Activate the transaction log for isqlplus sessions?
HelloHow to enable the transaction log for isqlplus sessions.
IM using oracle 9i. I want to know what are all the sql statements executed through plu isql.
Good help will be appreiciated.
Concerning
SankarMN
SankarMCA wrote:
HelloHow to enable the transaction log for isqlplus sessions.
IM using oracle 9i. I want to know what are all the sql statements executed through plu isql.
Good help will be appreiciated.
Concerning
SankarMN
You can enable auditing or go with LOGON trigger. LOGON trigger must check if the session is from isqlplus. If so, then enable tracing for this session.
Tags: Database
Similar Questions
-
How do you activate the mode debugger for xml publisher PeopleSoft
Hi all
How do you activate the mode debugger for xml publisher PeopleSoft
E-BI/XMLP: how to manage BI Publisher/XMLP in Debug Mode/Turn LOGGING reports? [Video] (Doc ID 821195.1)
-
Cannot start the managed server - unable to get the property of the transaction log.
I have a server that is managed in a cluster to a single member. The field is simple - server admin and a cluster, the cluster member.
I can boot is no longer this server. When I try to start, he left after the following message:
< BEA-000362 > < server failed. Reason: Failed to get the property of the transaction log. Make sure that the migratable Transaction Recovery Service is migrated on the current server before restarting.
I've checked everything I can think or offers documentation of the error. There is only one target migratable in the field, the managed server. automatic migration is not enabled. I deleted the store by default from the file system, and it gets recreated at startup (so not a problem of permission of system files). I have Activate Server registration to any Transaction scope weblogic debug debugging tab, no additional messages are coming around this message.
Target only shows migratable are hosted on the managed server and not the last migration status.
So I'm puzzled. Can anyone suggest what I should look at?
WebLogic 10.3.5, JDK 1.6.0_29 (64-bit), RHEL 5.6
Published by: SteveElkind on August 28, 2012 11:54Hi Steve,.
Then remove the cluster migratable option, it will sort your problem.
Kind regards
Kal -
Fatal error: unable to write to the transaction log
Hi people,
We get below error when I try to run my project in Jdev.
HTTP port conflict detected. The HTTP port is reassigned to port 9041.
JMS port conflict detected. JMS port is reassigned to port 9277.
[Departure OC4J uses the following ports: HTTP = 9041, RMI = 23896, JMS = 9277]
C:\JDEV\jdevbin\jdk\bin\javaw.exe-client - classpath C:\JDEV\jdevbin\j2ee\home\oc4j.jar; C:\JDEV\jdevbin\jdev\lib\jdev-oc4j.jar-Xbootclasspath/p:C:\JDEV\jdevbin\jdev\appslibrt\ojdbc14.jar; C:\JDEV\jdevbin\jdev\appslibrt\nls_charset12.zip-DFND_JDBC_STMT_CACHE_SIZE = 200 - DCACHENODBINIT = false - DRUN_FROM_JDEV = false - mx256m - Xverify: none - Doracle.j2ee.dont.use.memory.archive = true - Doracle.j2ee.http.socket.timeout = 500 com.evermind.server.OC4JServer - config C:\JDEV\jdevhome\jdev\system9.0.3.5.1437\oc4j-config\server.xml
[waiting for the server to complete its initialization...]
Fatal error: unable to write to the transaction log (/ C:/JDEV/jdevhome/jdev/system9.0.3.5.1437/oc4j-config/log/transaction.state), possible reasons are that Orion does not have permission to write to the file, or that another instance of the server is already running with this (more common) configuration: cannot modify the transaction log
Process has finished with exit code 1.
