Activation of the NAC HA puts several hosts and ASA with processor clocked at 100%

Similar Questions

• Access the SMB storage using esxi host and manage with MS server 2008

  Hi there, I know the subject line can be confusing, but I didn't know how to explain what I need in the line object in such a short sentence.

  in any case, I have a storage device SMB, a Promise VTrak M610P, which is attached to a blade server 1U HP through interface channels double Ultra 320 SCSI host. I can't configure the VTrak as a NFS, the only way to access logical drives is connected to a server via the scsi channels and using the operating system to share the drive and the shared disks.

  I would use a server blade with dual ultra 320 SCSI host interface channels and connect the VTrak to this server blade. Then I would install ESXI hypervisor OS 5.5 to this server blade. I want to know is if the ESXI operating system will recognize the logical drives and if I create a virtual machine with MS server 2008 and see if the virtual machine detects logical drives, so that I can share the drives? I hope that I'm supposed to and if I'm not, please let me know what makes no sense, I will do the best to explain it better.

  Thank you

  Andy

  So it turns out that there seems to be something wrong with vClient when you add a hard disk (virtual disk) to a virtual machine of size greater than 4 TB. Article VMware KB: value of range error message when you add more than 4 TB capacity discs in vSphere Client describes this if you encounter this problem, add the hard drive via vSphere CLI, CLI power or vmkfstools. So this seems to be a known issue on vClient. What I ended up doing was using vClient, creation of hard disk, adding to the virtual machine (size of the hard drive is to 5.45) and when I would get the error message on the DiskCapControl out of reach, I would just click OK and then finalize the creation of the hard drive on the virtual machine. Once the process is complete, I selected the virtual machine and noticed that he indeed added a new HDD size 5.45 TB even if he's complained about it. I pulled to the top of the virtual machine with windows server 2008 R2 installed and was able to create a new disk under windows and set it up as a shared drive on the network. Looks like vClient must be updated by VMware and correct this bug, if it's a bug that I think. Thank you for the help vervoort!

• Using Acrobat XI with IE11 and Win7; I can't the acrobat toolbar. Watch modules Manager he's here and activated, but the toolbar is not there. And when I use right click and click on convert to Adobe pdf format, nothing happens.

  Using Acrobat XI with IE11 and Win7; I can't the acrobat toolbar. Watch modules Manager he's here and activated, but the toolbar is not there. And when I use right click and click on convert to Adobe pdf format, nothing happens.

  Can anyone help?

  Hi Richard,

  1. start Internet Explorer.

  2. Select Tools > Internet Options, and then click the Advanced tab.

  3. check if "enable third-party browser extensions (requires restart)" and click OK.

  4. close all Internet Explorer Windows.

  5 restart Internet Explorer.

  Let us know how it goes.

  You can also check out the following link and see.

  Quick fix | See a PDF on the Web

  Concerning

  Sukrit diallo

• With this new firefox updated. The (enter private browsing) is gone and replaced with (new private window). It is sort of back enter private browsing?

  With this new firefox updated. The (enter private browsing) is gone and replaced with (new private window). It is sort of back enter private browsing?

  You can drag links to the private browsing window (hover the icon on the task bar for this update of the Firefox window).
  
  If you drop the link on an empty space on the tab bar, then the link should open in a new tab.

• Can I use the Wireless Comfort Desktop 5000 keyboard and receiver with a Mobile 4000 mouse?

  Hi, as the title says: can I use the Wireless Comfort Desktop 5000 keyboard and receiver with a Mobile 4000 mouse? I have the kit, but the mouse is to bulky for me and I would use a mouse Microsoft Mobile 4000 but with the same receiver as the keyboard of the kit, is it possible? Thank you

  Hello

  looks at it's not going to work. Wireless products are programmed to be used with a specific key, so they won't work on another dongle.

  B Eddie

• Stop several hosts and the virtual machine on the host computers

  Sorry to bother the community again. Right now I have a script that stop or suspend virtual machines on a host in order using an external file to store the order (with the help of lamw). The plan is for the script to reside in a virtual centre with multiple hosts. The script must be able to stop the vm on the host, the closure of the host (to be ordered the same idea with the external file), then jump to the next host and continue the same process. I tried to create nested for loops this task, but it doesn't seem to work. Any help would be appreciated. I have attached the script. Thanks in advance

  I think you try to only syspend or stop each VM and then stop the host.

  This code might help.

