Add a new instance to the NON-RAC database?

Similar Questions

• Add a new instance to the top of the next page

  I created a dynamic form of the fluid (a daily report of workers to fill form), which is likely (based on user input) to span several pages. I added a button 'Add a new day' at the bottom of the form, which, as it says, add another day to the shape. However, I can't do the new instance in him to move to the next page, it's just created immediately after the previous instance.

  I tried all the suggestions of other threads to help, but I still can't make it work. The form creates a blank page that I didn't need, or he continues to add the new instance just below the other.

  Any help would be greatly appreciated.

  Hmm,

  This is the script of the conditional jump. Try thi sapproach: https://acrobat.com/#d= * 2f7axX-JHCdLi * SH * pO2Q.

  Niall

• Record of. PDF with repeatable subforms adds a new Instance.

  Hey everybody,

  I have worked with dynamic forms LiveCycle Desinger for a few years now, and this is the first time I see this kind of behavior.

  I have a very big form in LiveCycle Designer. There or 50 subform repeatable sections. I save the designer, and then open it in Adobe Acrobat X Pro. Acrobat Pro, whenever I have re-record it then re-open, a new instance is added to each subform repeatable.

  If I fill it, save it, and then reopen it, he has all my info, as well as a subfrom empty additional below each section.

  I have no formcalc in the presave, nor do I have any global fields in my form... In addition, each single repeatable subform named. I am at a loss.

  I have a sample of this pdf here. If you have a different file hosting site you prefer, do let me know.

  I'd appreciate any help anyone could offer. I don't know what is the cause.

  -Scott

  Hello again everyone,

  I found the answer to my problem. I had a devil of a time from Googling the problem, so I'll put some sentences that I tried below, where like-minded individuals has a similar problem.

  The main problem was with data binding. I had left the data binding for all as the default 'using the name (...) '. I was under the impression that as long as the sibling elements have been appointed to the same thing, there is a conflict. I was wrong.

  In my form, I used static subforms to organize the fields available in a dynamic repeatable subform. The static subform called "sf_positioning". It happens that this field has an uncle named the same thing. It was close enough to provoke a conflict, making the repeatable subform record an additional instance whenever the data has been saved. This can be corrected in one of two directions... ((1) set one of the subforms wrongful use "no data binding" (use this only if the content of the subform is not be exported or merged) or 2) give the subforms of unique names.

  I need to look if everything must be particularly well appointed... As I said, it makes more sense to me that the only restriction should have been on the sibling elements, but I will in the future to make sure there are at least three degrees of separation between just like named controls/subforms.

  Hope that helps someone else...

  And what follows is some of my attempts at Googling the problem. I hope that this will facilitate the solution to find for others:

  -Player which extends shape Dynamics breeze repeating subforms.

  -Economy adds a new instance of the repeatable subform.

  -Whenever I save, I get more empty instances of a subform repeatable.

  -Repeatable subforms not working does not go as planned.

• How to refresh a screen without making a new Instance of the class

  Hi all

  Please help me.

  I need to refresh a screen of components such as the text box, list etc without (pushing the new instance of the class) using the old instance.

  I use:

  UiApplication.getUiApplication () .invokeAndWait (new Runnable() {}

  public void run() {}

  invalidate ();

  }

  But it will not refresh the screen components.

  I need to change the label of the text box, choice of etc group on click on the Refresh button.

  Please suggest me

  Thank you

  Again, I agree with BBDeveloper, just wanted to add an alternative solution.  You must have the code that sets the values in those fields anyway.  You can separate the code that adds the fields to the screen of the code which sets the values in these fields, place the code that sets the fields into a separate routine and call this routine to during the construction of the screen and the screen refresh.

• Re-evaluate the relationships after adding a new instance of the entity

  Hi all

  I have an 'X' entity for which global > X 1:M relations are evaluated on the screens. For example, after we collect the instances of 'X', the next screen ask you, out of all the X, which is a member of the relationship there. The interview continues.

