:" section, is possible to configure the display in the right pane which now shows just
User Status Group Network access profile We do not NAP is a useless field for us. I want to set it up for one of our pre-defined user configuration fields.
Thank you
Dwane
Dwane,
This view is not configurable. It may be a feature request.
Thank you
~ JG
Note the useful messages
-
WVC54GCA Missing WPA/WPA2 security in the web interface options
I just had a WVC54GCA and discovered that there are some missing configuration options in wireless settings:
On the web interface of cameras:
Web interface > base: Wireless Settings > [modify security settings] > Security Mode:
the drop-down list gives me two options: Disable WEP, but not WPA, WPA2.
I've upgraded to the latest firmware (1.1.00 build 02), but the problem remains.
Tried different browsers (Firefox 3.5, IE8) with the same result.
Is this a bug in the firmware? A defective unit? Anyone else having the same problem?
Try to reset your IE browser settings and then try to connect to your camera configuration page and check if you are able to find that the options... If it is still impossible to find the WPA/WPA2 Option on your camera, press and hold the reset button for 60 seconds... Release the reset button... Unplug the power cable from your camera, wait 60 seconds and reconnect the power cable...
Now check if you are able to find that the options... If still no so I think this could be the problem with the camera... I think that you need to replace your camera.
-
How to configure ACS 5.2 to manage the Junos 10.4R6.5 fwl via GANYMEDE.
Hi all
I have a camera ACS 5.2 newly installed, integrated with our announcement and his work with cisco product, routers switches and etc. Now I would like to include Juniper firewalls so to be authenticated via ACS 5.2 either via ssh and web access. Can someone share me how to initiate this, creating policies.
FYI: I have 14:00 groups regionaladm and regionalops, read/write and read-access, respectively.
Kind regards
Marlon
Marlon,
I stuck in a config below file I made for our ScreenOS Firewall work with Cisco ACS v5.2. This configuration may not work because yours is Junos, but it could bring closer you reach to understand. Also, if you have not been on the Juniper J-Net ask autour, give it a shot. (forums.juniper.net)
Good luck!
-Chris
Title: Example configuration - GSU of Juniper and Cisco ACS v5.x
Product: SSG320M juniper (Cisco ACS v5.x)
Version: 6.3.0r10.0 ScreenOS (Cisco ACS v5.2.0.26.8)
Network topology:
[Juniper SSG320M]-[Cisco 3560 Switch]-[Cisco ACS VM]
Description:
Goal - authenticate GSU administrators using GANYMEDE + instead of local connections
Description - This configuration for Cisco ACS v5.x, JTACS had only configuration v3.3.
ACS v5.x is a VM based on Linux with a completely new user interface and structure.
Configuration:
Configure the Juniper (CLI)
1. Add configuration Cisco ACS and GANYMEDE +.
Set id CiscoACSv5 of auth-server 1
set the auth-CiscoACSv5 server ServerName 192.168.1.100
set server CiscoACSv5-type of admin account
set the server CiscoACSv5 auth type Ganymede
Define auth-server CiscoACSv5 Ganymede secret CiscoACSv5
define CiscoACSv5 Ganymede 49 auth-server port
Set the server auth admin CiscoACSv5
Set admin auth distance primary
Remote admin auth root set
define outer-get administrator privilegesConfigure the Cisco ACS (GUI) v5.x
1. navigate to elements of strategy > authorization and permissions > peripheral Administration > Shell profiles
Create the profile of Shell of Juniper.
Click the button [create] at the bottom of the page
Select the general tab
Name: Juniper
Description: Custom for Juniper SSG320M attributes
Select the custom attributesAdd the vsys attribute:
Attribute: vsys
Requirement: required
Value: root
Click on the [Add ^] button above the field for the attributeAdd the attribute of privilege :
Attribute: privilege
Requirement: required
Value: rootNote : you can also use "read-write", but then the local admin does not work correctly
Click on the [Add ^] button above the field for the attribute
Click the button [send] at the bottom of the page2. navigate to access policies > Access Services > default device Admin > authorization
Create the authorization policy of Juniper and filter by IP address.
Click [customize] at the bottom right of the page
In terms of customize, select IP address in the left window
Click the [>] button to add
Click the [OK] button to close the windowClick the button [create] at the bottom of the page to create a new rule
In general, the name of the new rule Juniper and make sure that this option is enabled
In Conditions, check the box next to IP address
Enter the ip address of the Juniper (192.168.1.100)
Under results, click the [Select] button next to the Shell profile field
Select "Juniper" and click the [OK] button
Under results, click the [Select] button under the command field sets (if used)
Select "allow all the" and make sure all other boxes are not CHECKED
Click the [OK] button to close the window
Click the [OK] button at the bottom of the page to close the window
Check the box next to the policy of Juniper , and then move the policy to the top of the list
Click on the [Save] button at the bottom of the pageAudit:
Connect to the CLI of Juniper and GUI using an ACS internal user account and try to change something to check the level of privilege.
-
could not get the command configure working on acs5.3
Hello
I configured, command set to ACS5.3, so that it allows to run the show only command. The profile shell is set to level 15 privileges. I couldn't make it work. users are still able to run any command. How to make this work.
