Activate connections encrypted for the database engine (SQL Server Configuration Manager)

Similar Questions

• VMware Clod Migration boot cd for the database Migration SQL Server

  Hi techies,.

  I have a requirement to migrate one of our physical DB server to the virtual machine, it is very important to business so I thought to go with cold cloning with boot cd, but I could not get this cd bootable anywhere... ! can someone help me on this? and also please suggest me there at - it another way, I can do this task successfully with some fails?

  VMware Converter 5.x has the ability work synchronize to power use this run a p2v migration

  (1) perform a P2v full and when its done and you're ready to cut more

  (2) stop the database service and do a synchronizaion and put the virtual machine online

• How to determine the level of Group of patches for the database Oracle EBS Server?

  Dear
  How findout patches for the database server Oracle EBS group level i.e. 10.2.0.3?
  
  Concerning

  Dear Suzy,

  I was looking for a patch of database being upgraded. After the database owner (enviroment) to supply file, I used the following command from $ORACLE_RDBMS_HOME/OPatch directory, command like $ OPatch lsinventory, he listed all the patches and updated patch also.

  'OPatch lsinventory' must list all patches applied to $RDBMS_ORACLE_HOME. For the level of database of the Group of hotfixes, you can use one of the instructions above to get the version. In addition, you can check to the BONE by running executable files (i.e. sqlplus, impdb... etc).

  And on request, I used-> -use $AD_TOP/sql/adutconf.sql , it is perfectly correct.

  Ok.

  But I can't go through of OAM,-diagnostics of Applications using, you can guide me. When I select plan of the site-diagnosis & repair - run diagnostic tests, it error. Say year error has occurred!
  Please note: you don't have sufficient privileges to perform this function.

  OAM and Diagnostics Applications are two different things.

  Diagnostics of applications can be run from "Oracle Diagnostic Tool".

  Note: 358831,1 - E-Business Suite Diagnostics run Instructions
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=358831.1

  Note: 167000.1 - Installation Guide for E-Business Suite Diagnostics
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=167000.1

  For the Group of hotfixes in OAM, follow the steps described in the following note:

  Note: 550654.1 - how to get patches Oracle Applications products in R12 group level
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=550654.1

  Kind regards
  Hussein

• Cannot display all of the databases in SQL Server 2012 when using CONTROL SERVER permission on user

  Hello

  I'm testing the implementation of a user who has the CONTROL SERVER permission.

  I created a database MYDB with my sysadmn account.

  I have the connection with another say TESTUSER user account (this is a SQL login) who received the CONTROL SERVER permission only.

  The TESTUSER can see the MYDB database in SSMS.

  The TESTUSER Gets a message when you try to view the tables in the MYDB pressing the sign +. :

  "The MYDB database is not accessible.

  If I try to do a right-click on the MYDB database, I get the following:

  'User has not authorized to perform this action... ". Error 297 "

  Even if I GRANT the ALTER ANY DATABASE the TESUSER permission TESTUSER still gets this error?

  I thought that CONTROL SERVER permission would allow a user to see all databases even those that the user does not have?

  So does the same for the ALTER ANY DATABASE permission?

  Is this a bug or am I missing something?

  Thank you

  DOM

  DOM

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• 84 40007 error code update could not be installed for the service of SQL Server 2008 (KB2285068) Park

  I'm at my wits end trying to install it, I even downloaded a program called RUN mircosoft told me (via their help center) to find & fix problems with updates, I noticed some stuff on other accounts on my laptop to tell me to this day, the Comet 12mth service has been paid for , but they help her, please help, I'm pulling my hair out, thanks to all those who can, I'd be so grateful, also thanks to those who helped me with my last problem (you know who you are) you helped me a lot of time

  Try posting in the SQL Server Setup & Upgrade forum for assistance:http://social.msdn.microsoft.com/forums/en-US/sqlsetupandupgrade/threads/>

• Using Reporting SERVICES report server cannot open a connection to the report server database in SQL server 2008 R2 sp1

