ACS 5.4 installation on vmware workstation

Similar Questions

• installation of vmware workstation 6.5 on windows 10 error

  After you install vmware workstation 6.5 on windows 10 it gets error and restart. Is vmware workstation 6.5 support windows 10? FAILED TO INSTALL. vmware workstation 6.5 on windows 8, 8.1 and 10 support. ALL SUPPORT. I still don't understand...

  VMware Workstation 6.x do not support Windows 10 and will never support Windows 10.

  VMware Workstation 6.x reached "end of support" four years, October 1, 2011: Matrix.pdf product lifecycle

  We produce updates for release until its date of "end of support".  A product may not work properly with host OSes, processors or comments OSes that are not compatible with the product, especially the things that have been published after the date of "end of support".  We put a huge amount of effort to ensure that new hardware and operating systems works with each new major release of VMware Workstation, but we cannot go back and update any previous version of product to add support for all hardware and operating systems more recent.  If we tried to do this, VMware Workstation cost much more that it is today, simply because of the amount of work required to maintain!

  You need to upgrade your installation of VMware Workstation to something more recent, or downgrade your host operating system to a version compatible with VMware Workstation 6.5.

  I hope this helps!

  --

  Darius

• Installation of VMWare Workstation 11 freezes with gray screen!

  Hello

  I know this is a very known issue, but difficult to solve, I can't install VMWare Workstation V11 (tried with the old version 8, the same) since as soon as I click Setup, I have a gray screen and installation seems suspended it.

  Tried the same thing with VMWare Player, same result, even with older versions...

  No way to close the gray screen, unless you kill the process.

  My case is laptop Thinkpad T510, native W7 64-bit, processor Intel i5, 4 GB ram, Java utility installed and 100% updated, Nvidia GPU, nothing strange.

  Microsoft Security essential only running, no other AV or firewall...

  I tried to save two files reading autour on this community, but this does not solve the problem.

  I see not what is a well known problem and it is absurd does not have a way to solve it on VMWare...

  Any help is very appreciated!

  Thank you very much

  Concerning

  Denis Ferrari

  Hi all

  problem solved right and - in my case - was a strange key with a small '' L '' name to cancel here:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\

  It may be useful

• Installation of VMWare Workstation 11.1.0 on Win 8.1 is THAT MSI will fail with the error "could not write value vmware - tray.exe for \software\microsoft\windows'currentversion\run-cles.

  Hi all

  The MSI failed with the error message as "could not write value vmware - tray.exe in \SOFTWARE\Microsoft\Windows'CurrentVersion\Run key.  Make sure you have fufficient access to that key, or contact your support staff' while trying to install vmware workstation 11.1.0 in windows 8.1.
  I tried to call the installer with run as administrator but it does not help, please suggest me overcome this error.

  Hi Vincentand welcome to the VMware communities!

  This error indicates that you have some security software (antivirus or antimalware software) that protects the part of the registry.  Can you try to temporarily disable all security software on your host computer and see if the installation can move forward?

  See you soon,.

  --

  Darius

• Installation of VMWare Workstation on Fedora 20 10.1

  Hello VMWare community!

  So I tried for the past few days to install VMWare on my workstation. I tried both VMWare Workstation 9 and 10, but that didn't work either. The problem is just after installation, when are compilation of kernel modules.

  Here is the log:

  [root@hunt33rsmobilelinux downloads] # cat /tmp/vmware-root/vmware-modconfig-10793.log

  2014-03 - 01 T 14: 43:20.629 + 01:00 | vthread-3 | I120: Log for VMware Workstation pid = version 10.0.1 10793 = build = build-1379776 option = output

  2014-03 - 01 T 14: 43:20.629 + 01:00 | vthread-3 | I120: The process is 64-bit.

  2014-03 - 01 T 14: 43:20.629 + 01:00 | vthread-3 | I120: Host codepage = UTF-8 encoding = UTF-8

  2014-03 - 01 T 14: 43:20.629 + 01:00 | vthread-3 | I120: Host is the version of Fedora Linux 3.13.4 - 200.fc20.x86_64 20 (Heisenbug)

  2014-03 - 01 T 14: 43:20.628 + 01:00 | vthread-3 | I120: Msg_Reset:

  2014-03 - 01 T 14: 43:20.628 + 01:00 | vthread-3 | I120: [msg.dictionary.load.openFailed] cannot open the file ' / usr/lib/vmware/settings ': no such file or directory.

