Adapter Exchange 2016

Similar Questions

• Exchange 2016

  Hello, we use the latest version (5.4.3.106), but it seems that the 2016 Exchange is not officially supported.

  If someone has tested compatibility with Exchange 2016, or when he officially will support?

  Thank you!

  AppAssure 5.4.3.106 can't exchange 2016 for mountability controls either the checksum.  Also, it does not support a granular restore of Exchange data.  You should be able to back up the volumes of Exchange not different to any other Exchange Server and get consistent backups, the tools for working with these data simply are not compatible with it yet.  We have not tested with truncation of the newspapers either.

  Official support of Exchange 2016 come a future generation.  We don't have an ETA for Exchange 2016 support right now.

• Wall - plug adapter Exchange program announcements Polish translation

  Hi all!

  Just to be sure, is this recently announced Exchange adapter taken wall (original announcement) is only related to the adapter from the wall socket - plug - not the whole charger? I only ask because the translation of the announcement in Polish is clearly indicating that the charger as a whole must be exchanged.
  It seems that they (the people who created this translation) too use Google Translate as their daily working tool.

  See you soon!

  It's just the take - you remove the block and they will exchange it.

• Apple AC adapter Exchange program outlet

  So, I checked online and my 3 phones adapters were eligible for replacement.

  According to the instructions here - I have 3 options:

  Exchange process

  Please choose one of the following options below. We need check the serial number of your Mac, iPad, iPhone, or iPod as part of the Exchange process, so please find your serial number in advance. It is easy to find the serial number of your device .

  • Exchange your cards to your Apple Store or an provider of services authorized Apple.
  • Ask for a replacement via the web.
  • Contact Apple support.

  So I chose to ask for a replacement via the web.

  After completing the steps, I was told "Take your (phone) and below (any office job) label" - and that I should not all the other elements.

  There is, however, no label to print or download.

  And it was not not clear if I would return the small adapter which would be replaced.

  I tried to contact Apple Support, but there is no option to inquire about due process. And my phones as officer of the WATCH, it would cost me about $40 to proceed with this inquiry.

  -Maybe someone here could help.

  Do we need to post the part that needs to be replaced?

  Could someone clarify the steps further away?

  LLA is happened to me too

• Exchange 2016 production critical bug control 2012 server crash on the server cluster server

  What happened 2 times, just a sudden failure, I have a memory dump but its too big for me to open. Help, please.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet Exchange Server forums.

  https://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=ExchangeServer

  See you soon.

• Immediate error prealloue expandable disk conversion

  Windows 7 x 64, vmware Workstation 12. I'm trying to convert a disk preallocated a growable since half of the 140 GB are not used.

  I entered the following command at the command line prompt:

  VMware - vdiskmanager.exe - r "D:\Virtual Machines\Server\C.vmdk" t 0 "D:\Virtual Machines\new.vmdk".

  Here is the output of this command:

  Creation of disc "D:\Virtual Machines\new.vmdk".

  NOT_REACHED bora\lib\disklib\diskLibMisc.c:483

  Using Win32 object: GDI 4, 1 USER

  CoreDump: Write minidump in C:\Users\J\AppData\Local\Temp\vmware-J\vmware-vdiskmanager.dmp

  Opening of the dmp file listed above give this point of failure:

  2016 01-19 T 11: 51:27.440 - 05:00 | vthread-4 | I125: VixDiskLib: VixDiskLib_Connect: establish a connection.

  2016 01-19 T 11: 51:27.440 - 05:00 | vthread-4 | I125: VixDiskLib: VixDiskLib_Clone: make a clone of disc.

  2016 01-19 T 11: 51:27.447 - 05:00 | vthread-4 | I125: DISKLIB-DSCPTR: open [0]: "4b955744f81011e380b4806e6f6e6963.datto" (0xe)

  2016 01-19 T 11: 51:27.447 - 05:00 | vthread-4 | I125: DISKLIB-LINK: open 'D:\Virtual Machines\Server\C.vmdk' (0xe): vmfs, 292945983 sectors / 139.7 GB.

  2016 01-19 T 11: 51:27.447 - 05:00 | vthread-4 | I125: DISKLIB-LIB: open 'D:\Virtual Machines\Server\C.vmdk' (0xe, type vmfs flags).