  Hello

  I'm running Reporting SERVICES Version 2007.0100.1600.022 ((SQL_PreRelease). 080709-1414 in Visual Studio 2008 with Microsoft SQL Server 2008 R2 Express Edition with Advanced Services (64-bit) on Windows NT 6.1 SP1.)
  Everything seems to work fine except that I can't deploy: "the report server cannot open a connection to the report server database."
  Connection test ReportServer as OK in the Configuration service report manager and Visual Studio. Run reports in Visual Studio against ReportServer and my other databases.  Deployment fails on a report of VM. Remote access is enabled in the firewall, pipes is enabled in configuration Manager SQL server, the permissions for all access in Windows.
  The error in the log file of report Service:
  Library! WindowsService_1! 12ac! 09/23/2012-21: 05:12: e ERROR: ServiceStartThread: Exception caught during the startup of service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerDatabaseUnavailableException: the report server cannot open a connection to the report server database. A connection to the database is required for all applications and treatment. ---> System.Data.SqlClient.SqlException: a network-related or instance-specific error all by establishing a connection to SQL Server. The server is not found or inaccessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - error Search Server/Instance specified)
  Any ideas?
  Thank you.
  -Phil

  Just, I solved the problem I had.

  It turns out, there, there were two questions... first concealing the second.

  SQL Web browser has not been activated.  solution: in properties SQL server configuration manager, transformed the startup to automatic mode and activated the service.

  Microsoft Visual Studio project property targetdatasourcefolder had a server name that precedes the name of the folder. Removed the name of the server.  This works.

  Everything unfolds right now.

• Checking the connection failed for the source of data on port 1433

  Try to set up a DSN for a database of SQL Server on a new computer and it fails every time.

  Connection verification failed for data source: csf

  java.sql.SQLNonTransientConnectionException: error [Macromedia] [SQLServer JDBC Driver] establishing socket to host and port: SANDYPC:1433. Reason: Connection refused: connect

  The root cause was that: java.sql.SQLNonTransientConnectionException: error [Macromedia] [SQLServer JDBC Driver] establishing socket to host and port: SANDYPC:1433. Reason: Connection refused: connect

  Now, when I installed the CF 11, it is installed on port 8500.  However, when I try to change the port in the configuration to 8500, I get this error:

  • Connection verification failed for data source: csf
    java.sql.SQLException: timed out trying to establish connection
    The root cause was that: java.sql.SQLException: timed out trying to establish connection

  I can't find anything online about how to solve this problem!  Help!

  Hello

  Is that SQL Express edition? If so maybe TCP protocol is not enabled. Windows Firewall is enabled? Check port 1433 is open.

  Normally you would not create a data source to the apache 8500 port, which is a web server not Database not the port of the server.

  HTH, Carl.

• Is there a way to change the connection string to the database by using the command line on the virtual machine?

  Hi, I use 1.5 space Horizon

  can someone help me by telling me where I can change the connection string for the database on the virtual machine itself.

  I was away, and our stuff has been migrated databases to another server. Now my horizon does not connect because it can not find the database. I can either on the hwconfigurator.xxx.com.

  Thank you

  What do you see when you go to https://hwconfigurator.xxx.com?

  You can try to change this property in /usr/local/horizon/conf/runtime-config.properties on your service - will (s) and the server restart of tc by using the command "/etc/init.d/horizon-frontend restart".

  datastore. JDBC. URL = jdbc:PostgreSQL: / //saas? = stringtype unspecified

• Connect to the database with SQL * more: is TNSNAMES. ORA used?

  Hello

  We have a local database called DEV01 and a copy of this database in a data center. To be able to connect to both databases, the TNSNAMES file. ORA

  on the local database server (not the one in the data center) has the following entries:

  / * Entry for the local database * /.

  DEV01_local, DEV01_local. WORLD =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST = server01) (PORT = 1521))
  )
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SID = DEV01)
  )
  )

  / * Entry for the database in the data center * /.

  DEV01, DEV01. WORLD =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST = server02) (PORT = 1521))
  )
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SID = DEV01)
  )
  )

  When I connect to the local database server, I set the Oracle environment as follows:

  export ORACLE_SID = DEV01

  export PATH=/opt/oracle/app/oracle/product/9.2.0/bin:$PATH

  export ORACLE_HOME=/opt/oracle/app/oracle/product/9.2.0

  Now I start SQL * more as follows:

  Oracle # > sqlplus user/user

  SQL > select instance_name, host_name from v$ instance;

  INSTANCE_NAME HOST_NAME

  ---------------- ----------------------------------------------------------------

  SERVER01 DEV01

  As the SID is on two databases of the same (DEV01) I really don't understand how Oracle decides which of the SQL databases * more connects to.