  2014-03 - 01 T 14: 43:20.628 + 01:00 | vthread-3 | I120: ----------------------------------------

  2014-03 - 01 T 14: 43:20.628 + 01:00 | vthread-3 | I120: Preferences file of the option PREFS not found in/usr/lib/vmware/settings. Using the default values.

  2014-03 - 01 T 14: 43:20.628 + 01:00 | vthread-3 | I120: Msg_Reset:

  2014-03 - 01 T 14: 43:20.628 + 01:00 | vthread-3 | I120: [msg.dictionary.load.openFailed] cannot open the file ' / root/.vmware/config ': no such file or directory.

  2014-03 - 01 T 14: 43:20.628 + 01:00 | vthread-3 | I120: ----------------------------------------

  2014-03 - 01 T 14: 43:20.628 + 01:00 | vthread-3 | I120: Optional preferences PREFS not found in root/.vmware/config file. Using the default values.

  2014-03 - 01 T 14: 43:20.628 + 01:00 | vthread-3 | I120: PREF cannot verify the permissions for the preferences file.

  2014-03 - 01 T 14: 43:20.628 + 01:00 | vthread-3 | I120: Msg_Reset:

  2014-03 - 01 T 14: 43:20.628 + 01:00 | vthread-3 | I120: [msg.dictionary.load.openFailed] cannot open the file ' / root/.vmware/preferences ': no such file or directory.

  2014-03 - 01 T 14: 43:20.628 + 01:00 | vthread-3 | I120: ----------------------------------------

  2014-03 - 01 T 14: 43:20.628 + 01:00 | vthread-3 | I120: PREF cannot load the user's preferences.

  2014-03 - 01 T 14: 43:20.629 + 01:00 | vthread-3 | W110: Connecting to /tmp/vmware-root/vmware-modconfig-10793.log

  2014-03 - 01 T 14: 43:20.632 + 01:00 | vthread-3 | I120: Obtaining information on the use of the kernel running.

  2014-03 - 01 T 14: 43:20.632 + 01:00 | vthread-3 | I120: Created new pathsHash.

  2014-03 - 01 T 14: 43:20.632 + 01:00 | vthread-3 | I120: Setting header way for 3.13.4 - 200.fc20.x86_64 to "/ lib/modules/3.13.4-200.fc20.x86_64/build/include".

  2014-03 - 01 T 14: 43:20.632 + 01:00 | vthread-3 | I120: Validation of path ' / lib/modules/3.13.4-200.fc20.x86_64/build/include ' for kernel version "3.13.4 - 200.fc20.x86_64.

  2014-03 - 01 T 14: 43:20.632 + 01:00 | vthread-3 | I120: using/usr/lib64/ccache/CCG to preprocess check

  2014-03 - 01 T 14: 43:20.638 + 01:00 | vthread-3 | I120: Pre-treated UTS_RELEASE, obtained the value "3.13.4 - 200.fc20.x86_64.

  2014-03 - 01 T 14: 43:20.638 + 01:00 | vthread-3 | I120: The path of the header ' / lib/modules/3.13.4-200.fc20.x86_64/build/include ' to the core "3.13.4 - 200.fc20.x86_64" is valid.  Boo!

  2014-03 - 01 T 14: 43:20.721 + 01:00 | vthread-3 | I120: Reading in info for the vmmon module.

  2014-03 - 01 T 14: 43:20.721 + 01:00 | vthread-3 | I120: Reading in info for module vmnet.

  2014-03 - 01 T 14: 43:20.721 + 01:00 | vthread-3 | I120: Reading in info for the vmblock module.

  2014-03 - 01 T 14: 43:20.721 + 01:00 | vthread-3 | I120: Reading in info for vmci module.

  2014-03 - 01 T 14: 43:20.721 + 01:00 | vthread-3 | I120: Reading in info for the vsock module.

  2014-03 - 01 T 14: 43:20.721 + 01:00 | vthread-3 | I120: Definition of vsock to depend on vmci.

  2014-03 - 01 T 14: 43:20.721 + 01:00 | vthread-3 | I120: Modinfo calling over 'vmmon.

  2014-03 - 01 T 14: 43:20.723 + 01:00 | vthread-3 | I120: ' / sbin/modinfo ' came out with a status of 0.

