ACS v5.3 patch problem 5-3-0-40-2

Similar Questions

• Cisco ACS 5.3 patch 8 Volume OPT

  Hello

  We currently have 12 ACS unit with one of them being a dedicated newspaper collector. We have authentication of 802. 1 x configured for network and Wi - Fi ports. We are authenticating desktop, laptops, smart phones, etc. on our network.

  The problem we have is the volume of the OPT exceeding 30% volume size recommended by Cisco TAC after a few months. We have recently added more resources on our network (fusion). We are now on the size of 30% in about 1 month.

  In the past, we called Cisco TAC when we had problems with performance Log Collector. It's time was also authenticate clients 802.1 x. We have added a new device and is a dedicated Log Collector. They would check the volume of the OPT and to find that it was about 70% use the size. They launch the Console Root patch and delete the DB and then re-create. We did about 2 times before starting to monitor the size of the volume OPT.

  This last time, we ran in the 30% the size of volume more rapid then we had previously. I got a Cisco TAC volume of the OPT to delete and recreate it.

  Cisco TAC recommended that we reduce the amount of logs that are sent to the collector of the newspaper. We are currently investigating this option.

  The questions I have is:

  What percentage of size for the volume of the OPT should be concerned until it starts impacting on the performance of the Log Collector?

  Is there another thing we can do to reduce the amount of logs that are sent to the Log Collector?

  We have data purge set to 30 days. We are complete and incremental database backups. We also have local send logs to a Syslog server.

  We test them make changes to send only AAA Audit logs and statistics system of Log Collector.

  Thank you

  In the distributed configuration, its recommended to set up a secondary server dedicated as a collector of newspaper. However you have a large deployment, so I'm sure that authentication rate would be too high causing Dungeon size view-basic data on the increase.

  In order to avoid running out of disk space, we need to manage. This means identifying the files that are created and written by processes on the system, allocate a budget to space them as if the files remain in their budget all the services can be supported without interruption, then define and implement the necessary facilities so that these files in their budget.

  There are two mechanisms to reduce this size and prevent it from exceeding the maximum limit.

  1. air scan: this mechanism the data will be purged based on the retention period of data configured or arriving at the upper limit of the database.  In Patch 6 new provided option to demand purging as well.

  2. compress: this mechanism frees up unused space in the database without deleting all records. Before the compress option can only be performed manually.  GBA 5.3 Patch 6 there are improvements so it will automatically work every day at a preset time, when specific criteria are met.

  What percentage of size for the volume of the OPT should be concerned until it starts impacting on the performance of the Log Collector?

  The TAC recommendations are right. You will be able to use all the ACS function if / opt is less than 30%.

  Is there another thing we can do to reduce the amount of logs that are sent to the Log Collector?

  It seems that you use most of the features/mechanisms to have / low opt. However, you may be interested to read more about scrub data and data compression improvements http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.4/release/notes/acs_54_rn.html

  S ' Please use System Administration > Configuration > journal Configuration > Logging categories > Global to configure only the logs required the sending to the ACS View log-collector.

  -Provide the cool screenshot of the page Configuration Monitoring > System Operations > Data Management > removal and backup.

  -With the below listed command you can check real and physical terrain database size

  ACS-config

  Username: acsadmin

  Password: *.

  acsview show-dbsize

  There are some known defects on the same subject. However, the version you use improves database management process.

  CSCto47203: ACS 5 runs out of disk space

  CSCua51804: see backup fails even when there is disk space

  Jatin kone

  -Does the rate of useful messages-

• ACS Appliance Agent remote problem

  Hello

  We have depending you on the situation:

  -2 x ACS SE

  -2 x ACS Agents on member servers remotely

  -2 x ASA

  We would like to authenticate the VPN users connecting to the ASA via the ACS and active directory.

  I have configured the remote agent following this link:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/3.3/installation/guide/remote_agent/Rawi.html#wp289426

  But we are not able to pick up groups active directory to the AEC gui--> user external database > database group mappings > Active Directory > new Configuration.

  On the domain controller, we get the error ID 1030 and 1058, someone had these problems too?

  Thanks in advance and best regards

  Dominic

  Most likely, this is a Permission problem. What OS and SP you use.

  Have you tried to run the remote agent by using the LOCAL account instead of the service account that you created?

  Kind regards

  ~ JG

  Note the useful messages

• ACS 5.0 Patches

  Hi all

  are there patches available for the ACS 5.0 system 90-day eval?

  I am to evaluate ACS on vmware platform.

  The patch 5-0-0-21 - 6.tar.tar doesn't seem to be a valid file to do so.

  The Readme a .gpg file but the patch that I downloaded is a .tar gall and it is impossible to unpack it.

  I renamed the file and it worked for me, rename it to. tar.tar to. tar.gpg. The issue I had was that the fichier.6 was not working, I installed very well eu.5.

