Active field adjustment
Is it possible to programmatically set the active field to a string control box so that the cursor is already in place and the user is not to choose the area with the mouse to start typing in there?
First he puts the 'key' true Focus
If TRUE, the control has the focus keys and receives the keys on the keyboard.
There are Text.Selectiontart and: end if you want to highlight and write what is perhaps already in control of the chain
Tags: NI Software
Similar Questions
-
Mr President.
My worm jdev is 12.1.3.0
Can we fix the width of the lines of af: PanelFormLayout, so that the inputText fields adjust line width?
When I put a viewobject as a form with two rows in the panelbox, then the inputtext fields have different widths to disturb the box width of Panel and the distance between two lines increases.
I want to keep equal with the panelbox two lines of formatting Panel.
Concerning
Select your inputText on pageEditor go to inspector and set width: 150px; in the contentStyle property
check -binary: customization of the width of a UI control using the contentStyle attribute
To set the width of the Panel form layout set in the inlineStyle property
Ashish
-
Update active field in flex active with JSP tags
Hello coders.
I am facing some problems when you try to set a field (field of active type) and then saving them, with WCS JSP tags.
The assets I am tempting to save is an asset of flex, I have found online and test the same business with the base, all assets very well. But with active flex, I just can't handle.
Does anyone of you can share a snippet as a reference?
Kind regards
Hello
I don't think that there is any particular jsp tag update Active flex. A certain attribute can be updated for flex assets using ics: catalogmanager, yet once, it is recommended not average at all.
So it's best to use Asset API (update section) discussed here - http://docs.oracle.com/cd/E29542_01/doc.1111/e29634/asset_api_tutorial.htm#WBCSD2403
I have not tested but for your case, I think following should work (first check the implementation in a test environment):
a.getAttributeData("_
_").setDataAsList (tables. asList (new AssetIdImpl (" ", ))); In addition, do not know if active flex can be updated & saved by using the combination of tags - asset: charge, asset: together and active: save
Kind regards
Guddu
-
When I do a generic custom component the largest two graphics that make up the component is used as the "Activator." For example, I and that image when you go over it, he Faints, and a larger version of this image is fading. The question is if the cursor anywhere in that enlarge the image would exceed, it activates the fade effect. When I want that it to fade if it is hung over the small image.
Is any way to work around this problem, or is it just how it is?
Hi xianxou,
In the State of your component custom with the small image (I guess that the State 1)...
-In the layers panel, show the enlarged image (it is the interaction triggering when you don't want it)
-Select
-Press the delete key.
Now run your project. The enlarged image is now 'not there' so it shouldn't interfere with the rolling.
It's a little hidden, but these three actions have different consequences...
Disable the preview of an element using the eyeball in the layers panel (he hides for that State)
Removing an element using the keyboard (removes the element of the State)
Selection of an item in the layers panel and pressing the trash can (completely removes your list layers and the whole project)
Hope this helps,
Ian
Catalyst team
-
Everyone knows the same? Any resolution?
Turn off the Suggestions of Safari in the preferences/Safari/search / uncheck Safari Suggestions.
Latest issue of the Safari search bar
http://osxdaily.com/2016/01/05/fix-Safari-freezing-address-bar-use/
-
I have 11 assets who have the status of "upload" next to them. Does that mean exactly? The images seem to work okay, apart from a few glitches, and I don't see anyway to update or change the status of these assets.
I don't know if it is connected to a problem I'll have to make some images to display, but it's kinda a coincidence that the problem file has "upload" next to him in the assets. Is there something that I am missing?
Hello
When you link a file to a hyperlink, or add files to download (on the file menu). It is added to the asset with the location "Upload."
He must not come into conflict with the display of other images.
Try to remove the image and add it again.
Kindly let me know if you need additional assistance.
Concerning
Sonam
-
Can I define a field that summarizes a group of checkboxes?
I have a few groups (Group 1, group 2, etc.), the boxes where any number of boxes (Item1, Item2, Item3, etc.) can be controlled. Let me summarize all of the selections of each group in a summary field. For example: If the Group1 items 1, 6 and verified 17, I want the summary field for 1 group to say "Item1; Item6; Item17. Is this possible? If so, the code would be must be included in each box properties or the summary field only, or both?I use Adobe Acrobat Pro XI on Windows 7 Professional.
Thanking you in advance for any help on this.
A lot of how you created and coded the boxes will determine how the code should work.
