Add devices...

Similar Questions

• I am trying to add my Linux netbook to my sync account, but both my windows computers will not display the "Add Device" button in one of the sync management screens

  I'm trying a new version of Linux on a net book I use to play with non windows OS. In the process of setting up the new OS install I wanted to make my Firefox account set up so that I didn't have to spend a lot of time working on something. I'm no stranger to sync of browser and several of my computers and tablets with a number of different OS tied to the account with little difficulty in including the Firefox of the previous generation of Linux that has been on the net accountant. The problem is now that on both my computers in the main, a windows 7 and a desktop tablet windows 8.1, both running the latest Firefox, I am unable to find the 'Add a device' button in the synchronization of the management screens. This includes browsers built in display options as well as the Firefox manage account page. The first gives me options to disconnect the account, go to the maintenance screen, several checkboxes that you can synchronize to the device name. The management, after the login screen, don't give me options for the disconnect, change password and delete the account. Any help to understand why the add device button seems to be missing from these two devices would be greatly appreciated.

  Please check the version of your Installation of Firefox. (can be found by clicking on the main menu, or by clicking or hovering the cursor over the help button, and then click about firefox in the submenu). According to since how long you configured synchronization you can still use the old version of sync. Firefox 29 has introduced a new (and I would add a lot less tedious) version of sync. See this Mozilla support article for more information on the upgrade of your sync to the new version.

• Add Device sees wireless but printer is plugged and can reach the HTTP page on wire

  I installed my new 8000 Officejet Pro A809 with an ethernet but when I run the Wizard "Add Device" of HP, it trys to install as wireless even though I select wired and the installation fails.

  I can see the page http for the printer and it presents information healthy of mind on my printer, so I think that ethernet is currently working.

  I am running Windows XP with the FW off. The printer is on the same switch as my PC & of course, I can see the http page

  In the wizard, even if I choose ' Wired ' of course the wire works, page "Found network printers" shows that the connection is wireless. None-the-less I click next then a screen appears for "from Network Services" & it rolls well, topology, wireless services, etc., and sending a SLP request the IP address it fails & shows a picture of a wireless signal and a big red X.

  HP Home Network Diagnostic Utility says that software to connect to the network printer is missing, BUT I ran the wizard completely if a second time, I chose my camera wasn't online and it ended up OK. I ran the UPDATE of the utility & he did an update to security; I have rand again and he found none.

  Although my FW is off, I checked the ports that the FW Guide are necessary:

  I can telenet to the printer on port 9100 & 92200

  I can not telnet on port 137 139 or 427

  Ideas?
  Thank you!

  Larry Holt

  OK, plug the printer Ethernet cable must turn off wireless radio printer, but in the cases where it does not, click the button to light blue (or go to settings > network > turn off wireless on the front panel).

  Now, you don't have to bother with the add devices Wizard, we will just add it manually:

  Verify that you can access the web page internal to the printer by its IP address.  If you can not, disable firewall for your security system (not the Windows Firewall, it is usually not in the way).

  1. click on the 'Start' button--> printers and fax machines.
  2. under print jobs, click on "add a printer".
  3. click on 'Next' on the Add Printer Wizard window.
  4. Select "local printer attached to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
  5 under, select a Printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
  6. in the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is turned on and connected to the same network that your computer is connected to. click on the button "next".
  7. under "Add Standard TCP/IP Printer Port" enter the IP address of the printer. Click 'Next' and then click 'Finish '.
  8. now select HP in the manufacturers list, select your printer in the list of the models of printers and click the button "next".
  9. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
  10. Add the name of print spooler, and then click "next".
  11. click on "next".
  12. click on "Next" and "Finish."

• Can I still sync/add devices using FireFox 30 (including iCHOOSE to use...) and, if so, how/where can I do so (because by clicking 'Sync' @toolbar does NOTHING)?

  Hey guys, can I still add/sync the devices by using FireFox 30 (including iCHOOSE to use...) and, if so, how/where can I do so (because by clicking the sub-title of the menu "Synchronize" FireFox both the toolbar of the browser "icon to sync" icon NOTHING [other that cause the icon toolbar synchronization annoyingly turn for a fraction of a second before you do anything else...])?

  Wow - my computer's clock is very well so I was personally puzzled by the sudden 2033 journal dates too but yes, I will simply record punctually (speaking of that thanks for your) and export my bookmarks to Safari so that iCan go via my iPhone - Bye mozilla. @P_C_T

• Can I still sync/add devices using FireFox 30 and, if so, how/where?

  Can I still add/sync devices using FireFox 30 and, if so, how/where can I do then?

