ActiveSync does not-how use bluetooth Windows driver?

Similar Questions

• Why my Epson Workforce 630 does not print using my Windows 7 computer?

  I have a printer Epson Workforce 630. All cartridges are new, just replaced. The ink levels are normal on the printer and it prints documents audit nozzle locally and my small laptop running Windows 7. It is also used to print from my desktop Alienware x 51 running Windows 7. My computer is connected to Ethernet and the WiFi printer to print. This is not him point because I've had the same setup for over a year now, and that worked before. The printer is recognized on my computer. I can ping on command prompt, sign in to Chrome and it is listed as being active in my list of devices and printers. I can't print in WiFi or USB. When I try to print wirelessly, it merely display the normal print screen, no errors. Then after a few minutes, I check the print queue, and there is an error - printing... from the state table. When I connect via USB, it gives me an error of communication. Here is a good list of things I checked:

  • I checked the control panel of Verizon. The printer is active and online.
  • The printer WiFi light is green.
  • The printer has ink Epson and can print locally.
  • The printer can print from another wireless laptop and a USB connection (running Windows 7, same as my Alienware x 51).
  • The printer used to print on my current configuration of the office.
  • The printer returns the packages when ping via the command prompt.
  • The printer can be connected to the use of the local address that is located on the control panel of Verizon via a web browser.
  • The printer has a large green checkmark beside him in devices and printers and is listed as being active.

  Here is a good list of things that I tried to solve the problem:
  • Uninstall and reinstall the latest drivers for the printer (several times).
  • Connect via USB and have Windows 7 trying to print via USB. Communication error.
  • Turn off the printer and turn it back on.

  Here is a list of the things I'm doing which could have caused the problem:
  • I joke with the rules in the port forwarding Verizon Control Panel. I deleted a bunch, a few months ago. However, other printers can print, so I don't know.
  • I fiddle around with regedit, and I defrag my registry of every day. Could it have caused the problem?
  • I have a lot of process stop and disable services that I have no idea about.
  • I delete the files I'm not familiar with.

  Any ideas?
  Thank you!

  Hi carbon,

  As he did not work in the administrator account, we need to repair the operating system files.

  You can perform in-Place Upgrade (repair install) and check.
  The detailed procedure is suggested in the following link.

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099

  Warning: Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

  I hope this helps!

• iPod touch will not connect using bluetooth

  New iPod Touch model MKJ02LL/A does not connect using Bluetooth

  Try to connect again redfish Bluetooth music receiver model RF-BTR315

  and

  Radio in Toyota Camry

  Sometimes (after restarting the iPod of parts and the music receiver) the music receiver will appear but then not pair.

  It never connects to the Camry.

  Redfish and Toyota says that they are compatible with your iPod model and its iOS?

  Ry, you can:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset the car system and the device of redfish

  . - Reset network settings: settings > general > reset > reset network settings

  -Restore from backup. See:

  iOS: how to save

  Restore your device from an iCloud or iTunes backup - Apple Support

  -Restore factory settings/new iOS device.

• computer does not recognize my external hard drive, how to fix

  my computer does not recognize my external hard drive and need to know how to fix it. I need to access files on the hard drive. AS SOON AS POSSIBLE

  Hello

  I suggest you to follow these steps and check if that helps.

  Method 1:
  Step 1:

  Go to Device Manager and check if the hard drive is it recognized.

  Step 2:
  Go check and management disk if the hard drive is recognized, if so, then try changing the drive letter and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-add-or-remove-a-drive-letter

  Method 2:
  Try to run this under fixit and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Also check out this link:
  http://support.Microsoft.com/kb/948911

  It will be useful.

• Windows 7 does not suddenly recognize DVGW & CDROM drives...

  I have been using Windows 7 for a few months now, and no problems with my dvd writer Windows 7 / CDrom drive.  Both works fine up until yesterday.  When I check the drivers supplied by Device Manager they both now an exclaimation mark yellow as if Windows 7 does not recognize these devices.  I have a Samsung TSST corp CD/DVGW-SH-S182D, which is on the list of compatibility for Win7.  I have tried to download the driver from the manufactor, but still does not solve my problem.

  I wonder if everyone suddenly ran into this problem and you may have a fix.  I know that the pilots, both work with Windows 7 and I know the DVD burner because I used it before that Windows suddenly stopped to recognize the camera... Please help works, thx.

  Hello

  Have you tried restoring the system to a point before that happened?

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  ==================================================

  If the above didn't help (or if the problem comes back).

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows 7 RC1 does not recognize my secondary hard drive

  I installed windows 7 RC1 on my system (2 GB of ram, processor E7200, ASUS P5QL-E). I started with 2 x 250 GB hard drives and purchased a 1 TB drive that was on sale. At first, I installed it with all three additional readers, the 1 on the 250 GB drives. All my disks were very well known at this point, but I realized that I have installed windows 7 hard disk that was dying, so I made another clean install. Now the two discs (the second disk of 250 GB and the 1 TB drive) are recognized by my BIOS, but disk management does not see my 1 TB drive. Someone has an idea what here?

  To which I would recommend checking the physical and other connections, maybe turn the system off and remove the disk and all reinstall.  If you have another operating system installed yet, you can also check here and make sure it is fully visible and operational in this still from the BONE.

  Even if Windows decides for some reason he cannot use a piece of hardware, it should be always displayed in Device Manager.  Something very early in the process goes wrong if it does not show here.