I can create checkboxes with very specific domain names or use a generic name one number fields. I could do a checkbox named "Gropup1" and then use the "create multiple copies" and create a series of check boxes named "Group1.0", "Group1.1", "Group1.2", etc.. Then, I put the value of export for each field. This type of domain name is known as the hierarchical naming. I can now use the getField method to get the name at the top, 'Group 1', to get this group object. Using the method "getArray()" can I create an array of objects field in the "Group1", using this table I can program a loop to test each field in the Group and push each 'Off' no value in a table. Using the method of 'join()' I can create a list of the values in the active fields. It is even possible to create a function to use high standard name and return a list of values for the fields enabled in this group of fields. Then just call the function with parameter the name at the top and I can fill in the summary field for this group.
An example:
I create a function of level document with the name of 'GroupResult' and the following code:
function GroupResult (cName) {}
var oGroup = this.getField (cName);
var aGroup = oGroup.getArray ();
var aResult = new Array();
for (var i = 0; i)< agroup.length;="" i++)="">
If (aGroup [i] .value! = "Off") aResult.push (aGroup [i] .value);
} / / end of loop for table fields.
return the list of items selected;
Return aResult.join (",");
}
I have a group of checkboxes name 'Group1.0', 'Group1.1', 'Group1.2' and 'Group1.3' all with unique when values checked and I have a text called "ResultsGrop1," field
The script for calculating customized for the text field would be:
Event.Value = GroupResult ("Group1");
If I had another group of boxes labeled "Group2. "#" would be JavaScript customized to the text field:
Event.Value = GroupResult ("Group2");
It makes no difference how much check each group boxes script will adjust the number of check boxes in the group.
-
In bulk 2.0 - link activity EmailClickthrough
According to the new documentation in bulk 2, I am able to get the URL of a link clicked in an e-mail message when you export data on the activities out of Eloqua.
That's my definition of export:
{
'name': 'Test ',.
'fields': {}
'type': "{{Activity.Type}}"
'contact': "{{Activity.Field (EmailAddress)}}"
'link': '{{Activity.Field (EmailClickthruLink)}}.
},
'filter': ' "{{Activity.Type}}" = "EmailClickthrough '",
"dataRetentionDuration': 'PT1H."
'autoDeleteDuration': 'PT1H.
}
The synchronization ends with an error with the following logs:
[{: syncUri = > "/ sync/276 ',}]
: County = > 0,
: gravity = > 'error ',.
: statusCode = > 'ELQ-00107. "
: message = > 'There was an error in treatment of export.',
: converted = > "" 2014-05 - 27 T 21: 31:58.4700000Z '}, "
{: syncUri = > "/ sync/276 ',}
: County = > 0,
: gravity = > 'information ',.
: statusCode = > 'ELQ-00101.
: message = > "Sync treated for sync 276, resulting in an error state."
: converted = > "" 2014-05 - 27 T 21: 31:58.4700000Z '}] "
Can you please let me know what I am doing wrong?
Thank you
Ilya
ilyahoffman and jramynke - use EmailClickedThruLink rather than EmailClickThruLink. It's a question of documentation we currently set.
-
Hello everyone,
Therefore the week with me to have problems of rule files. I am loading a rule file that contains a date field in it as seen below:
I made changes to my plan to allow typical steps and changed the date format as shown below:
If I try to load this rule and ignore the field 'entry date' my file works fine. Whenever I'm trying to load the rule with the active field it will not load anything and I get the message following (warning) with no error log:
LoanASO.Loans of corrupted database
Out of the prepared columns: [0]
Rule reading information SQL for the database [credits]
Rule of reading of the purpose of the database rule [credits]
Active parallel loading: [1] block to prepare the discussions, block [1] write discussions.
Global storage applications ignore update derived cells. [3] cells sautéed
Data loading up with [LoanLoad.rul]: [0,608] seconds
Completed import data ['LoanASO'.'] Loans]
Out of the prepared columns: [0]
Load data buffer commit elapsed: [0.016] seconds
Completed import data ['LoanASO'.'] Loans]
Out of the prepared columns: [0]
Someone at - it ideas?
A test, I manually load a date via smartview in my intersection and the exportation of essbase looked like the following:
"Loan Principal GL'"effective Date. "
"Dec', 'FY14' '098' 'L1' 'Act'"RR5' 'Active' "GL-4002" "Type-14" "1e2" 340849.45 "#Txt:12/31/2014" "" "" "
I see that when I export it comes in a different format "#txt:12/31/2014" so I didn't know if I need to load different data.
Also, I want to just take a big thank you to all those who respond to these positions. I find this invaluable community and I hope it will be able to contribute more I become more proficient in Essbase and planning.
