ActionScript using film

Similar Questions

• Using film as a data type time codes?

  I work in the film, and I was hoping to use numbers to help me create quotes for a VFX project (based on cost per second). I tried to create a custom data type, and it works almost out of an important obstacle. -That, even if he is HOURS: MINUTES: seconds, DURING which it is not no matter what equivalent of FRAMES (which are usually 24, 25 or 30 depending on what video format you are working in).

  I use Adobe Premiere to export a list of lots of files under a CSV file, which are fine numbers. However, manipulate these data is - I would say - impossible without the support of the video time code. Anyone working on a solution for this? Or is there a suggestion feature to me link to forward this to the team of numbers?

  Thank you very much

  You can give your comments and suggestions to the numbers > provide comments numbers in your menu.

  But everything first, perhaps you could post more details of your problem, what your imported data looks like and what result you want.

  If the imported data includes a column for the frames I think you can convert that.  In all cases, the specifics would help.

  Wayne explains how to post a screenshot in this thing.

  SG

• Is it possible to use film of Muse?

  I understand HTML5 using different film formats for different browsers, such as .wem and .ogv. I have movies in the formats needed, I want to use it on my site. Muse allows all or part of these formats to insert?

  Hello

  Check this thread, discuss the similar issue

  Re: What video format which is compatible with Muse

• Flash CS4 ActionScript using buttons to go to cue points in an FLV

  Hello.
  I'm pretty much a novice Flash, so I don't think that this issue is particularly difficult, it's just something that is painful for a few days. I know it's possible based on all the literature I've read, but I can't seem to do it properly.

  Basically I have a video file that I made to FLV format with 5 points of navigation called 1, 2, 3, 4, 5.

  What I want to do, is to use buttons to navigate to the five cue point in the flash animation. I think that this is possible using ActionScipt 2, but I don't know what the code of the script function.

  Any help would be much appreciated.

  
  Thank you
  Javier

  Hello

  The following AS2 code can help you

  Stop();

  var listenerObject:Object = new Object();
  listenerObject.ready = {function(eventObject:Object):Void}

  }

  .addEventListener ("ready", listenerObject);
  var listenerObject:Object = new Object();
  listenerObject.cuePoint = {function(eventObject:Object):Void}
  .onRelease = function () {}
  playback.seekToNavCuePoint ("");

  }

  }
  .addEventListener ("cuePoint", listenerObject);

  \\replace all things placeholder which the<>

  Also just take a glance to the description to http://livedocs.adobe.com/flash/9.0/main/wwhelp/wwhimpl/common/html/wwhelp.htm?context=Liv eDocs_Parts & file = 00003003.html for more details

  Thank you!

  PS: pls mark that message as if it were a help to you have it

• file extension best universal to use film?

  Can you please indicate which movie file format would be preferable to reach the widest audience? We had a mp4, but seems more old Windows editions do not support playback of this 'new' format? (if I'm not mistaken)

  MOV would be limited because it would force people to Windows to download Quicktime, correct? So, what should be? In this case is WMV - the best choice? Most of our users are Windows / PC base.

  Please advise, thank you!

  Probably a MPEG2 file, with the extension .mpg, would be the most universal and still offer appropriate quality options.

• Passing variables ActionScript 2 using javascript

  Hello

  I tried to pass variables to a flashdrive with on the page refreshes. In doing my research I fell I cross things like externalinterface and others.

  I found a javascript + actionscript who spent ariables flashing without updating the code page:

  I have therefore 8 flash with actionscript 2.0.

  HTML:

  <SCRIPT LANGUAGE=JavaScript>

  <!--

  function callJavascript() {}

  Mathias var = inputValue.vars.value

  window.document.myMovie.SetVariable ("testValue", Mathias);

  }

  ->

  < /SCRIPT>

  <object classid=' clsid:d27cdb6e-ae6d-11cf-96b8-444553540000 ' codebase="""http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8, 0,0,0" " " width="550" height="100" id="myMovie" align="middle"> "

  <param name="allowScriptAccess" value="sameDomain" />

  <param name="movie" value="setplay.swf" /><param name="quality" value="high" /><param name="bgcolor" value="#ffcc00" /><embed src="setplay.swf" quality="high" bgcolor="#ffcc00" width="550" height="100" name="myMovie" align="middle" allowScriptAccess="sameDomain" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer" />
  </object>
  </body>
  <p>
  &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;<input type=button value="Pass the variable to Flash" onClick="callJavascript()">
  <form name="inputValue">
  
