Activate a call forward with a third party SIP device or an analog device

Similar Questions

• Is it possible to save an EX60 as a third-party SIP (Advanced) on the CUCM device?

  Hello world

  I'm new to the word video, telepresence, H323, SIP.

  I know that it is now possible (and recommended) to save natively EX60/90 on the CUCM, IE as telepresence devices (whether with the TC firmware or TE) and support the full functionality rather than to be registered as a device SIP but still... is only possible and what is the configuration?

  Here's the final scenario, the SIP registration is a test associated with this scenario:

  -CUCM version 7.1.5

  -MSE 8510

  -EX60 TC 5.1

  -Jabber clients listed on CUPS

  My customer wants to make point-to-point calls between EX60 and Jabber clients.

  Two possibilities:

  1-

  -EX60 registered as a device on the MSE 8510 H323

  -MSE 8510 SIP Trunk with CUCM

  -EX60 and Jabber customers can call each other via the SIP Trunk

  2-

  -Given that the customer wants only point to point calls, I just thought I could register the EX60 directly to the CUCM as a third-party SIP device (Advanced because I need video calls). CUCM version 7.1.5 then did I can't save it as a device of EX60. What do you think?

  3-

  -What about recording on the CUCM H323? CUCM constitutes a H323 Gatekeeper or do you need an external controller. What is the point of having a customer registered H323 (or created as a device) on the CUCM?

  Thank you

  Hi Matt

  Please refer to

  https://supportforums.Cisco.com/message/3671155#3671155

  https://supportforums.Cisco.com/message/3919058#3919058

  hope this fixes your first query.

  3 > registraion H323 on CUCM, i don't know if I'm 100% correct but there is an option of setting up a H323 gateway on cucm

  You can created a h323 trunk

  There would be a better support 8.6 from

  still I'll leave to the experts of cucm to comment

  Thank you

  Ravi Kr.

• I work with a third-party provider that adds agricultural markets that will update every 10 minutes on my site of muse. I'm a designer by trade, and they are the html code. They have problems with my original design elements being pushed around when they

  I work with a third-party provider that adds agricultural markets that will update every 10 minutes on my site of muse. I'm a designer by trade, and they are the html code. They have problems with my original design elements being pushed around when they add the js include. They recommend at this time that I use another program like Wordpress, but I won't do that, because a large part of the site is designed and just add the markets. Here is the link to the site. At this point, the home page is the question. I can also provide a screen shot of how markets are supposed to look like

  This part does not seem too difficult.

  I bet they are now trying to "knit" their share of data right in your Muse- generated page, and they tell you that your code is terrible (and their smells like daisies). The usual clash...

  But it might be easier for you (and many others) if they offer their content as a separate page of small, so you can incorporate it as an iframe tag in an HTML object in Muse. No matter what code for permission to host the iframe, could be inserted as a simple script in Panel of Options of Page of Muse.

• Three questions.  The heart rate monitor now plays nice with the third-party applications?  Can you run these third-party applications, without the link to your phone?  How much storage?

  My experience with the original watch is that the heartbeat was working fine with apps in the House but does not work well with third-party applications.  Aboriginal health applications were sub par at best.  In addition, he wouldn't these third party apps (Strava), unless you were related to your phone.  A new doesn't do me much good if it is always the case.  Finally, it's great that you can bind your helmet now but what storage is the watch have?  I am not unrealistic, its understandable if its not much, but I hope that it is enough that a few apps and music enough to pass through a 4 hour tour.

  1 WatchOS3 made major changes in this area, and 3rd party applications get access to things like HR. OS3 also makes everything much more receptive. 3rd party applications will need to be updated to play with the HR monitor.

  2. you can run applications 3rd party without the phone with you, but for your type of application, you'll want a series 2 with GPS watch. The likes of Runkeeper OK working in the older shows, but without GPS, they do not really work you need. New - 3rd third party apps will need updates to work with the GPS watch. OS3 software has been available to developers for a while now, so I expect software updates only very quickly. I don't know if or when 3rd parties had access to the equipment and GPS devices, s, then it may be some while before they have series 2 updates.

  3. you can store 2 GB of music. How much music that is depends of course format and quality, but certainly several hours.

