Action Center to send Message day after day

Dear community

I noticed, that for a few days, I kept getting a message from the center of the action, my updates switch is turned off and I need to turn it on.

It didn't today, that I have now moved the center of the Action of the taskbar.

I would like to know what would cause this.

I would say, I have a few tools 10-bit, I need to uninstall.

No stress, but I would like to know why.

Hello Jeffrey,.

Thanks for posting your question on the forum of the Microsoft community.

I would like to know some information about the problem so that we can help you better.

1. what happens when you try to change the settings for Windows Update? You receive an error message?
2 don't you back up your files regularly?

I would suggest trying the following methods and check if it helps.

Method 1:
You can try to Change Action Center settings and check the issue.
Refer to this article:
How is the Action Center research problems?
http://Windows.Microsoft.com/en-us/Windows7/how-does-Action-Center-check-for-problems

If this does not help, then use method 2.

Method 2:
I suggest you to use security scanner Microsoft to check if the problem is caused by a virus or malware.
Reference:
Microsoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx

Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

Additional information:
What is the center of the Action?
http://Windows.Microsoft.com/en-us/Windows7/what-is-action-center

I hope this information helps.

Please let us know if you need more help.

Thank you

Tags: Windows

Similar Questions

  • Cannot send messages just after the update on Nov.18

    I have no details. It happened just after the Thunderbird updated automatically from the internet on Nov.18 (Fri) JST. After writing an e-mail, press send below, the softeare confirming the address and receiver, then is NOTHING PAST. Just to return to the window of e-mail must be sent.

    I suspect you updatd to 45.5.0?

    Could be caused by lightning. Look at the tools | addons | Look for the updates.

    Please tell us, is the latest version?

    If that fails, what happens if you run Thunderbird in safe mode?

  • Action Center does not detect Avast Anti-virus after system restore

    I had to do a system restore to a point a few days earlier due to some bad drivers.  After you get things restored, I found that the Action Center are most recognized Avast (free version) as my anti-virus software.  It is fully updated and running and work very well.  I tried several suggestions available online, including suggestions on the avast website to check the consistency of the standard WMI (https://support.avast.com/index.php?_m=knowledgebase&_a=viewarticle&kbarticleid=580&nav=0, 1.20). I also checked that there isn't an underlying virus and tried to 'fix' the installation of Avast in the menu programs and features, as well as a few reboots.  Nothing has worked. This PC is only about two weeks, and everything worked well until the bad drivers and system restore.

    I came here as a last resort...  Any help is appreciated.

    Don't know if this will work for you, but last night I ran a scan with Avast and this morning that action Center of the window said Avast was running but according to Avast started it was running.  Then I disabled the Avast shields then turned on their return and Action Center were more like Avast is not running

  • Warnings from Windows 8 Action Center that McAfee and the Defender is not activated after Windows update.

    In December 2012 after installation of the updates of Microsoft Windows on my machine Windows 8 and rebooting, my icon downtown Action system gave 3 warning messages:

    The spyware, antivirus and Firewall wasn't turned on do not.

    When I was in the center of the Action, he said time Windows Defender and McAfee have been disabled.

    I ran Mcafee checks as well as the defender and it states that my machine is virus-free.

    I clicked on Mcafee and it said all were lit.

    I called Mcafee technical support and they did something in December 2012 and has solved the problem and none of the messages is new. They do not just turn off messages in December 2012, they did something, but wouldn't discuss what has been done with me.

    However, today, Jan 8/13, another set of Windows updates have been installed by Microsoft and yet once again, the WARNING messages 3 came.

    I called McAfee support again and said that I didn't call each month when I install the updates of Windows to solve the problem and that there is a bug with Windows 8 and McAfee.

    I looked at the tech of McAfee as he did helpline (I work in technical support as well) and what he did this time was to turn off Action Center messages, thinking that I DINA realize that it was not really solved the problem.

    I told him, I understand that it seems that McAfee is not working properly, but I will not renew my McAfee Dell subscription this March/13 because that doesn't solve anything... it's just disable the warning messages. (I showed her that if I turn on the message, the warnings were still there... apparently he was shocked that I knew what I was doing).

    He said that McAfee is a problem with Windows 8 and McAfee and are working on a fix.

    The tech told me to get in touch with Dell and they would provide a fix.

    This problem does not occur with my Alienware Windows 7 pc and installation of Windows 8 I received is on my other pc from Dell.

    Is someone can you please tell me if there is a fix for this?

    I will not renew my McAfee subscription if it comes to the type of service that will be provided; I'll go with another antivirus program.

    Thank you


  • WINDOWS 8 Action Center reports off firewall/anti-virus/antispyware, McAfee says that all are turned on and running. Can not get the corrected message.

