adapter 6to 4 does not work. fix wiill works on vista

adapter 6to 4 is not working help me to solve the problem.



In all likelihood, you don't have to fix it.

Read this information about 6 and 4 adapters:

See you soon.

Tags: Windows

Similar Questions

  • Satellite A300D-158 illumination button does not work on Vista

    Buttons light Toshiba does not work under Vista.

    I installed added package versions available in Toshiba support page, but Toshiba Assist do not see the list of function buttons where I can change the feature keys.

    When this value added package is uninstalled all buttons works with WMP, but during the installation - do not.
    Illumination power button is not working do not by the press.

    This means support to toshiba button does not work properly with vista.

    I don't have these problems with XP


    As far as I know, you can enable and disable the lighting in the BIOS.
    Go to BIOS and check if you can activate it.

    By the way; you said that buttons don t work with Vista.
    Have you tested this with Vista OS preinstalled Toshiba?

    You should do this!

  • Zoo Tycoon 2 does not work on Vista 64 bit Ultimate

    When I start the game it gives an error saying that I have 0 MB of RAM installed.
    I also have a stub GPF.

    I tried to turn on DEP for all programs and added ZT.exe in exceptional cases.
    I edit "MSCONFIG" to show only 2 GB of ram.

    The issue of ram 0 MB goes, but I still I get a stub of protection error when I start the game.

    The thing is my old Zoo Tycoon 1 full collection works very well.
    ZT1 was released around 2001-2002. Whereas ZT2 came out around 2006.
    How can and more old-fashioned work fine but not the new version. I expect it to be the other way around.

    Someone at the helpdesk said MS the ZT2 game does not work on Vista 64 bit and I should install a virtual machine so that it can work in 32-bit.
    Is really the only way? Help, please.

    Hi orbit17,
    Thanks for posting on Microsoft Answers.
    Try to turn on DEP for "Windows programs and services only" and then restart the computer and check with the game.

    Here is a link to a KB which deals with the minimum requirements of the system and the compatibility problems with Zoo Tycoon 2:

    Please make sure that your computer meets the requirements for the game and that your computer is compatible

    Also how much RAM do you have installed on the computer?
    Did you add extra RAM since the purchase of the computer?

    You can also try to run the memory diagnostic tool by using the Windows Vista DVD.

    I hope this helps.
    Kind regards

    Niranjan | Microsoft Answers Support Engineer

  • My microphone does not work on vista?

    My microphone does not work on vista? WATS the problem

    Hi AhsanShah,

    1. What is the brand and model of your microphone?

    2. what happens when you try to use the microphone?

    3. you receive messages or error codes?

    4. were you able to use the microphone before without any problem?

    5. you will remember to make changes to the computer before this problem?

    6. are you facing problems with other audio devices?

    You can check out the following link and check:

    Connect one microphone, music player or other audio device to your computer

    Hope this information is useful.

  • Windows Easy Transfer 7 does not work on Vista

    Try to migrate date files and the configuration of Vista Home Premium (32 bit) to Windows 7 Home Premium (64 bit), Windows 7 laptop says to use a new version of Easy Transfer, tried to install that but it does not work. Starts then just seems to close, without indication of the error.

    Hi boris99,

    You can see the following thread, which presents a similar problem discussed.

    Windows 7 easy transfer does not work on Vista Home Premium 32

  • Built an MSI that does not work under Vista but works under XP

    We have built a MSI file that does not work under Vista but works under XP. No errors occur in the installation.  Running the installation "as Administrator".  But the application does not start without errors.

    You'd better choose to post your question in the developer forum. You can try the MSDN forums below, but you should definitely provide more details when you do.

    MSDN forums - MS - MVP - Elephant Boy computers - don't panic!

  • MediaTek MT7630E 802.11bgn adapter Wi - Fi does not work in 802.11n mode (mode-N), only G-mode

    A few days ago, I got a new notebook HP ProBook 430 G1. OS: Windows 8.1

    They have Mediatek MT7630E 802.11bgn Wi - Fi adapter inside.

    Problem: I found this wireless adapter does not work in 802.11n mode (mode-N), but works well as in G-mode.

    Some modifications in the parameters of the driver on the Advanced tab are problem solved.

    I think it's a bug of material, or (less maybe) a bug in the driver.

    In other forums, I heard that HP can replace the card wireless, which works well. Is it not?

    You misunderstood me. I meant, of course, all channels from 1 to 13.

    I solved the problem by unistalling completely all the WiFi and software of the device with its drivers from Control Panel.

    Then downloaded latest drivers from site oficial Mediatek.

