Adapter Ethernet Thunderbolt has stopped working after update 10.11.2.
Hello, after my update to 10.11.2 on my MacBook Pro retina 15 "mid-2015, my crush Ethernet Adapter has stopped working. It comes in the reporting system and it shows that it connected to ethernet, but in the network Panel, the State remains red and I don't get an IP address.
My colleague who has a MacBook 2013 15 "retina Pro also has the same problem. We tried the retail adapters Ethernet Thunderbolt, but still no connection on one of our networks.
Anyone else see this behavior?
Same problem here on my end 2013. In Recovery Mode, the card works (good trick to know if hardware is broken). Roll back via Time Machine works 10.11.1 and adapter. Adapter and 10.11.2 relocation does not-MBP-R all my colleagues in different years work well after the update.
BTW. : not only Thunderbolt Ethernet does not work, but the cards virtual Parallels (for shared and host-only) as well (only bridged mode works).
So far, all the stuff has failed. And now I will notify again before the update.
How is it possible that BIOS update recommended could turn off the LCD screen.
Currently I see almost anything on the screen, but vga port works. But increasingly,.
Intel graphics card is not recognized.
G72-a20EM screen has stopped working after updating the BIOS F.48.
What can I do to fix that?
I found the working version, and it is version F.08.
Supposedly new version have different Active cables, and this is the reason why the screen is dark.
So, case closed, everything is perfect.
I recently downloaded from Toshiba and installed Fingerprint Utility V18.104.22.168 (tc00407400c.exe) and since my fingerprint reader has stopped working.
The software opens but usually recognizes my fingerprints and can not connect any other way.
Have uninstalled and reinstalled several times and same result.
Device Manager says device works ok.
May I ask what model phone you have and what system do you use?
Probably, you need to delete stored fingerprints and after restarting again, you should try to register new fingerprints using the software update of fingerprints.
Have you tried that?
Hello, I installed Acrobat DC yesterday. Since then, printer Pdf Adobe has stopped working. It always gets stuck to software verification fonts printing source just hangs and I have to force its closure.
I tried to uninstall the printer and manually install, repair the installation of Acrobat, but nothing has changed.
So is - anyone help me? Thank you.
The fixed! So that's how I did it. As I said Distiller crashed when loading fonts. I noticed that, it crashed after loading the "Colonna MT" police, so I removed the police immediately after Colonna MT in alphabetical order. After the removal of the police, everything works perfectly.
If someone else should be useful, name of the font in question is com (sRB). Don't know why it causes Distiller DC crashing, or why it didn't happen with previous versions of distilling, but that's all.
Thanks for your help.
I upgraded my Macbook Pro to El Capitan 10.11.6 last week, and the row function keys have now stopped working. If someone has had this problem and how can it be solved?
Thanks in advance for your help (I'm not very tech savvy, so please, responses may be simplistic?)
The keys work when starting recovery?
This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.
I have disabled both of the Firefox Add-ons, I use (NoScript 22.214.171.124 & Ad Block Plus 1.3.6) and restarted the machines, but that has no effect. This problem is repeated on more than one PC, running XP Pro (sp3), Vista (sp2) professional and Server 2003 (sp2), just after the upgrade to Firefox 4, so the problem is definitely related to Firefox 4.
This could be linked to the new HTML5 rendering engine. To check for this possibility, you can temporarily disable.
- Open Subject: config
- In the filter box, type or paste the html5 and make a pause until the list is filtered
- Double-click html5.parser.enable to toggle it false
If it works after that, there may be some problems with your form layout (i.e., accepted in HTML4 but not accepted in HTML5), or you may have found a bug.
This forum focuses on the care of the end user. You can find more help web development on the mozillaZine Web Development Council. Separate forum, separate registration. Please note the advice in the Post sticky at the top of the forum before posting.
After update 10 December 2015 for OS X version 10.10.5 - video not playing not in iTunes - no TV doesn't show (time at the bottom of the black screen counter remains at 0:00), movies (video meter at the bottom of the black screen ACCOUNT BEFORE, but no picture/no sound) and no previews film/TV on iTunes Store (time at the bottom of the black screen counter remains at 0:00)
You are not alone! Please visit this community of Apple Support with the link below. And please telephone tech support at Apple and establish a record of the case. The case of several files the fastest, that this will be resolved. It is more likely that the last security update actually crashed the video look at a capacity of iTunes for users of Yosemite. This is a BIG PROBLEM.
Judgment of workstation works on Win XP computer after recent upgrades.
Can not restart the workstation service. Event ID 3113.
The observer of events without help.
LAN Local Area Connection network connection.
Name of the operating system Microsoft Windows XP Professional
Version 5.1.2600 Service Pack 3 Build 2600
Check the sfc/scannow for files of error... No. Nothing obvious in the registry or the firewall.
Do not reboot or repair either Service Wizard.
Can not update the IP address.
Works fine on other computers running XP not upgraded.
Searching the Internet for answers, seems that this problem exists for some time, but as usual, many complaints, all options, not solutions.
Seem like it happened on the last update on all versions of M$ for years. Another M$ conspiracy to force users to upgrade.
Any solutions would be appreciated.
