Activation of Thunderbird requires more than TWO minutes after clicking on icon Thunderbird.

Similar Questions

• LAbview program behind schedule and displays the data arriving more than two minutes ago

  I am currently using two OR 6070e daq cards PCI (16 analog inputs on one) which are syncronised in the software. In the producer I loop gain of 32 channels data and do my processing on the data in the loop of the consumer. Each signal is displayed on a waveform graph. I have sample at 32 kHz to my problem is that my software works well, but it lags behind in the necessary time sto updated graphics. More I run the software becomes more lag. For example, data showed the field of waveform if poster both 5 minutes after the due event. Even if I use a lower sampling rate (3 kHz) continues to accuse software. The number of samples, I've read is always a second of data. How can I make this software performing near real time with out such a big lag. I need to run my software on a windows OS. I know that you won't get no hard real-time running labview Windows OS, what can be done to improve the speed of my program.

  1. another question on the data sheet of the data acquisition card NOR 6070e PCI indicates the size of the buffer FIFO is 512 S. Why can I in labview set myh size buffer to a value greater than 512 samples. For example when I taste 1000 Hz and read 1000 Hz off buffer I exceed the isze of buffer FIFO data acquisition card, but my program still works.

  Cordially (sorry for the spelling error typed this quickly)

  the main VI is DP_software

  You do not have something interesting to look at.

• After updating to the latest version of Itunes, it works really slow, takes more than a minute to recognize my Iphone and will not correctly backup my Iphone

  IPhone 6 64 IOS 9.3.1 runs the latest version of ITunes 12.3.3.17

  After I updated to the latest version of ITunes, when I run the synchronization, it goes through the six steps, and then returns the message that the backup has failed

  Running on a 64-bit Windows 8.1 Dell computer.

  ITunes now works much more slowly. Takes a long time to load. It takes more than a minute after I plug in my Iphone for the IPhone to be recognized by Itunes.

  I rebooted the machine. Remove the locked file. All have failed to solve the problem

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  If you have tried the suggestions above without success, then another option is to go back to the previous version of iTunes that has worked for you. See the roll back tips to installers of iTunes. Roll back of 12.3.3 will be to restore the pre-upgrade library in the previous iTunes libraries folder.

  TT2

• When I click on close downcomputer the hourglass appears on the desktop for more than a minute before the closing down of the icon is displayed

  When I try to shut down my computer, I click on start > click on computer of closing and the hourglass appears on the Bureau for more than a minute, when the close icon appearsand I click on it, it takes about 2 minutes to turn off actually. Any suggestions

  We need more information!

  Borrowing another post by ElderL (the same "JoseIbarra' that Elizabeth23 already mentioned):
  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  What is your Internet browser and version?

  Do you have the Windows Desktop Search installed issue?

  Your system's disks IDE or SATA drives?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  What do you see (exactly) that you don't think you should see, and when you see it?

  What do not you think that you should see?

  If the system works, what do you think might have changed since the last time it did not work properly?

  ___________________________________________________________

  Once you answer these questions to the best of your ability, a lot of people here (don't forget that almost all of us are volunteers who are also using Windows XP) will probably be able to help quickly resolve your problem.
  That (ElderL also) might help, too (because its results will contain many answers to the above questions):
  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.

  For video device and driver information, expand components, click view, click on edit, select all, copy and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  This will minimize back Q & A and eliminate guesswork.

• Thunderbird may take more than a minute to open, how to fix this?

  Sometimes the thunderbird program may take more than a minute to open, sometimes it only takes 20 seconds. How long this program normally does open?
  What can I do to speed up this process?

  To diagnose problems with Thunderbird, try one of the following:

  • Restart Thunderbird with disabled modules (Thunderbird Safe Mode). On the Help menu, click "restart with disabled modules. If Thunderbird works as usual, there is an add-on or theme interfere with normal operations. You will need to reactivate the modules one at a time until you locate the offender.
  • Restart the operating system in safe mode with network. This loads only the basics needed to start your computer while allowing Internet access. Click on your operating system for instructions on how to start in safe mode: Windows 8, Windows 7, Windows Vista, Windows XP, OSX

  If the safe mode for the operating system to resolve the problem, there are other software on your computer that is causing problems. The possibilities include but not limited to: AV scanning, virus/malware, background downloads such as updates of the program.

• My thunderbird (windows 8) essentially has stopped working. More than one minute to open an email - all other functions have similar delays. What should I do?

  For some reason, thunderbird (windows 8) essentially has stopped working. More than one minute to open an email - all other functions have similar delays. I tried to archive, but I get a message that says that a script has stopped working. He does the same in thunderbird safe mode. My old computer (XP) works very well. I can't find my profiles on windows 8 to rebuild the database world.

  Follow-up: McAfee was the problem. I contacted them via chat. Remotely, they took control of my computer and changed the settings. TBird works fine now.

