ACS any Version with Windows Server 2008 R2 64-bit domain controller

Similar Questions

• HP Proliant ML350G6 with windows server 2008 standard 32-bit memory system installled is 22 gb but the physical memory is only show 4095 MB

  We are facing problems of physical memory to the hp Server model: HP Proliant ML350G6 with windows server 2008 standard 32-bit.
  The memory of the system installled is 22 gb but showing physical memory is 4095 MB only.pls give me the solution for this.

  * original title - NOT of the PHYSICAL MEMORY MONTRANT CORRECTLY *.

  According to this the max is 4 GB for this version and 32 GB for 64-bit. You need to install 64-bit

• Is there a version of Windows server 2008 r2 32 bit out?

  Hello is windows server 2008 r2 32 bit realsed or in use

  Ever heard of Google?

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• How to: install Windows Server 2008 R2 (64-bit) in ESXi 4.1 - 260247 with controller 'LSI Logic SAS'?

  Hello

  I have a newly installed ESXi 4.1 - 260247 on a Fujitsu - Siemens GROUND RX300 S4 with 2 x Intel Xeon E5420 @ 2.5 GHz with 36 GB of RAM.

  Storage controller is a LSI MegaRAID SAS 1078 6 x 750 GB SATA - drives configured with 3xRAID-1 logical drives. BIOS Version 4.06 Rev 1.04.2519

  Now, I'm trying to install "Microsoft Windows Server 2008 R2 64-bit" in a virtual machine, but fail because the virtual hard disk cannot be found.

  I tried with all Types of SCSI controller, but when running of the "Create Virtual Machine"-magician, he suggests 'LSI Logic SAS'. "." I tried 'LSI Logic parallel' and "VMware Paravirtual" but it did not work. However, I have not tried "Parallel BusLogic", since it clearly says no "recommended for this guest operating system".

  I was unable to find documentation on how and where I can find the "LSI Logic SAS" - pilot to be able to continue the installation. The

  Windows Server 2008 R2 installation is an ISO obtained directly from Microsoft eLicensing.

  I also downloaded the drivers floppy 'pvscsi - Windows2008.flp' and 'vmscsi.flp' from the ESXi server, but the program finds no driver validates the installation of Windows on them.

  I also extracted files "windows.iso' of the ESXi machine, but not drivers there as well.

  So my question is, what model is the "LSI Logic SAS", I guess I can download these LSI directly, I need to know what model?

  Any help appreciated.

  Thank you!

  Kind regards

  Christian

  chrkad,

  I think you have the same problem I had.   Trying to install 2008 R2 and asked for drivers?

  The issue wound up being an ISO corrupt Ms.

  Try to download the ISO using the java-based download manager.  This will tell you if your download is getting disturbed, as mine was.  It will also be the image once completed to ensure you've got the whole thing of checksum.  Just download via HTTP does not.

  I found myself in download the image of the House and burn a DVD and realize that the back of the office,

• How to install Windows 8 Pro cd image in the Windows Deployment Services on the 32-bit version of Windows Server 2008?

  Hello.

  I wanted to ask you for example in Windows Server 2008 32-bit when there are Windows Deployment Service. From there you can add images and then you can install windows on the network. So I wanted to try to do it with the cd Windows 8 Pro where I but I couldn't do that because in the catalog of Sources, I find "install.esd" not "install.wim" how the server or service request, with the cd of Windows 7 you can do, but you can't do that with windows 8 Pro I have buyed haved. I want to try to do this with Windows 8 Pro cd on the network because I have 3 pc at home with Windows 8 Pro and I wanted to try out the service deployment with windows 8 when I need to install pc so I prefer to install it on the network not on cd or etc. P.S. for all PCs with windows 8 pro I have buyed them, I have license key and etc.

  I use the 32-bit version of Windows Server 2008 in thw.

  Hello

  You can view this issue in this help link:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  It will be useful.

