Activate the touchpad while typing

Similar Questions

• HP Pavilion: activate the touchpad while typeing windows 8.

  Hi I have a Hp pavilion and I noticed that when I type my touchpad turns off... I heard one solution is to disable the check of palm, but I can't find this option. What is no idea what to do now please help!

  Hello

  SmartSense is almost identical to Palm check, so turn off should allow you to use the keyboard and the touchpad at the same time - just click on the "gear" beside SmartSense, adjust the slider to turn it off, click close and then click on apply to save the change.

  Another parameter in Windows 8/8.1 you can also check is as follows.

  In the bar of charms, click setting and select change PC settings.

  PCs and devices, and select mouse and touchpad.

  Under the touchpad, select "no delay (always enabled) in the menu dropdown.

  Kind regards

  DP - K

• Anyone know how to use the buttons on the touchpad while typing? (Windows 8)

  I've already solved the problem when I use the touchpad when typing, but not the buttons on the touchpad while typing, I really want to play this shooting game where I have to run and I can't shoot while running I have to stay still and push that I will be bitten by zombies does anyone know how to solve this?

  Have you already checked this option?

  

• Omen of HP: HP Omen control "Enable the touchpad while typing" resets on reboot

  Hey, I just got a new laptop HP Omen and it works for the large majority. However, I was annoyed buy the touchpad is disabled while typing (because it took a few moments to re-activation, making it difficult to edit documents quickly, jumping from one section to another). I have seen that there is a setting for this in the control of presage software and I enabled it, and it works temporarily. But when I restart the laptop, the setting is enabled is no longer, and you need to re - activate yourself. This doesn't happen to other settings, such a deactivation of the windows key, which remain after the restart, but isn't the touchpad setting. Is it possible to fix this?

  Thank you

  Thank you very much, I didn't know that this setting could also be found under the touchpad settings. I turned to SmartSense (detection of palm + keyboard delay) and it solved half of the problem. However, the touchpad settings don't also save on reboot. There were messages on this before, such as:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/Synatics-touchpad-v7-5-settings-not-saving-after-Windows-10/TD-p/5177065/page/5

  The final solution to this position, changing a value of resistry, worked for me, and now the settings remain saved. So thanks to you and which after.

• Satellite C850-1F2 - cannot activate the touchpad

  Hello

  Recently, I installed Windows 7 on my C850-1F2. For the installation to finish, I had to disable all unnecessary devices in the BIOS, including the internal pointing device/keyboard. After that, the installation went well and I subsequently installed all drivers (downloaded from Toshiba) manually correspondents.

  All devices can be installed and work properly - with the exception of the touchpad.
  If I re-enable the touchpad in the BIOS, Windows will not start. It just stops at 'Starting Windows' screen - not the gel (continuous loop animation), it will not simply continue. Starting in safe mode, it will also stop after loading all the drivers. I've had the laptop that works all night to see if I was just being too impatient, but nothing helps.

  Also, the system does not detect the touchpad. Manager devices displays only the USB mouse, that I have connected or anything. When you access the parameters of 'Mouse', the system will first ask me if I want to uninstall the Synaptics drivers. I have thus tried to reinstall the Toshiba and the generic Synaptics driver but no touchpad.

  If I use FN + F5 to activate the touchpad (while it is already disabled in the BIOS), I simply disable the keyboard. The touchpad does not work. However, I have to disable it again, then put the laptop to sleep and it wakes again so that the keyboard works again.
  Furthermore, if I reboot after using the fn + f5, again, the touchpad is enabled in the BIOS and Windows does not start.

  I'm really confused at this point. What Miss me?

  > For the installation to finish, I had to disable all unnecessary devices in the BIOS, including the internal pointing device/keyboard.
  I installed Win7 several times but I never heard of something like this and I've always installed when moved the BIOS default settings so I put t understand this theory and does not understand why you did that.

  In any case, if nothing works well I highly recommend to upgrade the BIOS to the default settings and then install the clean version of Win7. I hope you are using Microsoft original installation disc and not some self made things.

  I put t think that there is a magic trick that can solve your problem.

• How to activate the touchpad on Satellite A75

  I accidently turned off my Touch Pad on my Toshiba Satellite A75. Of course, this won't work - anyone can help me with the command to activate the touchpad.

  Thank you

  Sue

  How do disable you the touchpad?
  Have you used a combination of FN keys?

  Try to reverse this order using the FN + F9 key

• Will not activate the touchpad on Satellite A300-1I4

  Hello

  I disabled my touchpad when I had the Vista that achieved with the PC, but I formatted and installed Windows 7 top and now I can't seem to activate the touchpad.

  I tried Fn + F9 or through the Synaptics pointing device settings, but no luck.

