Activation of windows on a new SSD after upgrade to a HARD drive.

I just bought a new SSD to replace my old HDD and load with windows 7, I want to activate windows using my old activation code so that windows is activated on my new SSD and then use the disk HARD just for storage, but when I try to use the code, he said that the code is not valid How can I activate my windows with my old activation code?

Have you tried to restart by phone?
How to activate Windows 7 manually (activate by phone)
 
1) click Start and in the search for box type: slui.exe 4
 
(2) press the ENTER"" key.
 
(3) select your "country" in the list.
 
(4) choose the option "activate phone".
 
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
 
(6) explain your problem clearly to the support person.
 
http://support.Microsoft.com/kb/950929/en-us

Tags: Windows

Similar Questions

  • Updated the motherboard, processor and RAM and upgraded to Windows 7 Ultimate 64 bit, after upgrade the external hard drive encrypted with bitlocker will not enter the password.

    Original title: bitllocker Windows 7 issue

    Hello

    I recently updated my motherboard, processor and RAM, but I kept my original 500 GB hard drive, and equipped with a hard drive 2 TB extra, after the upgrade, I downloaded windows 7 ultimate 64-bit. After the upgrade I plugged my external hard drive (which has all my stuff important on it, that is to say the photo, video etc.) to realize that I had he encrypted with bitlocker on my old sysem. It allows Me to enter my password, it looks for a USB flash drive key, I did not. My question is:

    Can I replace my old system with the old motherboard, hard drive and the original RAM to remove the external hard drive for bitlocker?

    I still have the file windows.old on my hard drive, I have to restore it and remove the most recent version of windows 7 off the drive. I do this before I rebuild my old PC? I'm stuck here and would not lose all my photos (the wife would kill me!) I would appreciate your help.

    Hello

    Reassembly of the old computer won't help. You will always need the key to open the Bitlocker.

    You can read the articles and check:

    What is the difference between BitLocker Drive encryption and EFS file system?

    Protect your files using BitLocker Drive encryption

    In Windows 7 BitLocker Drive Encryption: frequently asked Questions

    Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  • Reinstall Windows 7 on new SSD after failure of hard disk, damaged, incomplete product key

    I have a HP Pavilion.  The HARD drive recently failed completely, no possibility to recover data at the moment.  I ordered a set of HP recovery disks, but they seek the recovery on the HARD drive partition; There is no such partition that I replaced the HARD original with a new SSD drive.  To make things worse, the place that HP has chosen to put the Microsoft product key sticker resulted in the product being partially faded key.

    So, to summarize: HP not Pavilion with a corrupt OEM HDD and so far no data recovery possible. a new SSD with no partitions on this subject; a set of recovery disks from HP that don't just work; a sticker with the product key with the first two digits of the product key (as well as some of the barcode, etc.) rubbed off because they have chosen to place the sticker on the bottom of a working computer instead of, say, under the battery, it can be protected.

    If someone in the community has a suggestion as to how to install Win 7 (must be 7 on this system, cannot be an iteration of 8 or 10) from scratch, without having to buy it and with a corrupt OEM disc and a partial product key, I'd love to hear it.  Maybe it's time to install Debian on it?

    Ahh, this is the crux of the problem... the bootmgr is missing.

    To restore the windows off the factory restore DVD, you must configure the BIOS to use the DVD drive as the primary boot device. The machine will then start on the first DVD, and you will not get the above message.

  • Impossible to activate Windows on HP g6-1244sa after the failure of HARD drive


    big_dee_gee wrote:

    The hard drive failed on my laptop
  • My MB died and after to put the HARD drive in the new XP machine crashes before the activation screen may appear.

    Original title: XP Pro crashes when MB died and move new HDD PC.

    My MB died and after to put the HARD drive in the new XP machine crashes before the activation screen may appear.

    I can access the HARD drive if I boot from another HARD drive (delivered with the Machine).  Windows just hangs.

    Thanks for any help...

    Hello

    If you try to boot from the hard disk on which windows was installed by using another computer and then, you will not be able to boot from it. You can try to perform a Windows XP repair install and check.

  • Wanted: HDD Fried, need to install Windows on the new SSD

    My HARD drive on the flat because of a power surge. When I called HP Customer Service, they said I could get a USB one of recovery from any Windows computer, and then install Windows from USB to any new HDD or SSD.

    Now, when I try to install Windows on my new SSD clean or Virgin USB 8, it says that the partition is missing.

    How can I install Windows 8 on a whole new SSD?

    Thank you.

    Hello

    You can fallow as follows

    Step 1: Prepare the Installation
  • Wizard BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

    How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

    This has two questions:

    1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.

