Activate the TPM on Tecra Z40

Similar Questions

• How can activate the TPM on Aspire S7-391-9886?

  Hello

  How can I activate the TPM on Aspire S7-391-9886? I went into the BIOS and the option to activate it is always grayed out. I read, it was necessary to set an admin password before the option is available, but not luck. Any clue?

  Thanks in advance

  Marcelo

  Nice day

  I remember gotting to activate in the following way as well as on one of the machines.

  1. go in the bios under the Security tab

  2 create the user and supervisor password in the bios... Please do NOT play with the HARD drive password

  3. restart the computer and go to bios and check again

  NB: If its still grayed out, it means the bios supports, BUT the physical hardware is not present. If the physical hardware allows, then you can now activate it.

  Kind regards

  FReeZA

• How to activate the TPM (Trusted Platform Module) in the BIOS?

  Original title: activate the TPM in vista.

  Hello team MS,

  I use Win Vista Ultimate 32-bit operating system. I want to activate the TPM (Trusted Platform Module) for use bit locker drive E:\. How to enable the TPM in the BIOS. I use Intel 915 gigabytes - motherboard with 1.5 GB of RAM and a 512 MB graphics card. Please, I beg you. suggest me.

  Thank you

  Rahul

  Hello Rahul,

  What is the brand and model of your computer?

  I recommend you to consult the manual that came with your computer to activate the TPM (Trusted Platform Module) in the BIOS (Basic Input Output System) as the BIOS settings vary for each computer & it depends on the manufacturer of the computer. If you are not comfortable to run, you can contact the manufacturer of your computer for help.

  
  Note: change BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

  
  Reference: Overview of BitLocker Drive Encryption

  Hope the helps of information.

• Activate the TPM on Probook G0 470

  Hello

  I have recently purchased a 470 G0 Probook laptop and want to use Bitlocker for security reasons. I can't seem to activate the TPM and I can't see anywhere in the Bios. I have windows 7 Ultimate edition and update to the latest version of the Bios of your site.

  On the site, I see this laptop as having the TPM chip, but I can't see anywhere in the Bios.

  Thank you

  Hello:

  I am looking at the quickspecs and I can't find anything on a TPM chip included (which I find unusual for a business notebook).

  Normally, the TPM secure is listed under security features. I even did a search of words in the document.  Nothing.

  http://h18004.www1.HP.com/products/QuickSpecs/14588_div/14588_div.PDF

  Look in the Device Manager in the category of safety devices.

  If the laptop has a TPM module, it will appear in this category.

• How to activate the em64t on Tecra R10-116 to use 6 GB RAM

  Hello!

  I want to use 6 GB of ram on my laptop. In this case, I need activate the em64t functionality. I entered the BIOS configuration, but can not find the place where to allow him. Before I saw him...

  Hope someone will help me

  Hello

  As far as I know, that this option is not available in the BIOS and to be honest, I doubt that the BIOS would deal with the 6 GB.
  But why you want to have 6 GB RAM?

  The 4 GB of RAM is more than enough and I doubt that preinstalled applications exploiting fully the 4 GB of RAM

• How can I activate the TPM under a Pro (PAASC) Satellite A100 BIOS

  .. .or more precisely is this laptop, a TPM system?

  If this option is not available in the BIOS settings I assume that there is no module TPM on your Satellite Pro laptop.

• Tecra Z40 - A - win 7 blue screen of death (BSoD)

  I have 3 times the BSoD on TECRA Z40 - A experience running windows 7 64-bit English last month!

  No new hardware has been installed, only the Toshiba and Windows updates carried out official.

  I have attached two screenshots from the dump files, files that have probably caused the crash...

  BSOD appears due to serious system problems or malfunction of the equipment.

  I think first of all you should get the phone to the factory settings.
  If this does not help, the parties must be checked.

  I think RAM memory modules.
  It is very important and must be checked in the first place.

• ProDesk 600 G1 BIOS configuration of the TPM secure through the BIOS Configuration utility

  We have a range of devices, computers HP desktop and laptops in our environment.  Devices are all running Windows 7 64 bit and should have Bitlocker enabled, but we found that some were not encrypted.  So I am trying to set up a remote BIOS and Bitlocker config activate software that we can get out via SCCM and then embed in a task sequence image for new machines.

  I use the Bios HP Configuration utility to check a BIOS password is set and then activate the TPM chip.  I took a BIOS config output of each of our models and created a settings file that has all of the TPM associated parameters of all models.

  At the moment I run Setup BIOS utility manually for testing.  On all models I tried that works very well, except for the 600 ProDesk G1 SFF.

  When I run the utility on the ProDesk 600 G1 MFS, it says that I have managed to update the settings, and when I check the BIOS, the TPM secure has been unhidden and the TPM Management was given to the operating system (two settings I change), but the TPM itself remains hidden.

