Activation input HDMI on Toshiba 40TL868

Similar Questions

• My laptop Toshiba there input HDMI?

  My laptop Toshiba there input HDMI?
  I was wondering because I want to play my xbox one on it.

  If your laptop has only one HDMI port, then this is an HDMI output port.
  Only certain models Toshiba Qosmio bit supported two ports (IN/OUT) HDMI in the past

• HDMI / HDMI to Toshiba large computer screen does not just work... why?

  Laptop will use a HDMI to Toshiba cable with no problems...

  HP ENVY 23 will use a HDMI cable and have problems with Toshiba...

  The HP ENVY 23 is compatible with the Toshiba...

  Geek Squad said that they were able to connect using an HDMI cable... little matter!

  Thanks for all the support

  sudsE

  I found the post with the same question... YEAR and NOT INTRODUITS HDMI OUTPUT port only...

• Certification on Tandberg Ex90 input HDMI HDMI standard.

  Hi all

  Recently, our client is using the mooring of the PC as a with the Tandberg Ex90 HDMI input, however, defective with the docking of Tandberg Ex90 is relatively high (about 15%). So, we discussed with the seller of mooring, and they would like to provide us with the HDMI from the Ex90 standard certification.

  Anyone know the details of the certification Standard of Tandberg ex90 device?

  Best regards

  Ben

  Hello

  can you give us a detailed care of the used docking station?

  Do you mean after the docking station is connected, the input HDMI 1 becomes unusable?

• Black screen using a drive Blueray or DVB - T receiver as input HDMI device

  We have a problem with our Cisco Telepresence profile 65 double (C90, MultiSite, NaturalPresenter, Premium, Firmware TC5.1.4.295090 resolution):

  Using a camera document connected via HDMI (as a source of entry "DVD"): works well.

  Using a receiver DVB - T connected through the same HDMI input (like "DVD" input source): black screen

  Using a Blueray Sony player connected via the same input HDMI (like "DVD" input source): Watch the Sony boot animation when you turn on the Blueray player, then: black screen

  Seems to be a problem with the Codec. When it is connected directly to the HDMI the screen, the Blueray player works well.

  Any suggestions to fix this?

  Manual

  Hello.

  HDCP is a capability in handling handling the HDMI chip.

  I don't beleve not support the codec that have. It's beeing encryption sent by the blu - ray, and codecs does not contain the decryption feature.

  Marius

• Input HDMI, good video, no audio - M17x R3

  Hello

  I've had my computer for a year now and I'm now trying to use it with my PS3 through the HDMI input.

  I was able to get the video, but none of my attempts to get the audio working, worked.

  I tried to do the registration method, update driver IDT, nVidia Driver, everything that I could find.

  In the nVidia control panel, 3 options are shaded out and not usable.

  I changed the audio from the PS3 to see if this would have an effect, it only has done it.

  Help, please!

  Try this... right click on the volume icon in the taskbar...... open to recording devices select input hdmi... them go to properties, then on the listen tab... nd select "listen to this device"... hope that helps :)... it worked for me

• No sound from the HDMI connection Toshiba Bluray player BDX2100

  Hello

  I'm a newbie so I don't know if I'm in the right room or not, I want to ask that I have a Toshiba Blu Ray player model number or to number BDX2100 I have set up my fine reader TV and blu ray.

  There is one thing when I play my TV to HDMI 1 or 2, the image appears but there is no noise at all when I go on the Blu Ray in the audio settings menu it says 2nd audio or something to do with the HDMI is turned off.
  Oh I'm 100% sure and my tv is Sharp Aquos LC-22LE320 is not the TV because when I put the SCART lead in or put it on AV it works fine.

  The only problem is the sound with HDMI connection. If anyone can help, it will be very happy because it has been me bloody crazy.

  -musicman1982

  Hi mate

  It is a Toshiba computer / laptop computer forum.
  You will meet people who want to talk about options for laptops and Toshiba laptops.
  I doubt anyone here would be able to help you with this drive blueray.

  But in your case, I would first check the settings of the TV you.
  Check whether the sound via the HDMI port is enabled.

  > in the settings audio, it says the 2nd audio or something to do with the HDMI is turned off.
  I don't know why 2nd audio is mentioned there but maybe you should check if you can switch this 1 audio (audio main stream) m

  I recommend also consulted this blueray Player user manual.

• Cable HDMI to Toshiba GigaShot 40

  Hello

  I bought Gigashot camcorder and a new TV with an HDMI port.
  The port HDMI of camcorder Toshiba GigaShot 40 is thinner than the cable for my TV.

  First: it's a real HDMI port? or an i-Link/Firewire port?

  Second: How can I use this Port of camcorder HDMI to connect it to my TV on the HDMI Port to my TV?

