Adapter has stopped working

Similar Questions

• Satellite L770 - ethernet adapter has stopped working

  Hello
  I have three laptops all connectable to my home hub, but I seem to have serious problems with the latest model, L770-13D. The signal strength has never been as good as the older models, and most recently the Ethernet adapter has stopped working. I have updated drivers on the two adapters, but it did make a difference. I recently updated my connection and I wonder if the Ethernet adapter is not configured correctly because it was working fine before the upgrade.

  I also tried almost all the tests I can do - Toshiba config doctor returned a FAILURE on the verification of the material that I did, but the device manager says that the two network cards work OK. Also, troubleshooting reports wireless adapter that it "can be a problem", the evidence seems to be directed towards a hardware problem with this laptop.

  Any thoughts?

  Have you noticed this Ethernet problem on the first day? Otherwise, I recommend you to reinstall the OS using original recovery image and test once more with the factory settings. Recovery image contains the drivers right and tested. It is also configured to be used immediately after the first start, so it shouldn't be a problem.

  Have you ever done this?

• Satellite C665 - Ethernet adapter has stopped working

  Hello
  A few weeks ago, I noticed that the ethernet adapter has stopped working. It has disappeared from the Device Manager, and I can only access internet by wifi.

  When I turn off wifi and connect the ethernet cable (which connects to the modem) nothing works.
  I tried to restore the windows settings, but that didn't work.

  Can someone help me?

  It is possible that the LAN module is defective.
  All you can do now is to check and install the original recovery image and check the functionality with the factory settings. If the problem persists it is definitely hardware problem.

  I think that it is not worth to fix it if you can continue to work with WLAN connectivity.
  What do you think of this?

• Lightning network adapter has stopped working

  Hello

  All of a sudden, my (original Apple) map network Thunderbolt has stopped working. I'm looking for advice to get it working again without reinstalling. This is the second time in 6 months that it happened, and the last time a reformatting it fixed and restore my entire user account does not restore the problem, so all signs point to something in the heart of the system and not "userland".

  Why I know that the adapter is not the problem:

  -Adapters two colleagues also do not work

  -Adapter works very well in recovery, but not once started

  What happens when I plug:

  -Lights led network switch, so a link is established

  -L' adapter remains 'red' in the network settings

  -dmesg shows:

  IOThunderboltSwitch < 0 > (0x0): listenerCallback - HPD Thunderbolt package for road port = 0 x 0 = 1 disconnect = 0

  [Start of PCI configuration]

  [End of PCI, bridges 14, 15 devices configuration]

  No obvious signs of problems.

  Steps taken to solve the problems:

  -If I delete the card of network settings, I can never add again; He simply never shown even if it is plugged in and the link light is on the switch.

  -Crushed/Library/Preferences/SystemConfiguration and restarted. Always impossible to add the interface, as mentioned above, it never appears.

  At this point, I am of ideas. Any help would be greatly appreciated.

  Thank you!

  Figured it out... it's driver Linksys USB3GIG crap that breaks the kext IONetworking signature.

  ERROR: invalid signature for com.apple.iokit.IONetworkingFamily, does not load

  After removing AppleRTL815 * from /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/ and restart, thunderbolt ethernet is back

• 'WMI Performance Reverse Adapter has stopped working ".

  I am running Vista Home Premium 64-bit, and this error has occurred from time to time during the last 48 hours. Nothing seems to rush the error dialog box is displayed, I erase it and I return to work.

  Event Viewer log shows an error of 1000 with the following data:

  Failing application WmiApSrv.exe, version 6.0.6002.18005, time stamp 0x49e02765, failed module wmiprov.dll, version 6.0.6002.18005, time stamp 0x49e042a1, exception 0xc0000005, offset error 0x0000000000021cf1, process 0x1e80 id code, start the application time 0x01cf490df7d8f920.

  Several web searches have turned up nothing on how to solve it. All Windows updates have been applied; PC has been restarted after each.

  Anyone can shed some light?