• Windows 7 64 bit does not recognize the external hard drive.

  Windows 7 64 bit does not recognize the external hard drive.  I have an old 250 GB Western Digital external hard drive.  Neither of my windows 7 machines recognize it.  It does not show in the device, Manager of the computer Manager or Explorer.  Any help would be appreciated.  THX Mike

  Hello

  Initially, check if the hard drive is compatible with Windows 7.
  Check out the link - http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx
  See the help article and check if it helps.
  
  My drive does not appear in Windows Explorer
  http://support.Microsoft.com/kb/330140
   
  Tips for solving problems with USB devices (this also applies to windows 7)
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
   
  It will be useful.

• When I try to install adobe photoshop 13 on my computer it comes up with the error message error code "this installer does not setup on a windows 64-bit operating system support" 6. How to I recify this? TIA

  When I try to install adobe photoshop 13 on my computer it comes up with the error message error code "this installer does not setup on a windows 64-bit operating system support" 6. How to I recify this? TIA

  You can try to download the 64-bit version.  You can download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

• How can I set up Vista so that the PC does not switch to another window (for example the Spy Sweeper alerts) while I am playing a game?

  How can I set up Vista so that the PC does not switch to another window (for example the Spy Sweeper alerts) while I am playing a game?

  Vista is not in control of this technique. Spy Sweeper needs to have an option to control that. If this isn't the case, then it is badly programmed. Flight of focus (go to another window) when it is actually needed is a big no-no for the design. I find this option, if I were you :)

• Windows Vista does not recognize my external hard drive, Eagle Consus AND-CS2PSU2-BK

  I have an HP Presario laptop running Windows Vista and it does not recognize my external hard drive, or my flash drives.

  I have an external hard drive Eagle Consus AND-CS2PSU2-BK.  It worked fine on my desktop, which works on XP.  I plug it to my computer laptop and nothing.

  When I plugged it in the first place, he says that he needed to download the drivers.  I clicked 'ok' to automatically download drivers and a few seconds later, he said that it successfully completed the driver download/install.

  I look under the drives in my computer and he's not here.

  I went to start, right click computer, left you click on Manage and double-clique then under storage disk management.  All I see are C drive and recovery disc (D).  No other drives displayed.

  I exitted who and set up the Control Panel, double click on Device Manager.  He said in the other topic peripheral USB to ATA/ATAPI bridge.  I don't know whether or not it is my external hard drive.  It indicates the Type of device: Other Devices and under device status it says: "the drivers for this device are not installed. (Code 28).  This operation requires an interactive window station.  To reinstall the drivers for this device, click on reinstall the driver. »

  He asks if I want to reinstall the drivers, so I clicked that.  He couldn't find them / install them.

  Still, I don't know if USB to ATA/ATAPI bridge is still linked to my external hard drive.

  Help, please.  The same thing happens when I try to plug a flash/USB.

  Try this:

  In the right click 'USB to ATA/ATAPI bridge' Device Manager under the other devices section, click unsintall or press the delete key. Reset with the connected hard drive it must be reinstalled, but under the USB controllers. Make sure the device works on the other computer cable can also go to bad.b

• Windows 7 does not recognize my CD/DVD drive...

  I have a Compaq laptop with an Optiarc DVD RW AD - 7561A ATA drive, but it does not work after installing Windows 7. I tried to find a driver for it but no luck. It worked fine before with Vista before installing the new... Any help would be appreciated. Take care..

  It's the old problem of filters upper and lower...

  Read here for the fix  The work expected auto fix, the manual fix will certainly never address a computer say or even think "I'll just do this quickly.
  My trips on Format and Reload or Windrivers

• Windows does not detect my cd-rom drive in 7 edition, can't Reinstall driver, help.

  Windows does not detect my cd-rom drive in 7 edition, can't Reinstall driver, help.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Fix for CD/DVD drive missing:

  http://support.Microsoft.com/kb/982116

• I recently purchased Photoshop elements 13.  My employer just changed my computer (I am allowed and only use my personal computer) and the new computer does not have a CD-ROM drive.  Is it possible to download the software elements on my compu

  I recently purchased Photoshop elements 13.  My employer just changed my computer (I am allowed and only use my personal computer) and the new computer does not have a CD-ROM drive.  Is there a way to download the software items on my computer with the serial number and not the CD? Help!

  You can download the trial and use your serial number of the drive to enable to make full use...

  PSE 13 trial - http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements

• This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.

  Jake

  Hey Jake,

  Follow these methods.

  Method 1: Follow these steps:

  (a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.

  (b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.

  (c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:

  Remove or reconfigure newly installed unit.

  Restore a version prior to updating the driver.

  Use system restore to undo the Device Manager recent related changes.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  (d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Update the latest graphic drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• My bluetooth does not recognize my bluetooth phone?

  For some reason, my computer does not recognize my bluetooth phone. How can I fix this problem and how can I be sure that my bluetooth works on this computer?

  Everything and allllllll help appreciated...

  Rick

  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  How to setup a Bluetooth connection.

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Set up a Bluetooth compatible device

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-passkeys-for-Bluetooth-enabled-devices

  Using authentication keys compatible Bluetooth devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  The problems with Bluetooth devices

  Read the above and, if necessary, contact the manufacturer of the phone.

  See you soon.

  Mick Murphy - Microsoft partner