activation after you have moved the hard drive to another computer to office

Similar Questions

• Windows XP start error after access to the hard drive from another computer

  Computer laptop Windows XP went bad because of a bad graphics card.  Bought a new computer at the same time with Windows 7.  Pull the hard drive of the laptop to get the files back.  Had to change the permissions to grant access.  Now when I try to start the windows XP laptop, I get a "windows cannot load the user's profile but you has logged on with the default profile" and then a "windows Explorer has encountered a problem" appears and I can't do anything with it.  When I select 'close' the screen goes gray, then the same message appears.  I have to use the Task Manager to restart.  I did a repair of my XP install disc and also a system restore and still the same problem.  Help!

  Also, running service pack 3 before the repair.  Now on service pack 2 that I cannot access windows update to get updates.

  Computer laptop Windows XP went bad because of a bad graphics card.  Bought a new computer at the same time with Windows 7.  Pull the hard drive of the laptop to get the files back.  Had to change the permissions to grant access.  Now when I try to start the windows XP laptop, I get a "windows cannot load the user's profile but you has logged on with the default profile" and then a "windows Explorer has encountered a problem" appears and I can't do anything with it.  When I select 'close' the screen goes gray, then the same message appears.  I have to use the Task Manager to restart.  I did a repair of my XP install disc and also a system restore and still the same problem.  Help!

  Also, running service pack 3 before the repair.  Now on service pack 2 that I cannot access windows update to get updates.

  You have another administrative user you can connect to the system with and change the owner and permissions on the folder Documents and Settings of the other user with?

• How to connect all the image after you have moved the records?

  I have a lot of illustrator files in folder A and each file has tons of images from different folders (B, C, D). All of these files are inside a main root folder.

  Recently I moved this folder to an external hard drive, then all the illustrator files disconnect with the images. Is it possible to connect all these pictures all together instead of recreating a link one by one?

  Thank you!

  you open a file HAVE, when you get the dialog box "cannot find the file related ABC...". »,

  -Check the box 'apply to all '.

  -Click the 'repair '.

  -Navigate to the location of the new ABC file

  All images must automatically be relinked

  You would need to repeat for each file HAVE

• Wi - Fi Elitepad 900 died after you have installed the latest driver Atheros HP.

  The Wi - Fi on my 900 Elitepad (Win 8, 32-bit) works well in the past.  But recently, I am constantly Wi - Fi 'limited connection' and that 'no connection' emits intermittently.

  And I went to the download page of the HP driver, installed the last "Qualcomm AR6000 Driver Atheros Wireless LSN series" (SP61232, ver.3.7 of March 22).  After installation, the Wi - Fi connection goes dead.

  In the lower status bar, the Wi - Fi icon is always displayed with a red & white and does mean 'no networks detected'.

  In the section 'wireless devices' menu 'Settings of PC' Win 8, the Wi - Fi button disappeared altogther, even if she was still there before the update of the driver.

  In the "Network connections" window of Win 8, the Wi - Fi icon is displayed as 'active', but a better connection returns the message that "there could be a problem with the driver for the wireless adapter.

  In the "Device Manager", the Qualcomm Atheros AR6004 adapter shows that everything is normal and work, even if it is obviously not.

  For the 'ipconfig/all', the Wi - Fi section does not even appear in the result.

  I've uninstalled and reinstalled the old and new Wi - Fi drivers several times above, but Wi - Fi is still dead.

  Help, please.

  Problem solved!

  I had to uninstall all the drivers Atheros Wi - Fi in the Mode without failure Windows, restart, then CNettoyez in the normal Windows mode, restart, and then finally reinstall the latest driver in Mode Windows safe.

  Now the Wi - Fi is back running.  But I have to check if the Wi - Fi BOUNCING 'limited connection' or 'no connection' not coming back or not, with this latest HP driver.

  It must be one or more of the following applications installed that prevented the WiFi driver install correctly in the first place:

  The AVG antivirus,

  ZoneAlarm firewall,

  CNettoyez,

  Malwarbytes anti-malware.