• ACS v 4.1 problem

  Dear all,

  We had faced a problem in our ACS Server 4.1, she refused connections user 15 minutes and we were not able to authenticate through our GANYMEDE username and password in this market. After 15 minutes the things became normal

  Below are the logs generated by the server during this period.

  ==========================================================================================

  Fri 15 Oct 17:02:24 2010): Info: size GetApplNICConfig GetIfTable = 11192
  (Fri Oct 15 17:02:24 2010): Info: GetApplNICConfig, ptba Idx = 16777220, en adpt Idx = 16777219
  (Fri Oct 15 17:02:24 2010): Info: GetApplNICConfig, ptba Idx = 16777219, en adpt Idx = 16777219
  (Fri Oct 15 17:02:24 2010): Info: ip GetApplNICConfig < ip="" address=""> , mask 255.255.255.240, bridge < ip="" address=""> ,.
  (Fri Oct 15 17:09 2010): try to get the name of the current administrator...
  (Fri Oct 15 17:09:01 2010): audit administrator: admin...
  (Fri Oct 15 17:09:01 2010): administrator admin found
  (Fri Oct 15 17:09:01 2010): try to get the name of the current administrator...
  (Fri Oct 15 17:09:01 2010): audit administrator: admin...
  (Fri Oct 15 17:09:01 2010): administrator admin found
  (Fri Oct 15 17:19:54 2010): try to get the name of the current administrator...
  (Fri Oct 15 17:19:54 2010): audit administrator: admin...
  (Fri Oct 15 17:19:54 2010): administrator admin found
  (Fri Oct 15 17:19:54 2010): try to get the name of the current administrator...
  (Fri Oct 15 17:19:54 2010): audit administrator: admin...
  (Fri Oct 15 17:19:54 2010): administrator admin found

  ===========================================================================================

  Kind regards

  Ranjit

  As I wrote before:

  I leave the LogLevel to FULL and monitor the ACS so that if it happens again, you can collect the package.cab immediately after the problem occurs, and the necessary papers will be there.

  HTH,
  Tiago

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• ACS 5.2 patch 5-2-0-26 - 2.tar.gpg

  Hi all

  Anyone successfully installs patch 5-2-0-26 - 2.tar.gpg 5.2 GBA? After downloading the patch of my deposit of tftp I got the error message:

  ACS patch install 5-2-0-26 - 2.tar.gpg repository tftp
  chmod: cannot access at the "* .sh ': no such file or directory".
  Patch not valid 5-2-0-26-2.tar.gpg'-missing install.sh
  % Error: failed to open / validate the patch

  I tried to download the patch on Cisco's Web site twice with the same result. I also tried patch 5-2-0-26 - 1.tar.gpg does not. It seems to be no mistake on the site of the tftp server (I use 3CDaemon).

  Thank you very much for your answer.

  Yours sincerely,

  Zdenek Rottenberg

  Yes, I installed the Update Rollup 2 without error but I'm not using TFTP FTP with anonymous, have you tried to download the file with a TFTP client, this is the first time use you TFTP to ACS?

• Compatibility of Windows 8 and ACS ACR122u NFC player problem

  Compatibility issues with NFC ACR122u ACS player when running on Window8.  Application well on XP, Win7, vista work.

  I guess ACS must release a driver with an update of Windows8.
  If anyone has experienced the same problem relate to please.

  Hi Virginia,

  1. what exactly is the problem with the NFC reader?

  2. that you get an error message when you use the player?

  It seems that ACR122U NFC reader is compatible with Windows 8, and there are drivers for the device.

  For more information, see the links.

  http://www.ACS.com.hk/index.php?PID=product&ID=ACR122U

  http://www.ACS.com.hk/index.php?PID=drivers&ID=ACR122U

  For compatibility issues, see the link.

  Make the programs more compatible with this version of Windows

  You can also contact Technical Support ACS and check.

  Let us know the results. We will be happy to help you further.

• Installation of Adobe Acrobat Pro XI on PC Windows 10 - Patch problem

  Hello

  A quick check of my Adobe account reveals that I purchased Abobe Acrobat IX (9) Pro in 2010, and then either purchased or upgraded to XI (11) Pro level in 2013.  These were installed on a PC running Windows 7.  I recently bought a PC running Windows 10 / 64-bit and want to reinstall Pro XI.  I did a fresh download of the installer Pro XI.  However, when I tried to install it, I get an error message saying "this patch package could not be opened.  Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package. "Can someone help me solve this?  Some things to note:

  • I'm not sure if the XI (11) Pro in 2013 was a completely new software package or just an upgrade of the IX (9) Pro software.  If the latter, I should install IX (9) first Pro?
  • I am currently using the Microsoft Edge browser that comes with the PC running Windows 10.  I don't know if it meets the conditions for the installation of XI (11) Pro https://helpx.adobe.com/acrobat/kb/system-requirements-acrobat-family-products.html.