  2014-03 - 01 T 14: 43:20.723 + 01:00 | vthread-3 | I120: Modinfo invoking on "vmnet".

  2014-03 - 01 T 14: 43:20.724 + 01:00 | vthread-3 | I120: ' / sbin/modinfo ' came out with status 256.

  2014-03 - 01 T 14: 43:20.724 + 01:00 | vthread-3 | I120: Modinfo invoking on 'vmblock '.

  2014-03 - 01 T 14: 43:20.725 + 01:00 | vthread-3 | I120: ' / sbin/modinfo ' came out with status 256.

  2014-03 - 01 T 14: 43:20.725 + 01:00 | vthread-3 | I120: Modinfo calling over 'vmci.

  2014-03 - 01 T 14: 43:20.727 + 01:00 | vthread-3 | I120: ' / sbin/modinfo ' came out with status 256.

  2014-03 - 01 T 14: 43:20.727 + 01:00 | vthread-3 | I120: Modinfo calling over 'vsock.

  2014-03 - 01 T 14: 43:20.728 + 01:00 | vthread-3 | I120: ' / sbin/modinfo ' came out with a status of 0.

  2014-03 - 01 T 14: 43:20.735 + 01:00 | vthread-3 | I120: must be installed: vmnet status: 0

  2014-03 - 01 T 14: 43:20.742 + 01:00 | vthread-3 | I120: Obtaining information on the use of the kernel running.

  2014-03 - 01 T 14: 43:20.742 + 01:00 | vthread-3 | I120: Setting header way for 3.13.4 - 200.fc20.x86_64 to "/ lib/modules/3.13.4-200.fc20.x86_64/build/include".

  2014-03 - 01 T 14: 43:20.742 + 01:00 | vthread-3 | I120: Validation of path ' / lib/modules/3.13.4-200.fc20.x86_64/build/include ' for kernel version "3.13.4 - 200.fc20.x86_64.

  2014-03 - 01 T 14: 43:20.742 + 01:00 | vthread-3 | I120: using/usr/lib64/ccache/CCG to preprocess check

  2014-03 - 01 T 14: 43:20.748 + 01:00 | vthread-3 | I120: Pre-treated UTS_RELEASE, obtained the value "3.13.4 - 200.fc20.x86_64.

  2014-03 - 01 T 14: 43:20.748 + 01:00 | vthread-3 | I120: The path of the header ' / lib/modules/3.13.4-200.fc20.x86_64/build/include ' to the core "3.13.4 - 200.fc20.x86_64" is valid.  Boo!

  2014-03 - 01 T 14: 43:20.830 + 01:00 | vthread-3 | I120: Kernel header path comes from FileEntry: /lib/modules/3.13.4-200.fc20.x86_64/build/include

  2014-03 - 01 T 14: 43:20.830 + 01:00 | vthread-3 | I120: update the kernel header path to the /lib/modules/3.13.4-200.fc20.x86_64/build/include

  2014-03 - 01 T 14: 43:20.830 + 01:00 | vthread-3 | I120: Validation of path ' / lib/modules/3.13.4-200.fc20.x86_64/build/include ' for kernel version "3.13.4 - 200.fc20.x86_64.

  2014-03 - 01 T 14: 43:20.830 + 01:00 | vthread-3 | I120: using/usr/lib64/ccache/CCG to preprocess check

  2014-03 - 01 T 14: 43:20.837 + 01:00 | vthread-3 | I120: Pre-treated UTS_RELEASE, obtained the value "3.13.4 - 200.fc20.x86_64.

  2014-03 - 01 T 14: 43:20.837 + 01:00 | vthread-3 | I120: The path of the header ' / lib/modules/3.13.4-200.fc20.x86_64/build/include ' to the core "3.13.4 - 200.fc20.x86_64" is valid.  Boo!

  2014-03 - 01 T 14: 43:20.838 + 01:00 | vthread-3 | I120: Compiler found at "/ usr/lib64/ccache/gcc.

  2014-03 - 01 T 14: 43:20.841 + 01:00 | vthread-3 | I120: Got gcc version "4.8.2.

  2014-03 - 01 T 14: 43:20.841 + 01:00 | vthread-3 | I120: The GCC version corresponds to the minor version of GCC kernel like a glove.

