Active Desktop Recovery - unable to restore the desktop computer

Similar Questions

• RDPCLIP. EXE missing startup file (system32 dir). Unable to restore the system because of missing file unspecified.

  Windows 7 (new machine, not updated). Autoruns shows this file RDPCLIP. EXE be found at startup. This file is usually located in the System32folder. Unable to restore the system of time earlier because of unspecified missing file (rdpclip.exe?). System seems to be runnuing normally except these two questions. Occasional freezes (once just by renaming the downloads folder). How can I get
  new file restored to the version of Windows 7?

  Note: CLIP.exe is in the System32 directory.

  Hi bigdome6984,

  If your machine acts as a Terminal Server, i.e. someone else connects to your computer using remote desktop, then rdpclip.exe will be loaded on your computer as part of the functionality of Server Terminal Server.

  RDSCLIP is loaded on the computer, allowing other machines to connect via Remote Desktop.

  It should be found at the following registry location:

  HKLM\SYSTEM\CurrentControlset\Control\Terminal Server\Wds\rdpwd\StartupPrograms

  Important Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756

  I hope this helps!

  Kind regards
  Gokul - Microsoft Support

• Computer broke down, unable to restore the old days of CS6 Creative Ste test. Can I download this new?

  Computer broke down, unable to restore the old days of CS6 Creative Ste test. Can I download this new?

  I tried, but after running the download assistant, get the message: the application could not be installed because an application already has with this name exists at the selected location. Try to install to a different location.

  It would be even possible to go back?   Or is my test of 12 hours over for good?

  Creative Suite cleanup tool

  Adobe Download Troubleshooting Wizard

  It may not work, though... The tests are sensitive to all kinds of what they perceive as attempts of forced entry...

  Mylenium

• InDesign CS4 using on iMac. EU to restore the backup computer. Licensing has stopped working. 150:30 error code. How can I restore my license?

  InDesign CS4 using on iMac. EU to restore the backup computer. Licensing has stopped working. 150:30 error code. How can I restore my license?

  You must install the Adobe programs since the original installation programs. Never migrate from a backup.

  Activation Adobe should detect a computer when the material has not been changed.

  If this isn't the case, you must contact Adobe support.

• Unable to restore the settings for WRT54G v. 2.2

  I have updated the firmware on my WRT54G v 2.2.  By following the instructions in "Guide Me", I have everything first to save the settings, then reset the router by pressing the reset button at the back of the router for 30 seconds.  However, when I tried to restore the settings, navigation and by opening the code.bin file saved on my desktop, I got the error message "invalid image file".  Now, I've lost my router settings, including the name of the network and secure settings.  How to restore settings, or if this is not possible how do I manually set parameters?

  Thank you

  Sam

  Look for this icon:

  

  In the left pane of Network and Sharing Center is a link manage wireless networks. Clicking on it leads to this dialog box:

  Remove the old network and select Add, just follow the wizard to match the settings you have on the wireless router.

  

• Recovery disks to restore the recovery Partition, laptop Aspire 7740-5691

  If I use the recovery discs (3) and the disk driver and application to re - install Windows 7 on my Acer Aspire 7740-5691 will restore the recovery partition. The recovery partition is 11,72 GB and 100% free space and in good health, according to the information in disk management. I don't know how the recovery partition wiped but the computer is running right now. The discs were made when I bought this computer about 5 years ago. The HDD is 320 GB, the processor is intel quad core i3, ram is 4 GB. Thanks in advance for your comments and information. Oscar1

  Acer erecovery media will restore your laptop to factory default, so, Yes, it will restore the original recovery partition too.

• Unable to restore the iPhone!

  I'm trying to restore my old iphone 5s so I can use the storage just for recording videos. First, I tried to restore the iphone settings. When he asks my apple ID password, I enter and then nothing happens. The password box just gray go button and stays there and I end up having to close the settings window of the thing of multitasking. I turned the phone off and tried again, but the same problem occurred. I then plugged the phone in iTunes and tried it that way, but he asked me to turn off my phone function discovery. I went into the settings on the iphone and tried to turn it off when he asked my apple ID password once again. I went in and the same problem occurred. The password box and gray buttons and I returned had to close the window of parameters with multitasking. It's kind of scary, given all that I want to do is wipe the phone of its stored in the memory and I can't do it again!

  Nevermind, I found the solution on this cool site!

  http://SmallBusiness.Chron.com/reset-iPhone-password-protected-70214.html

• Unable to restore the quality of the colors

  I'm unable to recognize the quality of the colors through the internet because I had visited many of the sites had color quality little or not at all. I can't recognize all the details pertaining to all sites including Web pages. Everything is white. What can I do to resolve the situation?

  Hello

  Are you facing this problem only in internet explore?

  Try to configure your 32-bit color quality (click on start-> settings-> Control Panel-> display-> settings). If you don't see a 16 or 32-bit, looking for your display drivers - click on start-> settings-> Control Panel-> system-> hardware-> Device Manager = check for any yellow exclamation next to the adapter chart or screen, if yes, you will need to install your display drivers.

  If you encounter this problem only with internet Explorer check colors in internet options explore-> open internet Explorer-> tools-> Internet options-> color-> only select 'use windows colors'-> Ok.

  I hope this helps.

• Unable to restore the previous version of Google Chrome on Windows 7

  I wanted to restore the previous version of google chrome. During this process in one step "preparing to copy" you can see here

  http://S32.postimg.org/s05lc8oc5/copy.PNG

  then I got the following message http://s32.postimg.org/9ufrvpik5/paste.png

  I hope you can see the pictures. If this isn't the case, please tell me.

  Help, please.

  Advanced thanks.