• With the help of Windows to the top. -J' changed my settings on the page to backup several times, and now when I try to back up my computer it keeps default.

  TODAY, I CHANGED MY SETTINGS ON THE BACKUP OF THE PAGE WITH THE HELP OF WINDOWS BACK UP TO SEVERAL TIMES AND NOW WHEN I TRY TO BACK UP MY COMPUTER AGAIN, HE GUARD DEFAULT.
  I HAVE WINDOWS VISTA PREMIUM 64 BIT.
  I WOULD APPRECIATE YOUR RESPONSE

  Hello

  1. do you receive any error messages?
  2. what exactly happens when you try to backup data?
  3 have. what settings you changed?

  Please answer these questions. This will help us assist you better.

  Try to perform the clean boot.

  Refer; http://support.Microsoft.com/kb/929135

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• reset of the NAC server to factory default and feeder

  I NAC appliance CAM version 4.7 (3) I want to get back to his factory or clea all configuration

  and the SME with the server.

  Wael,

  Elly's right. For production systems if you want to start over, best idea is to recreate the image.

  If you are in a lab setting, you can cancel the database on cam by running the following commands:

  -stop service perfigo
  -dropdb localhost h postgres - U controlsmartdb
  -createdb localhost h postgres - U controlsmartdb
  -psql localhost h postgres - U controlsmartdb< >
  -perfigo service start

  The CASE, you can remove the/perfigo/access/bin/env file and restart.

  HTH,

  Faisal

  --

  If you find this article useful, please note so that others can easily find the answer

• ATTRPARENT dimension of the text attribute to several levels of construction with a rules file

  Hello

  My first post here.

  I'm trying to create the dimension generation rule to create a dimension of the multilevel text attribute and then combine with the basic dimension.

  So far, it is difficult.

  With regard to my experience:

  -J' have a relatively basic understanding of the rules of charge both with regard to the data loads and define the updates - I find this quite confusing area and the documentation does not help that much

  -J' only started using dimensions attribute, so for me it's a new concept, but we are already quite useful in certain applications

  -J' I try to automate the process of construction of dimension attribute, and then associating attributes with the basic dimension

  I use the following documentation as a guide:

  Building size attribute and associate attributes

  http://docs.Oracle.com/CD/E12825_01/EPM.111/esb_dbag/frameset.htm?dotdimb.htm

  and / or

  Work with the attribute multi-level Dimensions

  http://docs.Oracle.com/CD/E26232_01/doc.11122/esb_dbag/frameset.htm?ch21s06s05.html

  (essentially the same source in both cases)

  The ultimate goal is to replicate one of our existing recently created attribute dimensions of a cube to another.

  I built a few versions of the required flat file and the corresponding rules file, but none worked.

  I tend to get the following validation error message:

  This field is defined as an ATTRPARENT. The following column must be a field of association attribute type.

  As I got stuck so I gave to the current actual attributes and moved on to experimenting with the sample / base cube.

  I built a flat file that is supposed to create a new dimension of text attribute named ABC with two attributes level structure:

  ABC

  A

  AA

  AB

  B

  BA

  BB

  and associate it with the dimension of the product in the following way

  200-10 AA

  200-20 AB

  200-30 BA

  200-40 BB

  The flat file looks like this:

  "AA"      "A"         "200-10"               "A"         "AA"      "200"

  "AB"      "A"         "200-20"               "A"         "AB"      "200"

  "AB"      "B"         "200-30"               "B"         "AB"      "200"

  "BB"       "B"         "200-40"               "B"         "BB"       "200"

  and the rule file has 6 matching columns with titles as follows:

  Level0, LEVEL1 ABC, ABC Level0, product ATTRPARENT0, ABC ABC0, LEVEL1 product, product

  all agree with what the documentation says.

  The first 2 columns are intended to define and create the dimension of the attribute, while the 4 next make association...

  I couldn't the above rules file to validate.

  The same validation error message appeared as previously:

  This field is defined as an ATTRPARENT. The following column must be a field of association attribute type.

  However when I tried to actually update the outline of the mistakes of dimbuild.err file has been created which gives some additional clues:

  \\ATTRPARENT column 4 must precede a numeric or datetime column attribute association

  Now... Finally the interesting part...

  Back to the documentation...
  

  I don't mind if the size of the attribute is generated and then those associated with step or in two separate steps.

  I try to do both tasks in one step only because that's what the documentation seems to suggest attributes at several levels.