Thank you
Bret
Well, I finally got it and I think I learned my lesson here. What was causing it was in the order of my articles. One of my size was before my data so there get confused. I need to be more careful of the order of my rules files I guess.
Thanks for all your replies again,.
Bret
-
I place "Name of the signatory" field, but it is not visible to him when he opens the document (the participant is chosen correctly). Could you advice settings please?
The "name of the signatory" field is not an active field for the signatory to interact with, so that they see a box in the document for them to type. It is automatically filled in with the information that is entered at the time of the Signature field.
-
How to change the fill color of a field from another field condition
I wish I had a field turns red if the value of another field is greater than 0.2 and would like to know in what format the fields should be.
I have this code in the text field properties > custom calculation script field, but it is funny:
var x = getField("fill_35").value
If (x.value > 0.2)
event.target.fillColor = color.red
And the size of the active field is set to 'None' and 'fill_35' is set to 'number '.
Furthermore, "fill_35" is the difference between the other 2 fields.
I have this code text field properties > custom calculation script field for 'fill_35'.
var v1 = getField("Locked.25").value;
var v2 = getField("Locked.49").value;
If (v1! == ' ' & & v2! == "")
Event.Value = v1 - v2
on the other
Event.Value = "0.00".
Help, please. Thank you in advance!
Have you checked the JS Console to find errors? You can share the file in question?
-
How can I update the field when the enabled checkbox
Hi all
I am using oracle 10 g forms,
I have a block with 20 areas. So first 10 fields are not editable and remaining are editable. If the user enters data and modifies the data. And check the box and save the data.
Inside save button I wrote the code update.
When the user change records of two or three and three check box and click on save button only a recording is done in my custom table.
It's my code please correct me where I went worng.
It's my code inside my button
declare
Begin
If: ASSEMBLIES_BLOCK. CHECK_IN_OUT = 'Y' THEN
IF SHOW_ALERT ("UPDATE_ALERT") = alert_button1 THEN
LOOP
XXTLX_PO_LOGOSTICS. XXTLX_PO_LOGOSTICS_UPDATE;
WHEN THE OUTPUT: SYSTEM. LAST_RECORD = "TRUE";
NEXT_RECORD;
END LOOP;
STANDARD.COMMIT;
fnd_message.set_string ("Transaction saved successfully");
fnd_message. Show;
On the other
NULL;
END If;
END IF;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
NULL;
WHILE OTHERS
THEN
NULL;
END;
I write a procedure in the program unit.
XXTLX_PO_LOGOSTICS. XXTLX_PO_LOGOSTICS_UPDATE
Is my block of current assemblies that the user enter data and click the save data check box.
Update XXTLX_PO_ASSEMBLIES set CASE_NO = nvl(:assemblies_block.) CASE_NO, Null),
PACKAGE_TYPE = nvl(:assemblies_block.) PACKAGE_TYPE, null),
PACKAGE_QTY = nvl(:assemblies_block.) PACKAGE_QTY, Null),
GROSS_WT = nvl(:assemblies_block.) GROSS_WEIGHT, Null),
OPI_DATE = nvl(:assemblies_block.) OPI_DATE, Null)
Where ponum =: DETAIL_BLOCK. PO_NUMBER
AND PO_LINE_NUM =: DETAIL_BLOCK. LINE_NUM
AND BOM_NO =: assemblies_block. BOM_NO;
So when we click on the multiple check box and save the data that one is striking.
Thanks and greetings
SrikkanthI guess that I do not understand.
>
... my requirement is that active fields must get updates. If there is way to 10 records in a block, sick day only registration of the 3rd and 4th and then click on the box... and then ill click on save button.
>Is - this block a block of data or a block of data non-base? If it is a block of data, Oracle can manage updates of this block for you because if keep tabs if a record has been updated or not and you wouldn't need to do an UPDATE statement.
If it is a non-base of data block and you are a loop in each folder and only update items that have checkboxes next to them you would still go to the first record, and then scroll through each record and see if it needs to be updated. I guess right here because I don't think I have a good knowledge on what you're doing, but you can change your XXTLX_PO_LOGOSTICS. Package XXTLX_PO_LOGISTICS_UPDATE update only elements that have checkboxes next to them, by checking every box:
-- Check Case No if nvl(:assemblies_block.chase_no_check,'N') = 'Y' then update xxtlx_po_assemblies set case_no = :assemblies_block.case_no where ponum = :detail_block.po_number and po_line_num = :detail_block.line_num and bom_no = :assemblies_block.bom_no; end if; -- Check Package Type if nvl(:assemblies_block.package_type_check,'N') = 'Y' then update xxtlx_po_assemblies set package_type = :assemblies_block.package_type where ponum = :detail_block.po_number and po_line_num = :detail_block.line_num and bom_no = :assemblies_block.bom_no; end if; -- Check Package Qty . . .