    2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.

    3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.

    Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.

    The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.

    Then there is the BootCamp partition on the HARD drive partition #2.

    Is there a way to get what I need?

    That is what has been described in this notice of two canoes?

    Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3

    n-on-a-3-TB-fusion-drive http://twocanoes.com/Winclone/support/installing-Windows-on-a-Boot-Camp-partitio

    Thank you.

    After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.

    Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.

    A. take backup

    1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.

    B. fuse out of the merger in two physical disks drive: SSD + HDD

    1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)

    Cs diskutil list

    2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive.  Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,

    diskutil cs deleteVolume Logical Volume ID

    CS diskutil remove logical Volume Group ID

    This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.

    I hit this issue too.  To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:

    Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)

    and repeat for disk1/dev/disk1 which is the HARD drive in my case).

    This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.

    2 create independent partitions (non-fusionend) for the installation of OSX.

    Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".

    3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".

    C. install on the HARD disk as drive didier autonomous not fusion.

    1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.

    D. use BootCamp Yosemite f5 to install windows.

    1. launch Yosemite bootcamp.

    2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software.  Do not click on the last box to install or remove windows pie creating real bootcamp partition again.

    3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.

    4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use.  Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model).  Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.

    -From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.

    -Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.

    -Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.

    5. open Boot Camp Assistant again and only select the third option, install Windows 7.

    It will show you the screen to select what installation disk, select HARD drive.

    Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.

    For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.

    Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio

    6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.

    7. once the installation is complete, check that windows is functioning correctly.

    E. Si you want to upgrade to windows 10 Windows 7.

    1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page.  Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE.  Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.

    2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.

    F. reinstall OSX El Capitan

    Once your target windows system (if windows 7, windows 8 or windows 10) works very well.  You can continue to create again your Fusion drive and reinstall OSX El Capitan.

    1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

    2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

    3. on the selection screen, select start Yosemite OSX install drive.

    4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

    5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.

    6 type the 'diskutil list' command to list all disks and partitions.

    The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.

    The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.

    G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc

    1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

    2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

    3. on the selection screen, select start Yosemite OSX install drive.

    4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

    5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.

    Cs diskutil list

    6. in the terminal, type commands to delete logical drives from basic storage.  Note: All data will be destroyed in the logical drive.

    diskutil cs deleteVolume Logical Volume ID

    CS diskutil remove logical Volume Group ID

    7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.

    / dev/disk0 (internal, physical):

    #: NAME SIZE TYPE IDENTIFIER

    0: GUID_partition_scheme * GB 121,3 disk0

    1: disk0s1 EFI EFI 209.7 MB

    2: Apple_HFS GB SSD 121.0 disk0s2

    / dev/disk1 (internal, physical):

    #: NAME SIZE TYPE IDENTIFIER

    0: GUID_partition_scheme * 3.0 to disk1

    1: EFI EFI 209.7 MB disk1s1

    2: Apple_HFS 1.7 Untitled TB disk1s2

    3: disk1s3 Apple_Boot Recovery 650.0 MB HD

    4: Microsoft database BOOTCAMP 503.0 GB disk1s4

    5: Apple_HFS 801,4 Untitled GB disk1s5

    8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.

    diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5

    Note: Mark the group id of logical volume shown in the results.

    In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.

    So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2

    9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.

    diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%

    10 command "diskutil cs type list" to check the resulting fusion drive created.

    CoreStorage groups of logical volumes (1 found)

    |

    + Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E

    =========================================================

    Name: LVG

    Status: online

    Dimensions: 1815635525632 B (1.8 to)

    Free space: 90112 B (90.1 KB)

    |

    +-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3

    |   ----------------------------------------------------

    |   Index: 0

    |   Disc: disk0s2

    |   Status: online

    |   Dimensions: 120988852224 B (121.0 GB)

    |

    +-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E

    |   ----------------------------------------------------

    |   Index: 1

    |   Disc: disk1s2

    |   Status: online

    |   Dimensions: 1694646673408 B (1.7 to)

    |

    +--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9

    ----------------------------------------------------------

    Encryption type: no

    |

    +--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

    ---------------------------------------------------

    Disc: disk2

    Status: online

    Size (Total): 1809780178944 B (1.8 to)

    Reversible: no

    Name: Macintosh HD

    Volume name: Macintosh HD

    Content indicator: Apple_HFS

    LVG Type: Fusion, sparse

    11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.

    12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.

    13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.

    14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.

    15. yet once please take personal responsibility on damage if you follow the instructions in this article.

  • CS6 Design and Web Premium Adobe can't activate after reinstalling desktop PC hard drive crashed.