• Help my pc does not start after you have uninstalled the video driver

  Please help my pc usually start more after I uninstall my nvidia driver mx/mx 400 with YourUninstaller I try to use this option to uninstall my driver in super mode then prompt YourUninstaller and asked "do you want to restart your computer now" then I click Yes but YourUninstaller software now on the race because the YourUninstaller has finished remove the registry left behind by uninstalling normal after that there is no register found after scanned. Then I click Next, then I closed this request. Then I restart my computer manually but blocked windows then I wait 5 or 10 minutes, but do not restart Windows. I turn off my APR, then I turn on my pc then windows does not start. I try to reformat but it's the same story that windows does not start. I try to remove the cmos battery hoping it will solve then it works. But the problem is that I insert my bootable cd, it runs automatically even I don't not press a key on the keyboard, the process to continue installing windows, it sounds I can not install my windows correctly. When he restrart the process goes again to load all the drivers everywhere why did this happen? Is there something wrong with my HARD drive once I used YourUninstaller?

  RAM of a problem with you, I guess. Remove the RAM and clean including the slot of the motherboard.

  http://www.computerhope.com/beep.htm

  If this post answers your question, click mark as answer .

• Questions after you have moved the directory \temp Win.

  I just got a new computer with a SSD boot drive where programs are installed.  I move the Windows temp directory (Windows 7) to the secondary drive to avoid much of the writing on the SSD drive.  This has caused problems with Photoshop CS6.

  The first problem was the opening of the program.  I would like to get a "cannot open cache file' then 'failed to initialize the cache file".  This was solved by changing the properties to "Run as Administrator".  It works, but dang I get this stupid user control dialog box every time.   The question here is; is there another way to deal with this?

  Second problem.  I notice that I can are more made drag an image from the Win Explorer to the photoshop work area.  I have to go really OPEN the file in the file menu.  I can't even click with the right button on the file and choose open.  Major concern.

  Thanks for any help for this.  I hope that I can't back up the temp directory.  There may be an environmental variable that I can add to Windows?

  Thanks to a bouquet.

  Sue

  Looks like you're updating all the registry entries that point to the temporary directory on the system, and Photoshop was trying to access the old location.

• ORA-27037 standby after you have moved the primary files

  I'm under Oracle 11.2 with a physical Data Guard configuration primary and standby on Solaris 10.  Asked me to move all the files belonging to the primary to a new mount point.  This includes the datafiles, tempfiles, ORLs, litigants and the controlfile.  On the main file system files were located on /u07 and are now on /u03.  Pending files are on /u07.

  Here's what I did:

  Cancel managed recovery and stop in standby mode.

  Judgment of the primary.

  A file system has copied on the primary /u07 to /u03.

  Control_files primary init.ora file parameter to point to the new location on /u03 and change log_archive_dest_state_2 = DEFER

  Renamed the primary spfile with a ".bak" then primary would begin by init.ora file.

  Elementary school:

  startup mount;

  Run A SQL script to rename the data files, tempfiles, ORLs and SRls to the new location on /u03.

  ALTER database open;

  Create spfile from pfile;

  stop immediately;

  start-up;  (so primary is now started with a spfile)

  Standby:

  Change these two lines in the init.ora file:

  *.db_file_name_convert='/U03/oradata/mydb/','/U07/oradata/mydb /'

  *.log_file_name_convert='/u03/oradata/MYDB/log','/u07/oradata/MYDB/log_ '

  Note: When Eve was created first, someone created the ORLs with a different name of the primary.  For example, major newspapers are named log1a, log2a and log3a.  The day before, they are named log_1a, log_2a and log_3a.

  Renamed the spfile Eve with a ".bak" then Eve would begin by init.ora file.

  bootable media;

  At this point, I have seen these errors in the standby alert log:

  Errors in the /oracle/diag/rdbms/mydb_stby/MYDB/trace/MYDB_lgwr_27569.trc file:

  ORA-00313: open failed for the members of Group 3, Journal of thread 1

  ORA-00312: wire 3 1 online journal: ' / u07/oradata/MYDB/log3a.dbf'

  ORA-27037: unable to get file status

  SVR4 error: 2: no such file or directory

  Additional information: 3

  ARC3: Started archiving

  ARC0: FROM PROCESS ARCH COMPLETE

  Here are my questions: why is the database ensures looking for online newspapers as they are named in the primary?  (Without the underline in the name)

  Should I have set STANDBY_FILE_MANAGEMENT = MANUAL on the primary and standby and renamed implementing the ORLs in the standby?