Thank you
Kerim
Missing orders "authorization".
For example, according to what you need to check with the ACS, you can use:
AAA authorization command 15 default group Ganymede + if authenticated
AAA command authorization 1 default group Ganymede + if authenticated
AAA authorization command 0 default group Ganymede + if authenticated
The previous commands means that whenever a user enters a command level 15/1/0 the client will check with the ACS if these commands are allowed or not.
In addition, in the set of controls you need not to use ' * ' in the section of the Argument, just 'show' under the section of command.
Don't forget to have a back door that is configured, you can avoid getting you locked, for example access to the consoles.
Let me know how it goes.
-
Cisco ACS 4.2: Question about the license...
Dear Sir
When I started this project, we start with the demo available on the Download Center on Cisco.
We have purchase a license and we expect the CD/DVD with the license.
But... How can I convert the 'demo' to a licensed version?
Should I reinstall Cisco ACS?
How the license is supplied, is a registry key? A small file?...?
Thanks in advance,
Make a backup of the current configuration, you want to keep it.
System configuration > backup ACS > backup now.
Then when you get the full version, just run the setup and it automatically detects the trial version, and invite you, if you want to keep the configuration or not, checks to keep the configuration and move forward. And you'll have improved trial full version.
There is not the registry keys concerned.
Kind regards
Prem
Please rate if this can help!
-
The network configured GBA 4.2 device report
I'm trying to shoot the report of all devices in the network configured in ACS. But I'm not able to pull it, can someone let me know how to extract the network devices configured in the device of the ACS.
If I understand the question, you want to export the AAA clients / network devices. You can get the aaa clients/devices information in excel sheet at the bottom of the steps:
Go to network setup > Search > maintains the search that is default parameter to search the entire. Press search. There will be a 'Download' option that will appear in the left corner of the search results. Click on save this list.
This list will include,
-Name
-IP address
-Type
-Name NDG (if applicable)
NOTE: this will not contain customer AAA Shared Secret keys have been configured with.
~ BR
Jatin kone* Does the rate of useful messages *.
-
Hi all
I am trying to configure wireless with 802.1 x, authetication in the EAP - TLS computer with digital certificates, but it does not work.
It runs on ACS 4.2.
The message is ACS CA is not known, but it is configured correctlry.
I have a "Wireless" accesses with identity store AD1 policy. I also tried to set up CN, SAN and a lot of identity store sequences, same results.
At the time of authentication, I also see this log message:
System encountered null or invalid message
CSCOacs_Internal_Operations_Diagnostics
31201
I could be associated to?
Can someone help me?
THX,
Andrea
I see the certificates installed have been already expired.
Regarding your second question, where do you see a mistake. I suspect a defect.
CSCtw48906 Error due to an empty message (vector buffer), sent to the enforcement process
Symptom: An Error Message is seen inlogs: message of the ERROR encountered CSCOacs_Internal_Operations_Diagnostics 31201 null or invalid system
Conditions: ACS 5.2
Solution: The issue is cosmetic. This message can be ignored.
Under the guidance of the Director, this occors error when a message empty (vector buffer) that was sent to the runtime on the message Bus and it seems to be "cosmetic" question
In default, debugging is attached. If you wish, you can activate the debbuging level performance logs and match symptoms.
Here are the steps to generate support bundle.
ACS / admin # acs - config
Escape character is CNTL/D.
Username: acsadmin
Password:
ACS/admin(config-ACS) #.
Set logging for debug mode.
ACS/admin(config-ACS) # debug level to debug-log duration
ACS/admin(config-acs) #exit
Collect the beam of support after reproducing the problem.
Jatin kone
-Does the rate of useful messages-
-
Anyone know of a doc covering using ACS 5.3 to control the VLAN using GANYMEDE?
Hello
If someone could help with this, I'd appreciate it.
I configured a system ACS 5.3 and all my groups etc fucniton corrcetly both for network access and for the Administration of the unit.
However I am stuck trying to allow clients to authenticate on the page web of the router or the Web authentication, using GANYMEDE + between the router and the ACS5.3.
I watched this and I need to configure a custom attribute of 'service' with the type bound and in relation to a permission policy.
I think that the custom configuration attributes is where I'm stuck.
Once agin thanks for any help
Brian
Your best bet is to use the RADIUS, ACS supports RADIUS and most of the time you try to users access to the network of your admins of device segment, and the best way to do that is using RADIUS versus Ganymede.
Thank you
Tarik Admani
* Please note the useful messages *. -
Mounting root failed. Falling into the shell of the basic maintenance
Hello
I bought a AMD Phenom X 4 955 3.2 GHZ processor, card mother gigabyte GA-MA785GM-US2H in support / 6 GB DDR2 RAM / 500 GB SATA drive for Vmware ESX 3.5 learning product.
In the above configuration, I have installed windows xp 64-bit operating systems and continue to install vmware workstation 6.5.
Since the VM workstation, I can able to install ESX3.5 UPDATE2, but I was not able to start properly, please visit below mentioned error.
