active enum entries, enums disabled in control and state machine accessibility


I have an enum of entry that can be anything.

In the vi, some enum States are 'disabled '.

The enum led a state machine that defines the output.


If an entry corresponds to a "off State" it will create an exit?


A 'disabled' in an enumeration element applies only to the dropdown list control allows you to manually select an option.  The program itself does not pay attention to State on or off selection passed around the nodes or son.

Tags: NI Software

Similar Questions

  • event and state machine


    I have a problem when I want to set up an event in my state machine.

    The state machine is reading communication series through different States 10 +.

    The problem came when I tried to add an event inside the State number 10. In the number of State 9 code seems to work only partially (an option button is not possible to change the value on).

    It seems almost that it is frozen but when I select the code I can see it works well (option button isn't).

    It is strange that when I remove the event in condition 10 all is well again? The event code is not yet performed yet because it is in the frame after!

    Any thoughts?

    I'm under LabView 2013 on a Windows 7 PC.

    I'm trying to figure out which of the two cases is the one who seems to hang if the name would be better than a number.

    When using am event structure you don't we want to use a local variable.  In fact, you should only use local variables on rare occasions that they break the flow of data.  The event structure is fine for the entry.  The problem is the way you treat things after that the button is pressed.  Again, I think you have to look at a design model of producer/consumer with a machine of the State in queue.

    The best way to have a writing occur only after a button must have the code for writing in a case that is active when the button is true and is simply empty, when it has the value false.

  • Shift registers and state machines

    I am creating a VI that controls a power supply, a switching system and a nanovoltmeter so that I can measure the Seebeck of different materials. After reading through these forums, it seems that the overwhelming opinion was that the state machine is much better than the structures of the cell, which was what I was going to initially use. However, I have a problem. To control my sourcemeter, I the user to enter the number of steps (time machine increases the voltage), a final voltage and output voltage. Of these, I get the value of the increment. However, within my state machine that the first step is transferred to the structure of the case. I used probes to see how information is moving, and it seems that the voltage value is increment correctly but the real VI for the power supply receives the initial value. I'm just wondering how to pass the updated values in the structure dealing with each iteration.

    I've included the vi. It is far from over because I'm sure you will see, but my current problem in the case of 'change v '. That said, if anything jumps out and you feel the immediate needs, feel free to say it, I learn and I accept all the entries.

    I recommend that you run your VI highlight execution lit.  This will help you understand what's happening better.

    Just to remind, only 1 case in structure can work iteratively.  If you have a TRUE/FALSE in the middle of a VI case structure you plan to run both cases?  Of course not.  Same thing here.

    So keep your current tension in a shift register and increment only when you are in the case of set.  Stop your state machine when your voltage exceeded the stop voltage (have a just State to check this box to make things easier).

  • Cannot disable Parental controls in Windows 7

    A few months ago I turned on "Parental controls" in Windows 7 and installed Windows Live Essentials which enabled Windows Live Family Safety.  Then set up controls on the connection of my sons account.  It worked well to block his access to select programs and Web sites.

    I now want to delete controls on his account and also completely disable Parental control, will have problems.

    I signed in to Live parental controls and turned off all the selections.  But his account still has restrictions and can not run programs that were previously blocked.  It is still block.  They work fine if I launch them from my Admin account or standard wife.  But not standard account of my son.

    If I change the 'provider' to 'None' then click on account of my son, I get the error msg...  "Impossible to make changes to parental controls settings. If the problem persists, see your system administrator.  UH... I am the admin.

    What I noticed is, if I look at the screen carefully when I click on his account, I see what I think, this is the screen adjustment "Parental control" or by a Commission for a half second before getting the error.

    I searched and tried different steps in this area and on the web. Most seem to want to refer to a Vista system, mine is Win 7.

    I did cmd level scans as "SFC/scannow", stopping the service and allow the account administrator by default to connect and try to leave, but none of these work.

    Even uninstalled the 'Parental control' part Live Essentials and no luck and reinstalled complete essentially no effect.