  Is it the entry in the TNSNAMES file. ORA?

  But when I start SQL * more as follows:

  Oracle # > sqlplus user/[email protected]_local

  SQL > select instance_name, host_name from v$ instance;

  INSTANCE_NAME HOST_NAME

  ---------------- ----------------------------------------------------------------

  SERVER01 DEV01

  or

  Oracle # > sqlplus user/[email protected]

  SQL > select instance_name, host_name from v$ instance;

  INSTANCE_NAME HOST_NAME

  ---------------- ----------------------------------------------------------------

  DEV01 server02

  everything is as expected.

  Does anyone know who is the chosen database when just to connect with 'sqlplus user/user' (without the @DEV01 or @DEV01_local)?

  Any help will be appreciated!

  Rgds

  Jan

  When you connect to the local database that is connected to the server01, you need only specify the sid in the environment, in this case, Oracle tnsnames file to connect, actually uses, it uses any of the listener.  It uses what is called a connection needed.  It is purely a side connection server, and as long as the sid is located in the environment resolves to a database running on that server, you will be get connected.

  When you connect using the @connect_descriptor, like you second case, then Oracle will use the configured naming, including tnsnames, methods to solve the 'real' database  In this case, the auditor is required to create the connection to the database.

  John

• Question about creating report guests editor BI when it connects directly to the database?

  Hello

  I create a report of BI Publisher using direct SQL server database. JDBC connection is created, then datamodel and report.

  The report is parameterized. Now I have attached the dashboard report. But now the settings are not filling. So I intend to create guests, but it is the search for field. But I don't use of RPD. So, how can I create guests when we creating BI publisher report connecting directly with the database? Please let me know.

  Kind regards
  Sam

  Hi Sam,

  I hope you got your answer for that starting from the thread OBIEE quick dashboard for BI Publisher

  Thank you...

• Synonym does public get used by the database engine in the schema of the owner?

  I have database public synonym 'P' and "S.P" table (in the "S" pattern).
  If my article references select array/object 'P' (without prefix-schema for the table), then there is no reference to the table ("S.P') or that it references a synonym ("P")?
  I understand that if my select query is executed in the session/connection made with schema/user "S", then the database engine does not at all synonymous, it will immediately table 'S.P. Is this right?
  Can you just confirm my understanding, maybe I'm wrong.
  
  (Oracle 10g, Windows OS)

  Fix. There is a certain order regarding name resolution.

  If I remember correctly then it searches first for the current schema objects (tables, views, procedures, etc.), then for private synonyms, then public synonyms.

  I get a bit more complex if you have a schema that is also the name of a package for example.

  For more information, see: http://download.oracle.com/docs/cd/B28359_01/server.111/b28310/general008.htm

  Published by: Sven w. December 1, 2010 11:09

• Where can I find the hexadecimal encryption for the router?

  original title: WIRELESS IS ASKING for HEX ENCRYPTION WHERE I would NORMALLY PUT the PASSWORD

  My toshiba satellite pro 4600 when I entered the password, he said I was connected but didn't have no internet.  the signal strength is good... and the rest of my computers work properly.  I wonder if the encryption for the new router I'm not in the HEX code like I did in 'time' once, I entered a real password.  is there a screen somewhere in the router configuration that shows the translation of the password for the real hex/bit encryption?

  Thank you

  It is useless to ask technical questions in the forum Feedback so I moved your message on the forum 'Making in network and get online' Windows.  However, you neglected to mention your version of Windows.  Please provide that.

  Your router provided with documentation that describes the values by factory default, including encryption.  Most routers have no active encryption when fresh from the factory.

• We have SQL Server 2005 cluster (3 node cluster), and if we improve this nodes to 2008 R2, the databases associated with the named instance can stay to the version of SQL Server 2005?

  original title: SQL Server 2008

  We have SQL Server 2005 cluster (3 node cluster) and if we improve this nodes to 2008 R2, can the databases associated with the named instance remain to the version of SQL Server 2005, I seem to disagree with this notion, but still need to validation of the pro.

  One way I can think of to achieve this scenario changes the compatibility level to SQL Server 2005 when the node has been upgraded to SQL Server 2008, so we can upgrade databases to SQL 2008 as and when the vendors provide support for this version.

