Add hard drive VCSA 5.5 to the data store

I do the jump for especially vsphere client of web & VCSA 5.5 to change settings on a virtual machine on a host in a data center. The host has 2 data warehouses. The virtual machine has 1 hard disk assigned to datastore1. I go to add HDD to VM but can't find where datastore2 go through them.

Non-Web client Vsphere 5.1 has allowed the addition of material. The wizard showed a location-> specify a cluster datastore or datstore. And then go to datastore2.

If you have any information leading to the resolution of this problem, I got thank you.

PatrickAZ

Patrick,

First, to add a new disk to a computer virtual, the data store where you create the disc must be visible to the ESXi host where VM works... If this is the case, follow the procedure in documentation ESXi: Add a new hard drive in a VM in the Web Client vSphere

Tags: VMware

Similar Questions

  • VMDK is not displayed when you add the drive but shows on browse the data store

    This may be a simple solution but my forehead hurts to hit my head against the wall and need your expert help.

    Environment: running ESX 4.0 with 4 nodes in the cluster.  Each node in the cluster has only one HBA card with double fiber connections that connect to both sides of FC SAN.  There is not a fiber between nodes and SAN switch, so direct connect.  Built two systems to support Exchange 2007 using the CCS.  Using a FC SAN to shared disk space and iSCSI for disk space not shared.

    Problem: have added 5 player glow spaces on System #1 using RDM and they appear.  Try to load the same readers in the System #2.  I am able to load 4 readers in the System #2 but the 5th disc (which is in fact the reader 3rd in the series) refuses to show when I added the player.  The change settings - & gt; Add Hard Drive - & gt; Use the existing - & gt; Open the data store and the folder where the virtual machine from the system files and the folder where the LUN mapping lie as they are stored with the system.  But at the opening of this file the LUN mapping in question is absent.  All others appear.  However when I right click to browse the data store outside of the settings and go to the folder where the LUN mapping for the virtual drive and it appears.

    Attempts to resolve:

    (1) have removed the drive and delete system #1 data store and we readded to the system = & gt; nothing.

    (2) removed the disk without delete system data store #1 and it added (thus creating two virtual disks in the file for the system to the same LUN... xxx_3.vmdk and xxx_7.vmdk) = & gt; without success.  (xxx_3.vmdk, nor xxx_7.vmdk appear when trying to add a player)

    (3) tried to use a system not intended within the CSC Exchange cluster, attemtped to add the xxx_3.vmdk or xxx_7.vmdk and both appear as an option.

    I am at a total loss.  Do I need to trash the system no. 2 and rebuild?  Is there a problem of possible system configuration #2 that does not allow him to see the two virtual drives?  The #2 system configuration is corrupt?  Do I have to power System #2 power on and off and then try to add readers?  I can the virtual cycle vCenter system?  Or I am much more of a noob that the answer is with myself and I can't see it?  Any help would be welcome.

    When you want to use RDM on hosts, please make sure lun the same number on hosts.

    for example you have assigned the lun 3 host A storage, make sure that it is also the lun 3 to host b.

    Let me know if it does not

    Binoche, VMware VCP, Cisco CCNA

  • I have CS2; It was installed on my old MacBook Pro 17 "and fortunately he used for years.  The aircraft crashed and I got a new hard drive and system board; restore the data from the back upward.  Now I'm trying to reinstall from CD/DVD, but when I get to

    Can I somehow remove the old program files in the back-up?

    Hello

    You can check this link to download and activate the cs2.

    Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

    Concerning

    Gilles marneffe

  • Add the new hard drive into the data store in ESXi 4.1

    Hi all

    I got ESX 4.1 installed on the Dell server, and I have 3 virtual machines on a data store.

    I added a new 500 GB scsi hard drive to the server,

    and I need to add it to the datasore or create a new...

    How can I see this new hard drive? and add it to the data store?

    Waiting for your help.

    concerning

    Abrams

    Oracle system engineer

    Abrams,

    That's all I can help you.  These instructions are based on the Perc 5 / i controller, which I think you have on our system.  You have not specified the server so I just assumed that this is so.

    1. unscrew the hot spare that you just made.  Follow this link from Dell.
    http://support.Dell.com/support/eDOCS/storage/RAID/PERC5/en/UG/HTML/chapterh.htm#wp1061343

    2 follow the link for the installation of virtual disks - http://support.dell.com/support/edocs/storage/RAID/PERC5/en/UG/HTML/chapterh.htm#wp1069357

    This link has three steps to void, skip the step on "spare parts of designate hot."
    a. create the virtual disks and select virtual disk options.   -Online steps to create another disk group and add the new disk to the disk group.
    (b) designate the drives hot spares (optional). =>, YOU CAN SKIP THIS STEP
    c. initialize virtual disks. -online must do.  just do not initialize the incorrect disk.