  Third: where can I buy Options/accessories for my Toshiba GigaShot 40 camcorder?

  I live in FRANCE.
  Thank you for your attention.
  Concerning

  Hello Dragon2010,

  your questions:

  -first: Yes it is a real-HDMI port but it is a Mini HDMI port.
  -Secondly: If you need a "Mini-HDMI to HDMI Cable. It s not included.
  -Third: you can buy options in the stores of electronics like "Media Markt" and so forth, but the best way is about the www.

  hope this helps you

  Best regards

• HDMI on Toshiba L450D-12 X - Windows XP

  I'm going to do a fresh install on my Toshiba L450D - 12 X and I will install XP. My laptop will support HDMI using XP?

  If there is a driver could you please give me the link. Here's the site with all the specifications
  http://UK.computers.Toshiba-Europe.com/innovation/JSP/SUPPORTSECTION/discontinuedProductPage.do?toshibaShop=false&service=UK&PRODUCT_ID=1084336
  Thank you
  JK

  Hi JK,.

  It should support even after you it downgrade to Windows XP. I suggest you to contact the manufacturer for more help and support.

  http://www.Toshiba.com/Tai/support.jsp

• Input HDMI to Sony Brevia KDL - V40XBR1 TV menu

  I have a Roku streaming stick plugged into the HDMI port on the back of my Sony Brevia KDL-V40XBR1 TV.

  However, I can't find the input channel appropriate when I scroll the entry options.  How do the correct entry?

  Hi richardjroberts!

  You must press the TV/VIDEO button on your remote control Sony provided several times and then select input VIDEO 6 that corresponds to the entry for the HDMI connection on your Sony KDLV40XBR1 TV.

  If the VIDEO input 6 is ignored, you must press the WEGA GATE, go to SETTINGS, and then select the LABEL VIDEO INPUTS. Under VIDEO LABEL ENTRIES, select VIDEO 6 and turn it on.

  If my post answered your question, please mark it as "accept as a Solution.

• Pavilion dv7-6b56nr: input HDMI not working not

  My laptop old 4 year was quite slow and unresponsive at times so I am here yesterday & downloaded some updates driver including audio and video. It runs a lot faster now, but today I have connected my laptop to my TV that I made hundreds of times through hdmi connection and it does not work. That's happened?

  * I also can't adjust the brightness more. He's stuck on super bright.

  Hi @miltaryman,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv7-6b56nr Entertainment Notebook and the HDMI doesn't work does not correctly. Here is a link that can help troubleshoot the HDMI connection.

  You can try to use theWindows Update Troubleshooter to fix updates that do not come through Windows.  Please restart the laptop twice to make sure that all updates are completed!
  
  Please let me know how it goes.
  
  Thank you.

• Input HDMI Sony Bravia KDL-40BX420 of connected PC has stopped working

  I used my laptop to my Sony Bravia TV using the HDMI ports for more than two years without problem. I unplug it and plug it back on a regular basis without problem. I have returned from a weekend out of town and plugged my laptop back to and kept getting the error on the TV:

  No signal. Check the external source or select another entry with the ENTER key.

  TV:

  Sony Bravia KDL-40BX420

  Laptop:

  HP Pavilion G6 with graphics Intel HD Graphics 3000 with the latest drivers (Intel HD Graphics driver for Windows 7/8/8.1 64 - bit, v15.28.20.64.3347), 8.1 for Windows 64-bit

  What I tried:

  • Tried it with 3 different HDMI cables (without success)
  • Tried connecting Player DVD TV HDMI ports (successful, plug-and-play)
  • Tried to connect the PC to another TV with cable HDMI listed above (successful, plug-and-play)
  • Tried to reset the TV to factory settings (reset successful, still no PC signal)
  • I tried power reset on the TV (unplugged for a few minutes, connected again, no still no PC signal)
  • Tried to reinstall graphics drivers of PC (Intel HD Graphics Driver for Windows 7/8/8.1 64 - bit, v15.28.20.64.3347, Intel, installation successful, website still no PC signal)
  • Tried to install the latest graphics drivers from the manufacturer's Web site (Intel high definition (HD), pilot chart, v9.17.10.2843, from the HP website, successful installation, still no PC signal)
  • Tried different resolutions video on the PC, exit in double...
  • Tried different boot sequence, with mixed results:
  • Turn on PC the sound on the TV: no signal.
  • Turn on TV that the sound on PC: I see the logo of the 8 on Windows with white turning points on the TV (double on the PC screen and before arriving at the Windows login screen TV turquoise rounds with the error 'no signal'.) So the HDMI works, but only for a short period of time during the boot sequence for Windows.
  • I tried restoring the system to a restore point not go a week ago (HDMI to TV works well all week), no chance. Still no TV signal, and the PC keyboard has stopped working too. That challenge.