  Hello

  The WMI Performance Adapter (wmiApSrv) service provides information of suppliers of Windows Management Instrumentation (WMI) performance library to clients on the network. This service runs only when the Performance Data Helper is activated.

  This service is installed by default, and its startup type is manual. When started in the default configuration, it connects by using the Local System account.

  When the issue occurred?

  Can you associate it with software or hardware changes?

  You attend a BSOD with the question (blue screen errors)?

  Disconnect devices, keep doing what you are doing and to see if the error occurs

  Restart and start typing the F8 key

  Select Mode safe mode with networking

  Download the following command to determine if the malware has invaded the system.  Run a full scan.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Start > type CMD

  Right click on CMD and select run as administrator

  Type SFC/scannow

  Press enter

  Note: There is a space between sfc and / scannow

  When you are finished, run chkdsk in the command prompt window

  Type chkdsk /F /R

  Press enter

  You will receive a message that the volume must be locked and you want to start research on reboot.  Press y and press enter

  Reset for the scan at startup

  This analysis takes longer than the System File Checker

  When finished, continue as before to determine if the problem persists.

  You can also try to solve the problem using the clean boot

  How to perform a clean boot in Windows

  http://support.Microsoft.com/kb/929135/en-us

  Remember to restore the normal startup system when finished.

• my laptop crashes and tells me my network adapter has stopped working. How can I fix it?

  anyone else having this prob? its also saying the driver on my vista version is compatible... what that all about?

  Update your network adapter drivers. You won't get them from site of the computer laptop mftr... First uninstall the 'old'. MS - MVP - Elephant Boy computers - don't panic!

• Why my wireless adapter has stop working on my brand new hp pavilion g7-1338dx.

  I ran the wizard network without success and reset my router several times. When I get it to connect, it will stay connected until I stopped. Then when I turn on the computer the next time it doesn, t want yo connect.

  It, s a new brand Paviloion HP g7-1338dx running Windows 7 Premium Home Edition.

  If you need more information, let me know!

  I appreciate all your advice, but I've had a lot a more simple solution. Got a new router from AT & T and Walla, no more problems.

  The only thing I can think to problems with my old router that supported 8032.11 a, b and the new router that supports 802. 11A, through 802.11 g

  Maybe it was the difference in the Protocol of security between the two and try to pass between the two.

• Adapter Ethernet Thunderbolt has stopped working after update 10.11.2.

  Hello, after my update to 10.11.2 on my MacBook Pro retina 15 "mid-2015, my crush Ethernet Adapter has stopped working. It comes in the reporting system and it shows that it connected to ethernet, but in the network Panel, the State remains red and I don't get an IP address.

  My colleague who has a MacBook 2013 15 "retina Pro also has the same problem. We tried the retail adapters Ethernet Thunderbolt, but still no connection on one of our networks.

  Anyone else see this behavior?

  Same problem here on my end 2013. In Recovery Mode, the card works (good trick to know if hardware is broken). Roll back via Time Machine works 10.11.1 and adapter. Adapter and 10.11.2 relocation does not-MBP-R all my colleagues in different years work well after the update.

  BTW. : not only Thunderbolt Ethernet does not work, but the cards virtual Parallels (for shared and host-only) as well (only bridged mode works).

  So far, all the stuff has failed. And now I will notify again before the update.

• Satellite Pro L20: Adapter WLan has stopped working and will not allow

  Hello

  I have a L20 Pro Satalite, which works very well. However, just before Christmas 2006, the adapter wireless (Atheros AR5005G) has stopped working.

  Windows XP Pro SP2 can see the adapter and network connections shows as being activated, but he sees not all networks.

  The Atheros Client Utility says that the adapter pases troubleshooting TI test diagnosis up to the Radio, when he says that the Radio is disabled and must be enabled in the Client utility.

  'Excellent!', I thought: opening the utility forward. Looked in the Action menu to find "turn on the Radio" is greyed out!

  Help!

  Any help is very welcome.

  See you soon,.

  Barry Smith.