  2014-03 - 01 T 14: 43:20.841 + 01:00 | vthread-3 | I120: With the help of the compiler provided by the user "/ usr/lib64/ccache/gcc.

  2014-03 - 01 T 14: 43:20.844 + 01:00 | vthread-3 | I120: Got gcc version "4.8.2.

  2014-03 - 01 T 14: 43:20.844 + 01:00 | vthread-3 | I120: The GCC version corresponds to the minor version of GCC kernel like a glove.

  2014-03 - 01 T 14: 43:20.847 + 01:00 | vthread-3 | I120: Try to find a PBM adapted for the core "3.13.4 - 200.fc20.x86_64.

  2014-03 - 01 T 14: 43:20.847 + 01:00 | vthread-3 | I120: No corresponding PBM set has been found for the core "3.13.4 - 200.fc20.x86_64.

  2014-03 - 01 T 14: 43:20.847 + 01:00 | vthread-3 | I120: The GCC version corresponds to the minor version of GCC kernel like a glove.

  2014-03 - 01 T 14: 43:20.847 + 01:00 | vthread-3 | I120: Validation of path ' / lib/modules/3.13.4-200.fc20.x86_64/build/include ' for kernel version "3.13.4 - 200.fc20.x86_64.

  2014-03 - 01 T 14: 43:20.847 + 01:00 | vthread-3 | I120: using/usr/lib64/ccache/CCG to preprocess check

  2014-03 - 01 T 14: 43:20.853 + 01:00 | vthread-3 | I120: Pre-treated UTS_RELEASE, obtained the value "3.13.4 - 200.fc20.x86_64.

  2014-03 - 01 T 14: 43:20.853 + 01:00 | vthread-3 | I120: The path of the header ' / lib/modules/3.13.4-200.fc20.x86_64/build/include ' to the core "3.13.4 - 200.fc20.x86_64" is valid.  Boo!

  2014-03 - 01 T 14: 43:20.857 + 01:00 | vthread-3 | I120: The GCC version corresponds to the minor version of GCC kernel like a glove.

  2014-03 - 01 T 14: 43:20.857 + 01:00 | vthread-3 | I120: Validation of path ' / lib/modules/3.13.4-200.fc20.x86_64/build/include ' for kernel version "3.13.4 - 200.fc20.x86_64.

  2014-03 - 01 T 14: 43:20.857 + 01:00 | vthread-3 | I120: using/usr/lib64/ccache/CCG to preprocess check

  2014-03 - 01 T 14: 43:20.863 + 01:00 | vthread-3 | I120: Pre-treated UTS_RELEASE, obtained the value "3.13.4 - 200.fc20.x86_64.

  2014-03 - 01 T 14: 43:20.863 + 01:00 | vthread-3 | I120: The path of the header ' / lib/modules/3.13.4-200.fc20.x86_64/build/include ' to the core "3.13.4 - 200.fc20.x86_64" is valid.  Boo!

  2014-03 - 01 T 14: 43:20.863 + 01:00 | vthread-3 | I120: Temp dir using ' / tmp '.

  2014-03 - 01 T 14: 43:20.864 + 01:00 | vthread-3 | I120: Obtaining information on the use of the kernel running.

  2014-03 - 01 T 14: 43:20.864 + 01:00 | vthread-3 | I120: Setting header way for 3.13.4 - 200.fc20.x86_64 to "/ lib/modules/3.13.4-200.fc20.x86_64/build/include".

  2014-03 - 01 T 14: 43:20.864 + 01:00 | vthread-3 | I120: Validation of path ' / lib/modules/3.13.4-200.fc20.x86_64/build/include ' for kernel version "3.13.4 - 200.fc20.x86_64.

  2014-03 - 01 T 14: 43:20.864 + 01:00 | vthread-3 | I120: using/usr/lib64/ccache/CCG to preprocess check

  2014-03 - 01 T 14: 43:20.870 + 01:00 | vthread-3 | I120: Pre-treated UTS_RELEASE, obtained the value "3.13.4 - 200.fc20.x86_64.

  2014-03 - 01 T 14: 43:20.870 + 01:00 | vthread-3 | I120: The path of the header ' / lib/modules/3.13.4-200.fc20.x86_64/build/include ' to the core "3.13.4 - 200.fc20.x86_64" is valid.  Boo!

