activate enhanced features
where can I find send from pc to tv?
Thank you for your message.
Send from PC to TV has been available for 2010 models of TV with Bravia Internet capability. The beta function is removed once the TV updated the system software (firmware) of 4.068 or higher. If your TV is a model 2010 with internet capability, please contact our Technical Support team to have one of our agents will guide you through to reactivate the function.
Note: The application is beta software and Sony assumes no liability associated with its use, performance, or misuse. The Send_from_PC_to_TV application is intended only for personal use with a home TV BRAVIA Internet and network. No technical support is available at Sony for this application, its installation or its operation.
Tags: Sony TV
Similar Questions
-
HP 15 - r250TU: impossible to activate DirectX features.
I can't activate the features of DirectX. Graphics driver PCI VEN_8086 & DEV_0F31 & SUBSYS_2213103C. pls help me
Hello:
It's the W7 x 64 graphics driver you need for this hardware ID:
This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.
File name: sp69589.exe
-
No 'enhanced features enable' under 'Network' in the XMB
Hello.
Just bought the Blue Ray BX58 disk drive model. Connected to the wireless router. You want to register the player to use with Netflix.
Follow-up to the guidance:
> Connect the device to the home network (done)
> Go to the XMB and highlight 'Network' (done)
> Scroll down to "Enable the enhanced features" (this is not there...)None of the other menu options in the XMB has this selection.
Please help.
Thank you.
Just tried a BX58 here in our area of laboratory and was able to update.
This update came out two weeks ago and can help solve the problems that you may have, try following the instructions at the bottom and install this firmware update using a USB key.
http://eSupport.Sony.com/us/Perl/SWU-do... dl = BDPBX58If this update does not try to reset your Blu - ray player to the factory, then connect via a LAN cable temporarily. If you are still unable to refresh content on the internet with a connection to the local network and the firmware updated plugged in while its still contact customer service and they may be able to help with your problems of network settings.
http://eSupport.Sony.com/us/Perl/suppor... dl = BDPBX58 -
Activate Windows features or Off is empty
I have this same problem with Win7 Ultimate. Activate Windows features or Off empty. UAC works correctly, I tried sfc/scannow and it found no problem, System Restore tried without success, haven't tried System Update Readiness Tool - nothing works. Still a Virgin.
Hello mf2310,
You can watch the following KB article dealing with your problem.
Click the number of the KB article to examine it.KB Article ID: 931712 -the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive the "0 x 80073712" error code when you try to use Windows Update
Hoipe this helps.
Sincerely,
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
When I click on open in RAW, this message keeps coming up. CAMERA RAW IS NOT ENABLED. Camera Raw edition requires a product calling it launched at least once to activate this feature. Help, please. What is c?
I don't really think it will work, but I have a vague memory of something like this caused by different versions of a file in Bridge and Photoshop. If you want to try it go in the bridge folder and find a file named Amtlib.dll and rename the original Amtlib.dll. Now, go to your Photoshop folder and find the file with the same name and copy it in the folder of the bridge. Now, try to see if your image will now open in Raw. If this does not work, go to the folder of the bridge, remove the Amtlib.dll and restore the original to its former name.
Terri
-
"I have a Mac and Adobe Bridge im come with" editing Camera Raw requires that a product calling it launched at least once to activate this feature. "How can I solve this problem
Yes, please check if you have Photoshop installed on your machine, if yes open it once so that you can edit your images in Camera Raw Utility in Bridge.
Also, you can update the camera raw plugin: Camera Raw of Adobe Photoshop CC and CS6 Installer
Let us know if that helps.
Kind regards
Mohit
-
I just bought a new PC and downloaded my Photoshop CS6 and bridge (that I bought in 2012). But when I try to open an image in Camera Raw, I get a message that says: Camera Raw edition requires a product calling it launched at least once to activate this feature. I've never seen this message before, and I don't know what to do. Can anyone help please?
Hello
Greetings!
Here's a similar thread: Camera Raw editing is not enabled. Camera Raw edition requires a product calling took lau
and a 'solution' that someone published online: http://www.youtube.com/watch?v=nzpGJRP-daA
Concerning
Jitendra
-
I got a message when I am in the bridge and trying to open in camera raw which indicates ' initial request of bridges is not active, bridge requires that qualifying a product is launched at least once to activate this feature ", this happens only when I restart my computer, in general it takes uninstall and reinstall everything and then execution of all updates , however it is wasting large amounts of any time I restart. There must be a solution. anyone?
photos open very well if I go directly to the photo shop. I have creative cloud and windows 8
Hi leahk74157299,
Make sure that your Camera Raw is updated: https://helpx.adobe.com/x-productkb/multi/camera-raw-plug-in-installer.html
It might be possible that you get this error because of activation problem if you receive the sign in the prompt on every launch of Photoshop.