• Cannot use RDP with Windows server 2008

  Original title: a user cannot RDP

  Hello

  I have a windows 2008 R2 server with 5 licenses of Terminal Server. I set it up so that users can RDP to the server using RDP and access other machines via VNC, it's not connetced to a domain or whatever it is.
  All users can connect using any OS - Win XP, Win 7, but a user cannot get to their place of work - I can connect from home, of Germany, etc. using the same user name and password, but they can get on the server but their access is denied.
  They can telnet to the IP address but can't.
   

  Hello

  Thanks for posting the question in the Microsoft Community!

   

  You have any question using RDP with Windows server 2008.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

   

  If you need any other assistance, let us know and we would be happy to help you.

• FoxPro9 is compatible with Windows Server 2008 R2 as operating system?

  FoxPro9 is compatible with Windows Server 2008 R2 as operating system?

  Try the FoxPro Forum

  http://social.msdn.Microsoft.com/forums/en-us/home?Forum=visualfoxprogeneral

  Don

• USB-cable series compatible with Windows Server 2008?

  Does anyone know if / what USB to serial cable drivers are compatible with Windows Server 2008?

  Hi CeeJayBrown,

  If the information provided by wb2001 don't help you, then you can your question republish Windows Server forums for assistance.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Oracle Database 11g - with Windows Server 2008 R2

  Hi all respected gurus!
  
  Recently I downloaded the Oracle 11 g - R2 database.
  
  Will it work with Windows Server 2008 R2?
  
  Please guid of the GEM.
  
  Thanks in advance.
  
  Mohammed Uzair
  Oracle applications developer
  Oracle APEX developer
  Pakistan
  + 92 (333) 7058754

  Yes, it does not work.

  What are the results when you do?

• Problems to use Windows Server 2008 R2 64-bit on ESX 3.5 U3

  I am having some problems with Windows Server 2008 R2.

  I was charged with the creation of 2 new Windows Server 2008 R2 servers. We have ESX 3.5 Update3. I found that in my attempts to put an address static IP in the virtual machine, the system crashes. If I leave the adapter to DHCP, it seems to work longer, but this obviously doesn't work. Just to be in the IP menu type in IP (do not hit OK or apply again) will cause the console screen lock.

  I found that since the release of ESX 3.5 U4 notes:

  x 64 versions of Windows Vista and Windows Server 2008 operating systems require Microsoft hotfix

  x 64 versions of Windows Vista and Windows Server 2008 without Microsoft hotfix http://support.microsoft.com/kb/950772 operating systems have a situation where the guest operating system is not responding and returns the following error:

  MONITOR of PANIC: vcpu-3: SAY vmcore/vmm/cpu/segment.c:430

  I was not able to find the error code in my ESX systems, so I can't confirm that I see the same question. I moved the virtual machine of 4 different hosts in the same cluster with the same results.

  Here are the best true - I built the virtual machine from scratch and configured 2 GB RAM, 1vCPU and 40 GB slim HDD put into service. With no OS, I cloned this config for the 2nd of 2 servers that I need to install. I traced the two VM 2008 R2 ISO we have on our Image data store. Both installed at the same time. Given their Unique IP and Machine names and joined them in the field. Once that ended, I migrated my cluster Corp Server2 to my cluster off site for DR purposes. The only change in config is the VLAN on the remote cluster.

  The two systems worked very well. As I returned to server 1 to start install application - lock. Reboot, login and lock. This is where I started to move the virtual machine to other hosts of the local cluster. I have found no point in troubleshooting, I'll just clone server 2. I deleted the name of the Server1 computer. Off of Server2, cloned it more to the local cluster. I then started without the NIC on so I could change the name of the computer, IP and add to the domain. This seemed to go well, I have been brought back online and start installing the application. Until I'm at the point of launch the installer app - lock.

  2 on the remote cluster server works smoothly. I have validated the ESX host on all host versions to make sure I was in the same field of play on both sides - check. No other Server 2008 seems to have this problem.

  I will delete and rebuild 1 server from scratch, but I don't see how I can do a clean install of ISO any different for the same hardware and best results.

