Adapters and beam forming...

Similar Questions

• X 200 beam forming error

  Hey all.  Here's a strange.  Our group has recently received a bunch of the x 200 tablets for field work and we all get this windows "formation of beams error."  It's very strange.  We all seem to get the error at different points of use no ryhme or reason when it pops up.  Some claim that it is during the passage of the "notebook" to "tablet".  Personally I didn't saw the error shortly after starting upwards in mode "laptop".  We are not yet certain what device is causing the error.

  No one knows what the beam forming called (I think this has something to do with the internal mic...)?

  Y at - it a possible driver update or a patch that could solve this problem?

  
  

• I have adapters and a power converter, but has been told by someone who travels internationally that the block performs the conversion of power for me.  I want to assure that I do not blow on my phone.  Use the power converter to charge my iphone and appl

  I have adapters and converter of power for international travel.  I was told by someone who often visits that the converter is not necessary for apple products.  I don't want to ruin my phone or watch - can I use my power converter?

  If you use the Apple adapter supplied, you will simply need an adapter to use in other countries. The adapter can be used with voltages between 100-240 v AC 50-60 Hz

• Cannot access the internet. Have a bunch of yellow exclamation and question marks on Net work adapters and other drivers__

  Cannot set up internet access. Have yellow question mark points of network adapters and other devices (other drivers)

  Hello

  Maybe this can help, http://www.ezlan.net/faq.html#ghost

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• drivers - cannot update my drivers. My Bluetooth adapters and network are showing yellow triangular exclamation

  I can't update my drivers and my Bluetooth adapters and network show the yellow triangular exclamation that my system didn't come with any drivers that CD so am stuck how do driver for my system model compaq presario cq60

  Hello

  you have given a serial number, NOT a model number

  Go to the HP website and search for your model then find drivers for vista for it

  http://WWW8.HP.com/us/en/support-drivers.html

• SSO ADF and Oracle Forms?

  Hello

  Is there a recommended way to share authentication between ADF and Oracle forms?

  We currently use Oracle 11 g 2 forms and we have our forms developed in-house running on this.  I would like to start working on some applications of the ADF, but I do not know how to ensure that the username and passwords are the same for our existing forms applications and any new request to ADF we add.

  I would use JDeveloper 12 c.

  We have < 100 users, so this isn't a large installation, and most users are (same office).

  Thanks for ideas or advice.

  Check out this blog https://blogs.oracle.com/olaf/entry/ofm_11g_oam_sso_for_forms_and because it describes how using OAM.

  Timo

• I bought cs 5.5 of Austria and the form to get my serial number does not recognize my product number. What should I do?

  I bought cs 5.5 of Austria and the form to get my serial number does not recognize my product number. What should I do?

  Since CS5.5 is no longer sold by Adobe, CS6 and a cloud subscription, just where have you bought?

  Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

  - and https://forums.adobe.com/thread/1572504

• Is it possible to create a standard form which can be sent by email to anyone and once filled by the receiver, have a button that clicks on the receiver and the form is encrypted and attached it would open up an email to the sender and a built-in admin pa

  Is it possible to create a standard form which can be sent by email to anyone and once filled by the receiver, have a button that clicks on the receiver and the form is encrypted and attached to an e-mail to the sender and a built-in admin password it open?

  Hello Graphicsguy123,

  You can get the workflow above using the Widget feature. Here is the link for reference:

  https://helpx.Adobe.com/document-cloud/help/create-widgets.html

  -Usman

• I accidentally hit the wrong command on my key board and now forms are white and black outlines. How can I change the forms to their original colors?

  I accidentally hit the wrong command on my key board and now forms are white and black outlines. How can I change the forms to their original colors? (I do not change the color of shapes, I think that I just changed it in some weird setting)

  Figured it out! It was in 'outline' mode I went to view > preview and are back to normal.

  How can Illustrator Adobe - I get out of the preview display? -Graphic design change battery

• How to make a form with report and a form of inclusion in the same page?

  Hey, guys:
  
  I was wondering if you could have any link or examples to show how to make a form with report and a form of inclusion in the same page, these two forms are related to the same table. Our customer wants that a user can add a new row to the table in a form and see all lines created by this user in a report, the report should provide link change as well. the problem is: whenever I inserted a new line or change a line or delete a line, and submitted and return to this page, all hidden elements lost their values, this report is empty, and some display only items also lost their values. Could someone give me any suggestions?
  
  Thank you very much!
  
  Sam

  So, the problem is essentially with page elements lose their session state values when re-loading of the page. How do you define values for the elements of the hidden page? You have default values defined for those? They are based on the database column? What is the "Source" parameter for these items on the page? It is set to "Always, replace any value in session state"? You have any process of 'Empty the Cache', which is reset these values to null element?

  What is your version of the Apex?

  I would recommend that you have installed for example in apex.oracle.com. This would help to better understand the issue.

  Published by: jaouad khalifi on 13 December 2012 22:11

• Advice on how best to configure the network adapters and virtual switch in ESX host

  I'm new to VMware and am its implementation.  I got my training a few weeks ago, and now I'm configing my hosts.  I have 3 guests, each have 2 network cards.  There is a virtual switch that ESX creates when it is installed (vSwtich0).  The books said that it is advisable to delete the VM network port of virtual machine that is assigned to the value group default virtual switch and put it on another virtual switch so that you keep your management network separated from the network of the vm for performance and security.  If I do this, all my virtual machines will have to go to 1 NIC b/c I only have 2 NICs per host.  I thought that I have just to keep all my groups of ports on the default vSwitch0 and add my second NETWORK adapter so that I can take advantage of the Association of NICs for redundancy and load balancing.  However, I'm not sure on the performance and the security risks.  Do you have any ideas or advice?  I could also create two virtual switches and put my virtual machines on one which would have a NETWORK card dedicated and put my service and Kernal VM console on another virtual switch with a dedicated network card.  However, in this scenario, I have no fault tolerance or load balancing.  We are a small shop and we have about 10-15 VMs on each host.  I don't have access to b/c distributed switching we paid only for the company (not more).  Thank you.