  Hello

  Here is the Vista forums

  Try the links below:

  SQL Server forums

  http://social.technet.Microsoft.com/forums/en-us/category/SQLServer/

  SQL Server TechCenter

  http://TechNet.Microsoft.com/en-us/SQLServer/bb265254.aspx

  Blogs and Forums SQL server 2008

  http://www.Microsoft.com/sqlserver/2008/en/us/forums-blogs.aspx

• ORA-16783: could not resolve the deficit for the database

  I have two databases emadb and emadbdg, governed by Data Guard. emadb is currently principal. emadbdg is currently pending physical.
  
  ORA16783 - cannot solve the gap for the database is one I think, is the origin of the problem. Anyone can help solve the problem below. Logs attached.
  
  Output of data protection
  
  DGMGRL > show detailed configuration
  
  Configuration - DRSolution
  
  Protection mode: MaxAvailability
  Databases:
  emadb - primary database
  Error: ORA-16825: multiple errors or warnings, including failover quick start or warnings, errors detected for the database
  
  emadbdg - (*) Physical standby database
  WARNING: ORA-16817: configuration not synchronized rapid failover
  
  (*) Fast failover target
  
  Properties:
  FastStartFailoverThreshold = "30"
  OperationTimeout = "30"
  FastStartFailoverLagLimit = "30"
  CommunicationTimeout = "180"
  FastStartFailoverAutoReinstate = 'TRUE '.
  FastStartFailoverPmyShutdown = "FALSE".
  BystandersFollowRoleChange = "ALL".
  
  Fast-Start Failover: ENABLED
  
  Threshold: 30 seconds
  Target: emadbdg
  Observer: emarn1
  Offset limit: 30 seconds (do not use)
  Primary closure: FALSE
  Auto-Rétablir: TRUE
  
  The configuration status:
  ERROR
  
  
  DGMGRL > see the detailed database emadb
  
  Database - emadb
  
  Role: PRIMARY
  State of destination: TRANSPORT-WE
  Occurrence (s):
  emadb
  
  Database error (s):
  ORA-16783: could not resolve the deficit for the database emadbdg
  
  Warning (s) of database:
  ORA-16817: unsynchronized fast-start failover configuration
  
  Properties:
  DGConnectIdentifier = "emadb.
  ObserverConnectIdentifier = "
  LogXptMode = "SYNCHRONIZE".
  DelayMins = '0'
  Binding = "optional."
  MaxFailure = '0'
  MaxConnections = '1'
  ReopenSecs = "300"
  NetTimeout = "30"
  RedoCompression = "DISABLE."
  LogShipping = 'ON '.
  PreferredApplyInstance = "
  ApplyInstanceTimeout = '0'
  ApplyParallel = 'AUTO '.
  StandbyFileManagement = 'AUTO '.
  ArchiveLagTarget = '0'
  LogArchiveMaxProcesses = "4"
  LogArchiveMinSucceedDest = '1'
  DbFileNameConvert = 'emadbdg, emadb '.
  LogFileNameConvert = "/ opt/app/oracle/oradata/emadbdg, / opt/app/oracle/oradata/emadb '"
  FastStartFailoverTarget = "emadbdg".
  InconsistentProperties = "(monitor).
  InconsistentLogXptProps = "(monitor).
  SendQEntries = "(monitor).
  LogXptStatus = "(monitor).
  RecvQEntries = "(monitor).
  Nom_sid = "emadb.
  StaticConnectIdentifier = ' (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=emarn1) (PORT = 1521)) (CONNECT_DATA = (SERVICE_NAME = emadb_DGMGRL) (INSTANCE_NAME = emadb)(SERVER=DEDICATED)))'
  StandbyArchiveLocation = "/ opt/app/oracle/oradata/emadb/archivelog1.
  AlternateLocation = "
  LogArchiveTrace = '0'
  LogArchiveFormat = '% t_%s_%r.dbf '.
  TopWaitEvents = "(monitor).
  
