Activate after repair

Similar Questions

• Gets the popup to activate after the repair of Windows XP.

  Original title: Windows XP does not start all the way after repair.

  Programs such as IE, regular windows files inWinXP Professional SP3 machine launched "not responding". The mouse can still move, but programs enclosing and freeze. End task or process does not help. Make a closed down and restarting manual solves the problem, but after 30 to an hour, it happens again. All windows xp update windows have been installed on the machine. After all this, I ran a full scan using Microsoft security essentials and it has detected a virus called "back alureon / has. Attempted to take off and got an error of MSE saying that he cannot remove it. Then, I made a mistake by doing a repair on the operating system. Now, Windows will start all the way. He stops to the background screen screen and sits there idle. In front of this screen, a pop up tells me windows must be enabled before can connect you. Any suggestions how to proceed? Thank you

  Hello Terry,

  You have the option to activate Windows XP or only the message for activation?

  If you have the option to activate Windows XP, you can proceed with him & check if it works.

  For more information, see these links: How do I activate Windows XP?

  How to find a phone number for a Microsoft Product Activation Center?

  Hope the helps of information.
  Please post back and we do know.

• After repaired Windows XP Prof on my HP computer with OEM license while trying to connect to his request activate windows with option or NOT, although I have to say yes or no its loging off drving not me to the main Windows screen

  After repaired Windows XP Prof on my HP computer with OEM license while trying to connect to his request activate windows with option or NOT, although I have to say yes or no its loging off drving not me to the main Windows screen... How do I activate windows or how can I connect windows. Once I login I can activate as I have OEM license... Pls advice

  Activation of Microsoft Hotline - (888) 571-2048 MS - MVP - Elephant Boy computers - don't panic!

• Firefox crashes 2 seconds after the start. This happened after repair upgrade to Windows 7

  After repair, update Firefox (9.0) will not work. I finally uninstalled and reinstalled without success. Following your directions of support I tried to delete my profile with partial success with a new Firefox profile would be run once and then back to an apparent after 2 seconds accident (as seen in Task Manager). After each new profile he followed the same routine of work once. Any help would be appreciated.

  Try a "clean reinstall" Firefox by removing the Mozilla Firefox installation directory before you reinstall, as explained in these articles:

  • Troubleshoot and diagnose problems of Firefox - see "Reinstall Firefox" here.
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall (De MozillaZine KB article is currently unavailable)

  If Firefox still crashes after a clean reinstall, try the suggestions in the article Firefox crashes - help out, prevent and get help fixing accidents here and, if possible, after a crash report ID, as explained later in this article.

• My iPad 2 could not activate after installing 9.03. Say... could not be activated because the activation server is temporarily unavailalble. I tried to 'activate' for four days... went to an Apple store bar 'Genius' and still no solution.

  I have an iPad 2 and before executing the last IOS 9.3 update, it was a camera works perfectly well. I don't have any iCloud upward. I have the valuable photos and info on my iPad that I don't want to lose!  Now I can't even use it!  He failed to activate after the execution of the update and is now in an infinite loop.
  The display shows the following:

  Could not active iPad. Your iPad could not be activated because the activation server is temporarily unavailable. Try to connect your iPad to iTunes to activate it, or try again in a couple if minutes. If the problem persists, contact Apple support. .... Try Again... and again...

  I was 'Try again' for four days and spent a day at the Apple Genius Bar store.  They could not find a "fix" and suggested I send my iPad in California and pay for data recovery, because the next step would be to wipe my iPad!  ***!

  I understand that you're angry about the issue of server activation, but sittuations as why it is so important to backup your data using iTunes or iCloud. You never know when you might have to restore from a backup.

  http://appletoolbox.com/2016/03/iOS-9-3-activation-error-update-fix/

• iPad 2 will not activate after installing 9.3

  My ipad2 activate after installing the latest update, ios 9.3.  The only option is to return a page to select the wifi.  He let me try again, but the result is always that your ipad could not be activated because the activation server is temporarily unavailable.  Try to connect your ipad to itunes to activate or try again in a few minutes... over and over and over again.

  My iphone6 had no trouble to activate after update.

  I connected to itunes, but it is said that your ipad is not recognizable.  Apple does not know I have crops to harvest, collect and angry birds launched coins?

  https://support.Apple.com/en-us/HT206203

• iPad 2 will not activate after update 903

  iPad 2 will not activate after update 903 said only: update completed and just a few steps and you're done displays white screen

  Try resetting your device. This will not erase your data stored on that device.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Take a look at these articles:

  Solve the iOS update and restore error in iTunes - Apple Support

  Get help with iOS update or restore errors - Apple Support

• How to activate after update on iPad

  How can I activate after update on iPad.  I get the error message

  Force reboot your iPad.