  It's the release of the BIOS configuration utility (it uses the 2.60.13.1 version, which uses plaintext passwords.  I also tried with the 3.0.13.1 later version that uses password files - same result)

  C:\ > BiosConfigUtility64.exe /cspwd: "password" set: "TPM_Config.REPSET"
  
  < BIOSCONFIG Version = "2.60.13.1" Computername = 'HP600G1' Date = "24/07/2014" Time = "13:01:37 ' UTC '1' = >"
  
  < SETTING changeStatus = "pass" name = "Embedded Security Device" reason = "' returnCode '0' = >"
  
          < OLDVALUE > <! [CDATA [hidden device]] > < / OLDVALUE >
  
          < NEWVALUE > <! [CDATA [device]] > < / NEWVALUE >
  
  < / SETTING >
  
  < SETTING changeStatus = "pass" name = "Enable security on the next boot" reason = "' returnCode '0' = >"
  
          < OLDVALUE > <! [CDATA [disable]] > < / OLDVALUE >
  
          < NEWVALUE > <! [CDATA [enable]] > < / NEWVALUE >
  
  < / SETTING >
  
  < SETTING changeStatus = "pass" name = "The BONES of on-board safety management" reason = "' returnCode '0' = >"
  
          < OLDVALUE > <! [CDATA [disable]] > < / OLDVALUE >
  
          < NEWVALUE > <! [CDATA [enable]] > < / NEWVALUE >
  
  < / SETTING >
  
  < SUCCESS msg = "Successfully set BIOS config." / >
  
  < information msg = 'BCU return the value' real '0' = translated = '0' / >
  
  < / BIOSCONFIG >
  
  C:\ >

  And after a reboot (where it should activate the TPM), BIOS shows as disabled built-in safety device (see attachment for the image).

  I have tried everything I can think of to get this to activate, including:

  • Different versions of the BIOS configuration utility
  
  
  • Remove the password from the BIOS and the application in the same order as the parameters
  
  
  • Different passwords
  
  
  • Reboot and allowing the machine to start completely to Windows before checking if the setting took effect

  I also tried to add the utility and the commands for an SCCM package and it works directly and as part of a sequence of tasks to see if that makes a difference, but nothing I've done has activated the TPM module.

  I know that the TPM module works, as you can turn it on manually and then Bitlocker can be applied to the machine, but with thousands of devices in our environment, I need to get this job without the need for manual intervention.

  Has anyone else had this problem and found a solution?  Or has someone at - he managed to activate the TPM on the SFF of 600 ProDesk G1 using the BIOS Setup utility?  Any ideas / suggestions would be very appreciated!

  P.S. This thread was moved from the company PC - Compaq, Elite, Pro for HP PC Client management. -Hp moderator of the Forum

  This problem has now been resolved by HP.
  
  They provided a replacement motherboard for the test machine I was using that solved this problem. I don't know what kind of motherboard failure could prevent the activation via the script TMP chip but not prevent activation through the BIOS menu, but as a replacement solved the problem, then it must be a hardware failure.

• How to activate the Tecra R80 - 144 sata 6GBs 3 for SSD

  Hello

  I have toshiba tecra r850-144 and I ssd but it does only have 3GBs why?

  What can I do to activate the full speed

  The SSD is maybe only 3 GB?

  Is which SSD?

• Tecra Z40 - Caught in the loop of pre-launch workspace Ironkey

  I have implemented an Ironkey with Windows To Go and managed to boot into it since several H.P. machines and even 3 years A.c.e.r.

  However, when starting on my Tecra Z40 - has, the workspace of pre-launch Ironkey load and shows the standard message that she is about to start on Windows and will restart.

  After this restart, it starts again in the same workspace Preboot screen, reboot, same message, same workspace.

  I guess there is something in the BIOS that needs to be changed to get this working, but have no idea what it could be.

  Ideas? Thoughts?

  I guess you try to start the system (Ironkey) external USB flash memory stick
  Well, to start a laptop equipped with the UEFI BIOS, first you must disable secure boot option. It is in the BIOS settings.

• Tecra Z40-A-12Z - frequent crashes in the morning

  Hello

  I have a Tecra Z40-A-12Z with 7 fully updated Windows (Windows Update AND Tempro).

  When the PC goes to sleep, very often, he refuses to wake up: sometimes the screen remains blank and I have to do a long press on the i/o button to force a shutdown and then it reboot. Or sometimes, I get a BSOD with 0x9f DRIVER_POWER_STATE_FAILURE message.

  Someone knows what's the problem?

  Hello

  I googled a bit around (error code) and there are a few hits in the google list.
  According to some people with this problem, the problem might be related to one of the drivers installed
  Probably one of the devices doesn't wake up upward or doesn't function properly after wake-up system. This can cause the BSOD.