  Hi and welcome to the forums,

  With 10-15 VMs per box and I guess that I would seriously consider adding two extra cards for each host in the production machines. You could then do something like:

  vSwitch0 - vmnic0, vmnic2, vmnic3 - Console of Service, VM LAN network

  vSwitch1 - vmnic1 - VMkernel

  That would give you redundancy and performance to access your hosts (SC) and also for all your virtual machines. The VMkernel would get a NETWORK card dedicated for vMotion and could be on a separate network. He didn't need redundancy really as if the NIC sank the only issue is that you cannot vmotion virtual machines. In this case you would just move one of the NIC workgroup through to those switches manually.

  If you only have 2 network cards, then I would say having a vSwitch with two attached network adapters and VLAN the VMkernel may be off. I want absolutely to the redundancy of having two cards together.

  Hope this helps,

  Dan

• How to convert non-fillable forms in Word and PDF forms to fill out?

  Hai,

  How to convert non-fillable forms in Word and PDF forms to fill out?

  Hi Mahalcs

  Please check the link for the reference below: http://www.adobe.com/in/products/acrobat/convert-existing-forms-to-fillable-pdfs.html

  See also, http://www.adobe.com/content/dam/Adobe/en/products/acrobat/pdfs/adobe-acrobat-xi-convert-f ORM you in fillable pdf - tutorial_ue.pdf

• How to change data objects and update the corresponding task and task forms?

  Hi all
  
  I modified this thread because I found that I had many questions to ask.
  
  1.
  I'm quite new to OBPM and would like to know how to change data - for clarity objects add a new attribute "Dependents of the Client" "Customer care" - and therefore update the task that uses the 'customer information' what makes via data binding - I get an error message here - or via the data about the data Task-The chosen tab it does not appear to be linked to my approach in some sort.
  
  2.
  Will be the task form that I generated earlier in < 1 > update automatically? Is it possible to update manually if the task has been clearly customized?
  
  3.
  What are the objects of project data? They do not store values in my process. They are for the arguments only - like reusable process?
  
  Thanks in advance,
  
  Kind regards
  
  Yanis

  Hi Yanius,

  (1) assume that you start from scratch. First, you declare your data object structure. To do this, you must go to the BPM project Naviagtor, right-click on 'Catalogue of trades' and create a new Module. Then you can right click on the module you created and select the new object of trade. Add all the attributes you need. It is the same to declare a class in Java. Second, you must declare a variable of the type process you have created: select the process, go to the Structure display (if you don't go and activate it in menu view Jdev-> Structure). Right click on the Process data object and create your variable. It's like setting a variable in Java. In short, answering your question, make the path opposite: find in your process of type "Customer Details", then go to your catalog Business, right click and change the definition to add what you need.

  (2) the human task will not update automatically (annoying). If you change the object itself, so you don't need to change your mappings because actually there the same object you are through the task as in / out argument. There are two things here: the human task and form associated with it (where probably change you the subject i.e. customer details). Go to the form (.jspx) - click on the tab links (by default, you are in the Design). In the links page, there is a link on top: "Page Définition File" (something like proj/pageDef/...xml). Open the XML file and go to the source. There you can add manually now all the attributes you need and that were not available before (i.e. dependent Client). It's a little complicated, but at least you don't have to recreate it. particularly useful if you have already implemented and subsequently form, you need to add more things (business is very good to say otherwise, "I would like to see something else in the form" ;)

  (3) project data objects are visible by all processes that you have in the project rather than the object of process data that are visible only to the method where you set the variable to. This means that you declare an object of data of the project once and then it will be available to all processes. Keep in mind that each process has a copy of it. In other words, it is not like a global variable that everyone sees. If edit you in a single process, other processes will not see the new value.

  I hope that I have answered your questions.
  See you soon,.
  Felipe

• Different LOVs of af: query and af:form for the same attribute of VO

  Hello
  
  We need show different LOVs af:query and af:form for the same attribute in VO.
  
  Is it possible to use LOV Switcher for this?
  
  Can how we use in the LOV Switcher attribute to check if she is seen Critearia line or VO?

  Please see this post - http://jobinesh.blogspot.com/2011/04/identifying-request-for-lov-from-search.html

• Difference between a Web application and a form online?

  I create a page that allows users to download images and their description, I want to know what should be used in this case thus specifying the difference.

  Hello.

  Regarding the compariosn a web app and web form are totally different things.

  A web form is a form that you can build to connect the person and all custom data information that you create in the Business Catalyst CRM. The person is created if new or existing information of this form attached to this person. The information on this form is stored in a case agaisnt this person. Web Forms can be used to sign people to secure the areas, set people like wholesalers, place them on a list of campaign, fill out the custom CRM and more.

  A web application is a custom web application. If you want to build something of a list of the information that has a detailed page of this House, to the testimonies of what you want. With the release of the layout options and custom fields, you can create you can build all sorts of things. Know something like jQuery very well and you can build some really cool things.

  It is a way out of a large number of data elements would highlight.

  A web application also has the ability for users to add items and edit items associated with them, IF you configure these features of the web application when you create recorded. A public profile for example this person can change or submit.

  Information created as web app items are not part of CRM, if you mentioned users uplading images and a description, element of web app information, it is not stored agaisnt the person in the CRM.