  Is there a hardware option to enable and disable your wireless network card? (switch)
  You upgrade your Wlan driver recently? (If Yes, maybe with the wrong driver?)

  I had a similar problem once and resolved through driver updates... want to give it a try?

  You can download the driver generic Atheros (Version 5.0.0.107) available here:

  http://www.DD-WRT.com/DD-wrtv2/down.php?path=downloads/drivers/&download=Atheros5_0_0_107.zip

  Concerning

  chain

• Startup error message: "Microsoft Mobile PC presentation adaptability Client has stopped working".

  I recently tried to install SP2 to Vista, but it failed. I tried all the resolutions posted, but it is not always correct it. Later, I started my Vista (automatically restored to SP1) and it came with a mistake, "Microsoft Mobile PC presentation adaptability Client has stopped working". I tried searching on the net for similar problems, but I could not find any solution. He comes back every time you start, after that the background, shortcuts and the system tray loaded. This error started showing when I tried to install SP2, but he failed and returned to changes. I think that something could have gone wrong and that's why it shows this message.   Today I tried the system restore to the restore point JUST before I tried to install SP2, but it ALSO failed and brought me back to the State.
  I'm not sure if it's related, but I'm also no longer be able to use Windows Media Center, as every time I start it I immediately receive the error message "Media Center has stopped working".
  My computer:
  Gateway M6842B laptop
  Version of Windows Vista SP1 32-bit
  Intel Core 2 CPU
  T5300 @1. 73 GHZ 1.73 GHZ
  2.00 GB OF RAM

  Hi zensurferboi,
   
  First, we will check if we get error safe mode, start the computer in Safe Mode reboot and press the F8 key for about four to five times. You'll see the Mode without failure listed in the advanced window options, select Safe Mode, and then press ENTER.
   
  Check if the error mode without failure.
   
  If the startup error message does not appear safe mode, I recommend you to place the computer in a clean boot state, and check if the problem occurs in a clean boot state.
   
  To put the computer in a clean boot state, follow these steps:
   
  Perform a clean boot
   
  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
   
  a. log in the computer using an account with administrator rights.
   
  b. click Start , type msconfig.exe in the Start Search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click continue.
   
  c. under the general tab, click Selective startup, and then clear the Load Startup items check box.
  (The box use the Boot file is not available.)
   
  d. on the Services tab, select the hide all Microsoft services check box and then click on disable all.

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
   
  e. click OK, and then click restart.
   
  Once the computer restarts, check if you get the error of starting.
   
  Reset the computer to start as usual
   
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. Click Start , type msconfig.exe in the Start Search box and press ENTER.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click continue.
  3. On the general tab, click the Normal startup option, and then click OK.
  4. When you are prompted to restart the computer, click restart.

  If you don't receive the start-up error message after placing the computer in a clean boot state, follow the steps below in the link to diagnose the program or service that is causing the problem:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista
   
  http://support.Microsoft.com/kb/929135
   
  I hope this information is useful.
   
  Please let us know if you need further assistance.
   
  Concerning
  Rehman - Microsoft Support

• I can't start my pc. Error: Microsoft Mobile Pc presentation adaptability Client has stopped working

  I can't start my pc in Normal Mode, it has a pop up notice (Microsoft Mobile Pc presentation adaptability Client has stopped working), but it starts in Mode without failure. How to find and install this software. PLEASE HELP ME!

  Hi, Tan,

  Try the suggestions of the links given and check if they help:
  http://answers.Microsoft.com/

  http://www.ehow.com/how _

• The model name of my DM9601 To Fast Ethernet adapt is DM9601 to Fast Ethernet Adapterhas has stopped working correctly because a compatible driver is not available for this version of Windows.

  has stopped working properly because a compatible driver is not available for this version of Windows.  This is the error I get and it made my computer unable to re boot. Please help me how to set right.