    After the step #2 c, you should be able to access the drive in ESXi or command-line (list of nmp esxcli devices).

    And no, you cannot add this manaully until do you step #2 above which is to define the disk group, creating virtual disks and initialize the virtual disk.

    Good luck.

  • HP Pavilion PC 13-p120nr x 2 - Add hard drive

    Have a new PC HP Pavilion of the 13-p120nr x 2-4 GB of RAM (chip of DMM3 RAM 8 GB already on the way), with 64 GB SSD.

    Issues related to the:

    -Can I add a HD if it did not come with one initially? (slim model? or a SSD HD as with other models split X 2?)

    -True IF, what guidance for HP kit? (for the HD or HD SSD? Estimated costs for the HD, Kit, or both?

    -Kit drive HARD HP includes the hard drive, or is it just some kind of support for the reader?

    -Is simply an addition of 'plug and play' (by simply taking the back off, install the support and HD in him plugging in and pressing power WE?) Technically not incompetent, but not a nerd from unix/linux/.NET of power or the other.

    -(More stupid Q no doubt) addition HD works in parallel with the memory of the State solid 64 GB already installed? Or does it come to the top as a drive "E:" or "X:" or something else?

    Best regards to all, thank you in advance for reading and answers. See you soon! Bob W, Bristol, RI, USA.

    Geez - Noone has information about this X 2 things? Or is it noone has anything on this particular model (13-p120nr x 2 PC)? Anyone? Thoughts? (or less suggestions on where to find suite learn more?)

    Hello BobW-Bristol-Rl

    I understand that you are trying to update your 13-p120m x 2 HP Pavilion PC and deals with the requirements for adding a SSD HD or HARD drive? Here I quote the User Guide for your laptop "for the additional capacity or features, connect an external drive (sold separately), such as an optical drive or a hard disk, or insert a card directly from your phone or your camera.» This information has been retrieved from page 50 of your user manual.

    As well as the manual says to your laptop, it's that you cannot add a second internal hard drive, but you can add external references those. I myself have 2 drives external hard one that I use as a return to the top of the storage device and the other as another operating system on it.

    Now if you are looking to replace your current SSD, I found nothing which limit the size or who says that you can't switch the internal SSD flash disk. I am including the Guide of Installation SSD HP Upgrade Kit for you to look at and see if it is an option for you.

    One last note, if you are inexperienced in this kind of replacement I wouldn't recommend what to do yourself. Local computer repair shops may charge you to do, but you know it's done properly, and it is not as expensive as replacing the entire notebook.

    I hope I answered your questions and wish you good luck. Thanks for posting on the HP Forums. Have a great day!

  • How can I uninstall Sierra & return to El Capitan without an external hard drive or equivalent required by the instructions online?

    How can I uninstall Sierra & return to El Capitan without an external hard drive or equivalent required by the instructions online? I find too many misadventures and not happy.

    Hello

    Check out this useful tutorial: https://www.igeeksblog.com/how-to-downgrade-macos-sierra-to-mac-os-x-el-capitan/

  • I have an HD camera that records on SD cards.  How can I save raw images to a hard drive without import it at the FCC and then share?

    I have an HD camera that records on SD cards.  How can I save raw images to a hard drive without import it at the FCC and then share?

    YYou want to save raw images, but not all? Is that what you mean? When you import into FVP you can select the songs you want and you can set the library in the Inspector to record the files on any player, anywhere.

  • IPhoto on the external hard drive will not launch despite the force quit and relaunch several times. Can someone help me?

    I have a MacBook from 2008. 4 years ago I moved my iPhoto on an external hard drive. I have thousands if photos on it. IPhoto on the external hard drive will not launch despite the force quit and relaunch several times. Can someone help me?

    < re-titled by host >

    I moved my iPhoto on an external hard drive.

    Did you move the iPhoto library for the external hard drive or the iPhoto application, or both?

    How is formatted the external hard drive? Is the file system on the drive Mac OS extended (journaled) or other system files?  Is the drive directly connected by USB or similar, or is it a SIN?

    IPhoto on the external hard drive will not launch despite the force quit and relaunch several times.

    I don't understand - if you force quit smoking, launches the application, or you can not force it quit?

    IPhoto is suspended without doing anything, when you launch?

    What version of iPhoto does? And what version of Mac OS X?