  Hope that helps

• Sharing a font with a third-party designer

  I work with a magazine (as an employee), and we have hired a third-party designer as an independent contractor to help with some aspects of the layout. We will give it a try for a question to see how things are going. Unfortunately, it does not have the police that we use for our titles, subtitles, etc. I wonder if there is any problem sharing my copy with him, at least for the trial period. My license agreement allows me to install the font on up to five computers, but I don't know if that would extend to an exit from the House, designer of third-party (I think that it is not). But I don't like spending $250 for all the different weights of the police if we end by not working not not with the designer in the long term.

  Any thoughts?

  Well, you're right to be cautious, to the extent where most licenses, including the time Adobe, do not allow that kind of sharing. He must have its own license for fonts.

  As a broad principle, it relies entirely on license specific end-user (EULA) in question, and these differ widely among foundries. But few of them allow such use without a licence separately the additional user.

• Create pots Stanadlone with the third-party provider API

  Hello
  I'm working on a few personal explorations using OSB 11 g, and for that I have to call a few pots with my code. But the problem is that I use Apache POI API to read MS Excel files. So, how can I go on the export of the POI API with my code in a single POT. It must be one of the JARS, since to the best of my knowledge OSB does not support referencing multiple jars at one time.

  See http://java.sun.com/developer/technicalArticles/java_warehouse/single_jar/

• Impossible to retart Window XP as an administrator with the same "selective startup" newspaper (with some third party being disabled services) with an administrator account.

  My computer is a Sony (Vaio) desktop computer with Microsoft Windows XP Professional edition,
  service pack 3. It is installed with Internet Explorer 8.

  I meet the Internet Explorer 8 problem right after I tried to run Norton
  Antivirus (2012 version) Live updates some time ago. Updates Live has not been successfully

  completed.

  I tried to open Internet Explorer 8 to connect the site msn.com and others
  Web pages. It still gives me the message "Internet Explorer cannot Display the Webpage".

  I did a full system scan. The computer is clean.
  I also tried to remove all the Internet Explorer add-on to and reset all settings
  by default, but I still can't get Internet Explorer to work.

  I think that something that connects it to the operation of Internet Explorer 8 has been 'broken '.
  during the download of updates to Norton Live. Maybe it's because as the "dial-up".
  slow internet download speed I use, caused some kind of file corruption.
  I'm not too sure.

  I followed a suggestion to Microsoft support engineer in Microsoft Support community
  and I tried disabling Norton services in starting the configuration to see if
  Internet Explorer will work back or not. However, after I did

  Start > run > msconfig

  and all unchecked Norton services and retarted the computer. I had
  an error message saying "I need to log in as an administrator in order to retart.
  the computer with selective startup"even I had logged in as administrator.

  I turned off the computer and retried the above process again, but I still
  got the same error. I did several times without a bit of luck.

  My computer is used only by myself. My user account is an administrator of type with
  all permissions. It is the only user account in my computer.

  I don't know if other permission settings that must be set correctly in order
  for me to retart the computer with the "selective startup" option

  I hope that someone in the Community Support of Microsoft can give me some suggestions and
  instruction. Thanks a lot for your help.

  Best regards
  vichau

  My computer is a Sony (Vaio) desktop computer with Microsoft Windows XP Professional edition,
  service pack 3. It is installed with Internet Explorer 8.

  I meet the Internet Explorer 8 problem right after I tried to run Norton
  Antivirus (2012 version) Live updates some time ago. Updates Live has not been successfully

  completed.

  I tried to open Internet Explorer 8 to connect the site msn.com and others
  Web pages. It still gives me the message "Internet Explorer cannot Display the Webpage".

  I did a full system scan. The computer is clean.
  I also tried to remove all the Internet Explorer add-on to and reset all settings
  by default, but I still can't get Internet Explorer to work.

  I think that something that connects it to the operation of Internet Explorer 8 has been 'broken '.
  during the download of updates to Norton Live. Maybe it's because as the "dial-up".
  slow internet download speed I use, caused some kind of file corruption.
  I'm not too sure.

  I followed a suggestion to Microsoft support engineer in Microsoft Support community
  and I tried disabling Norton services in starting the configuration to see if
  Internet Explorer will work back or not. However, after I did

  Start > run > msconfig

  and all unchecked Norton services and retarted the computer. I had
  an error message saying "I need to log in as an administrator in order to retart.
  the computer with selective startup"even I had logged in as administrator.