  Thank youy

  Hello

  you left in the name of material on

  DM9601 USB to Fast Ethernet card; fix?

  and sorry, but I cannot find a driver for him after XP

  you are also posting in the wrong forum

  Try the forum hardware and drivers

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware?page=1&tab=all

  or contact the hardware manufacturer

  they write drivers for their products, not from microsoft

  ______________________________________________________

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• ' DLLhost.exe / COM Surrogate has stopped working "when I change and save the properties of the network adapter

  That's what I usually get

  Version = 1
  EventType = AppHangB1
  EventTime = 130484980926451522
  ReportType = 3
  Consent = 1
  UploadTime = 130484999275764608
  ReportIdentifier = 563046df-ff59-11e3-8bdd-742f68a03d97
  IntegratorReportIdentifier = 563046e0-ff59-11e3-8bdd-742f68a03d97
  Response.BucketId = 685174449
  Response.BucketTable = 5
  Response.Type = 4
  SIG [0]. Name = name of the Application
  SIG [0]. Value = Dllhost.exe
  GIS [1]. Name = Version of the Application
  GIS [1]. Value = 6.1.7600.16385
  GIS [2]. Name = timestamp of the Application
  GIS [2]. Value = 4a5bca54
  GIS [3]. Name = Signature of Hang
  GIS [3]. Value = 0544
  GIS [4]. Name = Type of Hang
  GIS [4]. Value = 0
  DynamicSig [1]. Name = OS Version
  DynamicSig [1]. Value=6.1.7601.2.1.0.256.1
  DynamicSig [2]. Name = locale ID
  DynamicSig [2]. Value = 1033
  DynamicSig [22]. Name = Signature extra Hang 1
  DynamicSig [22]. Value = 05440983ee821818b723a3a237b2dce6
  DynamicSig [23]. Name = Signature Hang extra 2
  DynamicSig [23]. Value = babf
  DynamicSig [24]. Name = Signature Hang extra 3
  DynamicSig [24]. Value = babf43d786a32c16ae0772c4656c1c3a
  DynamicSig [25]. Name = Signature extra Hang 4
  DynamicSig [25]. Value = 0544
  DynamicSig [26]. Name = Signature of additional 5
  DynamicSig [26]. Value = 05440983ee821818b723a3a237b2dce6
  DynamicSig [27]. Name = additional hang Signature 6
  DynamicSig [27]. Value = babf
  DynamicSig [28]. Name = Signature extra Hang 7
  DynamicSig [28]. Value = babf43d786a32c16ae0772c4656c1c3a
  UI [3] = COM Surrogate does not
  UI [4] = If you close the program, you can lose information.
  UI [5] = close the program
  UI [6] = close the program
  UI [7] = close the program
  LoadedModule[0]=C:\Windows\system32\DllHost.exe
  LoadedModule[1]=C:\Windows\SYSTEM32\ntdll.dll
  LoadedModule[2]=C:\Windows\system32\kernel32.dll
  LoadedModule[3]=C:\Windows\system32\KERNELBASE.dll
  LoadedModule[4]=C:\Windows\system32\msvcrt.dll
  LoadedModule[5]=C:\Windows\system32\ole32.dll
  LoadedModule[6]=C:\Windows\system32\GDI32.dll
  LoadedModule[7]=C:\Windows\system32\USER32.dll
  LoadedModule[8]=C:\Windows\system32\LPK.dll
  LoadedModule[9]=C:\Windows\system32\USP10.dll
  LoadedModule[10]=C:\Windows\system32\RPCRT4.dll
  LoadedModule [11] = C:\Windows\system32\IMM32. DLL
  LoadedModule[12]=C:\Windows\system32\MSCTF.dll
  LoadedModule[13]=C:\Windows\system32\CRYPTBASE.dll