  What I ended up doing was closing the day before and rename the ORLs on the filesystem depending on how they are named on the primary.  Then, the day before, I did:

  startup mount;

  change retrieve in database managed automatic standby database using the current log file disconnect from the session;

  Then, on the primary, I did: alter system set log_archive_dest_state_2 = ENABLE;

  Everything looks OK, which means, newspapers are shipped from the primary to the standby and applied on the day before.

  I wonder, what would I have done differently to avoid first encountered this error?  Also, is my valid Eve at this point?  I see no problem in the primary alert log or journal alerts in mode standby.

  Mimi Miami wrote:

  Thank you, CKPT.  Now, I understand my misunderstanding with the log_file_name_convert parameter.  The parameter is used to convert file locations of the ORLs on standby, not the name of the file of the BDL himself, correct?  Knowing this, would it not imperative that the file is named game?  In other words, I can't have an ENT named log1a on the primary with his match on the eve log_1a appointed, right?

  Yes, setting gives way where to redirect the log files, but what happens if the mentioned directory does not exist on the database pending?

  As on previous day $ls ltr - / u07/oradata/MYDB/log_

  When there is no available pending directory as you have not mentioned in LOG_FIILE_NAME_CONVERT then it cannot translate the strings either.

  File names, you can have anything but basically LOG_FIILE_NAME_CONVERT is here to rename the log files if there are in different places.

• BlackBerry smartphones recover memory after you have moved the files in Media card

  I inadvertently saved photos and videos to the device memory.  When I discovered this I moved the files on the media card, but the space in the memory of the device was not released, although the image and folders in video memory show no file.  All solutions?   I am running OS 5.

  "Memory" is basically a multimedia card shipped.  It is memory separate from your "Application memory".

  I just want to perform a full backup of the device with Desktop Manager.  Wipe the device in the Options > Security Options > Security wipe.  Then restore the backup.  That will probably bring your memory asks how far it was.

• I moved my hard drive to another computer and once connected to windows told me that I need to activate windows?

  Once logged into windows, it tells me that I need to activate windows. I click Yes to activate and it tells me that windows is already activated, click OK and it returns me to my log in page over and over. Why? and what to do about it?

  Because you are allowed to install and activate Windows on ONE computer and product activation has now determined that you try to use the installation on another computer.  If it is a retail version of Windows XP and if you move the installation to new hardware call Microsoft and explain the problem.  If it is an OEM version, like a Dell or HP installation and if you move it to another computer that you are to the top of the Creek with this, you are not allowed to move an installation OEM on another computer, it is linked to the computer on which it was sold with and he will die with this computer.

  John

• Why do I get a message "driver conflict detected" after you have installed the latest driver.

  I got the impression ink levels display problems.  So, I decided to run the latest software to print and Scan doctor.  Of course, diagnostic tests detected a driver problem and displays a message "Driver conflict detected.  So, following the instructions, the driver has been uninstalled and new software has been installed by using the latest version of the driver full and another software installation.  After this has been done, diagnostic tests was performed again, guess what, same message.  The next timeI just installed the driver installation package.  The diagnosis was made again.  Guess what, same error.  Well, after a few hours trying to find another driver for a 64-bit computer to Windows 7 and looking for an uninstall program different, I gave up.  Oh, the other problem is repeated 'offline' messages on my wife, WIFI connection to the printer. No problem has been fixed.   Does anyone have a solution?

  Thank you-

  That solved the problem for the USB connected computer. The wireless computer works correctly.

  Thank you very much for the help.

• SRM does not start after you have moved the database

  We're under 4.1 SRM and moved its sql database to a new server sql (new server sql a different host name).  We moved successfully to the virtual center & Manager Update bases sql data, but after moving srm4.1 database, the srm service does not start...

  so far, I uninstalled SRM (DO NOT remove the SRM database)... After uninstalling SRM, I rebooted the server.  Then I have re-directed the SRM installation and started going through the installation of MRS... After pointing the SRM installed on the server vcenter, port 80, and pointing to an existing sql database, etc., I get a thumbnail of certificate message and a prompt on the creation of a new certificate, which i say 'yes' to... Installation continued on and arrived at the end when it says "create certificate"... then does not say "cannot install the certificate...". Database error has occurred. "At this point, the installation failed

  Any ideas on how to remove the old certificate or work around this error?