  State of the database:
  ERROR
  
  DGMGRL > see the detailed database emadbdg
  
  Database - emadbdg
  
  Role: STANDBY PHYSICS
  State of destination: apply
  Transport delay: (unknown)
  Apply the Lag: (unknown)
  Real-time query: OFF
  Occurrence (s):
  emadbdg
  
  Warning (s) of database:
  ORA-16817: unsynchronized fast-start failover configuration
  
  Properties:
  DGConnectIdentifier = "emadbdg".
  ObserverConnectIdentifier = "
  LogXptMode = "SYNCHRONIZE".
  DelayMins = '0'
  Binding = "OPTIONAL."
  MaxFailure = '0'
  MaxConnections = '1'
  ReopenSecs = "300"
  NetTimeout = "30"
  RedoCompression = "DISABLE."
  LogShipping = 'ON '.
  PreferredApplyInstance = "
  ApplyInstanceTimeout = '0'
  ApplyParallel = 'AUTO '.
  StandbyFileManagement = 'AUTO '.
  ArchiveLagTarget = '0'
  LogArchiveMaxProcesses = "4"
  LogArchiveMinSucceedDest = '1'
  DbFileNameConvert = 'emadb, emadbdg '.
  LogFileNameConvert = "/ opt/app/oracle/oradata/emadb, / opt/app/oracle/oradata/emadbdg '"
  FastStartFailoverTarget = "emadb.
  InconsistentProperties = "(monitor).
  InconsistentLogXptProps = "(monitor).
  SendQEntries = "(monitor).
  LogXptStatus = "(monitor).
  RecvQEntries = "(monitor).
  Nom_sid = "emadbdg".
  StaticConnectIdentifier = ' (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=emarn2) (PORT = 1521)) (CONNECT_DATA = (SERVICE_NAME = emadbdg_DGMGRL) (INSTANCE_NAME = emadbdg)(SERVER=DEDICATED)))'
  StandbyArchiveLocation = "/ opt/app/oracle/oradata/emadbdg/archivelog1.
  AlternateLocation = "
  LogArchiveTrace = '0'
  LogArchiveFormat = '% t_%s_%r.dbf '.
  TopWaitEvents = "(monitor).
  
  State of the database:
  WARNING
  
  DGMGRL >
  DGMGRL >
  DGMGRL >
  DGMGRL >
  DGMGRL > output

  Alex Antony Samantha wrote:

  
  Head node

  SQL> archive log list
  Database log mode            Archive Mode
  Automatic archival            Enabled
  Archive destination            /opt/app/oracle/oradata/emadb/archivelog1
  Oldest online log sequence     65
  Next log sequence to archive   67
  Current log sequence            67
  
  SQL> select thread#,max(sequence#) from v$archived_log group by thread#;
  
  THREAD# MAX(SEQUENCE#)
  ---------- --------------
        1           925
  

  It is misleading to the column sequence, sequence of real number is 65 series, but it's beyond. Have you restored any old backup with the incarnation?
  When you perform incremental backups, is the current_scn in the two primaries and Eve was balanced?

  And the sequence number * 29 * is transferred from the primary to the standby (or) he has been removed from the primary?
  Perform the two methods.

  (1) SQL > alter system set log_archive_dest_state_2 = 'reporter ';
  (2) conduct 3-4 log switches
  (3) SQL > alter system set log_archive_dest_state_2 = 'enable '.

  and displays the alert log database and backup files.
  And you mentioned the hostname in the entries of the listener, if this entry is added in/etc/hosts? otherwise you can use the IP address instead of the host name and then reload the listener.

  second method
  (1) copy archives missing from primary sequence of 29
  (2) place manually and then perform a recovery
  or
  (3) retrieve manually

  And update with your conclusions after all these lists.
  Thank you.

• ashrpt - ORA-20200: samples of ASH NO exist for the DATABASE/Instance

  Hello guyes,
  
  Please could you help me with the generation of the report of ASHES? I have the stack on:
  "ORA-20200: NO samples of ASH does exist for the DATABASE Instance / '.
  
  I tried to find how to sample, but the only things I found is for statspack or awr.
  
  Thanks a lot :)

  redy007 wrote:
  sb92075:
  [email protected] > select * from v version $;

  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11 g Release 11.2.0.2.0 - 64 bit version of PL/SQL Production 11.2.0.2.0 - Production
  CORE Production 11.2.0.2.0
  AMT for Linux: Version 11.2.0.2.0 - Production NLSRTL Version 11.2.0.2.0 - Production

  The active Session history exists only in the Enterprise edition.