  One of the users in the Microsoft community solved the similar problem, update the Intel graphics driver.

  I think you should check all the drivers maybe you should also get the laptop back to factory State and should test the functionality of the system immediately after that the laptop was recovered.

• Tecra Z40 - A - the upgrade (RAM RAM)

  Hi all

  Ordered little RAM to upgrade my Toshiba Tecra Z40 - A, but can not find, for the life of me, anything where you want to insert online.

  I previously installed RAM under the keyboard (couple of clips holding it) and on the other, a small cover on the bottom, but the Z40 does not appear to be anywhere easily accessible.

  Has anyone upgraded RAM on the Z40? Or is it a big no, no, because of the guarantee?

  Thank you
  Lance

  Memory upgrade on this model Tecra is a bit complicated and, in my view, should not be done by the owner of the laptop. For some models of Ram upgrade can be done by the owner of the laptop and exact instructions how do proposed in document s user manuals, but not for your Tecra.

  For full access to the RAM modules lower lid should be removed and it can be done by people of service only. If you do this alone you can void the warranty valid.
  I recommend you contact the nearest Toshiba service provider in your country and ask for help or advice.

• Re: Tecra Z40, Win 8.1 - malfunction of the fingerprint reader

  DESCRIPTION OF THE PROBLEM:

  My Tecra Z40 arrived with Win 8.1.
  From the beginning I couldn't use the fingerprint utility.
  When you access the utility won't happen for a while and then the error: "Could not connect to the fingerprint reader" has finally popped up.

  I could also not use the actual construction of fingerprints 8.1 Win (error: this device has biometric devices is not suitable). (PS mind that this built in function is now integrated into the subway and no device biometric parameters are not now present in the control panel to 8.1 win!)

  The problem has persisted despite the last fingerprint utility (which comes with the drivers) have been installed to win 8.1. 64-bit directly from the website of TOSHIBA and despite that a biometric device was still present in the Task Manager ("this device is working properly").

  SOLUTION:

  After literally weeks of research (including getting help from the shop and service Toshiba), I could finally solve the problem.

  I uninstalled the driver and the reader of fingerprints from the Device Manager (then only fingerprint reader drivers really disappear).
  Then I cleaned the registry (I used CC cleaner software) (or install new wasn't a reason any).

  Finally, I installed a Fingerprint Utility equivalent and the driver for Tecra Z50 (fp - sw - 20140605164020.zip) (which I expect to be using the exact same sensor)... and since then everything works fine.

  I can now access the utility of fingerprinting and fingerprint log on in Windows.

  SUGGESTION OF CORRECTIVE MEASURES:

  It seems the driver on Toshiba support website (I think for me it was the Poles) for my exact machine (made by TOSHIBA - detector.exe) is incorrect.
  To make matters worse the driver does not communicate useful information on his miss - fit in the Task Manager! If I had to recalculate, in money, as long as I have and a whole lot of support persons had spent on it, there really meaning to improve this list of drivers!

  (PS: one of the files in the same directory online regpatch has a virus (VIRUS A Yes) it has been recognized by Antivir!) -Toshiba, you can communicate with someone responsible for the Polish support site!)

  OUTSTANDING ISSUES:

  No fingerprints, login is possible in Mozilla or Internet Explorer despite the appropriate plugins have been installed as well as the utility of fingerprints, where the web password option has been activated. (no suggestion seems to appear to reach the service fingerprints for the sites that require passwords, maybe that your service gets blocked by popup blocking browser protection?).

  I'm really looking forward to this feature.
  Make sure that the plugins work correctly with the latest browsers.

  Greetings

  Hey thanks for this interesting thread and a detailed description.

• Tecra M5: How auto to activate the secondary monitor?

  Hello

  When I my Tecra M5 with full-screen dock and turn it on, I would like that it allows to automatically activate the secondary monitor and set it on the primary monitor. Currently, when home he doesn't - and I have to manually enable the second monitor and place it in the primary.

  Any ideas?

  Thank you
  Fraser

  Hi Fraser

  As far as I know it of not possible to set the external monitor as the main screen on startup.
  But what the graphics card is installed on your laptop?
  On the Toshiba site I found a new version of the Intel display driver.
  But is it possible to automatically activate the external display and set it to the main monitor without using the docking station?

• Tecra M5 - how to cancel the TPM

  Unwittingly, I activated the support of TPM on my M5.
  Now on very boot it tells me that the driver of the TPM module is loaded, but TPM is not initialized.

  I don't want to go forward with the TPM module, as I use different encryption provided by company.
  I can't work on how to cancel this installation.

  Any help is greatly appreciated.

  Thank you very much

  From my own experience, these settings can be enabled and disable ONLY in the BIOS.
  If the BIOS setting has stated that the TMP is off then would have confidence in it and I would like to say that this feature has been disabled!