  Stats:
  Toshiba A300 1I4 - PSAGCE
  Windows 7 Ultimate x 64

  Hello

  Have you created the recovery disc before you formatted the laptop?
  If so, use this drive, enable the touchpad, and then reinstall Win 7 ;)

  Have you tried to activate the touchpad in Control Panel-> mouse-> other devices?
  Check this too

  There should be an option that should control certain properties of the touchpad.

• I can't move my touchpad while typing

  I bought a laptop (HP g094sa) purple and have downloaded the 'minecraft' game in order to play the game, you look around (using the touchpad) and walking (using the keys w, a, s and d) I can't use the touchpad when using w, a, s and d. Please help me as soon as possible!

  Hello

  This problem may be caused by a touchpad setting which is intended to avoid any accidental activation - for example if your Palm brush the touchpad when typing.

  You can change this as follows.

  Open windows control panel and on the top right, next to the display by: select "large icons".  In the new page layout, select the entry of Synaptics.

  The hardware/software version will depend on real option that you're looking for (see the example below), but it is usually called 'check' Palm or Smart Sense'-disable this function and apply the changes.

  

  Kind regards

  DP - K

• How can I activate the touchpad

  Im getting message on the bottom of the page this touchpad is disabled.  Ifollowed instructions to less sensitive touchpad and the message says the touchpad works very well, but it's no t.   One last thing, I have a mouse that I use and it's only last week that t his message has developed and I can't activate the touchpad.

  Thank you

  Go to your device under 'mice and other pointing devices' Manager, double-click your touchpad, in the properties box, click the driver tab, there is a button to toggle it. I hope I could help

• How to ACTIVATE touchpad while typing?

  I have a HP Pavilion dv6.

  I want to play games that require you to move with some keys and aim with the touchpad.

  My touchpad has an AutoFix to disablde while I type well.
  I saw so many forum posts who are asking how to get touchpad to do what mine is doing and I can't find a forum that talks about how to enable it.
  I've looked everywhere in my control panel for an option to turn off this option.

  I want my touchpad still not working while I type, how do I change this setting?

  What you want to do is to move the PalmCheck parameters to a minimum. You will need to click Start, type "Mouse" in the search bar, click the mouse in the results of the research, click on the settings tab of the device in the mouse properties window, click the settings button, click the expand to score, the l' expand expand to sensitivity, select PalmCheck and move the bar in the upper right up to the Minimum , then click on apply.

• Satellite A300D - how to activate the touchpad?

  Hello world. I have a problem.

  When I used XP I turned off touchpad while I use the mouse. So I decided to install Win Vista and there is a problem. I forgot to activate it before reinstaling. This is why my touchpad does not work. The drivers are fine and I tried to reinstall, but it did not help. Everything works fine except that I can't turn on the touchpad.

  Any ideas how to do this?

  Thanks in advance

  Have you installed Vista using Toshiba DVD upgraders?
  The mouse works if you use an external mouse?

  When you install Vista with the recovery image you factory again and touchpad is not disabled by default. Check the FN + F9 option and do not forget the touchpad is not disabled.

• Qosmio X 305-how do to disable the touchpad when typing in Vista?

  There is a way in XP to put the key then typing an accidental shot of my sleeve did not send words entered in another place.
  I can't find a way to do this for my nice new Qosmio X 305 running Vista.

  Does anyone know how this can be done?
  I do not necessarily want to disable it completely, and I don't want to have to think whenever I start typing!

  Hello Kathy

  Try it please with FN + F9. This option is for the option enable/disable the touchpad.

• Satellite A300 - how to activate the touchpad?

  Hello

  I accidentally disabled the touchpad on my satellite A300. Can someone tell me how to re - activate it please.

  Hello

  Press Fn + F9 to turn it on.

• Satellite M35X-S163 - how to activate the touchpad scrolling feature?

  How to activate the functionality of scrolling on the touchpad of my laptop Satellite M35X-S163?

  Hello

  The touchpad scrolling feature can be enabled in Control Panel > mouse.

  You'll find the option but don t forget that the driver for the touchpad should be installed and you can find it on the Toshiba site:
  http://www.CSD.Toshiba.com

• My cursor jumps all over the screen while typing.

  Original title: TYPING PROBLEM

  MY CURSOR JUMPS AROUND WHEN I TAPE. I DID A SCAN BUT NO HELP.

  Ok. I use a Dell computer. I can only show how I do in my Dell computer.

  Basically, you need to perform the settings with touchpad you. He is too sensitive. When you start typing, you touched the touchpad inadvertently, and moved the cursor.
  Here's how I'd do...

  Right-click on a free space of the desktop > customize > mouse pointers > (this is where if you do not have a Dell PC, you may not be able to follow. But you should have an idea right after that).

  I click Dell Touchpad tab > Device Select > I would like to either click on 'Disable' under the Touchpad > or put a check mark on "Disable Touchpad when external mouse usb is present." > OK

  

  Another method >
  Click Touchpad > Touchpad settings > under tactile sensitivity, move the slide to the RIGHT (heavy)
  > OK

  

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.