Launch Photoshop and verify that you are connected by selecting 'buy this software' and then go to file > Browse in Bridge and try to open any image in Camera Raw.
Let us know if that helps.
Kind regards
Claes
-
When I try to open a JPEG file in Adobe Bridge I get the following message: "the original application of the bridge is not active. "Bridge that requires a product calling it launched at least once to activate this feature. What should I do for this problem to be able to open JPEGs in Adobe Bridge?
Open Photoshop first... or any program that you bought that included bridge
-
Error when to activate additional features Reader Extended
Hello
I created a form and look ok, but when I activate Reader Extended PDF-> additional features form giving an error message. How can I fix it?
Concerning
1. set debitamount to float fields
2. change the script of the GET the amount of the
var total = "";
If (!) ((Form1.Page1.table1.row2.total.IsNull))) {}
Total = form1.page1.Table1.Row2.total.rawValue + ",";
}
this.rawValue = total;
in
var total = "";
If (!) ((Form1.Page1.table1.row2.total.IsNull))) {}
Total = form1.page1.Table1.Row2.total.rawValue;
}
this.rawValue = total;
-
HOW CAN I ACTIVATE A 'FEATURE' IN PROGRAMS AND FEATURES?
I have restored my HARD drive a few months ago & now when I go to Windows programs features & highlight all programs, I have no additional info at the bottom of the screen on the program-it is-to-say-the website, the size of the program, etc. Is attached a screenshot of one of the programs highlighted. I would like to make a "copy" of the way it looked before that I did restore if necessary to make me more clear about the 'problem '. That you can tell me about this?
It looks like you use Windows classic folders. When used, the details pane is not available. To disable them:
1. click on organize > folder and Search Options
2. on the general tab, select Show Preview and filters. Click OK to save the changes.
3. you should now be able to check the details pane option in the menu available .
-
When I try to open a picture from the camera raw bridge it appears subsequently me "camera raw editing is not enabled" "camera raw edition requires that a product has been released at least once to activate this function, may l.
The Parent to Camera Raw/bridge software is Photoshop because the camera raw plugin is installed on your system with Adobe Photoshop.
Please open Photoshop and edit an image in camera raw by going into the filters and then open the bridge of file > Browse in Bridge and check if the option to edit your images in camera raw directly.
Also make sure that your camera raw plugin is the latest version see: Installer of plug in Camera Raw
Concerning
~Assani
-
Firefox 11 allowed drag-and - drop text and the other two programs inside the browser itself. in FF12, I can do neither. How to restore this function?
I had this problem too and couldn't add or move bookmarks either. If you have torbutton add-on installed, try disabling the addon. Perhaps it is caused by another addon
-
Im trying to open the camera raw and this message is coming
Yes, that would be the reason. Bridge CC is looking for another CC program.
-
How can I get the registration code to my KDL-40W600B?
Just like the title says, I have a new KDL-40W600B and have need the code of registration for some of the apps I would like to use. Instructions for a pop - up on the Web of Sony Essentials page is as follows: to get the Registration Code please make sure that your active internet BRAVIA TV is connected to your network, powered and active. Press the Home button on your remote control and access the network icon in the Xross Media Bar. Scroll to activate enhanced features and select it by pressing on enter. Look for the Registration Code to your BRAVIA TV. Evil.
Hi jeansebastienhamet!
Maybe you are looking for
-
Where can I find help on using my ipencil?
What apps work best? What is the process to take something (text, article) and annotate?
-
Impossible to select iPhone icon in the upper left corner of my macbook.
I am trying to sync my iPhone to remove the music that is unchecked in my library, but cannot select the icon at the top left to join the summary to the iPhone. IPhone icon is still visible. Is there a way to fix this?
-
2 non-equidistant curves of XY to plot against the other
Hello, I have a few points of recorded data from various sensors XY. Values of X are always the time stamp and the values are the values of the different sensor. Almost all XY curves start and finish at the same time (most less than a few seconds). I
-
Using the drive raised by svchost.exec
What is the likely cause of my laptop will "slowly" and Norton 360 reports that I have 'high Disk use by host process for Windows Services? Thank you
-
Z10 blackBerry, the camera cannot be started
I bought my z10 recently and upgraded to 10.1. Yesterday I tried to use the camera and got this error message: "could not start the camera" what should I do to start? Paul