    I tried to reinstall and activate my copy of Adobe CS6 after my desktop PC hard drive crashed. I wasn't able to disable this copy from the hard drive crashed making even the impossible windows startup. Please tell us how can I activate this copy on my desktop PC.

    Serial number and activation support (non - CC)

    http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

  • MRT.exe is a new file that appeared on my hard drive

    MRT.exe is a new file that appeared on my hard drive this week, occupying more than 53 000 KB. Is it safe? (the source file is mrtstub.exe)

    Anti - this is the one-time execution of Microsoft for their security scanner, which is updated monthly and is managed by Windows updates current.

    It is designed to attack and remove some specific malicious software which is known to cause serious problems on the internet (for the most part, worms and Trojan horses).

    If you want o, you can remove it, but don't be surprised when it reappears the next time that you run a batch of updates (especially if you have set to automatic WU)

  • the upgrade of my hard drive on an hp laptop. How to create a windows cd? KeyCode on laptop wallpaper

    the upgrade of my hard drive on an hp laptop.  How to create a windows cd?  KeyCode on laptop wallpaper

    You n "t do it this way.

    You use cloning software to clone your existing to the new disk drive.  For portable computers, you will need to purchase an external hard drive enclosure which is (a) compatible with your drive (SATA or PATA) interface and (b) compatible with external connections on your laptop (for example, USB, FireWire, eSata).  Do not spend a lot of money for this speaker ($ 10-$ 20).

    If your new hard drive Western Digital, you can get the free cloning (a 'special' version of Acronis True Image) of WD software (http://support.wdc.com/product/downloaddetail.asp?swid=119) or you can get it separately (this is not an exhaustive list and is in no particular order):

    Acronis True Image Home 11
    EASEUS ToDo Backup
    Paragon Drive Copy or Partition Manager Personal
    Casper
    Norton Ghost

    The process is simple:

    1. Install the software on your laptop for cloning
    2. RTFM (do not skip this step)
    3. Install the new drive in the external case
    4. Connect new player to the computer
    5. Clone original disc on new drive
    6. Stop
    7. Unplug the external computer case
    8. Exchange records (original for external disk) and the new laptop drive
    9. Reboot and enjoy your new drive.

    When you know that the cloning operation was successful, format the old drive, which is now in the external case and use it for backup of data.

  • I had pre installed windows vista on my laptop. now, I replaced the hard drive. so, can we recover only windows giving you the serial number?

    I had pre installed windows vista on my laptop. now, I replaced the hard drive. so, can we recover only windows giving you the serial number? I have sony laptop.

    How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

    There is no Vista free download legal available.

    http://eSupport.Sony.com/

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Mick Murphy - Microsoft partner

  • Why Windows 10 PC can't see iPhone as a hard drive?

    Just updated the iphone to ios 10.0.2 6 and now my PC 10 windows Explorer does not show the phone as a hard drive.

    I updated itunes to 12.5 and itunes sees the phone.

    Hi GSObob!

    Joe_7399 helped me to solve the same problem, check out our conversation: iPhone not recognized by the PC but recognized by iTunes

    I hope this can help you too!

    Good day!

  • came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional. I have no games. No solitaire, Minesweeper, no nothing.

    original title: lack of games
    I have an Acer Aspire PC. It came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional.

    I have no games. No solitaire, Minesweeper, no nothing.
    How can I, without seeking to erase and reinstall again?

    To activate the built-in Windows 7 games:

    1. click on Start (lower-left) and then on Control Panel.

    2. click on programs and features.

    3. on the left side of the screen, click on 'Windows turn features on or off".

    4. find the entry called games & check the box next to it.

    5. click on OK.

    6 reset.

    If the games box is already checked, uncheck the box , click OK, restart, then do steps 1-6 above.

  • A new XP installation will wipe the hard drive first? (currently linex os)

    Little girl had PC at College «friend installed Linex.» I now PC New Testament new XP install first remove the hard drive? (desired)

    Yes.

    Do you need help to make the installation and the subsequent update?  What type of installation media?

  • Windows 7 64 bit does not recognize the external hard drive.

    Windows 7 64 bit does not recognize the external hard drive.  I have an old 250 GB Western Digital external hard drive.  Neither of my windows 7 machines recognize it.  It does not show in the device, Manager of the computer Manager or Explorer.  Any help would be appreciated.  THX Mike

    Hello

    Initially, check if the hard drive is compatible with Windows 7.
    Check out the link - http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx
    See the help article and check if it helps.

    My drive does not appear in Windows Explorer
    http://support.Microsoft.com/kb/330140
     
    Tips for solving problems with USB devices (this also applies to windows 7)
    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
     
    It will be useful.

Maybe you are looking for