  Thank you for all your help.

• Mail (8,0) keeps smoking - will not be open for more than a minute or two. Help?

  Mail (8,0) stop smoking. Will not be open for more than a minute or two. This has happened for several days. Help?

  You have all the extensions Mail any installed?  Who is your email provider?

• Number of records between two dates which lasted more than a minute

  I need to count the number of events/records in a single table with the dates of appointment and for how long the appointments in another table, I have two cells to hold dated (start and end dates) give a range. I want to count the number of appointments that lasted more than a minute falling into the test range.

  I am sure that this is COUNTIFS and I tried to make it work.

  Hope you can help.

  Thank you

  You could do something like that

  

  The data table on the left and are named "Data."

  Data in the table on the right.  Enter the Start Date, end Date and time Min.

  D2 = COUNTIF (Data::B, "> =" & C2, Data::A, "> =" & A2, Data::A,")<>

  It's abbreviation dethrone select cell D2, and then type (or Coptic and paste here) the formula:

  = COUNTIFS(Data::B, ">="&C2, Data::A, ">="&A2, Data::A, ")<>

• When I click on the download button opens a page with three small boxes, and I think that this means a wait, but they lasted more than two hours, unfortunately and I tried many things and each time gets the same, I work now want photoshop required a

  When I click on on the download button opens a page with three small boxes, and I think that it means a wait, but they lasted more than two hours, unfortunately and I tried much and each time gets the same thingit's working now, I want photoshop necessary and reminders even when I tried to buy the same thing happened to me Please I want to a quick solution

  Make sure that you have enabled cookies and clear your cache.  If he continues to not try to use a different browser.

• Why do my Predator G3-605-UR20 more than a minute for starting.

  When I do a cold boot, it takes more than a minute, sometimes 5 minutes to start. During this time there is no activity on the LEDs on the top of the computer. Normally I put the computer in hibernation. It only take a few seconds to start. It seems that the post test blocks looking for material. The hardware is the same, as it came from the factory.

  I unplugged the DVD player and the machine seems to start fine now. Replace the DVD drive. Thanks for the help

• Put into service takes more than 15 minutes. Stop is worse. It hangs at "closing Windows" regardless of the programs that I run is extremely slowly.

  Original title: start & close problem. Slow response

  My PC is running Window XP SP2. I did all the updates.

  Recently commissioning takes more than 15 minutes. Stop is worse. It hangs at the "closing Windows.
  Whatever programs that I run is extremely slow.
  I ran virus scan, microsoft fixed, but the problem persists.

  Well, I think you don't like it, but the first thing to do is to eliminate by using their special tools Norton Uninstall program:

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?LG=English&CT=United+States&docid=20080710133834EN&product=home&version=1&PVID=f-home

  Now, you might think I be without protection and get some bad things on my computer, but you just want to see how things are going without it.  Just don't visit WWW stupid or silly sites, where you can pick up some virus or malware and you can always install a new copy, but I think it's a big headache for you now.

  It might be out of date, too many options of protection installed, etc.  More protection is not always better, and you will pay for it in the performance of the system with the more stuff you add.

  Then when Norton is gone, proceed as follows:

  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

  Consider instead of Microsoft Security Essentials or Norton - he did a good job.

  We must eliminate what can cause problems, so I'd start with Norton.  You can put it back later if you want, but you need to see how things are going without it.  Moving things to a good operating system that you are happy with first.

  Eliminate potential problems one at a time and test thing out... one thing at a time.

  Symantec/Norton is you biggest problem right now.

  Check your NVIDIA drivers:

  I use the NVIDIA site and let scan them online take a look at your video system and see what he suggests for drivers and consider their analysis if they offer a new driver.

  It is recommended to run the scan NVIDIA with Internet Explorer.

  Here is the address of the NVIDIA page:
  http://www.nvidia.com/download/Prescan.aspx?lang=en-us

  Read the instructions, and then click the DRIVERS GRAPHICS button to start scan and answered in the affirmative, if asked to install the plugin required to run the NVIDIA scan.

  Get rid of Norton.

• How to activate my MSF program for I could use more than 30 minutes at a time

  I had to uninstall my Microsoft Flight Simulator X and MSF - program of acceleration of my PC and reinstall them.  I did it.  When I installed FSX-Deluxe edition, the program asked me the activation number, I gave and then reinstalled the acceleration program. He asked for all the numbers, but now when I run the program, it suits me after 30 minutes then and asks for the active program.  I tried to use the Enternet and everything, but I can't well any place where I can activate this program.  I even call your hotline, they were of no help at all.  First I did not understand that you are Tech. He talked so fast and has no sense at all.  My question is: How can I activate the program? without going to halfway around the world to do. I never had this problem in the past, why now?

  Chuck Baumgartner

  Hello

  I suggest you to follow the steps mentioned in the article below and let us know if the problem is solved or not.