    In the Advanced tab of the new driver settings option appeared - "802.11n direct mode.

    After you enable this mode WiFi started working in mode N well.

  • Impossible to find wireless adapter/driver installation does not work

    I recently had to open my laptop HP G7 to blow off the dust of my fan and under the keyboard. When I put they keyboard back together, my wifi does not work. I am now on an ethernet connection. Open a network connection, there is no icon wifi adapter. I tried to install the driver, but mid install, I get this message "the driver that you want to delete the files will not be deleted as the corresponding card is not installed". I don't know what that means, but when installation is finished, the Wi - Fi connection does not always appear in network connections, and the driver does not appear in Device Manager. What else can I try?

    Hi @king26 ,

    Welcome to the HP Forums!

    I would like to take a moment and thank you for using the forum, it's a great place to find answers. You have the best experience in the HP forum, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I think that after you open your laptop to clean dust from your fan and that breaks down your wireless card is no longer recognized.

    I suggest deleting and reinstalling the wireless card, as it can move during the cleaning process.

    The driver could not complete the installation because he couldn't find the map to focus on.

    Please let me know the results.

  • Keyboard does not work under Vista on Satellite L300D

    Dear readers,

    I have a Satelite L300D with Windows Vista 32 bit Home Premium. It is about 5 months and so far I have not had problems.

    Today, I started the book and noticed that I was not able to type my password for Windows.
    I thought, there must be a problem with the keyboard and restarted the laptop.
    I tried to enter the Bios and I wonderd, keyboard worked as expected it. Back to Vista, the keyboard does not work yet.

    I rebooted again and activated Capslock befor the Windowsstartup and looked at the LED.
    Just after the appearance of the Windowslogo, Capslock off a keyboard was dead.
    So I thougt it must be a driver error. I deleted the two driver files Hardware-Director told me where the drivers keyboard, rebooted twice a keyboard had returned to work, but only until the next reboot.

    So I decided to make the recovery of HARD drive and reinstall Windows, thinking, this should fix the problem.

    But it's still there.

    Is there someone who could help me? If this is an error of the driver, is should have disappeared when the laptop is in a State of delivery, right?

    I would be very happy for any advice or help

    Greetings from Berlin


    PS: I want to say sorry for my bad English... :-)

    Hey mate

    > It's about 5 months and until now I didn't have problems.

    I wonder why this keyboard problem happened after 5 months of use?  :|
    This means that this keyboard worked fine using the Vista and the Toshiba Recovery disk operating system but recently stopped working if the Microsoft OS is running.

    In my eyes it s a hardware issue ok, it s really strange that you can use it in the BIOS and the Linux system. But I recommend to contact the ASP (certified partner) in your country and ask if the technician could test with the new keyboard.

    I think that your warranty is valid and therefore everything must be covered by the warranty!

    Good luck

  • Re: Satellite L300D-13s - WiFi does not work with Vista

    I have a L300D-13s that came with Visa Home Premium on it.

    His work very well outside the wireless that refuses to work.
    I always "Wireless Association failed because Windows did not receive response from the access point or wireless router.

    The wiresless is a Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapt
    I am running the latest version of the BIOS and the 6.1148.924.2008 drivers dated 2008-09-24. If I use the latest drivers on the RealTek site, I get a message about an unknown error.

    If I use the NETWORK Ethernet card, then he gets a fine IP address so this isn't the show indicator to publish.
    Its not wireless security (I understand that Vista does not support WEP 128 bit). I turned off and it still does.

    Other laptops running XP connect correctly and this laptop connects fine using no security or WEP or WAP so I boot Linux.
    If the problem obviously lies with Vista and/or the drivers.

    If someone has solved this.

    And no - don't tell me to go out and buy a router "Vista compatible".
    If Vista does not work with router XP and other operating systems compatible with Vista is wrong.


    > Other portable XP connect correctly and this laptop connects fine using no security or WEP or WAP so I boot Linux. If the problem obviously lies with Vista and/or the drivers.
    I would say it is not a Vista problem or a Realtek driver problem because I have a Vista and Realtek WLan card and I can connect properly to my router.
    In you case, I would say that there is a compatibility problem between the router and the Vista because as you said the laptop can connect properly using Linux.

    I have goggled a bit and could solve most of the people who have had this issue, update the firmware on the router s.

    Maybe you should try that too.

  • Windows Update does not work under Vista

    Hello! I have Vista Ultimate 64 bit and a few weeks ago, I noticed that my windows updates had stopped working. I followed the instructions to do a repair of my drive, but got "the upgrade is not available. Press Cancel and then select upgrade to a newer version than what you have "." However, there is nothing that gives me this opportunity. How am I supposed to fix it then?