  Press and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo. »

  If this does not help, please reply and tell us exactly what the error message said.

• IPad 2 will not activate after update

  IPad 2 will not activate after the update this morning he says "could not activate ipad, ipad could not be activated because the activation server is temporarily unavailable. Try to connect your ipad to iTunes to activate it, or try again in a few minutes. If the problem persists, contact Apple to Apple.com/uk/support support.

  I tried to connect my ipad to iTunes and I get the same message that I have also restored the ipad and still the same message from Paris! Started to get a little frustrated now. Any help would be great.

  Many users encounter this problem. The server may be overloaded. I suggest to wait and try again later. This can be irritating, but it seems that the only solution for now.

• the goal even after repair

  I recently bought a refurbished rebel t5 with the kit lens 18-55mm, as well as the 10-18 mm IS and 55-250 IS lens. Everything has been fine with all my equipment except for the 18-55 mm lens. When the rotation of the lens to zoom in or out, there was a notieable rubbing or grinding noise and there were a few sticking points where the goal was not spin smoothly. I took in a Canon customer service center and they we sent for repair. I am the home goal today and everything is exactly the same thing when I sent it. Same grinding noise, even the sticking points. The service details, bak I say "your product has been examinded and it was found that the party was out of position, causing noises occur. The part of the description says "Focusing ASSY YG2-2353-000 part number".

  I have also two older lenses that I had with the original Canon EOS rebel, I have a 18-55 and 75-300. So none of my other 4 lenses have this problem, but I don't know how many questions it's really. This could potentially damage the lens over time? Or is that what I should really worry? It isn't really the effect on my shot, but I don't want to be slowly causing damage every time that I have to zoom in or out. Since he was sent back to me like that after repair, should I just assume that it is not a big deal, because the repair obiously Center don't think it was if they sent back like that?

  Thanks for any comments,

  Matt

  Matt,

  I don't have this particular goal, but I've been involved with a lot of people what to do. «It is not really effect my shooting,...» ", seems to be like that.  The lens can jump gear fairly easily. You can reset it by deleting and expanding the focus and zoom all the way, both ways.  You can hear a few clicks.  Be gentle.  It's really not a good candidate for the repair, if it is under warranty.

  Using it, he can't last forever or not. If not, buy the new improved version. The Canon EF - S 18-55mm f/3.5-5.6 IS lens STM or elsewhere, far, the best choice for Canon EF - S 17-55mm f/2.8 IS USM Lens.

• Says Lightroom serial number entered is not valid after repair of the system occurred, require disabling series in order to reactivate the same computer

  Says Lightroom serial number entered is not valid after repair of the system occurred, require disabling series in order to reactivate the same computer

  Can you please send me the serial number, you have a private message ?

• POST show different screens and no customization after repair?

  Hey guys,.

  I have an Alienware Laptop, 17 and it was recently repaired. Before it was repaired the POST was really clean. He showed the alienware without progress bar and then booted Windows logo.

  Now, after repair, it first shows a black screen, then a list of recognized drives and watch then the logo alienware with a red progress bar. Also, the 8 Windows loading screen is resized as if the resolution is lower.

  Computer model	Alienware 17
  BIOS Editor	Alienware
  BIOS version	A14
  Date of the BIOS	24/09/2014
  OS version	Microsoft Windows 8.1 Pro

  This is the current configuration of my computer. I watched several times in "F2" (BIOS) for an option of 'silent start-up' or something else, but can't find it. What has changed?

  In the BIOS, select UEFI and secure boot. Try this. Which removes the progress bar.

• XP hangs when I try & activate after doing a repair installation.

  I perform a system repair of windows XP sp2 from the original media. The repair is fine. I have the dialog box activate windows after the connection. Next, I get a dialog box that says "I can't continue until I have activate windows. I answered Yes to the prompt to activate windows and the system hangs. I get no response. He said not impossible to activate windows or active windows. Any suggestions?

  Boot into "Safe Mode with command prompt.

  At the command prompt run type the following EXACTLY

  Rundll32.exe syssetup, SetupOobeBnk

  * NOTE: The "Oo" in Oobe is 'oh' - not 'zero' there is a space after rundll32.exe.

  Press the Enter key

  Restart the PC in normal mode

  I hope that you will now be able to log in and run a report MGADiag and have time to fix the problem.