  Everything is fine on my end, but FireFox issues I discovered leave me no other choice than to save on time (speaking of that thanks for your) and place you in Safari so that iCan access Favorites via my iPhone - Bye mozilla. @P_C_T

• ACER ASPIRE E5-511-ADD DEVICE USING THE UEFI BOOT.

  Hello. I bought a laptop Acer Aspire with Linux preinstalled E5-511. I want to install windows 8.1.

  I created with Rufus TPG bootable USB flash with win8.1 image. UEFI mode the laptop does not recognize the USB, I have turned off secure boot, put the USB - HDD on the top of the boot priority but in vain.

  In legacy BIOS mode, I can boot and install windows, but the touchpad mouse does not work, only the USB mouse functions.

  How can I add UEFI boot USB flash?

  Thank you in advance.

  You did right, but sometimes the USB interfaces are not recognized by the system, I had some problems with a pair of USB pen which has not worked as a boot device, but another one worked smoothly.

  don't forget to have your HDD or USB pen in FAT32.

• How to find the "add device" in Firefox Sync on my PC in order to add the Firefox iPhone?

  Try to synchronize my Firefox application on a new iPhone7, I arrived at the stage where it says 'a comptter of Firefox Sync-connected, go to the synchronization options and select 'Add a device'. I can't find the Synchronization Options and adding a device on my 10 Firefox PC Windows version.

  These instructions could be two years old now. Please try "Part 2" in the following article (part 1 is for people who have never created a Firefox account):

  Synchronize your bookmarks Firefox and browsing history in iOS

  Does it work?

• Cannot add devices usb ESXi 4.1.0

  I have 3 servers of comments on a 4.1.0 ESXi host 260247. These 3 servers require each license key usb (two sentinel superpro to safenet Rainbow and a rainbow ultrapro)

  I had 2 of them related to 2 servers, but when I tried to add the third argument, it did not work. the usb device did not just stay on the settings page of the virtual machine when I closed and reopened it.

  So I restarted the services (restart of service.sh I think?) and now all 3 of my usb dongles can not be bound to a host. They remain in bold in the list with an indication that they will be added, I close the window, see in the task of the latter that the task is complete, re - open settings and no usb device!

  What could cause this? You guys ever seen this before?

  you have 3 USB devices attached to 3 ESXi hosts?  Although below is not you exactly the problem, it will help deteriming if you are set up correctly.

  http://www.NTpro.nl/blog/archives/1551-what-about-VMotion-and-USB-device-pass-through.html

• Add devices to iTunes Developer (updated certificate MP)

  Hi all again, I add some features to developer login page iTunes client.

  Now - I have to update his published (from V26 to V30) application, please confirm that I have just rebuild (or edit and update?) the developer certificate mobile available? No other, is this correct?

  Thank you very much!

  You must edit the file of mobile provision and very sure that you check the small box next to each device that you have added. Save the new .mobileprovision on your machine, then re-upload the app the App Builder, specifying the .mobileprovision file.

  It's really easy to Miss setting the box next to these new components when you change the mobileprovision file!

  Neil

• Portege 2000: How to add device in Device Manager base system?

  Hello

  I'm trying to implement the SD card reader on my Portege 2000 running the Windows XP operating system.

  I downloaded and installed the common modules and my BIOS has not updated.

  I downloaded the SD host controller driver, but can't install it because I have no base system device manager for devices by reading me.

  How do I get this so I can allow my SD card reader?

  Thank you, happy new year

  Becky

  Hello

  Base system device is usually the SD card controller. If you just install it should correct the problem.
  SD host controller driver should be installed first. After the SD host controller driver is installed, you can install the SD memory card driver. The driver can be installed as follows:

  SD host controller driver,
  1. from the [start] menu, select [Settings], then click [Control Panel].
  2. double-click [System], and select the [Hardware] tab.
  3. click on [Device Manager].
  4. double-click on [device Base System].
  5. Select the [driver] tab and click [set to update driver].
  6. click [next] and select [display a list of drivers that are known...].
  7. click [next] and select [ECS] in [hardware types].
  8. click on the [disc] button.
  9 locate the folder "{CD player}: Windows XP Pro\Toshiba SD Host Controller Driver" and follow the instructions on the screen.
  10. Finally, restart the Windows

  For the SD memory card driver

  After you have installed the SD host controller driver,
  1. Insert the SD memory card into the SD slot.
  2 operating system detects and starts to install the driver from SD card.
  3. specify the INF ({CD player}: Windows XP Pro\Toshiba Driver SD Memory Card) and forward the installation process.
  4 copy the file SDDEVMGR.dll in the Windows system directory.
  Note that the system directory means \WINDOWS\SYSTEM32 for Windows XP.

• How to add devices to the network of the homegroup?