    WINDOWS 8 Action Center reports off firewall/anti-virus/antispyware, McAfee says that all are turned on and running.  I tried to turn it on through the Action Center, but nothing happens.

    Thanks for the reply.  I appreciated the recommendation run malwarebytes because it gave me peace of mind knowing that he found nothing.  The error of origin correct auto in the last two days seemed so it was an update from Microsoft or a McAfee update that has straightened things.  Thank you once again.

  • Unable to send messages after the accident, the solutions proposed did not.

    Tuesday (April 7), there was an update to 31.6. Thursday, there was an accident. Since that time cannot send messages. The proposed solutions did not work.

    I get the message that the SMTP server does not support the selected authentication.
    I tried the solution mentioned. But nothing helped. I configured the server out on the different types and remove the password as shown. After that, I did the configuration with different types of Setup again. No solution.
    There is not a possibility of webmail. So I'm stuck now.

    There is no problem with incoming messages, they come. This password should be deleted also?

    Any help would be greatly appreciated.

    Greetings,
    AZ58.

    Good. You can then mark the thread as "Solved" Please?
    Thank you.

  • Cannot open the message of solution in the Action Center in windows 7

    I got the solution in the windows 7 Action Center, but I can't open it. I don't know that my internet connection is good. How can I get the message of solution? Thank you.

    Same here, but I can have a work around.  Had a Windows 7 BSOD twice in a week.  Both times the Windows Action Center reported that he had a solution, but when I clicked on the link to view the solution, the Details of the Message screen says he was unable to download the solution and told me to check my Internet connection.  Clearly not the problem.  I clicked on the link "see all the problems that this applies".  Check-video equipment 2 errors and the other "stop unexpectedly" (BSOD).  Workaround: in an event random dumb luck, I clicked on the back arrow at the top of the Action Center to return to the display of the details of the Message, and as if by magic, instead of the same message on checking my Internet connection, it displays the solution!  Now, don't get excited too - the proposed '' solution '' is not really a solution for the BSOD or apparent problem with the NVIDIA graphics card.  Here you go:

    A problem with the NVIDIA graphics driver

    NVIDIA Graphics Driver has stopped working properly.

    An update of the driver, as appropriate, could prevent this problem does not happen.

    There are several ways to find and install the driver updates, but it's best to let Windows do it for you. Try the step below, which describes the process. If it does not produce a driver update that resolves the problem, try the remaining steps in the order shown.

    1. Look for the optional third-party updates

      Even if all the critical updates have been installed on your computer, the optional updates may be available for NVIDIA Graphics Driver, who have not yet installed. Here is how to use Windows Update to find and install the updates driver option:

      1. Click here to open Windows Update in Control Panel

      2. In the left pane, click check for updates to see if there are any optional updates available for your computer.

      3. If the optional updates are available, click the link to view and select the updates to install. (If you don't see this link, you may need to clickSearch online for updates from Microsoft Update).

        If no optional updates are available, go to step 2.

      4. Select the optional updates, you want to install (especially if they seem to be related graphics), clickOK, and then click install updates.

    2. Try to manually update the NVIDIA Graphics Driver

      If no optional NVIDIA Graphics Driver update was available in Windows Update, you can try the NVIDIA Graphics Driver update manually.

      Note
      It's best to let Windows automatically installs the drivers for your hardware, as described in step 1 above.

      If you decide to manually update the NVIDIA graphics driver, here's how:

      1. Click here to open the Device Manager if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

      2. In Device Manager, double-click display adapters, and then double-click the name of the NVIDIA Graphics Driver device running.

      3. Click driver , and then click set to update driver.

  • When asked how you want to search for driver software, click search automatically for updated driver.

  • Windows locate and install a new driver, if available.

  • See the NVIDIA Corporation Web site for driver updates

    If no optional NVIDIA Graphics Driver update was available in Windows Update, go online to the following site to check for driver updates:

    Click here to go to find out if a solution or an updated version is available online on the website of NVIDIA Corporation

  • How to upgrade manually a pilot using a file downloaded

    1. Click here to open the Device Manager

    2. In Device Manager, locate the device you want to update, and then double-click the device name.

    3. Click driver , and then click set to update driver.

    4. Click Browse my computer for driver software.

    5. Click on the Browse button and look for the folder that you saved on your desktop.

    6. Select the folder that contains the driver files.

    7. Click OK, and then click Next.

    8. Follow the instructions to complete the driver installation.

    Note
    If you run the latest version of the NVIDIA graphics driver and you still experience the problem, we recommend that you contact NVIDIA Corporation or by the manufacturer for support, and additional information.

  • Visit the Web site of the manufacturer of your computer for driver updates

    If NVIDIA Graphics Driver was preinstalled on your computer, check the Web site of the manufacturer of your computer for driver updates.