  I turned off the computer and retried the above process again, but I still
  got the same error. I did several times without a bit of luck.

  My computer is used only by myself. My user account is an administrator of type with
  all permissions. It is the only user account in my computer.

  I don't know if other permission settings that must be set correctly in order
  for me to retart the computer with the "selective startup" option

  I hope that someone in the Community Support of Microsoft can give me some suggestions and
  instruction. Thanks a lot for your help.

  Best regards
  vichau

  Repair facility and get rid of Norton once you are able to get into your computer again.

• The preview of the browser share with a third party?

  I finished a series of buttons with rollover effects. It will be inserted in an existing Web site. I want the client to experience and to approve all before I post on his page. Can I share the interactive preview in the browser somehow? There is no CC.

  As RavenDesign mentions, just file > publish > Web, then download the file published to a folder on an external host.

  Darrell

• Link with the third-party library

  I need to use the WinPcap library in LabWindows project. I've successfully compiled a very simple design, but it falls on during binding, sends me messages "Undefined symbol". What should I do to get LabWindows to link successfully?

  Thank you

  Steven

  Solved. If someone falls on this in the future, you will have to go edit-> add files to the project-> library and select the relevant .lib or files, as described in http://www.ni.com/white-paper/3341/en/#toc6.

• Third-party EtherCAT device

  Hello

  I want to use a Beckhoff EK1100 - slave EtherCAT in VeriStand. Unfortunately, I have absolutely no idea how to do that. As far as I understand that Scan Engine and EtherCAT only works for the cRIO-chassis.

  I've tried a bit with LabVIEW and am able to use the Beckhoff i/o modules in a LabVIEW vi. However, I don't know how to proceed.

  Kind regards

  TTRD

  In the meantime, I realized, what went wrong. The first error was that I just build Configuration and not the engine. The second error (screenshot from the last post) could be fixed connect via ftp to the target in real time and by removing the file/rt/or VeriStand/custom devices/Beckhoff EK1100. Now everything works fine. Oddly, my LabVIEW code wasn't the problem.

• Blind transfer does not not for third-party phones

  Hello

  I use CUCM 10.5 and Cisco and Ascom MyCo phones third-party. I just stumbled across a problem where the immediate or blind transmission does not work on the third-party SIP devices. However, the transfer works very well on all Cisco phones. Against the workflow and no calls work but couldn't find anything wrong. Please help/tips.

  Hi Anish,

  Can check you for 'Calling rerouting space research' on the phone has access to the number you have transferred blind to.

  JB

• Tips using a third-party host with Muse

  One of my clients pay for their own accommodation with a third party. I created a site for them using Muse. I understand I can load on their third-party host through Muse or export to a folder. I'd rather do the latter and wash my hands of the project and let them deal with him. It was a heavy releationship.

  I watched the tutorial on export to a folder (that I hoped then dropbox to the client) but Muse keeps asking me for a domain, site map SEO and typekit, that occur in the tutorial, I looked. How to get around this? I don't have any idea what area they will use, it might even be a page in a current site, I'm not even sure that the client knows (they have someone who takes care of it). Currently the site is online on the BC using the. businesscatalyst.com address it is naturally affected.

  Am I also right in thinking that they will be unable to edit the site, they will use obviously is not BC dashboard, could someone change the HTML well?

  Thank you

  Penny

  Hi Penny

  You can use any domain you want to save the site in HTML format, it is just a reference to the name of the site while saving the site uses what Muse.

  That doesn't effect the upload process that your client will do at their end by transferring the content to the external server.

  They plan to publish the Business Catalyst site, if yes then you can directly load the site from your end to their account.

  And if they use external server, then they can use in the browser edition at the present stage.

  Please let me know if you have more questions, of if you have a paid subscription, you can check out our beta program.

  Thank you

  Sanjit

• How bridge communicates with third-party applications?

  Hello

  Is it possible to communicate between Adobe Bridge and a third party request help SDK bridge?

  I want to learn how bridge can communicate with another application? SDK bridge have samples that explain how the bridge communicates with other applications such as Photoshop and Indesign Adobe. Can someone guide me or give me a sample where bridge communicates with a third-party application?

  Thank you.

  There is no direct access to the deck from a non Adobe application.

  If you need to access bridge, it must be done via another application such as Photoshop Adobe. THAT IS TO SAY: -.