  The question we now face is that if the user decides to add an additional instance of 'X' after having answered the relationship screen, screen relationship there does not appear once more.

  Ideally, we would like this screen once more, now that the extra 'X' was added, since it is theoretically 'unknown', they are also in the relationship Y or not. Instead, the debugger shows the relationship there is known and empty for the new 'X' entity instance.

  Is it possible to have this screen once more, once the new instance of the entity?

  Thanks for your help,

  -Julien

  Julien,

  The solution for this is not quite easy. Once the relationship is known to 'Y', the screen will be visited not unless the user chooses explicitly (usually data review screen).

  Event Manager solution

  A solution is to implement an event handler that sets the relationship 'Y' Unknown when the user adds a new 'X' entity. This requires custom code. See 'Events and event handlers' in the Guide of the developer of automation Oracle policy

  The entity implied solution

  Another (perhaps easier) solution is to infer the relationship 'Y' and collect information on the same screen that 'X' entities are added. This is best illustrated by an example.

  For the entity 'X', I'll use "person" global to the containment relationship no one is 'the people '.

  For relationship 'Y' I will use the global relationship person '' the special people. ''

  On the person entity, I have 2 attributes "name of person" (text) and 'the person is special' (Boolean)

  I have the following rule to infer the relationship '' the special people. ''

  the person is a member of the special people if

  the person is special

  The next step is to ensure that when you add features of person, they state "name of person" and "person is special."

  It will have 2 effects:

  1. the relationship "the special people" will be deducted, that there will be no screen to associate the relationship.

  2. for the collection of instances of the person, the extraordinary selection (or not) will determine members

  I think that the solution infers entity could be your best option. It requires no code and simplifies the interview.

  Hope this helps

  See you soon

  Frank

• Search for a value in a field in a subform before allowing a user to add a new Instance

  Configuration of the form:

  Name of the page = page 1

  1 subform in Page1 = Info (fixed to slur)

  Objects in the subform Info: name (textfield) and Email (textfield)

  I also have a 2nd subform within Page 1, which contains a button instance add

  What I'm doing:

  
  

  1. the user must enter their name and E-mail address, then click 'Add a button to the Instance' to create a new instance of the subform Info : _Info.addInstance (1);

  2. If the user does not enter an e-mail address, I want there to be a message box this info the user address of e-mail is required before, he or she can create a new instance. Note: would be nice if the slider is set to foucs on the email in this particular instance of subform field.

  3. as long as the user tries to add an instance, he or she will be refused if they are not an email in this case

  4. If the user has an e-mail address in this instance, then the script will create adds a new instance

  5. the process should continue in this way for each, each instance button click Add

  I presume that it nees to be a loop and perhaps a scipt for somExpression, but I'm not sure.

  Here's what I have so far (see below)... The script works for the first instance on the page, but this does not prevent instances to be created when the email in the 'current' instance field is empty. I want to prevent the user to add new instances if the email field is balnk in this "current instance. So, I guess I don't know how ot test a field in the current instance in a repeating subform.

  var VNAME = Info.somExpression + ".email";

  var vEmail = xfa.resolveNode (VNAME) .rawValue;

  if (vEmail == null)

  {

  xfa.host.messageBox ("Please enter an email address.");

  }

  else {

  Form._info.addInstance (1);

  var i = Form._Info.count 1;

  xfa.host.setFocus (xfa.resolveNode ("Info [" + i + "].")) Name')); This set is the focus of the cursor in the name field in the newly created subform

  }

  Please advise and thanks in advance!

  Hello

  Try something like;

  var lastRow = Form.resolveNode ("Info [" +(_Info.count-1) + "]"); Get the last row

  If (lastRow.Email.isNull) / / if the email field empty

  {

  xfa.host.messageBox ("Please enter an email address.");

  }

  on the other

  {

  newRow var = _Info.addInstance ();

  xfa.host.setFocus (newRow.Name.somExpression); set the focus to the field name on the line has been added

  }

  Concerning

  Bruce

• Copy to the new instance of the subform

  What I'm trying to do is to copy a field and when a new instance of a subform is created to another field.