  I have two samsung bd-c5500 and they are connected to my home network and I stream from my Asus win7 64-bit wmp 12 (trednet router 802.11n.) I have my xbox 360 connected, but I barely use this device for streaming movies. Back to my question, on my local network my 360 laptop shows and xbox but it shows no samsung devices but if I click on all the networks I see samsung devices. Can I move samsung LAN devices?

  Hello

  Homegroup is a way to network and share computers (some devices) that are working with the IPv6 TCP/IP stack.

  If you Samsung bd-c5500 is not compatible with IPv6 (look on the Samsung support site), then you must configure the network as a working IPv4-based network.

• How do you add device to your existing Apple ID?

  I'm unable to connect my iPOD shuffle to my current ID of Apple.

  An iPod (which is not an iPod touch) is not associated with any Apple ID.  It can be associated with an iTunes library (on the computer used to synchronize).

  Can you describe your problem in detail, including why you think this is related to your Apple ID?

• L7780 HP 'add a device' can not detect the printer on the network

  I have a HP OfficeJet Pro L7780 printer and a laptop running Windows 7 Hp. The HP Solution Center has stopped working recently and now gives a message error "HP Solution Center cannot work because your installation of the device is not complete."

  I've uninstalled and reinstalled the software "OJProL7X00_Full_14.exe" and when I go to 'Add a device' it cannot find my printer on the network, even when I enter the IP address.

  I ran "OJ6500vE709_Scrubber_14.exe" - bird 1-2-3-4 and it did make a difference.

  The printer is connected to the network and I can add it as a printer in the window "Devices and printers" window so I can print to it, but without the HP Solution Center software, I can't scan.

  So Windows can detect the printer on the network and when I add the printer in this way, all 4 computers connected to our network can print to it fine.

  HP Print & Scan Doctor detec the printer on the network can. When I run that it is said that the comprehensive software solution for your product is not installed on this computer and when I click on the button 'Install Software', need me just the OJProL7X00_Full_14.exe file. The software seems to install fine but I can't add a device.

  HP printer install wizard for Windows can detec the printer on the network. When I run that it is said that the current full HP software is already installed and drivers seem to be installed correctly. A test page will print perfectly.

  But "Add device HP A" not somehow the printer detec.

  Please notify.

  Hello Impact,

  I see that you spent a lot of time trying to solve the problem of the HP Solution Center not allowing you to scan. Uninstall and install it, rub the software and execution of printing and scanning Dr. / Printer Wizard are all the steps I would have suggested do you.

  I would like you to follow the steps described in this document from HP: the progress bar on the Software Installation stops or stalls, many steps in it you all ready done but please follow the document from top to bottom.

  Before you start to trouble shoot the issue still provides also the computer is not connected to a VPN (Virtual Private Network) and you can access the printers on-Board Web server by entering the printers IP address in Internet Explorer.

  Let me know how this document from HP has helped.

  Thank you

• Unable to see or add Xbox 360 to the list of devices 'Play To' on the Surface of RT

  I am not able to see my Xbox in the list of options to play from applications such as the application of video on the Surface RT. On the side of the Xbox, I have ensured that the 'Play To' option is enabled under settings--> system-->--> connected devices/Remote devices Console settings. I tried to "Add Device" in the menu devices in the section parameters for laptop computer to the Windows 8, but he seeks and finds nothing.

  SmartGlass app can connect to the Xbox.

  Any suggestions?

  Hey Snoozer.L,

  Check out these links.
  http://www.surfaceforums.NET/forum/Microsoft-surface-games/3091-how-connect-Xbox-360-controller-Microsoft-surface-RT.html

  http://www.TechRadar.com/news/computing/PC/streaming-media-in-Windows-8-what-you-need-to-know-1106402

• can I have a tile in windows 8 for facebook and twitter? Also, how can I add a device in the devices on the right side?

  I would like to a tile on the homescreen of Facebook and Twitter (I don't see an APP for either).  I can do this and if so, how?

  How can I add a device to the peripheral icon on the right side?

  Dear NelliBli46,
  Welcome to the Microsoft community!
  
  Question 1: For Facebook and Twitter tile question.
  
  You can get your Facebook account and Twitter RSS directly on your screen to start using applications Photos and people.
  These links help you to configure the applications.
  For the Photos App:
  http://Windows.Microsoft.com/en-us/Windows-8/photos-app-FAQ
  For the purposes of people:
  http://Windows.Microsoft.com/en-us/Windows-8/people-FAQ
   
  
  Question 2: To add a device to the peripheral icon.
  
  You can use this link to add devices to your computer
  http://Windows.Microsoft.com/en-us/Windows-8/Add-device-or-PC-to-network
  
  Once you add a device, under devices in the charms bar you will see what options or devices are available according to the open app or window.
  
  If you still have questions, feel free to contact us.