  C# - Photoshop - bridge

  You must use BridgeTalk to send and receive messages between Photoshop and Bridge.

• Third-party messaging applications using

  I tried a third-party e-mail applications such as Microsoft Outlook on my iPhone instead of Apple's Mail application. During this time, I got the "Mail" option excluded of settings > iCloud sort Mail from Apple does not check for new messages. Everything was going well until I tried to send a picture of the Photos app. Rather than create a new email in Outlook with the attached photo, I was taken in settings > Mail, Contacts, calendars and you are prompted to create a mail account.

  Am I missing a setting somewhere to inform the iPhone to use Outlook as my default e-mail client? Or you just have to give up some features if you go with a third-party e-mail client?

  I use iOS 9.2.1 on an iPhone 6.

  You cannot change the default mail app - it will always be the mail of iOS application.  However, with Outlook, simply start a new message and select the photo icon in the bar mounting options.  You may need to grant access to Outlook to your photo in the settings, but you can choose any photo from your library to send as an attachment.  Alternatively, you can link outlook to OneDrive, DropBox or other cloud services you can use and you can attach files that are stored in these.

• After using a third party partition manager program left to extend my Windows 8 partition, the system of Windows 8 start to a black screen and Windows 8 partition of the drive letter has changed

  Original title: problems of Windows 8

  I have Windows 7 (32 bit) and Windows 8 (64-bit) is installed in a dual boot. I tried to extend the partition of Windows 8 with a third party partition manager. Subsequently, I restarted after having learned so much.

  Later, the first thing I saw was that the locked screen image is replaced by a blue color. Photos of the user are also missing. Once connected, it took a long time for windows everything ready, and I'm stuck in a black screen with the mouse pointer.

  I entered in Safe Mode and found that the drive for Windows 8 letter has been changed (C: = Windows 7;) D: = recovery partition; E: = Windows 8, new drive letter; F: = Windows 8, old drive letter), I tried to change the drive letter, but it does not work.

  Partition of Windows 7 works well (it is what I currently use to put this problem), and I can access the data in the partition of Windows 8. I tried the methods of different repair without result (such as chkdsk and sfc/scannow).

  Can someone help me with this please? Any help would be appreciated.

  Hello

  I understand that you have a problem of black screen with Windows 8 and the drive letter for the partition of Windows 8 is also changed. This problem is due to the use of the third party partition manager program because it affects the registry files and causes the instability of the system.

  Try to run auto repair from the Windows recovery environment and check if that helps.

  Method 1: start the recovery environment with installation of Windows 8 media.

  It is another way to boot the PC and launch recovery tools when something goes wrong with the operating system.

  Please follow the steps below. Insert the DVD to install Windows 8 on DVD-ROM and restart your computer.

  (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.

  (b) select the good time and the type of keyboard .

  (c) click on repair your computer in the lower left corner.

  (d) select Troubleshooting to Choose an option screen.

  (e) click on advanced options in Troubleshooting screen.

  (f) click Auto repair of Advanced Options screen.

  (g) following, choose the operating system by clicking on its button.

  (h) Windows 8 will be looking for problems on the hard drives and verify that all required files are intact.

  
  Method 2: Run the restoration of the system of the Advanced Options screen.
  
  System Restore to restore your computer to a previous state, quickly and easily without losing any of your files and personal settings. Sometimes when you install programs or drivers, they can affect some system settings and prevent other programs to function properly. You can use system restore to restore these settings to their previous state

  Follow these steps:

  (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.

  (b) select the good time and the type of keyboard .

  (c) click on repair your computer in the lower left corner.

  (d) select Troubleshooting from the Choose an option screen.

  (e) click on advanced options in Troubleshooting screen.

  (f) select System restore.

  After the system restore your documents and files will always remain to their previous state.

  If you do not install Windows 8 media, I suggest you connect to any other computer and create a floppy disk to install Windows 8. Using this disk, you can run the troubleshooting provided methods.
  
  How to create the installation media for a PC refresh or reset:

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  You can also try the same steps using the bootable USB key. You must select USB as the first boot to the BIOS device.

  Note: Microsoft don't recommend any third-party partition manager program because it corrupts the registry files and cause the instability of the system.

  Write to us if you're still having problems. We will help you.

  Kind regards