  Thank you

  Unfortunately, it did not work.  I opted for a subscription to Adobe Acrobat Pro DC which has installed without any problem and seems to work correctly.

• Patch problem

  Hello

  Env:

  Oracle 10 g 2 10.2.0.5

  OEL 5.8 32-bit

  I have an existing server where I get this result for "lsinventory":

  -output-

  lsinventory opatch $
  Citing O Patch 10.2 .0.5.1

  Setup Oracle interim Patch version 10.2.0.5.1
  Copyright (c) 2010, Oracle Corporation.  All rights reserved.

  
  Oracle home: /app/oracle/product/10.2.0/asm
  Inventory Center: / app/oracle/oraInventory
  from: /etc/oraInst.loc
  OPatch version: 10.2.0.5.1
  YES version: 10.2.0.5.0
  YES location: /app/oracle/product/10.2.0/asm/oui
  Location of the log file: /app/oracle/product/10.2.0/asm/cfgtoollogs/opatch/opatch2013-07-03_11-13-49AM.log

  History of patch file: /app/oracle/product/10.2.0/asm/cfgtoollogs/opatch/opatch_history.txt

  Location of the output file Lsinventory: /app/oracle/product/10.2.0/asm/cfgtoollogs/opatch/lsinv/lsinventory2013-07-03_11-13-49AM.txt

  --------------------------------------------------------------------------------
  Installed products of higher level (2):

  Oracle Database 10g 10.2.0.1.0
  Oracle Database 10g Release 2 Patch Set 4 10.2.0.5.0
  There are 2 products in this House of Oracle.

  
  Interim plates (2):

  Patch 14269955 : apply the sea Sep 19 11:43:16 EDT 2012
  Patch ID: 15334435
  Created August 1, 2012, 02:14:36 hrs PST8PDT
  Bugs fixed:
  14269955
  This overlays of patch patches:
  13923855
  This patch needs fixes:
  13923855
  as prerequisites

  Patch 13923855 : apply the sea Sep 19 11:35:10 EDT 2012
  Patch ID: 15054672
  Created June 21, 2012, 20:30:59 pm PST8PDT
  Bugs fixed:
  8865718, 11790175, 13489660, 9020537, 9772888, 8650138, 8664189, 10091698
  10092858, 12551710, 7519406, 13349665, 8771916, 7509714, 8822531
  10139235, 10159846, 13257247, 8350262, 11792865, 7119382, 13632738
  11724962, 8966823, 9320130, 11674645, 7026523, 9399589, 9672816, 13503598
  9499302, 9150282, 9448311, 9659614, 13632743, 9949948, 10327179, 8882576
  7612454, 7111619, 9711859, 9714832, 9735237, 9952230, 12780098, 8660422
  11066597, 14105702, 9713537, 14105703, 14105704, 13737773, 13737775
  12925532, 12748240, 9694101, 12862186, 12862187, 10249537, 9586877
  8211733, 6694396, 9548269, 7115910, 7710224, 9337325, 8354642, 7602341
  14076510, 10157402, 12565867, 6402302, 10327190, 10269717, 11693109
  10017048, 8546356, 8394351, 9024850, 8224558, 9770451, 9360157, 8488233
  9109487, 10132870, 9171933, 10173237, 9532911, 10068982, 10306945
  7361418, 11725006, 8666117, 6157713, 9184754, 10214450, 8544696, 9767674
  9323583, 8277300, 9726739, 13343467, 8412426, 10326338, 10165083
  6651220, 12419392, 10208905, 9145204, 13554409, 11076894, 7450366
  11893577, 8970313, 6011045, 10162036, 11814891, 10248542, 9469117
  13359623, 9952270, 13343471, 9842573, 10324526, 12419258, 9322219
  8636407, 10010310, 12828105, 9689310, 9390484, 13736501, 13736502
  9824435, 13736503, 13736504, 13736505, 13736506, 9963497, 9032322
  13736507, 12551700, 12551701, 12551702, 11858315, 12551703, 12551704
  12551705, 10076669, 12551706, 14040433, 12551707, 6076890, 9308296
  12551708, 13916709, 12827745, 12880299, 14038805, 13923855, 8528171
  9072105, 11737047

  -output - end

  I have to prepare a new server with the exact same binary. So I downloaded 14269955 and 13923855.

  README file of 14269955 said that patch 13343471 must be installed/applied before applying IT.

  Now, here's the problem. If I apply 13343471, then 14269955 and 13923855, the installation of the hotfix for 13923855 gives me error that:

  
  Interim Patch 13923855 is a superset of the patch [13343471]

  If I apply 13923855 and then try to apply the 14269955, I get this error:

  Patches required [13343471] patch "14269955" are not present at Oracle.