    How can I find the manufacturer of my computer?

    Click on the Start button , typemsinfo32 in the start search box and press ENTER. The manufacturer of your computer is listed as themanufacturer of the system in the right pane of the system information window.

    Click here to go online to see the contact information for most of the computer manufacturers

    How to upgrade manually a pilot using a file downloaded

    1. Click here to open the Device Manager

    2. In Device Manager, locate the device you want to update, and then double-click the device name.

    3. Click driver , and then click set to update driver.

    4. Click Browse my computer for driver software.

    5. Click on the Browse button and look for the folder that you saved on your desktop.

    6. Select the folder that contains the driver files.

    7. Click OK, and then click Next.

    8. Follow the instructions to complete the driver installation.

  • What is a driver?

    A driver is software that allows your computer to communicate with hardware or devices. Without drivers, the hardware you connect to your computer (for example, a video card or a webcam) may not work properly.

  • What should I do if my computer Action Center message says: "your Intel Graphics Driver has stopped working twice?

    My computer message of the Action Center said: "your Intel Graphics Driver has stopped working twice?

    What should I do to solve the problem?

    Hello AletBotes
    Try to uninstall the old version of the graphics driver Intel or by reinstalling fix it. It is always best to update the drivers to the latest version you can find on the website of the manufacturer of the computer. If you have no problem with the video/graphics and if the Action Center message bothers you in any way, you can turn it off in goin to this place the Center Items\Action Panel\All Control Panel control and then in the left pane click on change Action Center settings > uncheck the required Notification or uncheck everything. Click OK. That's all.

  • After backup of Windows 7 Action Center indicates error 0 x 80070002

    I use Windows 7 Home premium version.

    When the scheduled backup is complete, the Action Center say that some cells have been ignored, and the path is "Backup has encountered a problem during backup of the C:\Windows\System32\config\systemprofile\Podcasts file. Error: (the system cannot find the specified file. (0 x 80070002)) ».

    How can I make sure that I don't GE this message

    Error message when you try to restore from a backup complete a Windows Vista-based computer: "the system cannot find the specified file. (0 x 80070002) »
    http://support.Microsoft.com/kb/951002/en-us

    0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7
    http://support.Microsoft.com/kb/979281/en-us Note: for senario #2 you must set Windows Explorer Tools/View tab:

    (1) show hidden files, folders or drives
    (2) remove the checkbox «Hide empty drives...» «, «Hide extentions...» "and"Hide protected operating system..." ».
    3) click on "Apply to folders", then click "OK" to exit.
    Normally the 'Contacts' and 'Research' folders are created during the installation process of Windows before setting the time zone option. The "AppData" folder is re-created when the Windows Vista to Windows 7 upgrade process.

    Also: Win7 Backup - error. (0 x 80070002) - cannot find the file specified.
    http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/bff71aac-c78e-42bd-A959-116019c93478

    J W Stuart: http://www.pagestart.com

  • How to restore Win7 backup on the new system and drive Action Center repair after disk crash

    I have a Dell which took a 64-bit disk crash.

    I created there is not long from the center of the Action, a disk repair and backup of the C: drive on a backup USB 1 TB drive.  These two events has been made by the Windows 7 Action Center.

    I have a new installation disk in the system to replace the one that crashed.

    Is it as simple restore system on the new drive that boot from the ERD and then recognizes the USB disk and backup file Action Center?

    My hypothesis is the combination of the ERD and backup Action Center will bring my system to date content calendar when they were created?

    Problems to watch?

    If your image is on a connected USB external drive, you may need to install a drive to the external hard drive in the installation process.  So you should find a driver for it and store it on a USB key so that you can install it when asked.

    Starting the system on the ERD is simple and still works.  Just press F12 at first then select the DVD drive and click Yes.

  • Internet access Messages Action Center

    Why Action Center shows no internet access, but I'm connected by ethernet?

    Thank you very much. I read the post. It turns out that this is not a driver problem. I think the problem is that my office has a wireless LAN card and an ethernet card. I am connected by ethernet. I had turned off the wireless LAN card, because I noticed that he was trying to connect. Well apparently for some reason any Windows detected it, and for some reason any thought I was not logged. Only the Microsoft Gods know why. Anyway, I enabled the adapter then I went back and he subsequently invalid and everything seems fine.

    In any case, thanks to pick me up in it.
  • The action center that says software potentially harmful detected

    Original title: error message of the action center

    I get a message in the center of the action that said potentially malicious programs detected - when I click on see details or fix, nothing happens

    Hi Sru,

    I appreciate the efforts that you put to publish the query on this forum.

    You did changes to the computer before this problem?

    This could be due to malicious software or viruses present on the computer.

