Add-ons Manager does not list the Add-ons
I've updated to Firefox 6.0. Since doing so, the Add-ons Manager does not appear Add-ons (it is installed or those who have been disabled by the upgrade).
The Add-ons Manager simply displays an hourglass "Loading" and no progress.
A number of my modules was not suitable for Firefox 6.0 and were disabled during the production of process that the Manager screen does not load then I don't see a checklist of these installed or disabled. They appear in the troubleshooting information.
Make sure that the "Get Add-ons" tab is not enabled on the subject: addons page.
You can click on the tab 'Extensions' to see the installed extensions.
Tags: Firefox
Similar Questions
-
W7 Device Manager does not recognize the Intel AMT devices
Please help: where can I find - how to install the latest drivers Intel AMT for Windows 7.
Hello
Thank you for the question to Microsoft Community. I'll give my best to help you.
From your problem description, I understand that the Device Manager does not recognize the Intel AMT devices
What is the brand and model of the computer?
Check out these links and see if they help.
Computers that use Intel's vPro technology can have devices that are not recognized in Windows 7 Device Manager
http://support.Microsoft.com/kb/976728
Clean installation WARNING: Back up your files before you begin reinstalling Windows, even if you're reinstalling Windows on a hard disk partition. A clean installation replaces the current version of Windows and all personal files.
If your motherboard supports AMT technology, you can download, install the drivers from this link.
AMT: Intel® AMT Driver for Intel® motherboards
http://Downloadcenter.Intel.com/Detail_Desc.aspx?&DwnldID=16936
Note: This download is valid for the products listed below.
Intel® card mother DB43LD
Intel® card mother DQ43AP
Intel® card mother DQ45CB
Intel® card mother DQ45EK
If the problem persists, I suggest you to contact Intel support. http://communities.Intel.com/Community/Tech
-
How to display a thumbnail view of pictures? When I open the folder what I see is a generic panoramic picture rather than individual images. My vista does not list the thumbnails in the dropdown display menu. Before updating the Windows I used to be able to see thumbnails of my photos views when I opened the files with images inside.
Here's a possibility... go to... Start ORB / Control Panel.
Folder options / tab / files and folders / uncheck
"Always show icons, never thumbnails" / apply / OK. -
When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file. Help, please.
As I suggested previously, conversion to a format like
. WMV before you import it into Movie maker may be the solution.The free Converter from Microsoft can be a place to start:
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Download Microsoft Expression Encoder 4 with Service Pack 1 (SP1) (freeware)
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24601
(runs under WinXP SP3 / Vista / 7)When you install the program...
Start Microsoft Expression Encoder 4
(Start / programs / Microsoft Expression /)
Microsoft Expression Encoder 4)On the "Load a new project" screen...
Left click... "Transcoding project '...When the program opens, click on... File / import...
(If at any time you get lost while browsing
the program of... to... Window / active Reset
Type or workspace... CTRL + SHIFT + R)Look for the file/s that you want to convert.
(If files do not appear... open the fall
window and choose... All files)Click (highlight) left the files and the left on the Open button.
You can see the files in the "Multimedia content" pane
In the right column... left click on the tab "Output"...
Open the drop directory window and choose an output folder.
(This is where you will find your converted file)On the left, click on the button "encode".
Wait... video encoding CPU intensive and can
be a slow process. It is always best if you do not have
multi-task while files are encoded.Now... try import you again. File WMV in Movie Maker.
More converters:
There are to many converters available on the net...
the following links are some examples. You can
need to experiment to find the best result.Proceed at your own risk *.
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)(1) format Factory (freeware)
http://www.videohelp.com/tools/Format_Factory
(the 'direct link' is faster)
(the file you want to download is: > FFSetup270.zip<>
(FWIW... installation..., you can uncheck
'all' boxes on the last screen... even in this case, it may
install the Ask toolbar on your system)
(Windows XP / Vista / 7)First, you will need to decompress the file or just open the
Drag FFSetup270.exe out of the folder
and drop it on your desktop. To install left click.(2) Freemake Free Video Converter (freeware)
http://www.Freemake.com/free_video_converter/
(Windows XP / Vista / 7)(3) Koyotesoft Free Video Converter
http://www.koyotesoft.com/indexEn.html
(2000/XP/2003/Vista/Seven)(4) Sothink Free Video Converter
http://www.Sothinkmedia.com/video-converter/
(Windows XP / Vista / 7)(5) hamster Free Video Converter
http://www.PCWorld.com/downloads/file/FID, order 155794, 4 pages, 1/download.html
(Windows XP, Vista, 7)
(If you choose Custom Installation
You can uncheck additional modules you
do not want to install)(6) quick Media Converter
http://www.Cocoonsoftware.com/
(Win XP, Vista, Win 7 Home Premium)(7) SUPER © Simplified Universal Player Encoder & Renderer
http://www.videohelp.com/tools/Super
(the download mirror site is faster) (Windows XP / Vista / 7)(8) Xilisoft Video Converter
http://www.Xilisoft.com/video-converter.html
(not freeware but receives good reviews)
(Windows XP (SP2 or later) / Vista / 7)Good luck...