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool
  (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!
  http://www.Microsoft.com/en-us/howtotell/hardware.aspx

• Impossible to activate the widows xp after repair with another original drive is lost

  have a laptop a toshiba tecra a3x for about 8 to 7, has lost the original disc, had to do a repair with another drive, now it says mDiagnostic report (1.9.0019.0):
  -----------------------------------------
  Given WGA-->
  Validation status: invalid product key
  Validation code: 8

  Code of Validation caching: n/a
  Windows product key: *-* - BK84X - BP43D-VWWR3
  The Windows Product Key hash: ktt7V6c0R/4KZ3vpSFWLdyO3tP4 =
  Windows product ID: 76487-011-5308291-22820
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 5.1.2600.2.00010100.3.0.pro
  ID: {290F85A5-6AA8-4114-AE1D-8E1B0E68FEDB} (3)
  Admin: Yes
  TestCab: 0x0
  WGA version: registered, 1.9.42.0
  Signed by: Microsoft
  Product name: n/a
  Architecture: n/a
  Build lab: N/A
  TTS error: n/a
  Validation Diagnostic: 025D1FF3-230-1
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a
  Version: n/a

  WGA Notifications data-->
  Cached result: 8
  File: Yes
  Version: 1.9.40.0
  WgaTray.exe signed by: Microsoft
  WgaLogon.dll signed by: Microsoft

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Enterprise 2007 - 100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-230-1_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\IEXPLORE.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {290F85A5-6AA8-4114-AE1D-8E1B0E68FEDB}1.9.0019.05.1.2600.2.00010100.3.0.prox 32*-*-*-*-VWWR376487-011-5308291-228205S-1-5-21-527237240-2052111302-1177238915TOSHIBATECRA A3XTOSHIBAVersion 1.3020060221000000.000000 + 0005E0E3407018400F204090409Eastern Standard Time(GMT-05:00)03100100Microsoft Office Enterprise 2007127480B9502DF0D86oYWOW5ayFE3pZ + jvTpuXYsY64JE =14 89388-707-8722531-65687

  License data-->
  N/A

  Windows Activation Technologies-->
  N/A

  --> HWID data
  N/A

  Activation 1.0 data OEM-->
  BIOS string matches: Yes
  Marker of the BIOS string: 5A2A:Semp Toshiba Informatica Ltda. 5A2A:TOSHIBA CORPORATION
  Marker of OEMBIOS string. DAT: N/a, hr = 0x80004005

  Activation 2.0 data OEM-->
  N/A

  my copy is not original, and was old xp cd I use xp 3 cd for repair service it help me please. my original xp key I on the laptop, I run the validation applications, the result is pasted below

  Hello

  1. you receive an error message?

  2. using the same product key that came with your computer from the manufacturer?

  I suggest to run the Windows product key update tool in the following article and follow the instructions.

  Update your Windows product key

  http://Windows.Microsoft.com/en-us/Windows/help/genuine/product-key

  After updating your product key, you will be required to Activate Windows XP.

• Computer will not activate after installing XP SP2 repair

  I see a lot of people have posted on this subject, and some have set.  I did a repair of an old computer installation.  At the start, it says I need to activate my copy of XP.  It just hangs.

  I can boot into safe mode (but not with networking).  I followed the 312295 article, which had me do the following

  1 regedit-localmachine-software... - winnt - winlogon - notify delete RESETS (there was none this entry, so I didn't do anything)

  2... regedit wpaevents OOBETimer 'Edit' (don't know what you mean about a hex file editing, so I just delete a line)

  3 renamed WPA.dbl

  4 extended wpa.db_ from wpa.dbl installation disc (ran OK)

  5 looking for any reset5.* or srvany.exe (no current)

  6 restart the computer.

  The same problem.   Still will not start.  Any other ideas?

  Some recommend to replace IE 8.  I'm certainly willing to do that - except my installation disc is a version of SP2.   So, how can I get a version of SP3 to install in safe mode?   (I download from another computer, but I don't know which version to get).

  Why I installed? There was no failure, but because after 8 years of use the computer was bogged down so he could barely work.

  But if this was justified is besides the point, because it is already done.

  I installed SP3.  I Redid the things listed above.

  I still get the message saying to activate windows and it crashes whenever I try.

  So I took the advice of others, installed IE8 in safe mode.  Upon restart, it worked!  (An arisen window asking me to activate, I said yes and it worked.

  This window looked like IE8 material - probably at the heart of the problem.

  Problem solved.