  First of all I read:

  Note:

  If you work with a multilevel dimension attribute or with a dimension of the attribute of the digital type, Boolean, or date, the rules file requires an additional field. See working with Dimensions of the multilevel attribute.

  Yes, I work with a dimension of the multilevel attribute so the above statement applies (I guess) and so I'm going to see what works with several levels attribute Dimensions has to say.

  Then, I read:

  When an attribute is part of a digital multi-level, Boolean, or dimension attribute date, the source data must include columns for all generations or the size of the attribute levels.

  Fair enough... so I do what they say... my attribute dimension is at several levels, so I can assume that the statement above applies...

  So, I build my rule in accordance with the guidelines above.

  And then, as we have already mentioned, I get the error message about ATTRPARENT and when I read, it turns out that ATTRBPAREN cannot be used for numeric or date attribute dimensions !

  I'm totally confused at this point.

  What about the attribute text multi-level dimensions ?

  They are several levels but they are NOT numeric or date those!

  The documentation does not seem to tell what to do in this case...

  Anyone build something like that?

  What is the thing that I'm missing?

  What about

  I'm glad that you got to work. I tested and that is to create the dimension attribute and associate it with the rule of the load.

  You could ignore the construction size manually. Remove the attribute dimension. The rule1 go for the Dimension settings under the definition of Dimension tab. Then right-click on the product and change the properties. On the attribute tab, add 'Test' or whatever you want to call the attribute, and assign the text type. He adds the attribute and associate it with the basic dimension when it create the hierarchy. Note that the rules could actually be reversed where you create members of level 0 and then more later to create the hierarchy.  Of course you must pass the size of the attribute association to the other rule

• Try to plug it into the router which is already installed and running with the other computers in the House.

  My computer says "Windows cannot find the certificate to connect to the network."  This computer is working - and an administrator.  This person could not help me.  Hope someone here can...

  The 'certificate' this computer is looking for is something that is used in networks wireless business and almost never in home wireless networks.

  The following assumes that you have given to your home network wireless (SSID of the router) "name" which is recognizable as yours and different from the network name to your work.

  The following also assumes that you are using Windows XP service pack 3 and you use to control your wireless Windows Wireless Zero Configuration (WZC) adapter.

  If none of these assumptions are not correct, provide the relevant information.

  If all of the above assumptions are correct, then

  • Open network connections (start > run > ncpa.cpl > OK)
  • Right-click on the icon for your wireless adapter and select Properties
  • Click the "Wireless Networks" tab.  This is where you confirm that "Use Windows to configure my wireless network" is checked. If it is not checked, stop here - you need to identify the utility that controls your wireless adapter before continuing. a good place to look is the icons in the Notification area (next to the time display)
  • Select your network (SSID of your router) from the list of "Preferred networks", and then click Properties
  • Click on the "Authentication" tab and uncheck the box for "enable authentication IEEE 802. 1 x for this network. "
  • OK your way out.

  If "allow authentication IEEE 802. 1 x for this network"is checked, but grayed out, so you can't change it, click 'Cancel' to return to the"Wireless Networks"tab and"Remove"the entry of your router.  Then click on "View Wireless Networks", select your router, click Connect and enter your password when you are prompted.

• DIFFICULTY this pl/sql, put in GUARD AND RUN WITH GOOD EXAMPLE

  Please please help me... HOW to TROUBLE WARNINGS AND EXECUTE WITH GOOD EXAMPLE with the syntax
  
  /*
  WARNING: the execution is completed with warning
  FUNCTION EMP_GENDER to update.
  */
  
  CREATE FUNCTION EMP_GENDER (EMP_GEN CHAR (1)) RETURN CHAR (1)
  IS
  CUST_GEN char (1);
  DTECH1 EXCEPTION;
  BEGIN
  CUST_GEN: = UPPER (EMP_GEN);
  IF CUST_GEN! = ' OR CUST_GEN! = 'F' THEN RAISE DTECH1;
  ON THE OTHER
  RETURN CUST_GEN;
  END IF;
  EXCEPTION
  WHEN DTECH1 THEN
  DBMS_OUTPUT. PUT_LINE ('GEN DISABLED');
  WHILE OTHERS THEN
  DBMS_OUTPUT. PUT_LINE (SQLERRM);
  END;
  
  Published by: 923746 on April 18, 2012 23:05

  Hello

  First, you will need to format your code correctly.
  Second, you must remove the (1) Arctic char in the declaration of parameter and the return value.
  (this site comes out "<>" so I replaced)
  CUST_GEN'M ' OR 'F' CUST_GEN
  with
  CUST_GEN! = ' OR CUST_GEN! = « F »