[Departure OC4J uses the following ports: HTTP = 9041, RMI = 23896, JMS = 9277]
C:\JDEV\jdevbin\jdk\bin\javaw.exe-client - classpath C:\JDEV\jdevbin\j2ee\home\oc4j.jar; C:\JDEV\jdevbin\jdev\lib\jdev-oc4j.jar-Xbootclasspath/p:C:\JDEV\jdevbin\jdev\appslibrt\ojdbc14.jar; C:\JDEV\jdevbin\jdev\appslibrt\nls_charset12.zip-DFND_JDBC_STMT_CACHE_SIZE = 200 - DCACHENODBINIT = false - DRUN_FROM_JDEV = false - mx256m - Xverify: none - Doracle.j2ee.dont.use.memory.archive = true - Doracle.j2ee.http.socket.timeout = 500 com.evermind.server.OC4JServer - config C:\JDEV\jdevhome\jdev\system9.0.3.5.1437\oc4j-config\server.xml
[waiting for the server to complete its initialization...]
Fatal error: unable to write to the transaction log (/ C:/JDEV/jdevhome/jdev/system9.0.3.5.1437/oc4j-config/log/transaction.state), possible reasons are that Orion does not have permission to write to the file, or that another instance of the server is already running with this (more common) configuration: cannot modify the transaction log
Process has finished with exit code 1.
Any solution would be greatly appreciated.
RambeauWhen you find a solution
Please indicate your question as answered.
You should also recognize replies to your thread is useful or appropriate using the buttons where appropriatePlease read more about the announcement: Please read this before posting
http://forums.Oracle.com/forums/Ann.jspa?annID=56There is no need to explicitly mention who responded to your question. You can score just as helpful or Correct answer.
Thank you
AJ -
User profile service... Help... I'm stuck and going nowhere.
Hello
Whenever my user try to connect this MSG poping up to the top of any solution please.
User profile service
you have been logged on with the default for the system profile, please see the the event log for more information or contact your administrator.
Click on this URL and follow the instructions 100% your problem has been resolved http: //support.microsoft.com/kb/947215
Try it.
-
Unable to activate the plug-in for WebStageView.
I couldn't activate the plug-in for a StageWebView using loadURL().
I use Flash Pro CC 2014 on Windows.
My environment variable are on:
AIR_ANDROID_SDK_HOME C\:\\SDKFile
ANDROID_HOME C\:\\SDKFile
These files are located in C:\SDKFile but according to Android Studio, the path is C\:\\SDKFile
I'm targeting Android SDK version 4.0.3 and uses a Samsung S3 with 4.4.2
This is included in the XML Application:
< android >
< / android >
Any idea what I might hurt?
var webView:StageWebView = new StageWebView (false);
webView.viewPort = null;
webView.dispose ();
webView = null;
webView = new StageWebView (false);
the 4 previous lines of code are superfluous.
webView.stage = this.stage;
webView.viewPort = new Rectangle (0,(100*Wscale), loaderSprite.width, loaderSprite.height-(100*Wscale));
where are the Wscale and loaderSprite defined?
webView.loadURL (URLVariable);
-
The system failed to flush the data in the transaction log. Corruption may occur.
I started to do a Blizzard of these warnings in my system error log. I want to eliminate them. Does anyone know how? Where exactly is this "transaction log"? The warnings are an event ID 57. Enjoy a preview.
Thank you.
H
.. just to rule out something:
You plug and/or remove an external hard drive on this system (or a USB flash drive)? Generally, this error occurs when you "surprise remove" year external hard drive which means having disconnected without disconnecting safely system properties.
-
Cannot read dvd OMP. DVD will not auto play and got an error msg stating that the plug-ins have been disabled. How to activate the plug ins? I can't reinstall/repair WPM 11 under Vista. I tried to update without success. I ran sfc / scannow and there are no errors, found no errors or corrupted files. Please indicate how do 11 WPM version 11.6002.18065 not work on my Vista Home Premium 32 bit OS! plug-ins have been disabled in 11 OMP
I have installed a codec pack k - lite with no luck!
Hi kikstart2,For the CD/DVD drive problem, try the following steps.
1. visit the following Web site, click the "Run now" button and follow the instructions in the wizard to run the tool: http://support.microsoft.com/gp/cd_dvd_drive_problems
2. once the tool is running, restart the computer.