  2016 01-19 T 11: 51:27.447 - 05:00 | vthread-4 | I125: DISKLIB-LIB_CREATE: CREATE: 'D:\Virtual Machines\new.vmdk' - monolithicSparse ability = 0 (0 byte) adapter = invalid info = size = 128 political = objType = "

  2016 01-19 T 11: 51:27.450 - 05:00 | vthread-4 | I125: PANIC: NOT_REACHED bora\lib\disklib\diskLibMisc.c:483

  What causes this error and how can it be solved?

  Thank you

  Joe

  Now that was fun - thank you for the question.
  I can reproduce this now - he actually gives a good indication in the last line before the panic: invalid = adapter

  2016 01-20 T 02: 48:04.025 + 01:00 | vthread-4 | I125: VixDiskLib: VixDiskLib_Clone: make a clone of disc.

  2016 01-20 T 02: 48:04.040 + 01:00 | vthread-4 | I125: Hostinfo_OpenProcessBits: OpenProcess access bits are 1000.

  2016 01-20 T 02: 48:04.040 + 01:00 | vthread-4 | I125: FILE: FileLockScanDirectory throw g:\_vms_\monolithicflat.vmdk.lck M10277.lck': 27532-130977279873508300(vmware-vdiskmanager.exe) invalid executionID.

  2016 01-20 T 02: 48:04.056 + 01:00 | vthread-4 | I125: DISKLIB-DSCPTR: open [0]: 'monolithicflat - flat hard' (0xe)

  2016 01-20 T 02: 48:04.056 + 01:00 | vthread-4 | I125: DISKLIB-LINK: opened 'g:\_vms_\monolithicflat.vmdk' (0xe): vmfs, 292970496 sectors / 139.7 GB.

  2016 01-20 T 02: 48:04.056 + 01:00 | vthread-4 | I125: DISKLIB-LIB: open "g:\_vms_\monolithicflat.vmdk" (flags 0xe, type vmfs).

  2016 01-20 T 02: 48:04.056 + 01:00 | vthread-4 | I125: DISKLIB-LIB_CREATE: CREATE: 'g:\_vms_\vmfs-to-spars2ef.vmdk' - monolithicSparse ability = 0 (0 bytes) adapter = Invalid info size = 128 = political = objType = "

  2016 01-20 T 02: 48:04.056 + 01:00 | vthread-4 | I125: PANIC: NOT_REACHED bora\lib\disklib\diskLibMisc.c:483

  To cause the crash I gave an incomplete descriptorfile:
  (Incomplete - well after my own definitions at least - I don't know that if a minimum vmdk descriptor syntax should work with WS 12 has already been documented?
  Anyway - I guess you have to set

  version = 1

  CID = fffffffe

  parentCID = ffffffff

  createType = "VMFS".

  RW 292970496 VMFS "monolithicflat - flat hard."

  ddb.adapterType = "free".
  to be considered as minimal, but valid descriptor for a conversion action. Here, I get a crash if I set only

  version = 1

  CID = fffffffe

  parentCID = ffffffff

  createType = "VMFS".

  RW 292970496 VMFS "monolithicflat - flat hard."

  So it seems that vdiskmanager did not expect to ever see descriptorfiles that don't NOT definde ddb.adapter.
  It can handle a bad value as ddb.adapterType = "aunt-dorothies-favorite-sausage" with a useful error - but the parameter should be set.
  Doesn't really matter if - almost all of the descriptors automatically created should work - manual changes would be the only reason for which I could imagine as a possible reason...

  Maybe your problem is caused by the same similar thing? -fix would be easy to verify anyway.

  # Disk DescriptorFile

  version = 1

  #encoding = "windows-1252".

  CID = fffffffe

  parentCID = ffffffff

  createType = "VMFS".

  # Description of the measure

  RW 292970496 VMFS "monolithicflat - flat hard."

  # The database disk

  #DDB

  #ddb.adapterType = "free".

  #ddb.geometry.cylinders = "18236.

  #ddb.geometry.heads = "255".

  #ddb.geometry.sectors = "63".

  #ddb.virtualHWVersion = "10".

  Red vmdk descriptor crashes with core dump - blue descriptor works.

  # Disk DescriptorFile

  version = 1

  #encoding = "windows-1252".

  CID = fffffffe

  parentCID = ffffffff

  createType = "VMFS".

  # Description of the measure

  RW 292970496 VMFS "monolithicflat - flat hard."

  # The database disk

  #DDB

  ddb.adapterType = "free".

  #ddb.geometry.cylinders = "18236.

  #ddb.geometry.heads = "255".

  #ddb.geometry.sectors = "63".

  #ddb.virtualHWVersion = "10".