  Thank you

  I think the error message is misleading in this case and the problem is not related to the certificate.

  I still think that it is permission DB / configuration number.

  Following links may be useful:

  http://communities.VMware.com/thread/212157

  http:// http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1015883

  Michael.

• Virtual machines are not able to access the network after you have moved the host

  We moved our 4 ESX host to a different physical switch and now our VMs cannot access the network.

  I can access the host via client vsphere.  Our host has 2 network cards.  They are both members of the vSwitch0.  I have 1 VM network defined, and they are both members of it.  The network adapters, vmnic0 and vmnic1 are also part of my VMkernel which I do not know that I need because I have 1 ESX Server and do not use iscsi or NFS.

  the two cards are also part of my service console.

  According to my host "configuration / display: vitual switch, it looks like all my virtual machines are defined to use the vswitch."

  the two physical network adapters is connected to the same switch.  I did not go to any configuration on the switch.

  

  The steers would be appreciated.

  Thank you

  Paul

  

  Welcome to the community,

  It sounds as if the physical switch ports are not configured correctly. Please check that port security is disabled on the switch (switchport mode access) ports and spanning tree portfast is (if any).

  André

• Advisior segment showing only not USERS tablespace fregmented after you have moved the image

  All,
  
  OK, I did a simple test to see if the segment oracle Advisor will report whether the tablespace is fragmented or not.
  
  I had a tablespace USERS with about 9000 pictures and took about 2.2 GB in size. I created new tablespace to hold all the images and moved these images of USERS to my new tablespace. After that, I thought that my USERS will be very fregmented, because he settled on 2.2 GB of data. I ran Advisor segment on all areas of storage. However after viewing all DBA_Advisor views he didn't complain of the LOB segments of USERS tablespace.
  
  Am I missing something here?
  
  Thank you

  But still my USERS is fregemented correct?

  What metrics to what value quantifies the 'fragmentation '?

  How can I recover this wested space?

  The space is NOT wasted & there is nothing can be recovered.
  The vacant space will be reused when new data are inserted to the remaining users tablespace tables.

• Mail.app rules prevent any actions after you have moved the message

  If the rule in the Mail.app contains action Message go to any folder, then all the other measures of the rule does not apply automatically. Only if I hit the rules manually.

  If I remove this action, then other actions of the rule will be applied automatically.

  It is similar to the document the behavior, but again, it is a rule in Mail.app, not the rule in the mail server.

  Why is this? Is this a bug? Is it possible to fix it?

  Here's similar question more then there is still no response year: ly http://apple.stackexchange.com/questions/168621/mail-app-rule-works-only-partial

• How can I access my personal files of XP by plugging the HARD drive to another computer?

  Windows XP installed a updated my XP Thursday and prompted me to restart. When I did and windows tried to start again, he immediately projected blue. If I try to start in one of the different safe mode options, the system hangs and stops loading at all. So, basically, I can't access my files.

  I just tried to connect up to another XP machine using a docking station USB for SATA drives and I can see the fine in car and home folders, but it won't let me access my user files "C:/documents and settings / ME", saying that I do not have access. I have a click right and searched around in properties options but can't see a prompt to put in my old XP password for access. Of course, this should be possible somehow, can anyone offer advice?

  http://support.Microsoft.com/kb/308421

  --
  ..
  --
  "The Wicker Man" wrote in message
  News: eb2b99e3-5ef0-4aaa-acb7-5f94acc16d40...
  > Windows XP installed a updated my XP Thursday and prompted me to
  > restart. When I did and windows tried again, it starts immediately
  > projected blue. If I try to start in one of the different security options
  lie, I can't
  > access my files.
  >
  > I just tried to connect up to another XP machine using a USB docking station for
  > SATA drives, and I see the fine in car and home folders, but it
  > don't let me access my user files "C:/documents and settings / ME."
  > saying that I do not have access. I have searched around and right click
  > the properties options but can't see a prompt to put in my old XP password
  > access. While this should be possible somehow, anyone can provide one
  > advice?
  >