ActiveX and COM-registry error details

ActiveX and COM-registry error details

32 bit - Backupshell 1.0 Type Library
The 1.0\HELPDIR for this typelibrary subkey contains no data.

64 bit - Backupshell 1.0 Type Library
The 1.0\HELPDIR for this typelibrary subkey contains no data.

32-bit - IBackupLocationsShellFolderImpl
This interface points to the type library missing {00020424-0000-0000-C000-000000000046}.

34 bit - SymDgnHC
This object points to the type mising {ABEB124A-7647-4B25-BF95-E06F00245769} klibrary.

Our Modem dies on us and we waited for another expedition, we tried to play old games from our old computer that had windows 98. We have now XP and a new computer. But the games would not play because they seemed not compatiable with this new system. Ever since then with the new modem, which is the same as the last who dies, the computer runs VERY slowly and is worse than dial-up, we have DSL. I have Norton 360 and Regisrty Revivier. They seem to help, but after a few minutes to an hour, the system slowes horribly. Please help me! I deleted this remotley near the old games too.

Get rid of the registry reviver (make sure that registry cleaner you are using, some may make things worse) and Norton. What you wanted first of all, have you not uninstall? Do not remove the folder. You will have more probs

Tags: Windows

Similar Questions

  • Microsoft has a software that cleans, repairs and fix registry errors for free?

    Clean and fix free registry errors

    Microsoft has a software that cleans, repairs and fix registry errors for free

    On Tuesday, January 18, 2011 20:38:14 + 0000, Tinaya says:

    Microsoft has a software that cleans, repairs and fix registry errors for free

    N ° and stay away from all these programs.

    Registry cleaning programs are all snake oil. Cleaning of the
    registration is not necessary and is dangerous. Let alone register and
    do not use any registry cleaner. Despite what many people think, and
    What software record cleaning suppliers are trying to convince you,
    have unused registry entries is not really make you hurt.
    The risk of a serious problem caused by a registry cleaner by mistake
    delete an entry you need is much greater than any potential benefit
    It can have.
    Read http://www.edbott.com/weblog/archives/000643.html

    and http://aumha.net/viewtopic.php?t=28099

    and also
    http://blogs.technet.com/markrussinovich/Archive/2005/10/02/registry-junk-a-Windows-fact-of-life.aspx

    Let me stress that neither me nor anyone else who warns the
    use of registry cleaners never said that they always cause
    problems. If they have always caused problems, they would disappear from
    the market almost immediately. Many people have used a registry
    cleaner and never had a problem with it.

    The problem with a registry cleaner is that it carries with it
    the risk of a significant problem. And since there is no
    benefits of using a registry cleaner, running that risk is a very bad
    good deal.

    Ken Blake (MS-MVP)

  • How do I detect and fix registry errors?

    How can I find out, detect errors and repair the registry?

    Hello

    You can solve the problems caused by an error by using different methods. Most of the errors are not just the registry
    errors. Do not buy into the use of cleaners registry or system optimizers who are too hype and wil difficulty little
    causing a lot of problems. Look at programs such as snake oil.

    If you have a system error come here and in detail the issue and we can usually help you solve. Specific
    Errors may require a particular corrective measure. Here are a lot of General methods to help you determine
    or correct problems. In the next message will be a complete enough for general performance troubelshooter
    help if needed (of course, it includes many below).

    ------------------------------------------------------------------------------------

    Some general methods to correct a lot of problems in the system include:

    System restore - use so you can go back to before a problem occurred - with the exception of malicious software which most often
    It must be removed before using the system restore, which could help to spread the infection.

    How to create a System Restore Point in Windows 7
    http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    --------------

    To correct the many problems caused by the start-up of programmes, services and drivers.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or
    Windows 7
    http://support.Microsoft.com/kb/929135

    How to change, add or remove startup programs in Windows 7
    http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

    Autoruns - free - see what programs are configured so that it starts automatically when your
    system boots and you log in. Autoruns is also the full list of registry and files
    locations where applications can configure start automatic settings.
    http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx-

    Try these to erase corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    --------------

    A repair Installation allows to keep the programs and data, even if redundant backups are
    always a good idea.

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    ---------------

    Other useful methods include the Startup Repair (the best of the repair disk or a Windows Setup.

    Startup Repair often works from a Windows 7 repair disc or a disc of Windows 7 Installation
    When he does not value or a recovery disc. If so how do a Windows 7
    ERD is lower. An ERD can be done on any computer with a CD burner running
    XP, Vista or Windows 7 because it uses no files from the host computer.

    You can try some of them in Mode safe - tap F8 repeatedly that you start.

    If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
    protected. The manufacturer of your system will also sell the physical DVD cheap since you already
    Clean Windows. You can also do an ERD on another computer.

    Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
    return and then try to startup repair.)

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    What are the system recovery options in Windows 7?
    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    Try the disk Options recovery or Windows 7 startup repair.

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    Also from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    Then run checkdisk (chkdsk).

    How to run check disk in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    Retry After Chkdsk startup repair.