  Hello Zoya,

  I would like to know some information about the problem so that we can help you better.

  The current version of Google chrome causes any question? If so, what exactly is the problem?

  Thank you for details on the issue.

  I also know that the inconvenience that you are experiencing due to problem of Google Chrome. I will definitely help you.

  This problem can occur because corrupt Google Chrome files and settings.

  I suggest you to uninstall Google Chrome completely and then reinstall the previous version.

  To uninstall, please see this article:
  Reference:
  Uninstall Google Chrome - Chrome help
  https://support.Google.com/chrome/answer/95319?hl=en

  To reinstall the previous version of Google Chrome, please see this link:
  http://productforums.Google.com/d/topic/chrome/JCXuvM7Dfcg

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Unable to start the Vista computer, constantly shutting down once again

  I have to keep hitting the power button to the screen only lights so that it turns off again, again and again and more... It makes me crazy... It's a repair job shop or something I am doing wrong with a bad implementation... Thanks for any help... Ed McKenna

  * original title - why my screen always goes, black about 3 or 4 seconds after start *.

  Hello

  No saving necessary data and re-installing Windows Vista might be the best option, but here
  are a few others.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
  ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
  repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

• Cannot restore the portable computer Satellite Windows 8.1

  I have recently acquired some malware on my laptop, and after several failed attempts to remove it have decided to try to restore the device to factory settings.

  Unfortunately, I don't create backup media when the laptop was new and the recovery media creator appears only to create a cover for the system as it is.

  I tried to update the laptop using recovery tools built-in, but got an error "the drive where windows is installed is locked. Unlock the drive and try again."

  Then I tried a reset and got "failed to reset your PC. A required partition is missing. »

  I have created no recovery media when the laptop was purchased, do not not this.

  I don't have a system image 'clean' for a system image recovery.

  I do not have a restore point created earlier for a restoration of the system.

  Auto repair seems to only deal with problems of boot of the system, but still had an error "auto repair could not fix your computer" as I was trying anything at this point.

  Please can anyone offer any advise of any other route that I could take to restore factory settings.

  Thank you

  EH... it is a quite complicated situation now. Problem is that there is not a special workaround solution and you can not force installation of recovery image. Either it works or not.
  It is a pity that you don't l l create recovery media. It is the first step that everyone should do after the purchase of the laptop. This recovery media can be used in complicated situations.
  > Unable to reset your PC. A required partition is missing
  For some reason tool recovery doesn't have access to the recovery or recorded data recovery partition.

  What can you do now? To be honest, I see only one solution: order the new original recovery media for your laptop model. It can be done on https://backupmedia.toshiba.eu/landing.aspx

• Recovery of password on the new computer

  I just got a new 10 "laptop Toshiba and was tired when I typed in privacy.  I have the idea and know what the password should be... but he won't let me little matter what I do.  I tried caps, I tried to upper and lower case... tried almost everything.  It's only the second time I used the new computer and it won't let me.  What can I do to reset the password.  Well Yes... you guessed it... I don't have a backup disk.  Help!

  Since this is a brand new computer, just do a factory restore. You don't have anything about it at this stage and it will be less work to do the restore to factory to try and reset the password. MS - MVP - Elephant Boy computers - don't panic!

• I need help activating CS6 after transfer, I disabled the old computer but CS6 reactivate on new computer

  I followed the instructions online and disable CS6 on the old computer. But when I tried to activate CS6 on the new computer the Activate button is not available. I have all my licenses. How to use computer on the new CS6?

  have you installed cs6 in your new computer by using the installation files?

  If so, you enter your serial number when prompted during installation?

  If so, your cs6 is probably already enabled.  You can confirm by opening a program > click Help > and confirm activate is not clickable, but disable is clickable.

• Unable to restore the system, possible hard disk problems

  I started to have a white screen on startup and could not go beyond the apple logo. I ran the recommended repairs but could not manage to detect the operating system if the recovery console could see everything fine. The console suggested a repair disk I ran, but it seems to fail and goes to a blank gray screen.

  I pulled the drive and back up the contents of my PC and noticed them were three partitions showing in this regard. There was no problem of backup files as well so it seems that the drive is ok. After plugging it back in I tried internet recovery option and it only detects the HD recovery. I tried to erase disk02 but it does not work as well. I also use the restore option, but this also fails. I'm more used to the windows system restore and I'm not sure just what I might be missing.

  I have attached the photos on what I see, so hopefully that will help.

  http://imgur.com/a/nsyx8

  Enter the Recovery > disk utility. Select 1 TB HD Apple ST *, and then click Delete. Then click the Partition tab use arrow on the "Current" bar and select 1 Partition. Below you see a + sign or Options and will make this is the Table of Partition GUID. You will be he title Macintosh HD and Mac OS extended (journaled) and then click on apply. Now, you'll see Macintosh HD instead of the disk 0 sec 2. Select Macintosh HD, and then click Delete. Now, you erase Macintosh HD. It should be GUID Partition Table Mac OS extended (journaled). You should be able to put it in to your Mac you install El Capitan. Hope this helps you.

  Bravo!

• My home edition vista is continually updates configuration and then close. I can't stop it. I want to slate and wipe the hard drive but are unable to restore the system.

  How do I do a system restore with Vista Home basic when it is stuck on configuring updates?

  Hello

  You shouldn't have a system restore to fix this.

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista/Windows 7 with the Windows installation media and use the repair feature

  How to do a startup repair in Vista and Windows 7
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the system - Vista Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  This tells you how to access the system - Windows 7 Recovery Options
  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to do a system restore in Vista and Windows 7
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a disk of Vista or Windows 7.

  Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista
  x 64 64-bit.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/949358

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.