  • HARD drive is not recognized on the Satellite 2800 200

    Hello

    First of all, I'm Dutch so I hope that I do not have too many mistakes in my English writing.

    I bought a 2800-200 Satellite at a friend's House. This laptop has a problem.
    When it is started is says "insert the disk in the drive system. Press a key when readya?.

    My bios is ACPI BIOS version 1.80
    In Pheripheral in Bios it says disc hard = not used Mode.

    On page two discs i/o: HARD drive: no drive.

    I tried two hard drives and the two were not working and not recognized in the BIOS.
    I have no CD of restoration.

    My questions:

    What kind of central computer has this laptop?
    Can someone help me with the recovery CD?
    What can I do to fix this?
    How can I change my BIOS so that the HARD drive is recognized?

    My hard drive is MK2023GAS and is not broken. There is nothing on this HARD drive.
    But also with the disk hard 10 GB of origin, I had the same problem.

    I hope you can help me and once again I apologize for my English.

    Hello

    I'll try to help you my friend.

    > When it is started is says "insert the disk in the drive system. Press any key when ready
    This message appeared on my laptop after the HARD disk is dead.
    I had to replace the HARD drive and reinstall the operating system.

    I guess that it of the same problem with your laptop. The HARD drive is not present or not recognized, and you will need to install a compatible HDD for the operation of the OS.

    I have google a bit and discovered that this laptop comes with the 10 GB HARD MK1016GAP of Toshiba drive. It supports the interface ATA-2/ATA-3/ATA-4/ATA-5.

    Please note that many BIOS have a limit of size of HARD drive. This means that not all HARD drive sizes are supported! I assume a 20 GB should be compatible, but this is just my own opinion
    > How can I change my BIOS so that the HARD drive is recognized?
    The BIOS can be modified outside the update (check page driver Toshiba-> Archive-> archive of Satellite).
    But vary important is that you use a compatible HARD drive.

    > Can someone help me with the recovery CD?
    Don t know if you will be able to order this CD at the service provider allowed in your country, because the laptop is really an oldie. But you should ask the guys.
    What you is to install the OS from the Microsoft CD-ROM and then could install drivers needed.

    Greetings

  • Hard drive is not recognized in the BIOS - Equium A60

    Hi hope someone can help. I have a Toshiba Equium EA60-173 and the hard drive is not recognized in the BIOS. When I remove the hard drive and put it in another laptop it is detected fine. I also tried another hard drive in the Toshiba and that does not work either. So I suspect the IDE controller has disappeared, but can I do to confirm this? I wish there was an option in the BIOS to force detection. I updated the BIOS but still the same.

    This laptop is only just out of warranty, so if it is the controller would I need to replace the motherboard? Are there other options at my disposal?

    Thanks in advance.

    Hi Neil,

    Unless there is some physical\problem with the cable/connector hard drive, then it is most likely that you will have a new mainboard for your laptop. I suggest you to contact an authorized service partner and ask them to check your laptop and give you an estimate of the cost of the repair. Then you can try to shop for less expensive alternatives.

    Kind regards

  • The discs to a hard drive with an IO error can be removed and placed in a good hard drive to try to recover the information about the bad drive?

    The discs to a hard drive with an IO error can be removed and placed in a good hard drive to try to recover the information about the bad drive?  Both units are of the same type and speed.  both are records hard internal seagate w double disc in the drives

    On Thu, 20 Sep 2012 14:41:30 + 0000, Stephen_403 wrote:

    The discs to a hard drive with an IO error can be removed and placed in a good hard drive to try to recover the information about the bad drive?  Both units are of the same type and speed.  both are records hard internal seagate w double disc in the drives

    No, at least not by us.

    Open a hard drive for some reason any at all can be done in special
    laboratory as parameters. Something else will destroy the disk.

    There are companies trying to recover data from broken disks,
    and they are sometimes successful. And who knows, maybe they
    sometimes use methods such as what you describe.

    But if you plan to use such a company, know what they
    are all very expensive. It does not for most people.

    For the future, if you have files you want to be sure are not
    lost, make sure to have in place a backup procedure on a regular basis the
    external media player.

    Ken Blake, Microsoft MVP

  • When you try to transfer a file of 8 GB on external hard drive 'file too large for the destination system message' to get there is that much space on disk

    When you try to transfer a file of 8 GB on external hard drive 'file too large for the destination system message' to get there is that much space on disk

    Hello

    Discs formatted with the FAT be limited to files with a maximum of 4 GB. You can format outside
    drive drive with NTFS, contact the manufacturer if necessary pilot or split the file into parts under
    at 4 GB.