    If after those you can try the system restore to fashion without failure or the valuation or Windows 7
    disc.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    --------------------------------------------------------------------

    If you need to repair disks - these help repair Windows not re-install.
    Often an ERD will help you when the recovery disk is not - use OPTION 2 to
    make the disc.

    How to create a Windows 7 system repair disc - use OPTION 2 to
    make the disc.

    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    ======================================

    If necessary:

    What to do if Windows does not start correctly
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    What are the system recovery options in Windows 7?
    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Get performance and slow registry errors in Windows XP

    The artist slow system, application crashes, etc.

    * Original title - any information you can give me about the Windows XP registry errors? *

    Hello

    1. what questions do you have with the registry?
    2. meet you experience slow performance, the application crashes with Internet Explorer or use all the applications installed on Windows XP?
     
    Follow the steps mentioned below and check if that helps:

    Step 1: Check in SafeMode with network.
    Follow the link below to find out how to start your computer in safe mode with network.
    To start the computer in safe mode
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

    Step 2:
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353

    Note: Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    a. click Start, click Run, type msconfig.exe Search box and press ENTER.

    If you are prompted for an administrator password or for confirmation, type your password, or click continue.

    b. on the general tab, click the Normal startup option and then click OK.

    c. When you are prompted to restart the computer, click restart.

  • find and fix registry errors

    Windows live onecare Cleanup finds an error in registry but how correct or delete?

     

    --
    db·´¯`·...¸><)))º>

    .

    "azdesertdweller" wrote in message news: e7a83ae5-49b6-475f-95b6-15c4b620ede9...

    Windows live onecare Cleanup finds an error in registry but how correct or delete?

    DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann

  • A security update for windows vista (KB2665364) cumulative hotfix for Kiibits (KB2647518) Activex and update Windows vista ((KB2679255) I get the error codes 800736B 3 and B 8007371)

    A security update for windows vista (KB2665364) cumulative hotfix for Kiibits (KB2647518) Activex and update Windows vista ((KB2679255) I get the error codes 800736B 3 and B 8007371)  I can't find answers and I'm not tech saavy.  Every day for a month updates failed to install

    Hello

    I would suggest trying the following methods and check if it helps.

    Method 1:

    In the following article from Microsoft Fixit to reset Windows Update components and check if the problem persists, run the fixit.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

    Method 2:

    Put the computer in a clean boot state, and then try to install the updates and check if it works.

    How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:

    http://support.Microsoft.com/kb/929135

    Note: once you have completed troubleshooting, try the procedure described in step 7 to reset the computer to start as usual.

    Method 3:

    Try to download updates from the Microsoft Downloads Web site and check.

    http://www.Microsoft.com/download/en/default.aspx

    Hope the information is useful.

  • Computer has been great, but now running slow, hot and almost 50% registry errors. What is going on?

    Computer will have 2 years in April.  Had no problems until last week when it crashed.   Could not get going by the restoration of the State of origin.  Now runs very slowly and has very high CPU usage.  Internet often stops.   Fan runs all the time, I think (tried air compressed for the first time and has not solve).  Discovered that I have registry errors almost 50%.  I tried CCleaner for free and did not help.  Any suggestions?

    Hello

    ·         Since when are you facing this problem?

    ·         Using internet connection wired or wireless?

    ·         What operating system is installed on your computer?

    I suggest you follow the steps mentioned below:

    Method 1:

    Install the latest drivers and check if the problem persists.

    Method 2:

    Run the troubleshooter for Internet connections and check if the problem persists:

    a. click the Start button, type "Troubleshooting" (without the quotes) in the Search box and then click Troubleshooting.

    b. click network and Internetand then click Internet Connections.

    Method 3:

    If the previous step fails, restart the computer in safe mode and check if the problem persists. Follow the steps in the link:

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    You can also follow the steps in the link:

    http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  • Began is registry and Windows XP error message not be loading not: trying to reinstall XP but error Reg stops the process

    I have a home built computer works very well with Windows XP for about two years, but has recently started having a blue error screen registry which stops at Windows XP to load.

    In part, the following text is displayed:
    Registry error
    Technical information:
    STOP: 0 X 00000051 (0X00000001, 0XE112E8C8, 0X005D4000)

    I can get to the BIOS screen and things are defined as usual as I can tell.  I can get it to the advanced screen by pressing F8 but no matter what I click on, such that start in "Safe Mode" or "last known good configuration" always ends up to the blue screen with registry error.

    I have the Windows XP disc and can pass it through all the preloading stuff, but when you get to the screen to choose the repair or start the new installation, no matter what I choose, it always comes back to the blue screen and error in registry.  Is there a way to correct the registry error so I can get Windows XP to load - from the disc or other?  If the registry error cannot be corrected, wiping my drive hard clean help?  If so, how do I?

    Grasping at straws, on the off-chance that your video driver is at fault here, on the Hirens boot disk, you can go to
    Programs-> Editors / viewers-> Notepad ++
    to start a text editor.  Once opened, go to file-> open and open the "Boot.ini" file located in the root directory of your boot drive.  "Find the line under" [Operating Systems] and add the switches "/ basevideo/SOS" (without the quotes) at the end of the line.  Save the file (file-> save) and try restarting your machine.  These switches should force your machine to boot standard 640 x 480 VGA video independent of any driver you have loaded.  If your computer starts, you need to reinstall the video driver for what video card you have (visit the website of your computer manufacturer).  If you do this, then you will need to re - edit the file in the way he had, it will start normally.