  I checked the link to the fix for MS, but article reference Server 2003...

  Is there something that I am on?

  Addendum:-I find it strange that although I have 2008 R2 installed, the drop down menu to comments what OS in VM config allows only to 2008 (64-bit) for the selection nearest you. If you look at the field Server guest operating system in a nutshell, it says that NT 4.0 is installed. Is this just a problem of display text with this version, or a cause for concern? I found everything all the R2 are displayed as NT4 in the Summary tab.

  Corrections - it seems Server2 locks as well at the opening of the Server Manager window - I can see the "collection of data...» "downstairs. I had also opened the work center & gt; Properties window on top of the Server Manager window. VM has ceased.

  Addendum - I found that R2 the boot safe mode with networking to adjust the TCP/IP offload to disabled results in a locked VM when in network properties.

  2008 R2 is not on the official list of guests supported, and others have reported problems with it as well.

  -KjB

  VMware vExpert

  Don't forget to leave some points for messages useful/correct.

• Satellite A505-S6004 - unknown device on Windows Server 2008 R2 64 bit

  I'm trying to install Windows Server 2008 R2 64-bit on an A505-S6004 (initially Windows 7 Home Premium) to a new disk. After downloading and installing many drivers for Windows 7 and install Toshiba Web site, I have two things left in the device manager that I don't know what to do for them.
  The info is under another devices basic device PCI System Bus 3, device 0, Function1 and..., function2.

  Any ideas what this can be?

  Thank you for your comments!

  If you are looking for drivers or unknown devices anytime, once again, that could be useful:
  [How to identify an unknown device (e.g. LAN wireless module)? | http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=208721&]

• What is the hardware configuration recommended for 11 G R2 on Windows Server 2008 R2 64 bit

  We are about to move from 10 G to 11 G R2 R2. The platform provider supported for our application is Windows server 2008 R2 64-bit. I have to write a specification document to support my request for new material and I would like some guidance as to the recommended configuration. Environment development database server will have to host dev, test, and preliminary databases for a database of 10 GB. The production server will host only the production database.

  Any guidance appreciated.

  concerning

  Madre

  Hello

  It's all sorted out.

  concerning

  Madre

• I have this error 0 x 80070005 (access) denied when I activated my Windows server 2008 R2 64-bit

  I have this error 0 x 80070005 (access) denied when I activated my Windows server 2008 R2 64-bit. Here's the print for the activation screen. Your help is most appreciated. Thank you

  Hello Mika Wong,

  The question you have posted is related to Windows Server 2008 and would be better suited on the TechNet support forum. I suggest post you the question on the TechNet support forum for more information.

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

• How to create DSN on Windows Server 2008 R2 64 bit 32 bit

  I've created System DSN using the SQL Native Client ODBC DSN name does not invite to the screen of the database option during the installation of the VMware Update Manager utility in vCenter Server 4.1

  vCenter server 4.1 is irunning on Windows Server 2008 R2 64-bit in which SQL Server 2008 R2 is installed.

  Please help how can create 32-bit DSN for VMware Update Manager. Screenshots are attached to the post for referance.

  glance. http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1010401

• How to remove the version of WIndows Server 2008 R2 180 days?

  My version of the above is outdated now, and I want to remove it from my system. I am running a triple-boot of installation, including Windows 7 Ultimate 64 bit, Windows Server 2008 R2 and Ubuntu. I want to remove the server completely, including in the list of startup options. I don't know how to proceed.

  Any advice will be greatly appreciated.
  Arthur

  Hi, Arthur.

  Try the following:

  Uninstalling SQL Server 2008 R2 evaluation edition

  http://SQLBlog.com/blogs/aaron_bertrand/archive/2010/10/25/fun-with-software-uninstalling-SQL-Server-2008-R2-Evaluation-Edition.aspx

  http://TechNet.Microsoft.com/en-us/magazine/gg491398.aspx

  The TechNet forum is available here

  http://social.technet.Microsoft.com/forums/en-us/categories/