   <a href="javascript:callJavascript()"> flash one</a><input type="hidden" name="vars" value="1.flv"/>
    </form> 
  </html>
  

  I have a flash drive with a movie player instance name of myVid:

  ActionScript:

  var testValue:String = "";

  watchCallback = function (id, oldval, newval): String {}

  result_txt. Text = newval;

  myVid.play (newval);

  return newval;

  };

  _root. Watch ("testValue", watchCallback);

  The code gets the variable var in the html page. Pass vars to actionscript using javascript, displays text on result_txt and play flv video with similar name to a variable passed.

  The problem is:

  I have several a href links that I would like to have the different variables that they would pass to the flash drive.

  < a href = "javascript:callJavascript ()" > flash < /a > < input type = "hidden" name = "var1" value = "1.flv" / >

  < a href = "javascript:callJavascript ()" > flash two < /a > < input type = "hidden" name = "var2" value = "2.flv" / >

  < a href = "javascript:callJavascript ()" > flash three < /a > < input type = "hidden" name = "var3" value = "3.flv" / >

  < a href = "javascript:callJavascript ()" > flash four < /a > < input type = "hidden" name = "var4" value = "4.flv" / >

  How can I change the code so that if someone clicks on a flash of the value of var1 is passed to flash.

  and if two flash is clicked var2 are passed to Flash.

  Thank you.

  http://circlecube.com/2008/02/ActionScript-JavaScript-communication/

• See pictures as in xp "film".

  original title:

  In 'View' in Windows XP, I can use "Film" to instantly view the selected mode images full-screen.  I am unable to do it on Vista and so keep XP on one machine to manage the images.

  Other options?

  http://social.answers.Microsoft.com/forums/en-us/vistaappearance/thread/438b2ac5-3626-410b-aea6-0485406610e0

  Read the above info.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows DVD Maker Burns not part any video of the film, I have a black screen in the middle of the music and titles...

  I made a movie in Windows Movie Maker using film 8 mm which was transferred to the files. The film came out great but when I go to 'release', or burn to dvd, it says Windows Movie Maker will save file and open it in creation of DVD to burn/publish.  About halfway through the movie, there is no 8 mm video, you can see all the titles, and hear the music that I edited in but no video.  I cut the video in half thinking there was too much data, I burned my movie with no other programs running, I changed all the transitions and titles in thinking that you might have a glitch.  I have burned about 10 films try something different each time without success. Help!

  Hi girl Jeffs.

  I suggest you try the following steps:

  Step 1: This question could be associated with video filters in windows movie maker:

   

  Create a movie with reporters off and then try to publish

  To turn off the filters, follow these steps:

  In windows movie maker

  1. click on Toolsand then click Options.

  2. click on the compatibility tab.

  3. to turn off a filter, clear the check box next to the name of the video filter.

  See the link below for more information on the audio filters video\

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

  Step 2: Try to reduce the speed of DVD burning in windows DVD creation and check, see the link below for the steps

   

  Change Windows DVD Maker DVD-video settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

   

  For more information, see the link below

  Publish a movie in Windows Movie Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• call for an id in flex by programming with actionscript

  Hi... I have a question that will most likely be a fix to a simple syntax.

  in the past, I could successfully reference the id of an element and its properties via actionscript using a variable... so say for example a textbox element has an id = "txtBox_2"... I could mention this text box and its properties without typing hard and using this actionscript:

  initApp = "test (2)"; "

  test of the public service (useID): void {}

  ce ['txtBox_'+useID] .text

  }

  but I can't go deeper than that... Let's say, for example, I have a component within a component... in this case, I'm calling 2 levels component to the bottom of my main.mxml file

  in main.mxml, I have an element with an id of comp1

  I have another component called comp1 comp2

  in comp2 I have function called loadData();

  I figured in main.mxml, I could run this function by changing the code above like this:

  This

  ["comp1." [ + "comp2"] .loadData ();

  but I get the error that flex can not find this ID can anyone help?

  Thank you!

  (this ["comp1"]) ["comp2" "] .loadData ();

• Flex ActionScript projects. Flex components

  It is possible to create projects Flex 3 ActionScript uses Flex 3 components/containers?
  