  2014-03 - 01 T 14: 43:20.951 + 01:00 | vthread-3 | I120: Modinfo invoking on "vmnet".

  2014-03 - 01 T 14: 43:20.953 + 01:00 | vthread-3 | I120: ' / sbin/modinfo ' came out with status 256.

  2014-03 - 01 T 14: 43:20.993 + 01:00 | vthread-3 | I120: The setting for vmnet destination path to ' / lib/modules/3.13.4-200.fc20.x86_64/misc/vmnet.ko '.

  2014-03 - 01 T 14: 43:20.993 + 01:00 | vthread-3 | I120: Extraction of the source vmnet "/ usr/lib/vmware/modules/source/vmnet.tar".

  2014-03 - 01 T 14: 43:20.996 + 01:00 | vthread-3 | I120: Extract successfully the vmnet source.

  2014-03 - 01 T 14: 43:20.996 + 01:00 | vthread-3 | I120: Module construction with the command ' / usr/bin/make - j8 - C/tmp/modconfig-zXW96r/vmnet-only-automatic generation HEADER_DIR=/lib/modules/3.13.4-200.fc20.x86_64/build/include CC = / usr/lib64/ccache/gcc IS_GCC_3 = no ".

  2014-03 - 01 T 14: 43:22.104 + 01:00 | vthread-3 | W110: Vmnet failed.  Cannot run the command build.

  I have tried of course updated everything. yum update is ok, so I'm a bit with no idea.

  So, did you ever find this problem?

  Thank you

  Matthew

  • Fedora is not a host for VMware Workstation/Player-supported operating system.  Note that although not officially supported as a host nevertheless operating system I run it under Fedora 20, but with the stock kernel.
  • I do not think that the 3.13.4 kernel is still supported, even on a supported host OSes.
  • Take a look at: VMware modules & core 3.13

• Failed installation of VMware Workstation 9 on new install of win 7

  I looked at the discussion of installation has failed VMware Workstation 9, verified that I am administrator, cleaned folder and looked at the registry and I'm still having problems.  The name of the account used is not Admin/Admin or anything close.

  This is a new installation today of windows 7 with all updates applied.  Avast is my anti-virus software.  The behavior does not change with it running or disabled.

  I think that the problem to be that KLM/Sofware/VMware Inc. does not appear.  I checked that I can create keys.

  "In my installs I've seen: message" failure of the MSI MSI "and once"the MSI MSI failed. "  Authorization of VMware (VMAuthService) failed to start service.

  Here are the logs from my last install.

  Can someone provide me with more information about the problem and how to get this installed?

  Thank you

  Finally got this resolved after many setup logs sent to VMware.  I came across the registry problems and VMAuthdServices fail to start due to software AV.

  In short, following http://kb.vmware.com/kb/1031302 (KB1031302) is important as well as some comments from howellrj.  Here's what I did in detail and why during my various tests of installation:

  http://KB.VMware.com/kb/1031302

  1 I used the only account on the system, which did not have a name as owner, admin, administrator, which has administrator privileges

  2 wiped % TEMP % whenever I made an attempt to install

  3 MS KB 942288 not recommended for Win7 so I jumped

  4 no earlier version of VMware Workstation has been installed on the system, so I jumped

  5 ran http://support.microsoft.com/kb/2438651/en-us (MS KB2438651) whenever I made an attempt to install.  He has never found anything wrong

  6 was not running WinXP so I jumped

  7 has made run msconfig to disable all services and should follow https://support3.avast.com/index.php?_m=knowledgebase&_a=viewarticle&kbarticleid=1334 (Avast KB1334) to disable Avast self protection mode.  Even with Avast protection auto mode disabled and all the disabled Avast shields were always running and prevent.  The only way to clear the checkpoint was to remove Avast completely.

  8 I ran sfc/scannow before each installation to be sure.  No problems have ever been found.

  So, here is what I did to get the software installed successfully:

  An item copied to my system

  1 AV Installer on my system

  2 use FixIt of MS KB 2438651

  Disconnected the network B

  C restart the system with network not connected

  D removed Avast

  E to restart the system with network not connected

  1 erase TEMP

  2 Ran FixIt utility of MS KB 2438651

  3 ran sfc/scannow

  F install VMware Workstation

  G restart the system

  H check VMware Workstation starts

  I install Avast

  J stop the system

  K connecting to the network

  L reboot the system with connected network

  M update Avast

  N reconfigure Avast

• (Beginner) of the initial steps for the new installation of vmware workstation & guest os

  Hi, very new for the virtual machine. I need help on what type of software (vmware), need and the first steps of the installation.