  LoadedModule[14]=C:\Windows\system32\CLBCatQ.DLL
  LoadedModule[15]=C:\Windows\system32\ADVAPI32.dll
  LoadedModule[16]=C:\Windows\SYSTEM32\sechost.dll
  LoadedModule[17]=C:\Windows\system32\OLEAUT32.dll
  LoadedModule[18]=C:\Windows\system32\CRYPTSP.dll
  LoadedModule[19]=C:\Windows\system32\rsaenh.dll
  LoadedModule[20]=C:\Windows\system32\RpcRtRemote.dll
  LoadedModule[21]=C:\Windows\System32\netshell.dll
  LoadedModule[22]=C:\Windows\system32\SHELL32.dll
  LoadedModule[23]=C:\Windows\system32\SHLWAPI.dll
  LoadedModule [24] = C:\Windows\System32\IPHLPAPI. DLL
  LoadedModule[25]=C:\Windows\system32\NSI.dll
  LoadedModule [26] = C:\Windows\System32\WINNSI. DLL
  LoadedModule[27]=C:\Windows\System32\nlaapi.dll
  LoadedModule[28]=C:\Windows\WinSxS\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7601.17514_none_fa396087175ac9ac\comctl32.dll
  LoadedModule[29]=C:\Windows\system32\apphelp.dll
  LoadedModule[30]=C:\Windows\system32\netcfgx.dll
  LoadedModule[31]=C:\Windows\system32\SETUPAPI.dll
  LoadedModule[32]=C:\Windows\system32\CFGMGR32.dll
  LoadedModule[33]=C:\Windows\system32\DEVOBJ.dll
  LoadedModule [34] = C:\Windows\system32\devrtl. DLL
  LoadedModule[35]=C:\Windows\system32\dot3ui.dll
  LoadedModule[36]=C:\Windows\system32\dot3api.dll
  LoadedModule [37] = to C:\Windows\system32\ATL. DLL
  LoadedModule[38]=C:\Windows\system32\eappcfg.dll
  LoadedModule[39]=C:\Windows\system32\hnetcfg.dll
  LoadedModule[40]=C:\Windows\system32\slc.dll
  LoadedModule[41]=C:\Windows\system32\GPAPI.dll
  LoadedModule[42]=C:\Windows\system32\USERENV.dll
  LoadedModule[43]=C:\Windows\system32\profapi.dll
  LoadedModule[44]=C:\Windows\system32\wbem\wbemprox.dll
  LoadedModule[45]=C:\Windows\system32\wbemcomn.dll
  LoadedModule[46]=C:\Windows\system32\WS2_32.dll
  LoadedModule[47]=C:\Windows\system32\wbem\wbemsvc.dll
  LoadedModule[48]=C:\Windows\system32\wbem\fastprox.dll
  LoadedModule[49]=C:\Windows\system32\NTDSAPI.dll
  LoadedModule [50] = C:\Windows\system32\dhcpcsvc. DLL
  LoadedModule [51] = C:\Windows\system32\dhcpcsvc6. DLL
  LoadedModule[52]=C:\Windows\system32\UxTheme.dll
  LoadedModule[53]=C:\Windows\system32\oleacc.dll
  LoadedModule[54]=C:\Windows\system32\SPINF.dll
  LoadedModule[55]=C:\Windows\system32\WINTRUST.dll
  LoadedModule[56]=C:\Windows\system32\CRYPT32.dll
  LoadedModule[57]=C:\Windows\system32\MSASN1.dll
  LoadedModule[58]=C:\Windows\system32\VBoxNetFltNobj.dll
  LoadedModule[59]=C:\Windows\system32\ndiscapCfg.dll
  LoadedModule[60]=C:\Windows\system32\rascfg.dll
  LoadedModule[61]=C:\Windows\system32\rtutils.dll
  LoadedModule[62]=C:\Windows\system32\MPRAPI.dll
  LoadedModule[63]=C:\Windows\system32\tcpipcfg.dll
  LoadedModule[64]=C:\Windows\system32\DNSAPI.dll
  State [0]. Key = transport. DoneStage1
  State [0]. Value = 1
  FriendlyEventName = Stopped responding and was closed
  ConsentKey = AppHangXProcB1
  AppName = COM Surrogate
  AppPath=C:\Windows\System32\dllhost.exe
  ReportDescription = a problem caused this program blocking interact with Windows.