  The goal is to get the same result with MXML, only using only the classes ActionScript in the whole of the project. So far, using Flex Builder 2.0.1 I tried to create an ActionScript project with the main class extending mx.core or mx.containers components. I have reproduced the same source/SWC settings project as a project MXML, but definitely got errors when compiling.

  The errors you get are not compilation errors, but errors of execution. You are getting these errors because extending actionscript components Flex requires more code that you have currently, MXML take care of that behind the scenes.

  To see the action script code that is generated when you write a simple mxml Application button to use the option-keep-generated-actionscript = true duing compilation and the product action script is stored in a folder called generated.

• Continue reading film

  
  I have a used film of button with labels for upwards and on, thinner. The button launches another SWF file when it gets to the last frame of the end labeled section. The function is called to play the OnRelease label. The problem occurs when the user moves the mouse over the button until the Tween has fully played. I would like to know how to make a mc continue to play regardless of the mouse or button for full or no interpolation.

  do not use a Deployment Manager. instead of a loop on the last frame of your more ltween running a hitTest() between your mouse and movieclip button repeatedly. use the results of this hittest when run your behavior of implementation and to terminate the loop.

• Library swf with does not perform the actions

  I have an actionScript animation film simple (using Greensock TweenMax) after export works fine when I open the .swf file obtained on its own (double click on my Mac finder).  My film has 2 frames, frame 1 sets up the interpolation on the object function in my film, frame 2 performs the function and stops.  As I said, if I open the exported .swf file or preview in a html browser, I see the desired animation effect.

  However, when I include the swf exported in another project file (using import to library) and drop it in my main script - I don't get the animation that I see in my standalone swf file.  I tried to call the file directly to play and notheing happens.  When I opened this symbol of swf (double clicking) after putting on the main timeline, I see 2 managers, but only in the original file symbiols graphics are in these frameworks (no action).

  I test the same goal using an exported swf of a film by the animation timeline (classic Tween), and it worked fine).

  What Miss me?  Is it possible to take advantage of a file to swf actionscript animation in other films?  I want to do so that I can create a bunch of stand alone animations I load in dynamically and play without chronology animate each one.  Any help GREATLY appreciated, thank you very much!

  Yes, if it's an AS3 file you can use the Loader class.

  If you want the movie to be physically in the other alternative file would be to copy the script of the film to a movieclip in the other file.

• Can not see the dynamic text on the music video for the main stage

  Hello

  I'm a complete newbie to Actionscript using Flash MX. I created a clip with a dynamic text box which works fine when I test the movieClip stage.   I brought that on the main movie timeline, and when I go to test the movie, dynamic text no longer works.  I tried actionsript options on the main timeline and the chronology of the film but can not know where I am going wrong. Could someone give me a procedure not to not very basic as to what I have to do to make this work?

  Thank you

  TIFF

  Search for the loadVariables function so that you use it properly.

• problem between loadmovie and the sound of the movie loaded

  Hi, I've done a swf that uses sound events and he plays very well. the sounds are dealed with its new, somesound.attachsound, somesound.start, somesound.stop and so on, the binding properties are something like "export for actionscript" and "export in first frame" checked. the movie plays ok when I look at with the swf player or in a web page. the problem is when I put a preloader in an external file, the main movie is mainly photos so it would remain as a blank screen when loading, so I had to do an external preloader, but when the film main plays commissioned by the preloader, sounds controlled via actionscript used to play, pointers or suggestions?
  TNX

  Flash is probably looking for the sounds related to the library of _level0.

  to remedy this, use what that = new Sound (this); instead of all that = new Sound() during instantiation of sound objects in your external swf file.

• Burn a disc to 1080 50 p

  I imported and edited a film in 1980 x 1080 50 p. How can I burn to a disc in this resolution? It is a short, and if I try to burn it as a BluRay to DVD does it automatically at a resolution of 720. When I used film to 25i, it allowed the 1080 resolution most important.

  toast, or a compressor do? And I would need a separate BluRay burner, or I would be able to do as a BluRay to DVD?

  Or, after getting to 50 p, can I reduce to 25 and burn it to 1080?

  I burn some kind of record for a film club showing, but I want to make the best possible record.

  I have just FCPX. IF I don't want to spend the extra money on programs and burners, I better stick to 25i or p for the filming of the future?

  The Blu - ray specification does not support the 50 p or p 59.94 HD, only in 4K.