3. Insert the CD / DVD and check if it works very well.NOTE: There is no option to repair/reinstall Windows Media Player on Windows Vista.If the problem persists, restore the computer to an earlier time when everything worked well. To do this, try the following steps.
1. Click Start, type system restore in the search box and press ENTER.
If you are prompted for an administrator password or for confirmation, type the password, or click on continue.
2. click on choose a different restore point and then click Next.
3. click on a date on which the issue moved not.
4. click on next.
5. click on finish.
6. check if everything works well.For more information see what is system restore?Kind regards
Syed
Answers from Microsoft supports the engineer. -
Impossible to activate the correction lenses for images
I try to get all the JPEGs, shot with a particular camera to have profile lens corrections applied to them. So with a jpeg that is selected in the development module I check on "Enable lens corrections" click setup and click "save new lens correction default profile." But it does not work. The next jpeg that I select is not activated lens corrections. Or it does not work if the setting to develop, I click on set default settings > update current settings. I think I have to activate the lenses to each image corrections. What I am doing wrong?
Settings that you did for images should apply to others or the images differently than what I understand, you were doing:
You say that you
update to current settings >. This means that you update your lens correction parameters (that you developed earlier) with the parameters of the new image (which does not have lens applied correctioons).
Instead, try the following - in the develop Module:
Once you have the frame for a picture, select more images without deselecting the first image (ctrl + click on the images more).
Your first image should have a light gray frame, other images, a slightly darker gray frame. This means that all images are selected, but your first image is active.
At the bottom of the right pane, click
. A dialog box appears that allows you to check the settings you want to apply to the other images. Check
or anything that applies in the case of sub-options of lens correction. Click
. Your lens correction should now be applied to other images - and also other parameters of development if you checked them. WW
-
Where can I find the installation Log for CS5 Web Premium
Windows 7 64-bit can someone please indicate the directories where I can find the Setup log file that records what is installed and where everything is placed when CS5 Web Premium is installed first. Thank you.
http://kb2.Adobe.com/CPS/844/cpsid_84451.html
Mylenium
-
How to activate the Clipboard sharing for shared virtual computers?
Hi guys.
Important note: this is VMWare Workstation.
When I share a virtual machine in order to other guys in the network can control it, I lose the following capabilities:
* the Clipboard sharing via VMWare tools
* file drag and drop via VMWare tools
* possibility of mounting isos of MY system from LOCAL FILES on the virtual computer DVD drives
Someone knows how to re - activate these features?
Many thanks in advance.
You obviously not bothered to read the documentation! Here are some excerpts, referring to shared virtual machines...
NOTE You cannot change to a shared virtual machine or remote model mode.
Configure updates of specific for a Virtual Machine VMware tools...
Use the VMware Tools default update behavior. The default behavior is defined in the preferences of the workstation.
NOTE You cannot configure this option for a shared virtual machine or remotely.
NOTE You can enable or disable drag - move to a shared virtual machine or remotely.
NOTE You cannot enable or disable copy and paste functionality to a shared virtual machine or remotely.
NOTE You cannot enable a shared folder to a shared virtual machine or remotely.
NOTE You cannot map a virtual hard disk to a shared virtual machine or remote.
NOTE You cannot add a printer to a shared virtual machine or remotely.
NOTE You cannot configure a virtual machine shared or remote to display all USB input devices.
Take or return to a snapshot at Power Off
Take a new snapshot
NOTE You cannot configure this option for a shared virtual machine or remotely.
Configure power and control power settings Options
3. Select a power option.
NOTE You cannot configure these options for a shared virtual computer or remotely.
6. Select the setting for the start control.
NOTE You cannot configure startup for a shared virtual machine or remote control settings.
NOTE You cannot configure a shared or remote virtual machine as a VNC server.
NOTE use Workstation 10, you can change the hardware compatibility of a shared virtual computer or remotely. However, you cannot in low grade a virtual machine created previously.
NOTE This command is not available for shared virtual computers, or remotely.
Clean a VHD on Windows hosts
Unlike the command to defragment and the shrink command provided by VMware Tools, clean it from the order of discs requires no any additional disk space on the host computer. Clean the disks command works directly on the files of virtual disk (hard).