    I suggest you analyze your computer Microsoft Safety Scanner, it will help us to get rid of viruses, spyware and other malicious software.

    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    Important: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    Please let us know about the results. We will be happy to help you come.

  • I tried to open Windows Media Center, but this message keeps popping up "you are connected as a guest. Windows Media Center requires a non-invite account. »

    I have problems with my account. I have a laptop with Windows 7 Home Premium, I tried to open Windows Media Center, but this message keeps popping up "you are connected as a guest. Windows Media Center requires a non-invite account. If you change your account type, contact the owner of this system. A similar message appears when I try to install the updates there are no other accounts on my computer and it still says I am admin.

    original title: ownership of account?

    Hello

    Have you made changes on the computer before this problem?

     
    It seems a problem with missing or damaged system files. I would suggest trying the following methods and check if it helps.
    Method 1:
    Let flow the Microsoft Safety Scanner and check if it helps.
    Microsoft security scanner: http://www.Microsoft.com/security/scanner/en-us/default.aspx
    Note: The Microsoft Safety Scanner ends 10 days after being downloaded. During these 10 days, it will remove all the files infected by the virus and records. I suggest you create a backup of your data, and then install Microsoft Safety Scanner.
     
    Method 2:
    Run the scan tool (SFC) System File Checker and check if it helps.
    How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista: http://support.Microsoft.com/kb/929833
     
    Method 3:
    Try to create a new user account and check if it helps.
    Create a user account: http://windows.microsoft.com/en-US/Windows-vista/Create-a-user-account  
    If the problem is resolved in the new user account, this means that the old user profile is damaged. Here is the link to repair a user account damaged: http://windows.microsoft.com/en-us/windows-vista/Fix-a-corrupted-user-profile
     
    Hope the information is useful.
  • False issues action Center

    Hey,.

    Currently my Windows Action Center shows my Virus Protection and firewall off which are both wrong. I have run Norton 2010 and it works very well. When I open the Action Center and click on ' turn on ' it opens Norton but does not remove the question of the Action Center.

    Everything is up-to-date and I didn't have this problem in the first place, so I'm prosuming there is a problem with a recent installation. I installed Adobe CS4 on a trial a couple of days, but after a reboot, the problem was not there. When I turned my system on last night, it appeared and I can't solve.

    Except that the only thing that I have installed are games, any help would be appreciated

    See you soon

    Graeme

    Aslong as my system is safe it's all I'm really worried, I was just trying to solve an irritating problem ;)

  • send messages to anroids

    I've recently updated to 10.0.02 and unable to send messages to users who have Android?  I have an iphone 5 c

    Hi Dina61,

    Thank you for using communities of Apple Support.

    I see that you have just upgraded to iOS 10.0.2, and you are unable to send messages to users who have Android phones. I guess certainly let that stop you to communicate with people, so I want to assure you that I help you get this problem is resolved.

    Please go to settings > Messages > Send as SMS. Make sure that it is switched on (green). If it is already on, turn off and turn on/off and then on again.

    Once you have done this, please test by sending a message to a user of Android and see if you get the same result.

    For more information, see: iMessage and SMS/MMS

    Have an amazing day!

Maybe you are looking for

  • How can I get rid of ArcadeParlor

    I have just recently began to receive dozens of advertising pop-ups/ads/videos whenever I try to use Mozilla Firefox. I found the program on my pc and was able to uninstall it. I can't understand how to avoid the overlay all. unique. thing. I. don't.

  • LapDock 100 w/Webtop 3.0, RazrMaxx and me

    As a new convert to my original Droid for the Maxx, I have really not the ins and outs like I did once. Not the time to really learn it. Now, I'm done accedently Hi bid on a 100 Lapdock and get a new toy. These things seem to be very buggy. I read th

  • HP Pavilion m7-11dx Windows 7 sensor on pass Simple does not

    I went and closed my lap top but do not put in mode "sleep" or stop it, I just pulled the top down. When I came back and lifted the top, I went to Simple passage, R clicked the icon of MS and when he came, he showed the following: "unrelated probe, s

  • I am receiving error Code:-5004: 0x80070002__

    I am recieveing error:Error code:-5004: 0 x 80070002Error information:> Setupdll \ setupdll.cpp (3085)PAPP: Ultima Online: 9th anniversary CollectionPVENDOR:EA games (http://www.uo.com)PGUID:0F25F02B-854E-49B3-8F68-6D27CE4D477E$11.0.0.28844PAK@Window

  • CN AD 11 g connector update attribute

    HelloWe have OIM 11 g r1 talk to AD 2010 using AD 11.1.1.6 Connector. We are not able to update the CN attribute of the user on the last change of name or surname.Its our requirement to update CN of the user on the evolution of the FN or LN. Has anyo