  Current configuration: a portable 3 separate HD, 1 computer = Windows 7, 2 = XP, 3 is Linux RH. I have manually swap HD to work on each operating system.

  Req: A laptop with Windows 7 as main OS and two other OS (XP and Linux) Guest.

  (1) I prefer not to install OS and the entire application again for the guest operating system (XP and linux), will like to convert, copy, etc.

  (2) can I install multiple OS (XP) for testing of applications and then delete them?

  (3) can I use a different version of an application in a guest operating system?

  The software that I need to buy:

  VMware workstation 7.1

  Version of the converted VMware?  (this may be free, I think)

  ThinApp 4. ???

  If these are vmware software that I need is a step by step installation, in particular of the convert.

  Thank you, ralph

  Hi Raoul,.

  Welcome to the forums.

  VMware vCenter Converter Standalone is a free download that is accessible to everyone, so you can use it to convert your existing machines.

  For testing purposes, you can create a virtual machine "or" with all standard applications, and then use the function 'linked-clone"of the workstation. In this way, you can have several machines quickly with the same basic configuration to test different applications.

  It is more complicated to have multiple versions of the same application in a single virtual machine. ThinApp seems to be the solution, but it should require the application packages (I have no experience with ThinApp) construction. It's a bit complicated just to test. Way the easiest would be to create a new virtual machine for each version of the application.

  Workstation and the converter are very easy to install if you use a standard configuration.

  Good luck.

  Concerning

  Franck

• Installation of VMWare Workstation in Ubuntu [Hardy - Haron]

  Hello Gil,.

  I'm newbie in Linux. I was already using VMWare workstation in my windows.

  Now, I want to install the same version of http://Hardy - 8.04 Ubuntu linux.

  I was downloaded package VMware-Workstation - e.x.p - 240242.i386.bundle more here.

  Can anyone suggest me the steps for installation?

  Thank you.

  Hello

  You can follow this video. It shows how to install Workstation 6.5 on Ubuntu, but it should work for Workstation 7 also.

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. ¡¡MUCHAS gracias!

  Virtually noob blog

• Any Installation of Vmware Workstation failed in my machine, why? See the details

  

  Hey guys, I'm trying to install vmware workstation 11,10 even though 9, but unfortunately it shows this kind of error every time.

  then I try to install from appdata/local/temp, but it shows the error of capture4... I tried many things to fix this... but I failed...

  So guys help me please install... sorely lacking...

  is my laptop config: core i5 - 3230M, ram - 4 GB os-win7 64 bit sp1...

  need help please...

  Welcome to the community,

  the problem is probably caused by the apostrophe in the name of the folder of the user. Try at each logon with a different user (temporary) account, or change the temp/tmp environment variable to point to a different directory (existing), for example, "C:\TEMP".

  André

• SRM Installation of VMware workstation.

  Hello Experts,

  Is it possible to install the complete SRM in vmware workstation?

  Thank you

  VAMSi

  Hello

  Yes, it is possible

  Here you how to configure vCenter and ESXi on WS

  http://vmwaremine.com/2011/09/23/how-to-set-up-a-home-lab-for-vspehre-4/

  Below how to configure SRM on workstation

  http://www.virtuallifestyle.nl/2008/11/VMware-site-recovery-manager-with-lefthand-VSA/

  Good luck

  See you soon
  Artur
  

  Please, do not forget the points of call of the "useful" or "correct" answers

• Problem with the Installation of VMWare Workstation 8

  I got this error when installing VMWare Workstation 8

  How can I solve this problem?

  

  Whether or not, it gives me this

  

  and then nothing happens

  Looks like your way of temp has 2 problems - firstly, it is quite long; Secondly, there is a strange character in.

  Try changing your environment a simple C:\TEMP or C:\Windows\Temp folder variable.