  When a user clicks the show button, the button to show opens a new instance of the form.  I need the sent field to fill in the field of criticism on the new instance.  Is this possible?

  

  Hello

  Here is an example:

  https://Acrobat.com/#d=HD6XJ1qofZDf713Yq1P43g

  The first example simply sets the value of the drop-down list. The second adds an element to the drop of the examiner, as sending drop-down list allows the custom entry.

  I've been lazy even if, as the script should check first of all the duplicates. I'll try and get back to that.

  Hope that helps,

  Niall

  Ensure the dynamics

• Open with options: I want to add a new application to the list right click on file-> open with and rearrange the list so my search app is first. I know that I can use open with-> other and select any application, but it takes too much time since I u

  I want to add a new application to the list right click on file-> open with

  and also reorder the list so my search app is first / top of the list.

  I know that I can use open with-> other and select any application, but it takes too long I should use my intended application in this way several times a day.

  Basically, I'm looking for a configurable way configure open with, something more to send to Windows.

  Thank you very much for all the advice offered.

  The operating system, not you, not control that open with the menu command.

• When I add a new event to the calendar, what I type is 'New event' when I press return. Why?

  When I add a new event to the calendar, I type the name of the event in the field, change the time, add notes, etc. When I press return, the new event indicates briefly on the calendar as what I typed, but most of the time, it is up to 'new event '. I tried to change my sequence of this type I and sometimes validate instead of return, but it doesn't seem to be a reason for this behavior. Also, it happens all the time, just most of the time.

  It's extremely frustrating because if I don't notice it right away, I don't know what was the event.

  Any suggestions?

  I use OS X, 10.9.5.

  Maybe this will help.

  Calendar may not enter the new event.

  Calendar may not enter the new event (2)

• I have a corrupt user profile. Windows XP. When I add a new can be the same, or should be different. And the user's profile should match the user ID?

  Corrupted user profile

  I have a corrupt user profile.  Windows XP. When I add a new can be the same, or should be different.  And the user's profile should match the user ID?

  If the profile has recently become corrupted, you can probably get the same user by performing a system restore operation:

  "Windows XP problems if your profile is corrupted"
    <>http://support.Microsoft.com/kb/326688 >

  Otherwise, you will need to create another user and copy your data.  The simplest procedure is here:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  HTH,
  JW

• How can I add a new site under the heading 'Favorites '?

  How can I add a new site under the heading 'Favorites '?

  See: https://www.winhelp.us/internet-explorer-11-favorites.html

  He will explain

• What is wrong with this sequence, it does not work when, after 3 inserts, I add a new record with the trigger it gives an error.

  Mr President.

  What is wrong with this sequence, it does not work when, after 3 inserts, I add a new record with the trigger it gives an error.

  --SL_CUSTOMERS table data
  
  
  INSERT INTO SL_CUSTOMERS VALUES(1,'Kamrul Hasan',NULL,NULL,'Moghbazar', 'Dhaka','0456789123',NULL,NULL,NULL,'Y',NULL);
  INSERT INTO SL_CUSTOMERS VALUES(2,'Rabiul Alam',NULL,NULL,'Motijheel', 'Dhaka','0567891234',NULL,NULL,NULL,'Y',NULL);
  INSERT INTO SL_CUSTOMERS VALUES(3,'Shahed Hasan',NULL,NULL,'2-G/1,2-2,Mirpur', 'Dhaka','0678912345',NULL,NULL,NULL,'Y',NULL);
  
  
  
  

  CREATE SEQUENCE  "ALIZA"."SL_CUSTOMERS_SEQ"  MINVALUE 1 MAXVALUE 9999999999999999999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER  NOCYCLE ;
  