    I've been on before IE8, IE9 attended, so he just went back to IE8 with no effect (didn't expect not but just to try).

    In short, it seems that Parental control is glued ON and now has his hooks in my son's account and will not let go.  I don't want to delete his account and set up a new account, as this will work around the question for my son for now, but leave the service is running and the problem.

    My system is running Windows 7 Professional 64 bit.   My account is an administrator.  My son has a Standard account.  The programs work very well through other accounts simply not hers.

    So, how can I get out his account to parental authority and then how do I disable / stop completely, the Parental control itself?


    Hi FrolinMarek,

    Method: 1

    Configure the computer to clean boot and check how it works.

    To configure the computer clean boot, follow the steps in the below link:

    How to perform a clean boot

    Note: After checking in the clean boot, follow step: 7 article to reset your computer to normal startup.

    Method: 2

    Follow the steps below to disable the parental control for the specific user account.

    a. Click Start, and click Control Panel.

    b. click on user accounts.

    c. click on Parental controls.

    d. click the account for which you want to disable parental controls and select Parental control

    For more information on Parental controls discovers the following links.

    Parental controls in Windows 7

    Set up Parental controls in Windows 7

  • The custom Enum items turn on and off dynamically


    I use 6 controls Enum with the same elements and each enum seen 1. Analog-1, 2. Analog-2, 3. Digital-1, 4. Digital-2.

    Every moment that I have to select analog-1 in the two controls and four remaining checks, this element should be disabled.

    In the same way analog-2 in all four controls, Digital-1 and 2-Digital controls in all five.

    Please help me in this implementation.

    Kind regards



    The following code disables the analog-1 article on the enumerations of 2-6, when the enum1 analog-1 is selected. Yet, if you want to implement your idea in this way, you will need to create a great logic.

    Kind regards


  • Recover password and disable parental control

    I set up parental controls, but I want to turn it off. the problem is that I forgot my password. How can I recover my password and disable parental control?

    I set up parental controls, but I want to turn it off. the problem is that I forgot my password. How can I recover my password and disable parental control?

    We are not authorized to assists users bypass the password protection. Regardless of the reasons.

    Here is the link to the forum password privacy policy

  • Why the option "show me other ways to activate" in 'Screen of Activation Windows' has been disabled and grayout outside?


    My company PC have installed the version of 7-64 bit window, these computers are not allowed to connect to the internet for security reasons. On other computers phone allows us to make the windows activation. But on a PC, the option "Show me other ways to activate" in 'Screen of Activation Windows' has been disabled and grayed out out. Any suggestion to solve this problem?

    Thanks in advance.

    Try this method

    1) click Start and in the search for box type: slui.exe 4
    (2) press the ENTER"" key.
    (3) select your "country" in the list.
    (4) choose the option "activate phone".
    (5) stay on the phone * do not select/press any option * and wait for a person to help you.
    (6) explain your problem clearly to the support person.
    (7) the person must give you a confirmation ID, copy it down on paper,
    (8) check that the ID is correct in reading the support person.
    (9) to enter the ID number, then click 'Next' to complete the activation process.

    Activation and registration of a Microsoft product
    Windows activation: (888) 571-2048
    (888) 725-1047 or 800-936-5700

    How to contact a Microsoft Product Activation Center by phone

    Microsoft Activation centers worldwide telephone numbers:
    (This site is for activating Volume License, but if you call, they will help you)

    The phone number is not working:
    Microsoft Wordwide contacts:

    J W Stuart:

  • In Illustrator CC GPU acceleration still works after disabling "GPU Preview" and activation "Preview CPU" (on a workstation gpu)?

    I use a workstation graphics card which allows the GPU acceleration in Illustrator CC.

    By selecting 'GPU Preview' instead of "CPU overview" under the "View" toolbar in Illustrator CC results in a rougher experience.

    Which brings me to wonder:

    1. In Illustrator CC GPU acceleration still works after disabling "GPU Preview" and activation "Preview CPU" (on a workstation gpu)?
    2. Acceleration for my gpu GPU actually improves the performance for my work?

    Nope. You must have sighted GPU in order to get the boost GPU.