-
Need the value of exports in another form field
I have a few menus each with unique export for each drop-down selection value.
I need to have the value of exports as an entry for another form filed once a choice is made.
E.g.
Drop-down menu:
Choice1-> export-> value
Lendemain2-> export-> B value
3-> export-> C value choice
Choice4-> export-> D value
Filed entry form will be one of the chosen export values.
Any ideas to make...
Use this code as the calculation script customized to the text field (adjust the name of the drop-down list):
Event.Value = this.getField("Dropdown1").value;
-
Mandatory field accepts no input
Hello-
I'm sure it's something pretty basic. I have a CFINPUT field a Flash form with the "required" attribute set to "yes". If I submit the form with nothing in the text box I get the red outline around the box, but am so prevented to enter data in the field, or any other area on the form. I have to reload the page just to be able to make the 'active' fields again. Any suggestion would be appreciated.
-Tom Tedeschi
< name cfform = "insertAbstract_flash" height = "1800" width = "750" format = "Flash" skin = "HaloSilver" timeout = "6000" ACTION = "spellCheck_flash.cfm" METHOD = "POST" > "
< cfinput type = "Text" label = "Title" name = "Title" required = "Yes" width = "500" MAXLENGTH = "150" >
< cfformitem type = "spacer" height = "5" / >
< cfformgroup type = "horizontal" >
< cfinput type = "submit" name = "submit" width = "160" value = "Move forward for the spell checker" >
< cfinput type = "reset" name = "reset" width = "100" value = "Reset fields" >
< cfformitem type = "text" > (Note: do not click until you have gone through ALL tabs) < / cfformitem >
< / cfformgroup >
< / cfform >
Figured it out:
He was at the height = "1800" width = "750" plug to the CFFORM Tag. I just put in bags the specification of the height and everything works fine. Go figure.
-TRT -
Windows XP with Firefox 18.0.1 does not open when upgraded to the latest version.
Error messages have been
(1) the procedure entry that point pr_setcurrentthreadname could not be located in the dynamic library (2) ndpr4.dll the procedure entry point NSSUTIL_EscapeSize could not be located in the dynamic links (3) library nssutil3.dll was not able to load XPCOMA ran malware & anti-virus software then deleted Firefox via Control Panel, then residual file file C:\Documents & Folders\ApplicationData\Mozilla Director and program folder.
Local & installed products ndpr4.dl and nssutil3.dll - fresh reinstall firefox several times - he got rid of the error message 1 but not 2 or 3 always cannot open Firefox.
All solutions?I have this problem and I use Zone Alarm Extreme Security with Force active field. I found that by turning off the virtual Cache in Zone Alarm that this problem has disappeared and has been able to restart firefox.
Here is a post I found that addresses the issue in some way. http://KB.mozillazine.org/Browser_will_not_start_up#Firefox_does_not_start_after_updating_with_ZoneAlarm_ForceField_enabled
Maybe you are looking for
-
Adobe Flash Plugin crashing!
Hi all! My adobe flash plugin keeps default! And never send the crash error report. Your tutorial did not work ethier. Please can anyone help solve this problem. I am running on Windows 7 and am unable update whatever it is (I don't have administrato
-
How can I get a new copy of Firefox so that MyWebSearch has all its deleted extensions?
HelloI was told I had to download a program that installs MyWebSearch extensions in Firefox. My search in Google is now totally wrecked that I can't just type the keywords in the bar an address. I tried to change the ListingURL using the subject: ser
-
waveform, with an average of results using labview to O-scope
Hello fellow engineers! I'm a first-yeargraduatestudent in CHEE at the University of Houston. Basically, I know nothing about labview. I am trying to program an application that looks like this - I collect a waveform of the signal of O-scope. This wa
-
P4G35EA #A #CQ: wifi is lost after upgrade of the system
My system alerted me to the HP update and after the update was done, my system can no longer connect to my wifi.what is the solution? Please help.
-
(Redirected) Impossible to reconnect using Office WinXP SP3
What does it mean when the screen flashes "DELL SELF TEST FEATURES"? WHY I CAN NOT CONNECT with the office, but I can connect with the laptop? Help!