    I have a feeling that this happened after a service pack has been installed (3?), but as I put it to the automatic updates I have not noticed exactly when he had ceased. I'm frustrated and very frankly also irritated. I paid a fair bit for Vista Ultimate and I'm basically says my drive is useless. I ran the Microsoft Fix It, and he said he solved the problem, but it didn't. I also did a system restore and that do not also not fixed the problem. The error code I get whenever I have try to do an update is 80070490. I saw a lot of messages from people having this same problem, while searching for a solution, so there's obviously a problem somewhere I would appreciate to help get it sorted please.
    Thank you and best regards,

    Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2


    0 X 80070490 - ERROR_NOT_FOUND
    Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

    The error you receive occurs if there is corruption in the manifest of component maintenance base.

    Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
    "Explains the SFC / Scannow.

    See also: how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    A repair install is the usual solution of SFC/scannow does not work.
    However, a repair (AKA In-Place Upgrade) installation will be not solve the problem if it is due to a hijackware infection.

    You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

    NB: If you have installed SP1 or SP2 for Vista

    Step 7 (method for Windows Vista), the * UPGRADE option is not available because Service Pack/s are installed and that your operating system is newer than the system you are trying to reinstall, so service pack/s must be removed in this case.

    Uninstall the Service Pack/s: How to uninstall Windows Vista service packs as a troubleshooting step

    See also:

    How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008

  • Magic jack does not work on Vista

    Please help, I have tried everything with the Magic Jack support team and has even received a replacement and it does not work with windows.
    What can I do to fix this and get my Magic jack to work?

    Hello, Ray

    I'm moving your post on the Windows Vista Hardware forum.

    You may need to be upgraded, refer to the Windows Vista of the MagicJack Customer care site section:

    I hope this helps.

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • CD/DVD does not work under Vista

    I have a laptop Compaq Presario F700 under Windows Vista Home Premium.  For the first year and a half i have owned my laptop, my CD/DVD drive worked perfectly.  A month ago it has stopped working completely.  It does not appear in my computer or Device Manager and it does not open.  I don't think that the drive is defective because it will open when the first Compaq screen shows up, but when the Microsoft Corporation loading screen is up, it stops working.  I used Google to good use, but none of the solutions I found worked.  I tried to delete upper and lower filters but they aren't there, and I tried all the solutions Microsoft Fix - It nothing works.

    Any help is greatly appreciated


    Reader might indeed have gone wrong.

    Check with support from Compaq and their forums for known problems.

    Compaq - Support

    Compaq (HP) - Fourms

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista

    When you insert a CD or a DVD, Windows Vista may not recognize the disc

    Your CD or DVD drive cannot read or write media - A Mr Fixit

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    Drive CD - R or CD - RW Drive is not recognized as a recordable device

    Hardware devices not detected or not working - A Mr Fixit

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.


    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.


    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}


    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help

    CD/DVD units

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Logitech USB microphone does not work with Vista, Service Pack 2, PC. ____

    My Logitech USB Desktop Microphone does not work with my Vista, Service Pack 2, the PC.  He asks the driver, but Logitech says it's in the Vista software, here is the largest part of the error message:

    Windows has detected a new device attached to your computer, but did not find the driver software, to make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on its Web site.

    Signature of the problem: Problem event name: PnPDriverNotFound Architecture: x 64

    This seems to be a problem that's happened, but after searching for hours, I can't find a quick solution.  Any help?


    Please do as I suggested in the answer above is probably the solution.

    You can also do this after the above.

    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN


    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista


    Then lets refresh the USB stack

    Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
    all except the category itself - REBOOT - it refreshes the drive and battery USB

    This KB shows XP how to and the method of Vista is identical


    If necessary try these two:

    Tips for solving problems of USB devices - and a Mr Fixit

    Hardware devices not detected or not working - Mr. Fixit

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • TEMPRO does not work for Vista Ultimate x 64


    I have a Qosmio F50 - 10K and I installed Vista ultimate x 64 and the Tempro application does not work. After I installed, I left the start Tempro button checked and when I press finish it gives me this error:
    "internal error 2753.
    Toshiba.UI.controlpanelapplication.exe ".

    Same thing happens when I uncheck the box with start tempro.

    In both cases, nothing is left in the system, no files, no regstry, nothing.

    Help, please

    Thank you


    I searched on the Toshiba driver download page and I discovered, Tempro is available for Vista 32 bit and not 64 bit.

    I think so Tempro will not work on a 64 bit OS.


Maybe you are looking for