    More information about the Boot.ini file is here:
    "Switch options available for Windows XP and Windows Server 2003 Boot.ini files"
      <>http://support.Microsoft.com/kb/833721 >

    If all goes well, if nothing else, the /SOS switch displays driver that has been modified to load before the crash.

    My only suggestion is to use Hirens to back up your data before reinstalling Windows.

    HTH,
    JW

  • Roxio Creator 2012 has stopped working and comes up with an error in the Visual C++ Runtime library.

    Original title: what is the number of the download version 03/03/2011 for Visual C++ 2010SP1 x 64 Redistributable?  It is newer than the 10.0.30319(x64)?

    Roxio Creator 2012 stopped running and comes up with an error in the Visual C++ Runtime library.

    Hello

    1. What is the exact full error message?

    2 is specific to the program the issue?

    3. you remember changes to the computer before the show?

     
    When was the update of Visual C++ 2010 installed and you can check the version in which it is most recent according to the installed update.
     
    Method 1:
    Install the latest version of Microsoft Visual C++ (x 64-bit) available at the following link.
     
    Method 2:
    If the problem is specific to the program perform repair installation of Roxio for the following steps.
     
    (i) by clicking on the Start button, click Control Panel, clicking programs, and then clicking programs and features, open programs and features.
     
    (II) select the program Roxio and then to change or repair a program, click on change or repair.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
     
     
    In addition, if the problem persists after the question in the following link
  • During startup, I get an error message that the registry database cannot find a file and modify registry to delete the reference to the file in the registry. How can I do this?

    Original title: Registery Error Message

    During startup, I get an error message that the registry database cannot find a file and modify registry to delete the reference to the file in the registry.  How can I do this?

    Hello

    • What were the changes made before the problem occurred?

    I recommend you perform the clean boot.
     
    Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
     
    See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
     
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135 
     
    Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  • I reinstalled windows vista to factory default and during the analysis of the registry errors found 1395 errors

    I reinstalled windows vista to factory default and when parsing registry errors with norton utilities found errors in 1395. what I would do. I have to fix all the mistakes.

    Hi mohdrafi,.

    No need to panic. If you used another registry, cleaner, we could see 2000, 3000 or 4000 even depedning errors that the registry search cleaner. Registry cleaners are so reliable that I wouldn't even recommend them. In fact you don't need a registry cleaner and, contrary to popular reports, your registry "is not" increased cleaning performance. Registry cleaners are noted for the provision of many "false positives" it makes you wonder if the registry cleaner is saying 'what the devil I know, just delete this and the other and hope everything works eventually. My advice? Forget the registry cleaning!

    John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ; Web: http://www.silversurfer-guide.com

  • Impossible to install Lotus SmartSuite 9.8.2, access to system registry error and should then stop error.

    Original title: loading lotus smartsuite in windows 7

    Loading lotus smartsuite 9.8.2 in windows 7 I get the error message ' access to system registry error and should then quiting error. "

    Hello

    The problem is specific to the application?

    If the problem is specific to Lotus SmartSuite 9.8.2 I'd contact the IBM Lotus SmartSuite support for assistance. Consult the following link:

    http://www-947.IBM.com/support/entry/portal/overview/software/Lotus/Lotus_SmartSuite

  • Satellite Pro M10 will not start again and comes up with the error message

    My laptop Toshiba Satellite Pro M10 will not start again and comes up with the error message "load error" when I press the power button.
    The arised problem after installation of the 'symantec system works' and try to restart windows XP Professional to make the installed executable program.

    What can I do to get the notbook again reboot?

    Hello

    Seems that there are problems with the files of GoBack.

    Try to boot in safe mode and remove the Norton System works from your laptop ;)
    If this does not help, you will need to recover the laptop with the recovery CD Toshiba delivered!

    Also I recommend to visit the Symantec support site and to check the solutions to the problem with the Norton System Works programs

    Good luck

  • What are the registry errors and are they more than a gadget?

    I hava a 2 year, HP laptop, XP Professional.  I get the e-mail promising fix registry errors and make my computer faster and more efficiant - it seems a bit "drasggy", these products work? Is there a free source for the same thing?  Thank you very much.

    Registry cleaners fix errors without importance offering significant benefits and this can create unsolvable system, errors that cannot be solved by reinstalling Windows and all that cause.

  • When you try to download sp3 for office 2007 I get 22% done then it freezes and comes up with the error 8007ee2. I tried all of the fixes recommended without result, ideas?

    When you try to download sp3 for office 2007 I get 22% done then it freezes and comes up with the error 8007ee2. I tried all of the fixes recommended without result, ideas? I am running Vista and office 2007. I tried all the Windows solutions but nothing works

    Hello Stephen,

    You happen to have another system that you can try to download the fixit on and then moving on a USB? You can also try this fixit as well: http://support.microsoft.com/kb/971058

Maybe you are looking for