  How to activate my MSF program for I could use more than 30 minutes at a time

  http://support.Microsoft.com/kb/925723

  Also check the links below.

  Frequently asked questions on how to enable Microsoft Games for Windows, streets and trips and Mappoint

  http://support.Microsoft.com/kb/927007

  Microsoft Flight Simulator X Service Pack 2 Readme

  http://www.Microsoft.com/products/games/FSInsider/downloads/pages/SP2-en-Readme.aspx

• When you publish something more than 2 minutes on windows movie maker (now), it freezes at 70 percent and do not finalize, how to fix this?

  I don't know how I got two programs, (Director) (direct Director) on my pc a vista? but nonetheless (movie maker) is the program that I use. but now that I said... Can I publish and audio/video content more than a minute or two of time!  can someone help me? Thank you..

  I don't know how I got two programs, (Director) (direct Director) on my pc a vista? but nonetheless (movie maker) is the program that I use. but now that I said... Can I publish and audio/video content more than a minute or two of time!  can someone help me? Thank you..

  ============================================
  Vista Movie Maker 6 came with your Vista operating system
  and IMHO the best of both programs. Windows Live
  Movie Maker was included when you downloaded and installed
  Windows Live Essentials.

  The publication (economy) questions are probably caused by
  files corrupted or incompatible source (photos, video clips,
  audio clips).

  Several formats are apparently compatible with Movie Maker but
  the most reliable choices are:

  Photos - bmp
  Video - wmv
  Audio - wav, wma, wmv

  But... first... If you are running Movie Maker 6... try to go to... Tools /.
  Options / Compatibility tab and uncheck the box 'all' filters / OK now...
  try posting once more.

• opening of session takes more than one minute (win vista)

  Hi, I have vista premium 32 bit version with 4 GB of ram and 2 x cpu 2.00 GHz each I have no problem with the hardware and all drivers are up to date and my whole system I revised myself, but I can't work out just why he is more than a minute at the start screen of vista with the scrolling green bar? Now I don't know what im doing with my system, but im either missing something or there is a more serious problem. I just found a solution that gets rid of the problem but he always comes back.  the solution that I found was if I reset my read-ahead using a piece of software called tweakVI my computer starts perfect as it was just installed fresh lol. BUT after I rebooted to new that dates back to more than a minute to boot.

  
  
  I used boot procmon log too, and I got 1 thing that takes a lot of time at startup, close to 80 seconds. Svchost.exe notifychangedirectory path: c:\windows\tasks and the result is success there is 4 wires still taking 80secs and a little more ideas what can I do with this?
  
  
  I also tried other things like (clean boot) disable all non-microsoft services and which does not address the cause, as well as audit service task scheduler to see if he was on a departure delayed but it is set to automatic.

  I doubt that it was a Windows Update.  Simply charge things.

  Frankly - until the boot time go beyond 3 minutes on a modern machine, I think very little of him.  At initialization time means very little compared to how it runs once it is up.

  I systems I demarrer start from SSD, installs own, etc.  With the things that start (antivirus, antimalware, various services for wireless and wired networks, firewall, etc.) sometimes it can take more than a minute--sometimes two.  Generally not - your stay below / 1 minute.

  What is your exact (of cold/off voltage) (three trials minimum) start?

  What a warm reboot (choose to reboot and when the powers of the screen wide going / empty to start loading, start time)?

  Use "AutoRuns" to see what everything starts up.

  "Process Explorer" allows you to really dig into what is currently running.

• Can I enable CC on more than two computers at the same time?

  See what adobe is always allow two computers active simultaneously?

  This is a subscription service and, while we're technically downloading the software, we don't really "own" it as it can be 'locked' if we go over our activations.  From what I've seen in many forums both in and out of Adobe, three computers seems to be the standard of what I see if I beg the question...

  What is the problem with allowing only TWO computers active being allowed to run the software at any time?

  
  

  And then I imagine that, logically, there is a problem if I wanted to use CC on a mobile device, but also my computers?

  With a music subscription service, once the music unsubscribe disappears and everything is fine - and I can access from multiple devices.  So why is Adobe being so restrictive with PS and LR (and CC in General)?  It seems rather strange that if I want to access PS/LR on a single machine, LR on the other and the first on a third, then I cannot, although there is never more than two instances of any single software used is THREE subscriptions - but it is yet another issue.

  If it can't get it fixed, maybe I should just watch Pixelmator and without having to worry about this.

  Please... give an overview.

  the only possible limitations are:

  1. you can use more than one activation of cc at any moment.  That is to say, you can use one computer at a time.  (not much of a limitation, IMO.)

  2. you must disconnect (your other connected computers) before the signature of the component snap on a 3rd, 4th etc. computer.  Once again, no downside unless you didn't have internet access to important moments and for long periods of time for the computer or computers that you need to connect.