• Installation of VMware workstation in a machine with vmware server 2.0 is already installed?

  is it possible to install the latest version of vmware workstation (I guess that's 6.5) in a machine where vmware server 2.0 is already installed? where possible there at - it something I should know before installing vmware workstation (eg. problems known, network suspends etc.)? in particual I am a little concerned network mangement (eg. both vmware server and vmware workstation in fact add virtaul adapters: is a possible trouble caouse?). The host of the virtual machine is vista ultimate x 64 with 8gig of ram and a quad core cpu.

  I did a little research, and from what I understand, this was not possible with vmware server 1.0 x.. as the situation has changed with vmware server 2.0?

  (in case you are wondering why I sholud be willing to do):

  I worked with vm ware Server 2.0 for about a year, but now I miss some of the features that are only present in vmware workstation: multiple snapshot and clone VM vm ware server... However is much more flexible when you don't have physical access to your VM host... so I was wondering if it is possible to get the best of both worlds : I would like to use vm ware workstation allows you to configure virtual machines and manage snapshots and vmware server to remotely manage virtual machines, I've created with workstation. Is it not possible?

  Thanks in advance for your attention

  We discussed some time ago

  See this post for the results

  http://communities.VMware.com/message/1309546#1309546

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• Qosmio F50-111: control buttons stopped working using VMWARE Workstation

  Hello

  Since I've installed VMWARE Workstation v6.0.3, my touch buttons (play, pause, stop, media library, next, previous, updated muted and light webcam and dolby) stopped working.

  So I chose Restore my Vista before installing on my VMWARE of ve. It works again my buttons work...

  BUT I need to install this software (vmware) for my use of employment.

  I've tried remove and install then new value-added Package from Toshiba Web site, but it does not work.

  Please help me

  This means that applications (in TBS folder, such as TDspBtn.exe, TBSbtnSt.exe,...) start running, but stops immediately.

  Thank you for coming to help

  Here the solution:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=181231

  + After the installation of vmware workstation 6.x or 7 - the default setting is "Disable Autorun on the host". (you can find it in: Edit-> preferences-> devices). +
  + Clear hook and restart. After the reboot, the buttons should be working. +

• Toshiba button Support do not work with VMware Workstation

  Hi all

  for all people having the same problem - * Support Button Toshiba do not work after the installation of VMware Workstation.*

  Short solution:
  After the installation of vmware workstation 6.x or 7 - the default setting is "Disable Autorun on the host". (you can find it in: Edit-> preferences-> devices). Release the hook and restart. After the reboot, the buttons should be working.

  The long version:
  Support Button Toshiba uses the Windows function "MobilePC" - > "Hotstart". HotStart only works when the autostart feature is not disabled (the value of registry key: + HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Po licies\Explorer\NoDriveTypeAutoRun + has the value 0xFF). VMware is the default to disable Autorun of CD/DVD. Turn on the autorun, restart the Qosmio and Hotstart (and also Toshiba button support) works very well. That's the problem.

  Greeting
  Thomas Wermuth

  Thanks for the solution. :)

• Cannot install VMWare workstation... Help, please

  Greetings and respect, community.

  I'm having a problem installing VMWare Workstation 8 or 9...

  Here is the error message

  Error: 'c:\users\admin~1\AppData\Local\Temp\vmware_1371916406\vmware workstation.msi' failed

  I deleted TEMP files. I did everything that I could find about this error.

  
  

  My laptop configuration
  

  Oenvironment system: Windows 7 Ultimate 64 - bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.130104 - 1431)

  Language: English (regional setting: English)

  Manufacturer: Hewlett-Packard

  Model: HP Pavilion Notebook PC g6

  BIOS: Version InsydeH2O 03.61.01F.32

  Processor: Intel (r) Core i3 - 2330M CPU @ 2.20 GHz (4 CPUs), ~2.2GHz

  Memory: 4096 MB RAM

  Available OS memory: 4044MB RAM

  Page file: 3003MB used, 5081 MB of available space

  Windows Dir: C:\Windows

  Please help me solve this error message
  

  
  

  Hi akpraveenand welcome to the VMware communities!

  Your laptop has Avast! Antivirus installed?  We have seen some recent reports of Avast! origin of the failure you see there.  If you have Avast! installed, you will need to uninstall temporarily to be able to install VMware Workstation (disabling Avast! is not enough).

  If you use another system antivirus or antimalware software, it may be interesting to try to disable it during the installation of VMware Workstation.

  Let us know if that solved the problem for you!

  --

  Darius