  I'm out of options. Help would be very appreciated. Please just keep in mind that he has worked for more than two years without any special configuration. Just plug and play, as it is supposed to.

  Thanks in advance

  have you tried to connect via HDMI port on your TV?

• Help! Input HDMI no sound

  Im trying to connect my Xbox 360 to my r4 m17x. the image works fine, the problem is that I can't get the audio to work. I tried to set the hdmi in default in the sound mixer, but this option does not yet appear. Please help I'm stumped.

  Here's what you need to follow in order to solve this problem.

• Toshiba 32TL838: flicker after fw upgraded in the menus, using HDMI input

  Hello

  yesterday I updated firmware of my 32TL838 to version 6.4.0Y.1 / 94.6.27.8 using the upgrade feature network.

  After the upgrade, I reset the TV to start again with the factory settings.

  During the quick installation after the reset, I noticed a very bad video quality. The entire image flickered, had a ghost effect and looked at interlaced. The menus were almost illegible.

  Once the installation is complete, the TV switched TV (cable DTV) normal mode and at least the TV picture looked quite normal. While the input CABLE is selected, I can also open menus as before, they are displayed correctly.

  But as soon as I switch to the HDMI input, the image becomes nuts once again, just like during the initial installation, including recoveries of TV menu. Sometimes it becomes stable for maybe 30 seconds, but then he is paralyzed again.

  A few words about my setup: TV uses only input HDMI 1 and the cable entry, nothing else is connected.
  Links to HDMI input to a receiver Onkyo TX - SR508 AV which is powered by a Fantec 3DS4600 media player and the Blu - Ray BDP - S373 player.

  Because I expect the question of what-to-your-HDMI-wiring, I traded the HDMI cables but as expected which has not helped at all.

  At least, I seem to be successful by bypassing the problem when you use the Fantec drive.

  Before I updated the firmware, I was able to use the drive with 1080 p/60 Hz and the player has been installed as a result.

  Now I switched to 1080 p / 50 Hz, and the video image seems OK again. (However, I made a short test and as I said, sometimes_
  the image is OK for a short period).

  Unfortunately my BluRay player has no menu to change the frequency, so I watch BluRay or online services, the player offers, is impossible.

  So, what can I do now? A downgrade of firmware (if possible) would be a quick temporary workaround I could accept. But medium-term I'm expecting Toshiba to restore functionality that they promoted and for which I paid.
  (Youtube stopped working with the old firmware and it seems that 1080 p/60 Hz no longer works with the latest firmware).

  Anyone know how to downgrade the firmware using a USB? I already downloaded the previuos version tl838_853886.bin but I do not have a nail how (and if) it can be installed.

  Thanks for your advice
  BELEKTRO

  Hello

  As far as I know the isn t possible downgrade firmware.

  But you said that you noticed this problem by using an external device connected to the HDMI 1 port.
  As far as I know the Toshiba 32TL838 supports 4 HDMI ports.
  I recommend you to check all of the 4 HDMI ports as well as to check all device configuration options.

  Check for example the rate of active movement + option available.
  This option allows to improve the rate of cooling of a TV

• Toshiba 46WL768 - abandonment of the photo while streaming from a PC via HDMI

  I believe I have exactly the same problem for a year on my 46WL768 when running from a computer via HDMI.
  The problem seems to be related to the level of the input signal that happens much more often a source of the computer, but seems to be the same problem you describe clear or too dark.

  I tried all versions of firmware that I can find.
  I tried, as far as I know, all combinations of each including triggering turnng the options in each mode of TV (something still on in-House who controls this however, no matter what you do).
  I tried several computers and several graphics cards very expensive.
  I even sent listed you for repair where a number of parts, including the motherboard have been replaced (as a precaution because they could not find the same question, yet I can reproduce instantly).

  You can make it less annoying by opting for one of the default views Hollywood, but you can't, in my experience, get rid of it. Your only two options seem to be flashing constantly with a very high level of responses for actions on the screen, or it is less often stumble but have an image on the screen "lag". If you look at the Movies TV/no-act, the second option is not too bad but there not acceptable for computer use which is what I use it for.

  The problem, as I understand it, is once the bright/dark ratio of the image displayed on the screen will over/under a certain level of relaxation, the screen flashes on an another secondary display mode and the white you see is this switch.

  Maybe you should try to disable some additional features like local sponsorpark, clean scan, view auto or erase the image.
  AutoView mode automatically adjusts the picture settings based on the ambient light conditions and input signal.
  http://us.Toshiba.com/TV/research-center/technology-guides

  Also recommend that you use the PC mode in case the laptop is connected. PC mode is available in mode of RGB/PC Input / input HDMI