  CREATE OR REPLACE
    FUNCTION EMP_GENDER(
        EMP_GEN CHAR)
      RETURN CHAR
    IS
      CUST_GEN CHAR(1) ;
      DTECH1   EXCEPTION;
    BEGIN
      CUST_GEN    :=UPPER(EMP_GEN);
      IF CUST_GEN !='M' OR CUST_GEN != 'F' THEN
        RAISE DTECH1;
      ELSE
        RETURN CUST_GEN;
      END IF;
    EXCEPTION
    WHEN DTECH1 THEN
      DBMS_OUTPUT.PUT_LINE('INVALID GEN');
    WHEN OTHERS THEN
      DBMS_OUTPUT.PUT_LINE(SQLERRM);
    END; 
  

  Kind regards

  Peter

• How to access internet when the network is put in host-only mode

  I'm using workstation 6.5 version.

  I need to know if I change the network configuration of host-only bridge then what will be required on a virtual computer to access internet from VM parameters?

  If this is not possible using host only then there at - it an alternative for the same?

  Connect NAT instead of guest only network. Your virtual machine should now be assigned a local IP address of the NAT internal dhcp server.

  You can also connect to the Internet through this network and also your virtual machine will talk to the host on a private network.

• Data storage of the optical spectrum for several points and recalling a specific

  Hi, I'm working on an installation of measurement of the optical spectrum automated for a summer project, I have been using labview for about a week now and have had bases for stage motor control, but I have problems with the data management...

  I'm looking to store data such as those acquired with an optical spectrum for several XY points Analyzer and recall the optical spectrum for a specified point? Currently, I am looking at writing to the file of measure and reading of the measures such as the options file, but I'm not sure how to name each piece and the data and to recall them correctly. Are there examples where this has been done? any help will be greatly appreciated.

  I use a connect Yokogawa AQ6370 via ethernet, LabVIEW drivers are provided for this, but I can't find the screws provided here is

  Thank you very much

  Asiri

  Not clear? Ask at your

• Add the date of activation of the system of detention of intrusions and Cisco ASA FirePOWER

  Good evening

  I want to add detention system intrusions to Cisco ASA FirePOWER license (with I.P.S, protection MPAs., Apps and URL). Is possible that? I have to buy another license or only (not free) upgrade?

  the start date of the firepower Cisco ASA license-protection starts from the purchase date or from date of activation/installation on router ASA5506-X?

  Hi again, my responses below:

  (3) the L-ASA5506W-TAMÁS = is the correct part number if you are looking to get the model of 5506-X Wireless ASA. Don't know why ours (CDW) site has not listed :) However, we have listed promotional SKU: L-ASA5506WTAMC-1PR. For more information, I suggest that join you your CDW account manager. If you are not a customer CDW then I would suggest that you contact your local Cisco partner dealer

  (4) here's the datasheet FireSIGHT:

  http://www.Cisco.com/c/en/us/products/collateral/security/firesight-Management-Center/datasheet-C78-736775.html

  The device can be virtual or physical

  5.1) IOS-base-2960 - I'm not sure I understand the question. Can you elaborate a bit more on what you're asking here?

  5.2) I.D.S. requires no additional licenses. It is part of the solution if you buy above subscriptions. The main difference here is that IPS (Intrusion Prevention System) is deployed in line and he will drop the traffic/connections if a malicious activity is detected. IDS (Intrusion Detection System) is monitor only. Thus, if the malicious traffic is detected, firepower will alert you to this topic but he will drop all traffic.

  3DES/5,3) AES will be included at the time of the references you listed.

  Thank you for evaluating useful messages!

• Move the virtual machine from one host to another with shared storage

  Hello

  I have a question on how to move a virtual machine from one ESX 4 host to a host ESXi 5.  These hosts have access to the same shared storage but the ESX 4 host is outside the network and host ESXi 5 is inside the network so vMotion is not an option.  They are in different groups.  I know that there must be an easy way to move this virtual machine, but for the life of me, I can't find it.  I guess I have remove the virtual machine from the external cluster but how to make the virtual machine in the internal cluster?

  Thanks in advance...

  If both host access to the data store even where VM's store, just stop the virtual machine, remove inventory on ESXi 4, go to ESXi 5 vSphere vSphere, browse the data store where the VM is stored, do a right-click on the .vmx file and add to the inventory.