  chk axelRB response from the link

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/COM-surrogate-has-stopped-working/1c5f897f-bb99-496b-BC58-ab33fb0cd547

• Thunderbird has stopped working

  Hello

  Count 08/04/2014 Thunderbird has stopped working in my PC somehow. I am running Windows 8.1 Pro x 64. Before that day, everything was ok and Thunderbird was not working. I asked a few friends using Windows 8 and they have the same problem. Thunderbird load e-mail accounts and will not send and receive all of the emails. It won't even add a new e-mail account. This is the message received when you try to add a new account "sorry - we are unable to communicate with our server subscription. Please check your connection. ». If we're going to try to go forward and add a new account anyway the answer will also be that Thunderbird can not connect to any server. We have uninstalled Thunderbird and install several times in the last days without success. I was trying to delete the folder Thunderbird of the t in Program files, but I can't. Uninstall it and install new procedure including the deletion of folder was a solution a few years but it seams that now no longer works.

  Over the last 2 weeks Thunderbird started working only for a few hours and we have the same problem again. I asked about 10 people working with Thunderbird and they have the same problem right now and they have had the same problem during the month.

  Of course I turned off windows firewall and test if Thunderbird will work, but it was not a solution. I am running windows 8.1 Pro x 64. Thunderbird is not on the list of authorized or unauthorized software through the firewall, and I can't find any option to add the Thunderbird to the list to try to resolve the problem.

  I use BitDefender Antivirus and I disabled the BitDefender firewall and the same thing happens. I also disabled the whole antivirus functions after and the same thing. I turned from bot windows firewall and firewall BitDefender or off all BitDefender and the same thing happens. I checked the BitDefender firewall and the Thunderbird has full access.

  Also, I checked the Windows updates. I am not usually accommodate updates in my PC. I remember I have choose to not install Microsoft updates ever. I checked the State and he is near the top is not to install Microsoft updates. I also checked the "update history" and empty status is "you have not tried to install updates on your computer.

  I started windows 8.1 Pro x 64 in safe mode with network and started Thunderbird while windows is in safe mode, and it has the same problem.

  I am trying to add Gmail and AOL accounts in Thunderbird. The emails are all browser set correctly and working well or another e-mail client.

  Today (21/04/2014) Thunderbird has the same problem.

  Any help will be much appreciated.

  Concerning

  Here, you also have the copy of troubleshooting information if necessary.

   Application Basics
  

     Name: Thunderbird
     Version: 24.4.0
     User Agent: Mozilla/5.0 (Windows NT 6.3; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.4.0
     Profile Folder: Show Folder
  

               (Local drive)
     Application Build ID: 20140316131045
     Enabled Plugins: about:plugins
     Build Configuration: about:buildconfig
     Crash Reports: about:crashes
     Memory Use: about:memory
  

   Mail and News Accounts
     account2:
       INCOMING: account2, , (none) Local Folders, plain, passwordCleartext
  

     account4:
       INCOMING: account4, , (imap) imap.googlemail.com:993, SSL, passwordCleartext
       OUTGOING: smtp.googlemail.com:465, SSL, passwordCleartext, true
  

   Extensions
     bdToolbar, 7.0, false, [email protected]
  