  
  CREATE OR REPLACE TRIGGER SL_CUSTOMERS_TRG 
  BEFORE INSERT ON "ALIZA"."SL_CUSTOMERS"   
  FOR EACH ROW   
  BEGIN   
  IF :NEW.CUSTOMER_ID IS NULL OR :NEW.CUSTOMER_ID < 0 THEN  
    SELECT SL_CUSTOMERS_SEQ.nextval   
      INTO :NEW.CUSTOMER_ID  
      FROM DUAL;   
    END IF;   
  END;   
  /
  
  
  
  

  When I try to insert several records with the seq.nextval it gives error

  violation of primary key.

  INSERT INTO "ALIZA"."SL_CUSTOMERS" (CUSTOMER_NAME) VALUES ('sdfsd')
  ORA-00001: unique constraint (ALIZA.SL_CUSTOMERS_PK) violated
  ORA-06512: at line 1
  
  
  
  
  One error saving changes to table "ALIZA"."SL_CUSTOMERS":
  Row 4: ORA-00001: unique constraint (ALIZA.SL_CUSTOMERS_PK) violated
  ORA-06512: at line 1
  
  
  
  
  
  
  
  

  Concerning

  Mr President.

  I find the solution by creating a function before the triiger

  as below

  CREATE SEQUENCE  "ALIZA"."SL_CUSTOMERS_SEQ"  MINVALUE 1 MAXVALUE 9999999999999999999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER  NOCYCLE ;
  
  CREATE OR REPLACE FUNCTION get_SL_CUSTOMERS_vId RETURN VARCHAR2 AS
  BEGIN
     RETURN SL_CUSTOMERS_SEQ.NEXTVAL;
  
  END;
  /
  
  CREATE OR REPLACE TRIGGER SL_CUSTOMERS_TRG
  BEFORE INSERT ON "ALIZA"."SL_CUSTOMERS"
  FOR EACH ROW
  DECLARE
  dummy VARCHAR2(200);
  BEGIN
    dummy := get_SL_CUSTOMERS_vId();
    :NEW.CUSTOMER_ID := dummy;
  END;
  /  
  

  It works very well

  Thank you all for the suggestions.

  Concerning

• IOM 11.1.2.2 - new instance of the application is not visible in the catalogue

  Hi all

  I installed the Oracle Fusion Middleware Identity Management 11g R2 Media Pack v8 - 11.1.2.2...  When I created the new instance of the application, I don't see this case in the catalog. I found a similar question in the Metalink (Doc ID 1624482.1), but a workaround described it does not work for me. Workaround does not work for me is: the value "Update Date" in 'Task catalog synchronization' last value and run the job again.

  In the version 11.1.2.1 it woks fine.

  Please, can someone help me solve this problem?

  Thank you.

  Milan

  Hi all

  my colleague and I, we found a solution.

  Looks like the Sun Java System Directory Connector is not supported in the version 11.1.2.2 IOM or the bug is there. I thing it's a bug! IOM 11.1.2.2 uses more SQL select / insert when catalog synchronization task.

  INSERT INTO CATALOG (CATALOG_ID, ENTITY_TYPE, CATEGORY, CATALOG_CREATEBY, CATALOG_UPDATEBY,

  ENTITY_KEY, ENTITY_NAME, ENTITY_DISPLAY_NAME, ENTITY_DESCRIPTION, PARENT_ENTITY_TYPE, PARENT_ENTITY_KEY, IS_DELETED,

  TAGS, CERTIFIABLE, ITEM_RISK, RISK_UPDATE_DATE)

  SELECT - CATALOG_SEQ. NEXTVAL,

  "ApplicationInstance', 'ApplicationInstance', 4, 4,

  APP_INSTANCE_KEY, APP_INSTANCE_NAME, APP_INSTANCE_DISPLAY_NAME, APP_INSTANCE_DESCRIPTION, nvl2(APP_INSTANCE_PARENT_KEY,'ApplicationInstance',null), APP_INSTANCE_PARENT_KEY, APP_INSTANCE_IS_SOFT_DELETE,

