Active wireless adapter, but does not connect

Similar Questions

• Unable to connect mifi 4510 hotspot for PC. Wireless see peripheral but does not connect... is to expire.

  mifi4510L

  Unable to connect mifi 4510 hotspot for PC. Meet operational requirements throughout the system. Using XP SP3. Wireless see peripheral but does not connect... is to expire. No msg error in Event Viewer.

  THX

  Hello

  I suggest you to try the steps below and check if it helps.

  Method 1: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2: Try also to update the latest drivers for your device wireless using the link below.

  How to manage devices in Windows XP:

  http://support.Microsoft.com/kb/283658

  Hope this information is useful.

• You cannot be activated because the iPad does not connect to the server

  You cannot be activated because the iPad does not connect to the server. I was told to come to the address in internet apple.com/es/support and do not see it as the solution. Can someone help me

  What is the wording accurate and complete error message?

  If she says the activation server cannot be reached/contacted

  There are 4 possible causes for this error message:

  1] activation server is actually down. Very rare and of short duration when it

  Sometimes. Solution - try again.

  [2] your firewall and/or antivirus software preventing the necessary connection. Solution-

  temporarily disable your firewall and/or antivirus software, up to the end of the activation.

  [3] computer used for activation has been used to jailbreak an iOS device in the past.

  Solution - use another computer.

  [4] iPad has been jailbroken. Your favorite search engine can provide indications but often prevent jailbreaks

  the activations/updates to succeed. By the terms of use of this forum, discussion on jailbroken iPad is

  prohibited.

• Windows Vista detects the wireless network but will not connect to it. Two other users in the same office connect without difficulty.

  The title says it all really.

  I was connected and working normally for about an hour this morning, until suddenly the connection has been lost.
  Windows detects the wireless network but will not connect. Two other users in the same office connect without difficulty.
  Help, please.
  Thank you.
  original title: vista detection network but will not connect

  Hi JulianBeach,

  1. you have made no changes to the computer before the broadcast took place?
  2. What is the exact error message you get?
  3 is connected to the domain of the computer?
  4. what happens when you try to connect to the network?

  Try the steps from the following link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

• I had to use restore on itunes on my ipod and now it shows on my list of computer peripherals, but does not connect with itunes.

  I had to use restore on itunes on my ipod and now it shows on my list of computer peripherals, but does not connect with itunes.

  Original title: ipod

  You may be better to ask on the Apple Support Forum - https://discussions.apple.com/thread/1577894?start=0&tstart=0 (example)

  See also - http://support.apple.com/kb/TS1363

  It will be useful.

• Atheros AR9285 in CQ61-410US wireless network card does not connect to the Internet after the update of the adapter driver

  I have a Compaq Presario CQ61-410US (WA974UA) which is equipped with an Atheros AR9285 B/G/N wireless network adapter.   The laptop Internet access was fast and stable when using a Wi - Fi N.   Its pilot AR9285 was the initial version of the 8.0.0.172 factory.  But because there were so many subsequent driver updates, I've updated the display driver version from the support page 8.9.9.316 (sp48755.exe).  However, after updating the driver, I immediately lost Internet access.   The laptop is running Windows 7 Home Premium with Service Pack 1 and 64-bit.

  The driver seems to be installed OK, but it does not connect to the Internet.  Here is the status of the driver: 1) in Device Manager it appears OK and is presented as working properly.  (2) in the results of IPCONFIG/all, it there is no entry for the wireless adapter and without IP addresses are affected.  Here are the results of the IPCONFIG/all command:

  C:\Users\Karen>ipconfig/all

  Windows IP configuration

  Name of the host...: KarensLaptop
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Ethernet connection to the Local network card:
   
  State of the media...: Media disconnected
  Connection - a DNS suffix is specific. :
  Description...: Realtek PCIe FE Family Controller
  Physical address: 00-26 - 9th - JJ - 83 - 9 c
  DHCP active...: Yes
  Autoconfiguration enabled... Yes

  Tunnel adapter isatap. {E52D6F3E-5080 4B3B - 8BE7 - B7CFD7E137D1}:

  State of the media...: Media disconnected
  Connection - a DNS suffix is specific. :
  ... Description: Microsoft ISHTHP adapter
  Physical address: 00-00 - 00 - 00 - 00 - 00 - 00 - E0
  DHCP active...: No.
  Auto connection...: Yes

  Map of tunnel Teredo Tunneling Pseudo - Interface:

  State of the media...:...: media disconnected
  Connection - a DNS suffix is specific. :
  ... Description: Teredo Tunneling Pseudo - Interface
  Physical address.... : 00-00 - 00 - 00 - 00 - 00 - 00 - E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  C:\Users\Karen >

  (3) Trying to Connect through connections network does not a list of known available networks and instead says "not connected - no connection is available."