  …

  OPatch failed with the error code 74

  
  UPDATE:

  If I try to apply [13343471], I get the following error:

  Interim patch 13343471 is a subset of the patches [13923855] in < oracle home >

  All the patches of this patch 13343471 are already present in the House of the Oracle, no need to apply this hotfix.

  So, how do you "14269955" "" patch now? I'm stuck!

  Please advise! It is urgent please.

  Best regards

  Post edited by: user130038

  If you plan to create a new (empty) databases on the target, then put on the patterns selected from the source using expdp/impdp, then the binary ORACLE_HOME on the source and the target does not match at all :-)

  Srini

• 11.1.0.7 patch problem

  Hello
  
  maybe it's a little different problem, but I have problems to find a patch for Oracle 11 g (patch 11.1. 0.7). I can't find it on Metalink, because I can't find his number. Can someone help me?
  
  Thanks in advance
  Sousou

  6890831 group of patches, it's what you're looking for.

• MainStage new patch problem

  Hi, since a few weeks now, when I try to load a new sound in a new patch that I just created in a new channel strip, the noise will not play. MIDI signal is good, but the yellow line in the space of work, which usually show the range of each channel for the patch band, does not appear and there is no sound.

  Can anyone help please? Thank you very much!

  Below the workspace, you will find the Instrument channel strip selector. It has a few tabs: Chanel band library, attributes, layer Editor, input MIDI.

  Select the MIDI input tab and select the entry, which is 'Keyboard 1' in most cases.

  Now select the layer Editor. Here you can set the highest and the key, which defines the scope of the yellow band across the keyboard in the workspace. Set the score the highest of the G8 and the lowest at C - 2 to make sure lunch is the channel strip.

  Hope this helps,

  DaCaptain

• 3.3 ACS ACS 4.0 update problems

  I have a Cisco ACS 3.3 running on a win2k platform server and I need to upgrade to ACS4.0 on win2k.

  -3.3 backup and restoring files on web interface 4.0 does not work;

  -the same operation using csutils.exe works not (csutil b [...], then csutil - r [...])

  -J' installed the new machine with ACS3.3, I imported the data/group/user with csutil, then I installed ACS 4.0 using setup.exe. The result is that the ACS services will not start

  Any idea?

  THX a lot.

  Good to hear that :)

  If the post helped you, please note, he encourages me.

  Kind regards

  Prem

  :)

• Tools patch problems, do not have the option on my screen to choose the source or destination

  my content aware patch tool has stopped working.  I don't have the option on my screen to choose the source or destination.  I know I did something to her but I don't know what.  any ideas how I can make it work again?  Thank you.

  Hi rojas66,

  Greetings.

  • Make sure you have selected "normal."

  

  • If this does not work, let us know what changes made since the last time it worked.

  Concerning

  Rohit

• Problems with patching: ACS 5.0 to 5.1 upgrade

  I'm following the instructions to upgrade ACS 5.0 to 5.1

  But I can't get past the first step:

  Step 1 Install the ACS 5.0 patch:

  Issue the following command from the patch CSA in EXEC mode to install the fix for the ACS:

  Install patch ACS patch-name. tar.GPG repository repository-name

  Here is my result:

  / Admin # acs patch install repository 5-0-0-21 - 9.tar.gpg mytftp
  chmod: cannot access at the "* .sh ': no such file or directory".
  Error: Could not open the patch 5-0-0-21 - 9.tar.gpg

  It download the patch via TFTP ok, but cannot install it.

  Can anyone help?

  Thank you

  There are problems in 5.0 with using tftp for file transfers that exceed 32 MB. There may be problems with the ftp servers that exceed this limit.

  I recommend to start using the alternative repository type. For example, ftp or a local repository on the server.

• Question 5.1 Patch 4 ACS

  OK, maybe a stupid question... when I download the patch on the Cisco site, it indicates that it is a. GPG file, however, once the download complete it appears as one. TAR. TAR file... am I supposed to rename it? Or am I wanted to unzip somehow, unpack everything utility I try says that the file contains no archives or is incomplete or corrupted!

  If there is a document that details how to install patches please someone could post the link.

  Hi Paul,.

  It is a browser problem. You must rename the file with the extension .gpg (the original name of the patch file) for a successful installation of patch later. In other words, the installation will fail if you leave the patch name with the. tar.tar extension.

  As for your question on how to install the patch, it's in the Readme of the patch that you would see a link to "Readme for ACS download the patch file itself. "Here is the link to the Readme for 5.1.0.44.4 update rollup. Click this link to open the readme file before you click on the "Go ahead with Download" button to download the patch file.

  Here is the Readme for patch 5.1 ACS 4.

  http://www.Cisco.com/Web/software/282766937/28141/ACS-5-1-0-44-4-Readme...

  Kind regards

  Cam.