   Important Modified Preferences
  

     Name: Value
  

       browser.cache.disk.capacity: 358400
       browser.cache.disk.smart_size.first_run: false
       browser.cache.disk.smart_size.use_old_max: false
       browser.cache.disk.smart_size_cached_value: 358400
       extensions.lastAppVersion: 24.4.0
       font.name.monospace.el: Consolas
       font.name.monospace.tr: Consolas
       font.name.monospace.x-baltic: Consolas
       font.name.monospace.x-central-euro: Consolas
       font.name.monospace.x-cyrillic: Consolas
       font.name.monospace.x-unicode: Consolas
       font.name.monospace.x-western: Consolas
       font.name.sans-serif.el: Calibri
       font.name.sans-serif.tr: Calibri
       font.name.sans-serif.x-baltic: Calibri
       font.name.sans-serif.x-central-euro: Calibri
       font.name.sans-serif.x-cyrillic: Calibri
       font.name.sans-serif.x-unicode: Calibri
       font.name.sans-serif.x-western: Calibri
       font.name.serif.el: Cambria
       font.name.serif.tr: Cambria
       font.name.serif.x-baltic: Cambria
       font.name.serif.x-central-euro: Cambria
       font.name.serif.x-cyrillic: Cambria
       font.name.serif.x-unicode: Cambria
       font.name.serif.x-western: Cambria
       font.size.fixed.el: 14
       font.size.fixed.tr: 14
       font.size.fixed.x-baltic: 14
       font.size.fixed.x-central-euro: 14
       font.size.fixed.x-cyrillic: 14
       font.size.fixed.x-unicode: 14
       font.size.fixed.x-western: 14
       font.size.variable.el: 17
       font.size.variable.tr: 17
       font.size.variable.x-baltic: 17
       font.size.variable.x-central-euro: 17
       font.size.variable.x-cyrillic: 17
       font.size.variable.x-unicode: 17
       font.size.variable.x-western: 17
       mail.openMessageBehavior.version: 1
       mail.winsearch.firstRunDone: true
       mailnews.database.global.datastore.id: 8057ef62-d03a-4da8-a08b-58764ba65fd
       network.cookie.lifetimePolicy: 2
       network.cookie.prefsMigrated: true
       places.database.lastMaintenance: 1397398207
       places.history.expiration.transient_current_max_pages: 104858
       plugin.importedState: true
       privacy.donottrackheader.enabled: true
  

   Graphics
  

       Adapter Description: Intel(R) Iris(TM) Graphics 5100
       Vendor ID: 0x8086
       Device ID: 0x0a2e
       Adapter RAM: Unknown
       Adapter Drivers: igdumdim64 igd10iumd64 igd10iumd64 igdumdim32 igd10iumd32 igd10iumd32
       Driver Version: 10.18.10.3345
       Driver Date: 10-31-2013
       Direct2D Enabled: false
       DirectWrite Enabled: false (6.3.9600.16384)
       ClearType Parameters: ClearType parameters not found
       WebGL Renderer: false
       GPU Accelerated Windows: 0
  

       AzureCanvasBackend: skia
       AzureFallbackCanvasBackend: cairo
       AzureContentBackend: none
  

   JavaScript
  

   Incremental GC: 1
  

   Accessibility
  

     Activated: 0
     Prevent Accessibility: 0
  

   Library Versions
  

       Expected minimum version
       Version in use
  

       NSPR
       4.10.2
       4.10.2
  

       NSS
       3.15.4 Basic ECC
       3.15.4 Basic ECC
  

       NSS Util
       3.15.4
       3.15.4
  

       NSS SSL
       3.15.4 Basic ECC
       3.15.4 Basic ECC
  

       NSS S/MIME
       3.15.4 Basic ECC
       3.15.4 Basic ECC
  

• Qosmio G30 - DVD-ROM drive has stopped working

  I have a Qosmio G30 age of 3 years and the DVD - ROM drive has stopped working.

  He still pulls in, but it will not read or burn discs.

  I received a quote of £360 Toshiba to adapt to a new one that seems generous.

  Anyone know where I could get it fixed cheaper than you?
  Or better yet... anyone know where I can I get it fixed?

  David Hutchinson

  Hello
  This is not an answer to your question but can solve the problem if it is the same that I had.
  In my case, the drive tries to spin but it slips. Only the motor shaft rotates and the drive remains at low revolutions that were not even stationary.
  The problem was caused by the fact that the plastic part (black color) of the mechanism which engages the disc (CD or DVD) slips on the
  motor drive, axle and th couldn't do a full rotation or runs at the specified speed.
  The solution is to delete the article in plastic and put a small amount of super glue on the axle and then put it back.

  Where there is a similar issue, I hope that solve you it like I did.