  I have read several messages from the HP Forum and tried a lot of things, including the installation of various updates driver later thanks to the version 10.0.0.222, but I still can't the driver to connect to the Internet.  I also changed my router "n" has only B/G as the AR9285 pilot has a history of problems with Wireless N.  Even back to the original driver version 8.0.0.172 provides an Internet connection.

  Any advice would be appreciated.

  Hello:

  I'm glad that you were able to restore your internet connection.

  I'd go with the latest driver HP vice one from another source.

  The only time wherever I go outside HP for wireless network drivers is if you have an Intel wireless card.

  My recommendation is to use the free MS Security Essentials antivirus/antispyware, which never interfere with how "things important works" on your PC, such as network connections.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201

  Your router with a hardware firewall and a software firewall Windows. I don't see the importance of adding other firewalls.

  Unless you have a lot of albums secret info on your PC that pirates would like to get my hands on, these fully functional security roadblocks are adequate for most of us.

• OfficeJet pro 8600 more connects wireless, but does not connect to Internet

  I use Windows 7.  The free thread is ideal for printing, but I do not understand why the web

  does not connect.

  Hi susea;

  Hope you are doing well and I'm sorry that you are having problems.

  Jean-Marie this tool;  http://support.HP.com/us-en/document/c02037530

  If that didn't help then share what router you're using, please indicate brand and model? I'll offer to make sure that your router is updated with the most recent firmware, also I personally always use Google's DNS servers. Some servers DNS provided by your ISP (Internet service Provider)

  You can change this setting by going to do the following:

  Press the Win key on your keyboard.

  1. Type Ncpa.cpl (this will take you to the network connections)
  2. Select your wireless connection
  3. You will see a screen on the botton, you will see a button called properties, near the left button
  4. On the Properties menu go to IpV4 (if you don't see scroll down) double-click to open
  5. In this screen, you will see (get IP address automatically) slot that you wil see the Obtain DNS server address automatically select this option
  6. Type 8.8.8.8 and 8.8.4.4 airfield

  I will also choose a static IP address, and this can be done here as well.

• My HP shows it is connected to the new router, but does not connect to the internet. How should I do?

  I have a HP G60 Notebook PC with Windows Vista Home Premium, it is about 4 years old. I recently got a new Cisco Linksys E1500 wireless router, which is connected to my home computer. My laptop shows that it is connected to the home network, but it does not connect to the internet. Other laptops in the House are able to connect to the network and to the internet. Mine seems to be the only one not working do not. Why it is not working? What should I do about it?

  I ran the network diagnostics. It is said "a problem with you network router or modem broadband could prevent an internet connection." I have disconnected these two and tried again. It did not work! I have also connected my laptop directly on the modem and it does not always connect to the internet. I tried to reset the network card. My IP settings are set to automatic.

  My internet connection was not a problem before last week (when I got a new router). What is the problem with my computer? Help, please!

  Hello:

  If you have an Atheros wireless adapter in your PC and you have not updated the driver, I recommend that you install it.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-99392-1&mode=3

  Wireless adapters Atheros with former pilots, dislikes the new Linksys routers.

  If you have an Atheros wireless card, and your wireless driver is more than 2 years, I am very confident that this will solve your connection problem.

  Paul

• Headset Bluetooth paired, but does not connect.

  I recently bought a pair of headphones Bluetooth (BT) to replace the ones I currently have. In any case, I have them connected to my phone, but now I want to use it on my laptop. It does not connect to it. He was just trying to connect to my phone. I even turned off bt on my phone, but the headphones does not connect to my laptop. I tried to go to the playback etc... devices and clicking on the 'connect' option, but it does nothing. Everything seems to work fine, except that! Help, please.

  Hi Tom,

  Please contact Microsoft Community. I understand that you have a problem with the Bluetooth Headset connection. I appreciate your efforts to solve this problem, I'll probably help you solve this problem.

  To better understand the issue, let me know if you face any problem when connecting the Bluetooth headphones on another computer in Windows 7?

  This problem might have occurred because of these reasons:
  1. wrong settings.
  2 damaged material.

  Try the steps listed here and see if it helps:

  Method 1:
  I suggest you to run the corner hardware store to ensure that basic material settings are set correctly.

  Open the hardware and devices Troubleshooter http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  I suggest to return the item and make sure that the Bluetooth settings are set correctly.

  Add a Bluetooth device to your compatible computer device http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  See these articles for more information:

  Change settings for a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows/change-Bluetooth-device-settings#1TC=Windows-7

  Add a Bluetooth device or other wireless or network device: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

• application of wireless network equipment, does not connect to internet

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with - does not connect to the internet, programs
  • Network hardware wireless of demand of error messages
  • Recent changes made to your computer - reinstalled windows
  • What you have already tried to solve the problem

  Hi Kavibala,

  Before you help out us, we need of more information about the issue.