  Don't be surprised - I commented several ddb.parameters - for conversion, they aren't necessary, and I wanted to exclude no side effects using the smallest valid selection.

• tcUtilityFactory does not work.

  Guru
  
  I call tcUtilityFactory itself, but my code fails with the error below. I want to just use of IOM Api creating a box letters... I need the name dn and database, so I used the Api of the IOM... but its does not work for me.
  
  I use OIM9.1 with Exchange 2007... I also copied jar required on RM JavaTask.
  
  FATAL November 28, 2012 19:31:14, 929, [LOGINFACTORY], could not load LoginFactory:Thor.A
  SIM Security.LoginHandler.@appserver_typeLoginHandler
  java.lang.ClassNotFoundException: ADP ClassLoader load failure: Thor.API.Secur
  Ity. LoginHandler.@appserver_typeLoginHandler
  at com.thortech.xl.dataobj.tcADPClassLoader.findClass (unknown Source)
  at java.lang.ClassLoader.loadClass (unknown Source)
  at java.lang.ClassLoader.loadClass (unknown Source)
  at java.lang.ClassLoader.loadClassInternal (unknown Source)
  at java.lang.Class.forName0 (Native Method)
  at java.lang.Class.forName (unknown Source)
  to Thor.API.Security.LoginHandler.LoginHandlerFactory.getLoginHandler (United Nations
  Known source)
  at Thor.API.Security.ClientLoginUtility.login (unknown Source)
  to Thor.API.tcUtilityFactory. < init >(Unknown Source)
  at com.pldt.adapter.exchange.EnableMailBox.EnableMailBoxForUser (EnableMa
  ilBox.java:74)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)
  at java.lang.reflect.Method.invoke (unknown Source)
  to com.thortech.xl.remotemanager.RemoteManager.invokeInstanceMethod (Unkn
  own Source)
  at com.thortech.xl.remotemanager.RemoteManager.invokeMethod (unknown safe
  This)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)
  at java.lang.reflect.Method.invoke (unknown Source)
  at sun.rmi.server.UnicastServerRef.dispatch (unknown Source)
  to sun.rmi.transport.Transport$ 1.run (unknown Source)
  at java.security.AccessController.doPrivileged (Native Method)
  at sun.rmi.transport.Transport.serviceCall (unknown Source)
  at sun.rmi.transport.tcp.TCPTransport.handleMessages (unknown Source)
  to sun.rmi.transport.tcp.TCPTransport$ ConnectionHandler.run (unknown safe
  This)
  at java.lang.Thread.run (unknown Source)
  ERROR, November 28, 2012 19:31:14, 945, [XELLERATE. ITSELF], class/method: RemoteMan
  Ager/invokeInstanceMethod some problems: {1}
  java.lang.reflect.InvocationTargetException

  I said to auth for JBoss

  System.setProperty ("XL. HomeDir", ' C:/DC/config');
  System.setProperty ("java.security.auth.login.config", "C:/DC/config/auth.conf");
  System.setProperty ("java.security.policy", "C:/DC/config/config/xl.policy");
  System.setProperty ("log4j.configuration", "C:/DC/config/log.properties");
  LDAPADConnector adConnector = new LDAPADConnector();
  LDAPADConnector adConnector = new LDAPADConnector();
  System.out.println ("* inside EnableMailBoxUser *");
  Config ConfigurationClient.ComplexSetting = ConfigurationClient.getComplexSettingByPath ("Discovery.CoreServer");
  System.out.println ("* inside EnableMailBoxUser1 *");
  Hashtable env = config.getAllSettings ();
  System.out.println ("* Env *" + env);
  ioUtilityFactory = new tcUtilityFactory (env, "xelsysadm", "*");

  And I suppose also that your Console Design work from which you copied that folder config
  Have you copied pots of the Jboss Console Design Directory, also copy those also.
  Set all your DC pots in CLASSPATH (you forgot to mention)

  http://IDM-Oracle.blogspot.com/2009/02/OIM-9101-on-JBoss-423ga.html

  Published by: Rajiv Dewan

• Label/barcode for Exchange AC adapter

  Hi all

  I tried to Exchange my power adapter via Australia Post. (as shown in http://www.apple.com/au/support/ac-wallplug-adapter/)

  On the confirmation page, it asks for a label/code bars (for scanner post office staff), but I don't see everything.

  Thank you!

  

  Seems that he is not really one.

  They would meet in a day or two to tell.

  We will send you the replacement part immediately. After the part has been shipped, you will get another email.