    Overview of FAT, HPFS, and NTFS file systems
    http://support.Microsoft.com/kb/100108

    How to go beyond the limit of 4 GB on FAT32
    http://lazybit.com/index.php/2007/03/01/how_to_get_over_the_4gb_limit_fat32

    -------------------------------------------------------------------------------------------------------------------------

    The ZIP file and then divided the ZIP which helps maintain the integrity of sharing files and restoring.

    Zip and Split - free
    http://zipandsplit.toolazy.me.UK/

    Split and Zip - free
    http://www.jtoolgame.com/tools/splitzip.html

    Akhir Split Zip - free
    http://www.mydigitallife.info/2009/04/24/Akhir-split-zip-splits-files-into-smaller-zip-files/

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • How to switch my system on a larger hard drive without having to reinstall the OS and lose my data?

    replace the hard drive

    I'm looking to replace my hard drive but I need all the files it is about it, passing a small hard drive to a larger hard drive. My question is how can I save all the files on the disk and how can I get the operating system on the new hard drive without the original disk

    If your current system does not work, there is no need to bother with data backup, installation of applications and get a Windows XP installation CD (although regular backups are important to do as a general practice).

    Instead, clone your current hard drive to your new hard drive.  All you need is an external hard drive enclosure and disk cloning software.  In addition, once you have made sure that everything works correctly, put the old drive in the external box and use it for backups.

    Some of the cloning apps below are also disk 'images' (e.g. Acronis True Image).  A disk image can be compressed so that, for example 58 GB of data can produce a 40 GB image file.  Some of the apps, and of also can selectively backup specified files.

    The housings of external drives more to connect to a USB port.  Make sure just that buy you one with the good 'form factor' (portable = 2.5 inches, computer desktop/Tower = 3.5 inches) and internal drive connector.  Many but not all speakers can deal with SATA and PATA time.

    This example (for laptops) is not the less expensive external hard drive enclosure, but it's a decent case that can be used with either SATA or IDE (PATA) drives and comes with its own software package of cloning: http://www.newegg.com/Product/Product.aspx?Item=N82E16817155602

    It is a very good buy for a drive IDE (PATA) Office size: http://www.newegg.com/Product/Product.aspx?Item=N82E16817155602

    In general, Newegg is a good place for your search options by looking at the comments by users.

    If you have a Western Digital hard drive, you can get a version of Acronis True Image free of WD (http://support.wdc.com/product/downloaddetail.asp?swid=119) or you can get the software of cloning separately (this is not an exhaustive list and in no particular order, some are free, some not):

    Acronis True Image Home
    EASEUS ToDo Backup
    Paragon Drive Copy or Partition Manager Personal
    Casper
    Norton Ghost

    XXClone

    Macrium Reflect free

  • Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

    Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

    A message on the RAID 0 volume failed is a recognizable error message, but the news is not good.

    RAID, by its nature, requires 2 or more drives.  RAID = redundant Bay of independent (or inexpensive) disks

    RAID 0 is the worst of the different RAID choices.  It increases the performance of hard disk by spreading or striping, data on two disks so that he can read and write more quickly. Unfortunately, such a picture offers no protection of data - in fact, it increases the chances of loss of data since the failure of a disk in the array results in the loss of all data on both drives. RAID 0 configurations are standard on high-end and PCs graphics games and provide a performance gain measurable, albeit modest for games, graphics applications and other programs intense from the hard drive.

    In view of the foregoing, the best course of action for you and your parents is to take the computer to a local computer professional - not a type of place BigBoxStoreUSA or GeekSquad.

  • E-Machine with XP when you don't use shutsdown. Hard drive stops but starts when the mouse moves. But XP does not start. Need to unplug and then plug in and start the PC.

    ' ' I get the error message 'A' recovered from a serious error report = ' BCCode ea BCPI 8507b6e8 BCP2 869 B 7800 BCP3: 869 B 8378.  Included files: "owner\locals\locals ~ 1\temp\wer9274." DIR00\MINI 121909-02mp "Hope someone understands. I keep the hard drive running to collect the info from my weather station.

    Go into Control Panel, then Power Options.

    On the power management tab, what is your power mode? Below which correspond to the parameters for this method of power - to turn off the monitor, hard drives & go standby time of the system.

    If you want to keep the hard drive, scroll down the drop-down lists & select "Never" turn off hard drives and the day before.

    Go to the Hibernate tab, and then remove the tick in the enable hibernation check box.

Maybe you are looking for