    The Quadro K series is on the supported list, so it is strange that having the preview turned on GPU cause lag. It should be the opposite where the CPU preview is jerky.

  • How relabel case designated enum in the state machine


    I have a state machine application in which typedef enum is used to refer to the names of the case.  Is there a faster way to rename one or more cases to match the typedef enum edited instead of having to rebuild each of them (the case structure loses all enum names if I try to edit in any way)?

    Thank you in advance,

    Oliver Barrett

    One thing to add, once your custom/constant in your block diagram control, if you decide to add a new case after case is added, you can simply go file > apply changes in the control to customize window and they will all up-to-date in your block diagram.

  • I have a Win 7 Home Premium activation problem. I ran Belarc Advisor and received the product key, but it won't turn on; I ran the MGADiag tool. Here is the result: Diagnostic report (1.9.0027.0):

    Diagnostic report (1.9.0027.0):
    Validation of Windows data-->

    Validation code: 0
    Validation caching Code online: n/a, hr = 0xc004f012
    Windows product key: *-* - 73KQG - K3FTD-B6V4T
    The Windows Product Key hash: bvWfIY02r4V73iAUwr7YDptieiA =
    Windows product ID: 00359-032-9544204-85833
    Windows product ID type: 5
    Windows license type: retail
    The Windows OS version: 6.1.7601.2.00010300.1.0.003
    ID: {D6836677-F995-4728-A7E7-6237622EB868} (1)
    Admin: Yes
    TestCab: 0x0
    LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Product name: Windows 7 Home Premium
    Architecture: 0x00000000
    Build lab: 7601.win7sp1_gdr.120330 - 1504
    TTS error:
    Validation of diagnosis:
    Resolution state: n/a

    Given Vista WgaER-->
    ThreatID (s): n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002

    Windows XP Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002
    OGAExec.exe signed by: n/a, hr = 0 x 80070002
    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->
    Office status: 109 n/a
    OGA Version: N/a, 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default browser: C:\Program may Explorer\iexplore.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->

    Other data-->
    Office details: {D6836677-F995-4728-A7E7-6237622EB868}1.9.0027.06.1.7601.2.00010300.1.0.003x 32*-*-*-*-B6V4T00359-032-9544204-858335S-1-5-21-2584338913-1955297478-615780619Hewlett-PackardHP Pavilion dv9700 Notebook PC Hewlett-PackardF.2A 20080222000000.000000 + 000EA513507018400FE04090409Central Standard Time(GMT-06:00)03HPQOEMSLIC-MPC109

    Content Spsys.log: 0 x 80070002

    License data-->
    The software licensing service version: 6.1.7601.17514

    Name: Windows 7 HomePremium edition
    Description: operating system Windows - Windows (r) 7, retail channel
    Activation ID: 2e7d060d-4714-40f2-9896-1e4f15b612ad
    ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 00359-00170-032-954420-01-1033-7601.0000-2482012
    Installation ID: 003831655321138975382172967493670240426664924036326054
    Processor certificate URL:
    Machine certificate URL:
    Use license URL:
    Product key certificate URL:
    Partial product key: B6V4T
    License status: initial grace period
    Time remaining: 42660 minute (s) on (29 day (s))
    Remaining Windows rearm count: 4
    Trust time: 04/09/2012-12:17:34

    Windows Activation Technologies-->
    HrOffline: 0x00000000
    HrOnline: n/a
    Beyond: 0 x 0000000000000000
    Event time stamp: n/a
    ActiveX: Registered, Version: 7.1.7600.16395
    The admin service: recorded, Version: 7.1.7600.16395
    Output beyond bitmask:

    --> HWID data

    Activation 1.0 data OEM-->

    Activation 2.0 data OEM-->
    BIOS valid for OA 2.0: Yes
    Windows marker version: 0x0
    OEMID and OEMTableID consistent: Yes
    BIOS information:
    ACPI Table name OEMID value OEMTableID value
    TCPA Phoenix x

    Partial product key: B6V4T
    License status: initial grace period
    Time remaining: 42660 minute (s) on (29 day (s))

    Remaining Windows rearm count: 4
    Trust time: 04/09/2012-12:17:34

    Have you tried to restart by phone?