  From the information you have provided, we believe that your repair will be covered. For more information on Exchange and the Apple repair Extension programs, visit the Apple Support site.

• Exchange of wall plug adapter Apple AC - Airport express

  Hello

  The list of exchange programs Apple AC power adapter plugs for Iphone/iPad/iPad/mac - with explanation on how to identify the affected cards. It Tuns on that my plug for my AirPort Express Base Station has the same affected care. However, this s/n will accept not under the replacement program.

  The program is supposed to work for caps from 2003 to 2015 - the unit is 2011. I don't know why Apple customer security statement does not apply to Airport express base station. Is anyone here able to explain this?

  Since I have small children, I decided to unplug the AirPort express base station as I guess that is not safe since it has identical to the affected card registration. Someone in the registry here the same problem with their caps for the AirPort Express Base Station?

  Kohl

  Just an update - when I enter the s/n on the AirPort Express base now - he accepts and candle replacement can be ordered. So problem solved - thanks.

• Autodiscover for Exchange 2010 Outlook 2016

  We have an exchange server 2010 SP3, serving clients Outlook 2010,2013 and 2016. When the server has been set up to detect automatically a MS Outlook kept connectivity test fault but the overall test said that automatic detection works. The test which is a failure is

  

  We recently purchased MS Office 2016 for two clients. These clients connect locally using auto-discovery, but do not connect using automatic discovery on the internet. We use a split DNS where the internal network is .local and the external DNS is hosted somewhere else. I tried to modify the DNS as suggested in other articles. But the result was no e-mail from the internet. Local e-mail only. So if the above question prevents Outlook 2016 operating outside the local network. How can I fix Exchange 2010 to get Outlook 2016 to work from the internet? I should add that Outlook 2010 and 2013 customers work with automatic detection in the network and the internet.

  Better to call on Technet: https://social.technet.microsoft.com/Forums/office/en-US/home?forum=exchange2010

• Mac with Outlook 2016 users do not get coonected to exchange server

  Hi all

  I am new to the community. Current configuration is Exchange 2010, AD 2008.

  1 hubcas and Server 2 mailbox store Dag servers.

  One of my MAC users has a problem in the configuration of Outlook 2016 on his Mac. Below is the error I get in Exchange server:

  Inbound authentication failed with error logon denied for the client to receive connector (Ex hubcas server Name). The authentication method is NTLM.

  As I try to find the solution I discovered that the receive connectors are 2 in my hub/case of exchange server. A default value and another name is customer and both are enabled with different setting. Please check the reference Images.

  My question is that:

  1. is it ok to have two reception enabled connectors.

  2 connection refused messages comes from what connector and which connector is used by my clients.

  3. How can I solve the problem of the Mac user.

  

  Hello

  Thanks for posting your question on the Microsoft Forum.

  As you are using an Exchange Server e-mail account.

  I suggest you to ask your question in the TechNet forums.

  http://social.technet.Microsoft.com/forums/en-us/home?category=ExchangeServer

  TechNet is watched by other computing professionals who would be more likely to help you.

  I hope this helps.

  ___________________

  Thank you best regards &,.

  Isha Soni

• Help, please! problem with enhanced vmxnet adapter and Exchange 2003 VM

  Hello

  I recently changed internal NIC our Exchange Server 2003 computer flexible to vmxnet virtual improved, with recommendation of Scott Lowe to modify the *.vmx after taking the inventory server.

  I put the server in the inventory and restarted... then went in through the window / VIC and set a static IP address on Local 2 the new map of the NETWORK, as it was called.

  "I get this message from server: IP address, you have entered for this network adapter is already assigned to another adapter ' VMware Accelerated PCNet Adapter," then it goes on to say that it is hidden from network connections because it is not physically in the computer, there may be network problems and I would like to assign a different IP address... etc.

  Image is attached.

  I tried to do a repair of the VMware Tools, and he did install the vmxnet driver.

  What should I do to banish the network confiict etc. - it is causing people to not be able to use Outlook and disable RDP etc.

  Or how can I get rid of the AMD NIC reference? I don't see it in either Device Manager...

  Thank you!!

  PS Web access for Exchange behaves funny too - messages are sometimes sometimes they aren't - and a few times: "HTTP/1.1 503 Service unavailable" messages

  All this has happened after changing the NETWORK type card - there's no indication anywhere where something like this could happen.