NOTE This command is not available for shared virtual computers, or remotely.
Add a USB controller to a virtual machine
NOTE shared and remote virtual machines are created without a default USB controller. You can add a USB controller manually when you have finished creating a shared virtual machine or remotely.
4. set the USB connection settings.
NOTE You can not usually set up USB connection to a shared virtual machine or remote settings.
NOTE You cannot add a physical drive to a shared virtual machine or remotely.
NOTE You cannot add a generic SCSI device to a shared virtual machine or remotely.
NOTE You cannot configure the virtual keyboard improved to a shared virtual machine or remote setting.
NOTE You cannot configure advanced settings of the virtual adapter to a shared or remote virtual machine.
-
Activate the serial number for Acrobat 9 Pro DC
I have Acrobat Professional 9 and just buy Acrobat Pro DC. I can't enter my serial number for 9, to activate. I've been very clear with the sales rep that I got 9 # update.
help, it is simply not what it was.
you need a refund,
http://helpx.Adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
http://helpx.Adobe.com/x-productkb/global/phone-support-orders.html
Acrobat 9 is not eligible for upgrade pricing. the table below, including the final two sentences:
-
Satellite L300 and win 8 - How do I activate the Fn key for touchpad?
Hello
How can I Activatet key FN + F9 to the touchpad in Windows 8.
My laptop is Satellite L300 (PSLB0E).Any Solution for me?
THX
I didn t doing experiments with Win7 on old and not Win8 models supported but I m 100% sure that this old piece of hardware is not supported for Win8, so it can be problematic.
Did you have a clean installation or upgrade Win7 Win8?
-
How can I activate the mode standby for apps?
Since I have updated to IOS 9.1 sleep or the stand-by mode for apps stopped working. I had manually disable my IPad. Before it turns off after a minute, now it stays on all the time run down my battery. Someone please help
Have you checked the settings > General > self-locking > set to 2 or 5 minutes.
-
Add the windows firewall with the security log for windows 2008 Event Viewer
Hi all
I would like to see weather which is turn on the Windows or turn OFF firewall and at what time on Windows 2008.
As what I had checked, I could see this on Windows 7 (Event Viewer/Applications and Services/Logs/Microsoft/Windows/Windows Firewall With Advanced Security/Firewall), but this does not show on Windows 2008.
Is anyway to add this in Windows 2008?
Your help is very appreciated.
BR/WT.
Hi all
I would like to see weather which is turn on the Windows or turn OFF firewall and at what time on Windows 2008.
As what I had checked, I could see this on Windows 7 (Event Viewer/Applications and Services/Logs/Microsoft/Windows/Windows Firewall With Advanced Security/Firewall), but this does not show on Windows 2008.
Is anyway to add this in Windows 2008?
Your help is very appreciated.
BR/WT.
Best place to get the most appropriate response is technet...
Please repost this under, http://social.technet.microsoft.com/Forums/windowsserver/en-US/home
Maybe you are looking for
-
I can't get rid of sweetim, I have to go back to microsoft ie
I can't get rid of sweetim, I have to go back to microsoft IE, I tried everything.
-
I want to commendate the efforts of Toshiba for the makeover of the internet support page, update the drivers (Win7) and the general support in the forums. Klemen
-
HP dv6 7010tx: Laptop stolen
my laptop has been stolen is there a way I can go back... Please help me...
-
Can't send or receive messages for the Hotmail (sallymax) account.
Can't send or receive messages for the Hotmail (sallymax) account. To send and receive messages in your Hotmail account, go to http://hotmail.live.com on the Web, or try again later. To get help from Windows Live Customer Support, go to http://suppor
-
How to set the data in InvokeQuery?
I seem to be unable to set the data property into an InvokeQuery. I have the following code... Invocation { id: shareInvoke query: InvokeQuery { id: shareQ mimeType: "text/plain" data: ["TEST"] invokeActionId: "bb.action.SHARE" } } Yet, every time I