No, I don't want to upgrade to Windows 7 at least a year.
I solved the problem by reinstalling the client for microsoft networks component in the network connection properties.
My illustrator CS3 has stopped working after I updated my OS to Yosemite 10.10.5, but my InDesign and Photoshop work very well. How can I get Illustrator to start working again?
NOTE: I read a previous thread on the opening of the Java Control Panel in the system preferences (because I installed the new java my computer asked me for marketing immediately after in the new yosemite), but there is no icon Java not found. I installed this new java download more than once and still can not find it. Help!
If the suggestion on possible recording by Larry fails, see this page
I'll try to ask a personal forum friend who knows what to do.
For download, read this
and update, see
I have a T5010 e-machines running Windows 7 Pro, x 64 with 2 GB of RAM. The audio has stopped working after a few updates. Don't know which because he has many people who installed at the same time.
I tried to uninstall the audio driver then reinstall. I tried the shooters to boredom.
In Device Manager the drive is recognized, but the question mark yellow and says that the device does not start and he has (code 10). When I start the computer, I get a message that does not start the Realtek audio.
Since I have no more options about what to do to solve the problem can anyone here help me get the sound working again. Thank you.
Refer to the suggestions of Shinmila H said on December 10, 2009 and check if that helps.
You can also check:
Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.
Anyone Bitmoji keyboard stop working after updating iOs 10?
Anyone Bitmoji keyboard stop working after updating iOs 10?
Someone posted on another thread a tweet from Bitmoji they are currently declining, but working on the issue.
iPhone more replaced 6 speaker stopped working after update to iOS 9.3.4.
New speaker of iFixit. After replacement speaker works perfectly. With FaceTime, the call, music, etc. And IPhone running on iOS 9.3.3. But after the update to IOS 9.3.4 speaker stopped working. Several restarts and total content and deletion of parameter did not help.
New speaker of iFixit.
It is a problem.
iPhones are not serviceable by the user.
You're on your own. After this service yourself, you finished your warranty (if she was still in effect), and Apple will not help you either.
Fingerprint reader has stopped working after installing Norton Internet Security 2012 on both of my notebooks from HP.
Product name: HP Pavilion dv6
Operating system: Windows 7 64-bit
Error message in Device Manager under biometric devices in Device Manager displays an exclamation mark beside validity sensors (WBF) (PID = 0018). The following message is under the general tab: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ».
Driver is present and seems to be up-to-date.
Appreciate your help.
I have finally isolated the problem of my software lack of HP dv6 fingerprint reader. I think Norton Removal Tool, available online at www.symentec.com/nrt, was the reason. I am sure this conclusion because the exact same problem occurred after I installed Norton Internet Security 2012 on laptop HP same as my wife. I tried, in vain, to uninstall and reinstall the driver for the biometric fingerprint device provided by Validity Sensors, Inc.
After spending a day and a half to try to "solve" the problem, I decided to restore my system and go back to the prior agreement of the point of the installation of Norton. Thank you HP to make this process quick and painless. Don't forget that if you installed anything after the restore point, it will have to be reinstalled.
Fortunately, there's a less intrusive on CD of Norton removal tool. This utility uninstalls an older version of Norton you are requested to restart and then installs the latest NIS. It is a method of removal safer that wide brush offered by the Norton Online link, which wipes everything remotely suspect.
After reinstalling Norton Internet Security 2012 from the CD, everything works as it should, including the fingerprint reader.
"First Pro CC 2014.2 has stopped working" after a few moments of running and usually after you import a video clip.
I use a Lenovo T440p with Intel Core i5 @2 laptopp. 60 GHz, 8 GB of RAM. Windows 7 64-bit with Service Pack 1. Intel HD 4600 graphics card. All the drivers are up to date.
All other non - CC Adobe video editing programs work.
Help, please. Thank you.
Changing the video rendering engine should have solved the problem. Is it still pending?
has stopped working properly because a compatible driver is not available for this version of Windows. This is the error I get and it made my computer unable to re boot. Please help me how to set right.Thank youy
you left in the name of material on
DM9601 USB to Fast Ethernet card; fix?
and sorry, but I cannot find a driver for him after XP
you are also posting in the wrong forum
Try the forum hardware and drivers
or contact the hardware manufacturer
they write drivers for their products, not from microsoft
try a restore of the system before this happened
If necessary do in safe mode
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
Maybe you are looking for
Hello everyone, I am looking to write a program to assign physical channels pragmatically to a task for the acquisition of data that will be used to record data. In the sake of understanding, the program will be used to save the data of thermocouple
When I open the HP AIO Printer Remote application on my computer and press on Print Documents under controls, I see only PDF files. This means I can't print a document that is on my computer from the application, unless it's a PDF file. I can open t
How to get the IP address of the client when TCP connect on the server. The only parameter obtained the login is the login ID.
Hello world I just changed from an external hard drive of 500 GB to 3 to one, but if I leave that new connected for starting my computer the computer crashes to the thinkpad logo and launch startup. The boot order is set to boot from the internal har
Hi all Please give me an idea on dynamic locations. At present iam using the localization file it works fine locally, but is new scenario: I need to download the file location on the server side and dynamically change the value. Please help me if any