"The root of mounting failed. Falling into the shell of basic maintenance.
To collect newspapers for VMware, connect a USB storage device and
Run "bin/vm-support.
Machine will be rebooted when you get out of that shell. »
The same has been tested on windows 2003 Enterprise Edition server / windows 7 32-bit / windows 7 64 bit also, please help me solve the problem.
Hello
So if I understand you well, then the configuration 'ESX in a box' now works for you, except that you see only a single error NUMBER?
I am not convinced that NUMA is supposed to work in this environment, but I have no material here to test and verify your results.
NUMA support requires specific BIOS and physical characteristics of the motherboard.
Here are a few more documents on this subject.
Ensure your hardware is working properly
VMware ESX server monitor internal error * vcpu-0: make the bugNr = 17332
The second document has notes on how to disable the error if it bothers you.
You can also try to increase the memory on the ESX host and see if that helps.
--
Wil
_____________________________________________________
VI-box tools & scripts wiki at http://www.vi-toolkit.com
-
Hi all
I got following error while cloning an instance of R12 on HP UX.
After having copied from source to target, I ran perl adcfgclone.pl dbTechStack.
error...
Start the synchronization context file system and its models with those of the database
Database connection: impossible
Support changing context OAM function: unverified
Support OAM customization feature: unverified
File system model: /erpdev1/orarsu/db/tech_st/10.2.0/appsutil/template/adxdbctx.tmp
.
.
.
No download file of context and its data base models. Connection to database failed
.
.
.
[AutoConfig error report]
The following report lists the errors autoconfig met in each
execution phase. Errors are grouped by directory and by phase.
The format of the report is:
< file name > < phase > < eventually return code >
[INSTANTIATE PHASE]
AutoConfig impossible successfully to instantiate the following files:
Directory: /erpdev1/orarsu/db/tech_st/10.2.0/appsutil/install/RSU_reeldev
adcrdb.sh INSTE8
Fate of automatic configuration with State 1
RC-50014: Fatal: failed to run the auto configuration service
Asked by oracle.apps.ad.clone.ApplyDBTechStack
Kind regards
Sandeep.Hi user;
Please check:
12 adcfgclone release fails with AC-00423, RC-50014 adcrdb.sh lack of filesystem [549872.1 ID]
RC-50004: Fatal: error occurred running adcfgclone.pl dbTier RDBMS 64 bit [336875.1 ID]It may be useful
Respect of
HELIOS -
worried about the going 10.10.5 Yosemite to El Capitan. Especially with only 4 GB of ram. Have 256 GB SSD HARD drive
would appreciate an answer from people already have the upgrade.problems with the same configuration? slower?
FWIW, the El Capitan applications are no different from Yosemite. In fact, it is easier on resources in some areas. The main thing you need to worry is to make sure the software and equipment to use is compatible. Make sure you have a good backup in case you change your mind and want to downgrade.
-
Cannot move preview pane upward or downward in the classic configuration
Cannot move suddenly preview pane upward or downward in the classic configuration. Currently stuck at the bottom. Have to double-click to display a message... OS 10.11.3 retina IMac tried restarts. several attempts of keyboard and mouse.
Don,
Keep trying... I found that simply getting a good lens.
You can also try this diet between Classic and Classic 'no '.
-
Toshiba 46TL938G loses the WLan configuration after stopping down
Hello
46TL938G unpacked yesterday, updated the firmware on the Internet.
Wireless set in place with WPS works, but configuration is lost after turning the TV market / back.
I can't use assisted because of hidden SSID configuration.In manual mode, I always get a bad autorhization information and/or encryption not supported. Access point uses WPA2-PSK AES.
Is it possible to Setup WPS paste?
Any news?
I recommend you try different configuration scenarios:-try password that are more than 8 to 10 characters.
-Try different encryptions: WPE / WPA - PSK / WPA2-PSK (AES, TKIP or AES and TKIP)
-try to connect with prior authentication ON and OFF
-try to connect to the WLan using option hidden network - enabled or disabled
Maybe you are looking for
-
Satellite C875-123 - media verification fails
Hello I just bought a pc Satellite C875-123 in a bid knowing that person empty the computer but I don't know how they did it exactly. "So when I turn on the pc after the Toshiba logo, message playing on a line:"Media verification failed"can Media Con
-
I have a 64-bit processor in a 5 years old Mac?
I just loaded Photoshop elements 14 on my computer and you can use it pretty well, but I noticed that some of the windows are not as they appear in my book of elements kelby. Wonder if the processor in this Mac is quadruple-heart, because that's what
-
Satellite A505-S6973 - failure watch start up Service
Goodday everyone, I seem to have some difficulties with my service power standby, when I restart my system I get an error message "Toshiba Power Saver Service impossible To Start ', I looked for answers, but the solutions I've read were pc who perfor
-
I developed a webpage using Microsoft Publisher 97. I made the bottom of the pages a color special and changed the color of the text on some points. When I download the page via sftp, and then he discovers the background is white and the colours of
-
I'm curious to know if some CC adobe plans have various limits on the number of computers that can under license. Some business plans allow more than two computers that will be on the license?