    How to activate Windows 7 manually (activate by phone)
    1) click Start and in the search for box type: slui.exe 4
    (2) press the ENTER"" key.
    (3) select your "country" in the list.
    (4) choose the option "activate phone".
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
    (6) explain your problem clearly to the support person.

  • Cannot disable automatic downloads and get a persistent notification "automatic downloads are not enabled on this device.

    Whenever I have to unlock my iPhone SE I get notification, "the automatic downloads are.
    ' not activated on this unit, to enable them, go to store settings. When I
    Click ok, I find that the automatic downloads are already activated. If I turn off
    them and outputs, the next time I come back to this screen, they have been reactivated.

    In addition to this, no matter how many times I turn it back on
    them, lock and unlock my phone, power off and power on my phone, and
    enable/disable notifications from App store, I always get this notification
    each. unique. time.

    Anyone recognize this? Troble shooting? How can I get rid of this?



    Take a look at this article, it may help you to turn automatic downloads - Apple Support

  • Disabled iPad 2 and Apple ID

    Hello world

    Nice day.

    Just want to ask if there is a way or hopefully Apple Support will give information (phone number, Facebook, etc.) on the former owner of the device.

    My family bought a second hand iPad 2 five years ago.

    A week ago, she has disabled his iPad and we tried to restore it.

    After the restoration, the iPad is prompting of apple ID and password. She told me that she cannot remember the ID and password more.

    In addition, she told me that she is unable to contact the previous owner more.

    Appreciate your help on this.

    Thank you.

    N ° Apple will not provide this information.

    You must contact the seller and ask him to remove this iPhone in the devices list. Otherwise, your iPhone will be a useless brick.

    Find my iPhone Activation Lock: a mechanism of extraction of the previous owner - Apple Support

  • All entries are disabled after a hibernation.

    I'm running OS X 10.11.2 (later) on a brand new Mac Mini. My user inputs include a new magic trackpad, an extended wired USB Apple keyboard and a Yiynova 19 "monitor shelf. I have also connected LG DVD player and a Dell monitor.

    For morning several courses, then an attempt to wake my Mac, all user entries are disabled. By turning the trackpad and turn it back on don't reconnect the bluetooth trackpad. Disconnecting and reconnecting the USB cable for the Yiynova or the keyboard reconnect or the other device. Neither Exchange cards. None of these actions don't restore the connection or turn it back on the Mini. To reactivate it, press the power button once. Once sound awake, monitors here and I can see the login screen, but none of the input devices work.

    Yesterday I reset my memory nvram, but freezing this morning said that it did not work. Also, I've caught a mouse wired mighty and plugged. Laser lit, so CERTAIN powers flowed, but followed and clicking on did not work. I say 'certain' power because I plugged in my iPhone to USB cable, as well the the keyboard port and directly to the Mini, and I get no indication that the device sees the phone, and load on the phone indicator lights, so the phone is not receiving power. If it wasn't for the light of the mouse, I think that the ports have been completely extinguished.

    The only thing I found which restores all features is a hard reboot (obviously with no way to record anything that could open).

    I've seen some slightly related posts suggest to reset the SCM, however, nothing in the SMC real document said that these symptoms or systems are connected to the MSC.

    Does anyone have other ideas?

    Just like the top of the head.

    In fact, I tried resetting the SMC as well, and that did nothing.

    However, a few days earlier, the last update of Mac OS came thru, and since the update, the problem seems to have cleared up. I noticed that one of the things that precisely fixed update was a bug where 4K displays would bring the Mac not to wake up. While I don't think that one of my monitors qualifies as a 4 K screen, its possible that I was touched by the same bug. Who know.

  • problem with tab structure control and event


    My program has a tab control. In each tab, I have an event structure to control some events.