  • Who is the manufacturer of the computer?
  • What is the brand and model of the computer number?
  • Have you installed the correct drivers for the wireless card?
  • You use wireless to connect to Internet or is it connected via Ethernet?
  • What is you receive the exact error message?

  However, you can access the links below and follow the steps to solve the Internet connectivity problem. http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Also, make sure that you have installed the correct drivers from the Web site of the manufacturer of the network on the computer device.

  I hope this helps. Post back with the required information.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Devices bluetooth audio seen paired, but does not connect unless that selected

  iPhone running 9.3.3

  Question is that devices audio bluetooth paired when turned on bluetooth settings will appear on the page, but they do not send audio to them automatically. They are listed under "My devices" but show "not connected". I can select the device in the menu settings and plays sounds as soon as I touch the name of the speaker, but not until I do. Same problem in the car too. Appears on the right, but shows not connected until I have the touch.

  I didn't open the bluetooth settings to on any prior iPhone iOS just selected a camera already attached before. I deleted and repaired, switched bluetooth, reboot the phone, soft reset the phone and even a network reset.

  Thank you.

  Try control centre. Swipe up from the Home button

  

  This screenshot of my iPad, it's the same on iPhone

• HP Mini 2102, wireless detects networks but does not connect

  Hi, I have recently reinstalled Windows 7 on my HP Mini 2102, downloaded this driver
  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & prodTypeId = 32...
  
  I tried to reinstall, but it still does not work.

  Finally solved the problem, I ran CNettoyez and deleted the registry who have not been used, worked like a charm and now I can connect wirelessly.

• Computer can see wireless but does not connect

  I have a new HP EliteBook Folio 1040 G1 running under Windows 7 64-bit. The computer can see the wireless network, but when I try to connect to them I get a pop up saying "Wireless: assocaiting" followed by a saying "Wireless: disconnected" and the connection never works. In this case connect to any wireless network. I know that networks and passwords are correct, because my phone and iPad can connect to them without problems.

  I've updated all the drivers via Windows Update and also the SP support Assistant. I tried to uninstall the wireless driver and allowing windows to discover and install from scratch. Nothing seems to work. I see a similar thread a few years ago in the forums but no resolution. I never got so so boredom before wireless connection and I can't help but suspect a hardware failure.

  Can anyone suggest anything?

  Thank you

  Phil

  OK, I realize, but this cannot help others, after raising a warranty with HP call, it turned out that my problem was hardware after all. HP sent a technician to replace the network card, but when he opened the laptop, it turned out that the antenna is detached from the card wireless altogether and reataching it solved the problem.

  Like I said, probably not much help to anyone because it was a specific question, but I thought I would post the result anyway.

• iPhone connects to the wifi but does not connect to internet

  I have an iPhone running iOS 9.3.2 6s (last updated).

  The phone connects to the wifi network, but even if it's to show the signal strength is good, the phone does not charge any internet content (weather, FaceBook, email, etc.).  If I disconnect WiFi and use the data, it works very well.  We have no problem connecting to the computer or a smart TV network wifi and internet connection.

  This also happens with my daughter 5s iPhone and iPad for my son.

  Sometimes it will work fine on wifi, then a little while later I can't get anything to load. And it can be like right now when I'm at home alone is not as if there's a big load on our wifi.

  We have high-speed internet by cable (25 MB/s download speed) and a router Lynksys EA3500.  Encryption is set to WPA (not WEP).

  I tried to go into my phone settings and reset the network.  Always problems.

  It's really frustrating because you eventually switch to our mobile data and use it instead of our data ' wifi '.  And then to go on our data on our phone plan

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

  Council: https://discussions.apple.com/docs/DOC-9892

• Satelitte L50-B-1DZ: BT is paired but does not connect to the android device

  I just bought a new toshiba brand laptop with win 8.1
  Satelitte L50-B-1DZ I got bluetooth on
  And have even added and paired 3 devices to this Sucsesfully.
  Tab after assend 300Y android android phone and a samsun Music Center.

  The bluetooth connects very well with the Music Center.
  But not with the phone android or tab
  It will not just connect, I checked the phone and the tab are visible etc.

  I hear a lot of rumors of 8.1 problems
  With drivers who have improved 8 etc.
  I managed to do a check of device driver
  Manager and he said the best up to date
  Are installed.

  But I want to be playing so deep in this
  Bought a brand new laptop with windows 8.1
  Is it worth to take back to pc world a tell / show them
  The pronlem for them to market.
  Because they will be more IT his life than me.
  Does anyone else have this problem?
  Is it something android?
  I am due a new phone soon I could poss
  Get a windows a next if this will connect?

  Thanks nikki

  Hello

  Check it please my thread on the BT feature. I tested it with my phone android mobile.

  Please test the functionality of BT send some files in both sense, even if the mobile phone is crystallized in Win as not connected.