  APP_INSTANCE_NAME | ' ' || APP_INSTANCE_TYPE | ' ' || APP_INSTANCE_DISPLAY_NAME | ' ' || SVR. SVR_NAME | ' ' || OBJ. OBJ_NAME, 1, 3, sysdate

  OF APP_INSTANCE, OBJ, SVR

  WHERE THERE is NO 1 = 1-(SELECT 1 OF THE CATALOGUE WHERE ENTITY_TYPE = "ApplicationInstance" AND CATALOG. ENTITY_KEY = APP_INSTANCE. APP_INSTANCE_KEY)

  AND APP_INSTANCE. ITRESOURCE_KEY = SVR. SVR_KEY

  AND APP_INSTANCE. OBJECT_KEY = OBJ. OBJ_KEY AND OBJ. OBJ_TRUSTED_SOURCE = '0' AND APP_INSTANCE_KEY =: 1

  The problem is that the object (object type?) of the connector SJSD has the value OBJ_TRUSTED_SOURCE in the table OBJ is NULL but query catalog synchronization expected value 0 or 1.

  And the solution?

  The value of 0 OBJ_TRUSTED_SOURCE. Example: update obj_trusted_source set obj is '0' where obj_key = 5;.

  But we found that supported Oracle Internet Directory 11.1.1.6.0 multiple LDAP servers such as eDirectory or Oracle Directory Server Enterprise Edition. Then I abolished SJSD connector and its application instance and installed OID connector

• Restoring a backup RMAN to a new instance of the database

  Hi guys,.

  I have a problem with restoring a backup RMAN I have with me a new instance of the database. I have with me are:

  1. backup of the SPFile. (O1_MF_NCNNF_CTLFILE_BU_92DVGYO2_. BKP)

  2. backup of the control file (O1_MF_NNSNF_SPFILE_BU_92DVGW9H_. BKP)

  3. the full backup (O1_MF_NNSNF_FULLPROD_BU_92DVGW9H_. BKP)

  I received these files to a client environment and I need to restore these to a new instance of the database on a local computer. I gave an attempt as follows (in Oracle 10 g):

  1, creates a new instance of the (Test75) database using the Oracle Database Configuration Assistant

  2 SET ORACLE_SID = Test75

  3 connection to this instance with RMAN

  4 tried to restore the SPFILE from the BKP file received.

  
  

  I make mistakes and cannot continue. I don't know if I will carry out the correct steps. Please help me telling me how I should achieve this goal.

  
  

  Thank you.
  

  1. backup of the SPFile. (O1_MF_NCNNF_CTLFILE_BU_92DVGYO2_. BKP)

  2 backup of control file (O1_MF_NNSNF_SPFILE_BU_92DVGW9H_. BKP)

  The first backuppiece resembles a ControlFile and the other looks like a SPFILE'

  > I get error and cannot continue

  What is the error?  (I assume that you have tried to restore the O1_MF_NNSNF_SPFILE_BU_92DVGW9H_ SPFILE. BKP

  Note that you must also SET the DBID before restoring the controlfile

  Hemant K Collette

• Cannot add a new Place in the Version 13 of the first multimedia elements

  Hello

  I use the trial version of the first elements Organizer, which I plan to purchase if I can get this problem resolved.  When I click on 'Add locations' button at the bottom of the screen AND when I click on the Green over the button "Add a new place" at the scene of the altarpiece program Barbadori crashes and I get the message "program not responding" Windows 8.1.  I clicked "Wait for the program to respond" and waited more than 5 minutes and nothing happens.

  This does not happen to the Photoshop elements Organizer; However, all I need is the organizer and the video editing so I spent with elements of Prime Minister.

  Thank you

  Andrea

  Please do not take into account.  I rebooted and installed the updates of Windows and it seems to work fine now.

  Thank you

  Andrea