  VMX list section of ethernet, perhaps the error is in the vmx file?

  ethernet0. Present = 'true '.

  ethernet0.virtualDev = "vmxnet.

  ethernet0. Features = "15".

  ethernet0.wakeOnPcktRcv = "false".

  ethernet0.networkName = 'network of the VM.

  ethernet0. AddressType = 'vpx.

  Only the added lines were manually names and functions.

  I really need to get this resolved... maybe I should change back to soft?

  I'd be better off using the method KB VMware to change the NETWORK adapter that requires a change to the description of the OS?

  Message edited by tom12010 to add information

  Try this too...

  1. Select start > run.

  2 type cmd.exe, and then press.

  3. at the command prompt, run this command:

  Set devmgr_show_nonpresent_devices = 1

  4. Enter Start DEVMGMT. MSC and press ENTER.

  5. Select discover > show hidden devices.

  6. expand network adapters (select the plus sign next to the entrance of network adapters)

  7. right click on the adapter and then dimmed network choose uninstall.

  8. close the Device Manager.

• Problem status Microsoft 6to4 has a driver problem detected other Solutions to adapt Hardware Exchange may not detected

  Map Microsoft 6to4 has a driver problem	Detected		Other Solutions
  Hardware changes may not have been detected

  Hi M. - Tottimeemoo.

  According to the description of the problem, it seems that you are having problems with "Microsoft 6to4 adapt has a driver problems. I will defintiely help you with this question.

  -Did you do changes on the computer before this problem?
   
  Method 1: I suggest you to see link below and check if it helps.
  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/kb/932520
   
  Method 2: I also suggest you to uninstall and reinstall the network card and check if that helps.
  http://TechNet.Microsoft.com/en-us/library/cc753699 (v = WS.10) .aspx
   

  I hope this helps. Try the above steps and get back to us for assistance. We will be happy to help you.

• Adapter recall during January 2016

  The power supply is the problem and not the iDevice, why are we asked to dig the unreadable serial number 1 tiny police to justify the replacement? It makes no sense at all.

  A good question of rhetoric, but you don't talk about Apple here.

  It is a community of international users, made up of volunteer support.  Management and Apple product teams do not participate, review or clarify the decisions of businesses here.

• Error completing in bulk using adapter Jena

  We try to use the adapter of Jena in block triple load in our model.  We are able to successfully stage the data, but when we run in bulk full, we receive an error ORA-14098.  We successfully the bulk loaded data in the past, and this is the first time this error appears.  Here is the stack trace:

  ERROR [2016-02-03 10:09:07, 535] - [home] - [OracleJenaModelProvider] - couldn't complete the massive update due to the SQL Exception.

  java.sql.SQLException: ORA-13199: EXCH: SQLERRM = ORA-14098: incompatibility of the index for the ALTER TABLE EXCHANGE PARTITION tables

  ORA-06512: at the 'MDSYS. MD", line 1723

  ORA-06512: at the 'MDSYS. MDERR", line 17

  ORA-06512: at the 'MDSYS. SDO_RDF_INTERNAL', line 6565

  ORA-06512: at the 'MDSYS. SDO_RDF', line 707

  ORA-06512: at the 'MDSYS. RDF_APIS', line 893

  ORA-06512: at line 1

  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:440)

  at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:396)

  at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:837)

  at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:445)

  at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:191)

  at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:523)

  at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:204)

  at oracle.jdbc.driver.T4CCallableStatement.executeForRows(T4CCallableStatement.java:1007)

  at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1315)

  at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3576)

  at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3677)

  at oracle.jdbc.driver.OracleCallableStatement.execute(OracleCallableStatement.java:4714)

  at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1374)

  at oracle.spatial.rdf.client.jena.Oracle.executeCall(Oracle.java:807)

  at oracle.spatial.rdf.client.jena.OracleBulkUpdateHandler.completeBulk(OracleBulkUpdateHandler.java:1648)

  at oracle.spatial.rdf.client.jena.OracleBulkUpdateHandler.completeBulk(OracleBulkUpdateHandler.java:1578)

  at oracle.spatial.rdf.client.jena.OracleBulkUpdateHandler.completeBulk(OracleBulkUpdateHandler.java:1556)

  Can anyone point us in the right direction for tables and indexes, we should look at?

  Just a note to the State. The problem has been resolved. Index PCSGM RDF_LINK$ table turned out be defined as not unique. Loading bulk still waiting for this unique index. This caused the incompatibility of index. The problem was solved by changing the index PCSGM of RDF_LINK$ to be UNUSABLE single and then rebuild. Mass now loaded successfully.

  Thank you

  -Smiled.