    I encountered some problems. These are:

    1. in each tab, I set tab as an event control, to altogether from the structure of the event as tab change (for example, the image below). My first problem is that when I change the tabs, in the arch depending on whether my program is entered in the next tab environment, happening at the event: change value to main tab! And gives bad result.

    2 - I've scheduled two final tabs as below in the image. I had no routine in these two tabs. Simply, I want when I change the tab, it goes to the next case of the tab control. But when I run the program, it goes to something as busy after one or two changes tab and did not work properly.

    Could someone help me please?

    Thanks in advance


    Rebecca wrote:

    I want to have 4 tabs, each tab having 3 Boolean control.

    If in each tab all Boolean control wins 1, a Subvi should be run.

    I wrote this code with some time within each tab loop this case hase 3 for each Boolean control. The result is true.

    But I think that if I write it with a structure of the event within each tab instead of 3 cases, the cpu load will be lower.

    Is it not true?

    Make a unique Structure of the event.

    Add events for all controls (buttons, Boolean)

    When the event is triggeredcheck for active tab control and decide what void / vi to run

    It will work fine you

  • How do I get the name of a duplicated or created control and add a reminder

    Hi all

    According to the number of entry points I need, I duplicate a digital or an input string to the DuplicateCtrl function. My question is, how do I get the name and id of the control that has been created, and how can I assign a callback to it? Alternatively, it would be better to create a fresh ctrl instead of duplicate?

    Thanks in advance!

    Hi TurboMetrologist,

    Why are you trying to get the name of constant control? Remember that you cannot use this name to address control; control names are in fact simply the macros in the file associated with the UIR, include in other words, the preprocessed compiler code and everywhere where the names of PANEL_CONTROL replaces the digital value as parameters to functions (and therefore 'control' parameter is an int value and not a char *)

    That's why NewCtrl () or DuplicateCtrl () functions return a control ID: this is the handle to the new object, the only way to handle it. You will need to store this handle in a nonvolatile memory so that you can access durng life program.

    In addition, there are other ways to assign a meaning to a control to pass on the name of constant control. For example, you can use the callbackData parameter to differentiate the different copies of a control.

    Let me explain with an example. You said that you need several entries (dynamically created that you don't know in advance how many of them use); a solution could be:

    • Design a master copy of a control in the IUR Editor, where it is easy to customize; also assign a callback function, if it must be common to all copies of the control
    • Assign a value to this control callbackData, programmatically for example SetCtrlAttribute (...,..., ATTR_CALLBACK_DATA, (void *) 1);
    • Duplicate the control, and then assign a different callbackData
      for (i = 2; I have< 5;="" i++)="">
      handle = DuplicateCtrl (...);
      SetCtrlAttribute (..., handle, ATTR_CALLBACK_DATA, (void *) I);

    By operating this way, whenever the reminder of control is triggered by any control, it will receive the callbackData assigned, and you will be able to differentiate your code with a simple switch:

    switch (callbackData (int)) {}

    case 1: / / the master controls


    case 2: / / first dual control



Maybe you are looking for

  • I can't open the images in Yahoo mail with 7 Firefox, but IE works.

    After several years of success with Yahoo mail and Firefox, I can longer open mail of Yahoo (jpg, bmp) images. I can open them in gmail with Firefox or IE. I can open them in Yahoo mail using IE. I am running Firefox 7.0.1 and I think, but am not sur

  • last update is not suitable for my OS

    I continue to receive requests to update my version of firefox, whenever I wake up from my computer, but I use a Power PC and the latest version is not compatible. Please, create a version that will work with OS 10.5.8 or difficulty of updating eithe

  • Laptop HP 14-w008la

    Hi, I would like to know if this laptop can be upgraded to 12 GB of RAM, the laptop comes with 4 GB in a slot and the other location is available, therefore, the plan is to put a new module of 8 Gb. thank you

  • How can I get brother MFC-7420 off mode 'sleep'

    How can I get off Brother MFC-7420 mode "Eve".  Does not print. Help, please.

  • Update of security causing problem

    July 15 security updates caused my computer does not recognize is not the secondary hard drive, which is the cd-rom drive, ideas on how to fix? I am running XP.