-
computer does not list the available wireless networks
My computer is used to list all available wireless networks I could choose, but now not a list of people or don't allow me to search for available networks. I'm in a place where I know there is a wireless network available, however, my computer will not display it or no matter what other networks unless I plug in an ethernet cable to my computer. Then, it connects, but still does not display the wireless options. Help, please!
Looking for a switch on the case of the computer that turns on and off wireless networking. Check the manual of the computer user to see if there is a combination of keys, such as Fn + F5, which turns on and off wireless networking. Boulder computer Maven
Most Microsoft Valuable Professional -
BlackBerry Smartphones Media Manager does not recognize the Media card
Installed the media 2G card. Card is able to format and presents itself as 1.8 GB. With mass storage, office software (Roxio media manager) does not show - memory card from the device. In mass storage mode (which, according to the manual means the acts of the device as a USB storage device), PC sees the device, but does not not the files copied to it. Has spent about 2 hours with the technical support of Verizon... they are puzzled.
I found a workaround for the music files on the card. I removed from the Blackberry and installed in an SD adapter full-size and there in a USB key with a SD slot. My computer has seen the media card (embedded in the USB device) and I flew over songs in the repertoire of music on the media card, put it back into my phone and viola... the music file was there!
-
The Task Manager does not display the process and tabs, even if the menu can be seen.
Dear community, I had a serious problem on my task manager. It does not display the process and tabs, although the menu is visible. Also, any time I open a program or system of adjustment, some and especially no option can be seen since there is no specified words.
Here is a link that you can see a screenshot on my problem.
http://kepfeltoltes.Hu/121231/592911021Untitled_www.kepfeltoltes.hu_.PNG
Thanks in advance for your help
Original title: Task Manager problem
I managed to solve the problem by looking for alternatives. Apparently, the problem was caused by a dat file (C:\windows\system32 folder called FNTCACHE.) (DAT) I deleted and it worked like a magic. Everything was normal again.
Deleted it and the work of all the graphical interfaces as it should.Thanks for your answer, in any case. I just post the solution here if someone ever faced with such a question in the future.
Kind regards
Laszlo -
Device Manager does not display the DVD/CD ROM Diver
In my windows 8 assessment does not show the CD-ROM/DVD-ROM driver. When I insert a cd, it does not show. my windows is activated. Please help because I am a student, but when I insert the modem, then I watch CD-ROM/DVD-ROM driver and at the same time when I insert any cd, it doen't show. only that a lot it shows
Hello Rahul,
Thank you for your response.
To better help you, could you please confirm a number of things like:
- The computer is connected to a domain?
- The drive shows up in disk management?
I suggest to try the steps mentioned by Geethu B responded on 30 October 2012 the link below and check if this can help:
NOTE: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ )
How to back up and restore the registry in Windows
For your reference, follow the link below:
https://support.Microsoft.com/en-us/KB/314060?WA=wsignin1.0
Please let us know if you need more assistance. We will be happy to help.
-
> I'm trying to uninstall and reinstall my HP printer.
> In my Add/Remove Programs list, there are several HP programs listed and I started to remove them (has done this in the past with no problems).
> The last of them, I clicked on delete does not give me the options to 'Change/Remove '. The program is called "HP PSC700 Series" and seems to be the main
part of the installed software - it is a 243Mbs size.
What I tried:
> I have reinstalled the printer from the CD program in the hope that it can replace every thing and then I could uninstall correctly - that didn't work.
> Look in C:\Program Files - there was no Hewlett Packard folder
> Look in the start menu > all programs - there was a list of Hewlett Packard who has expanded the. When extended out, he said "empty folder".
> Posted the problem on the HP Forum twice in two months, got no response.
> Learned how to remove the registry keys under "Software" in HKEY Local Machine and HKEY Current User. Also under HKEY USERS > default > Software.
None of this has worked.
> Gave a link to a family member to Support MS - "How to manually remove programs from the Add/Remove tool" I followed these instructions and
the program remains still present in Add/Remove programs.
Does anyone know how I can remove this program that has no program folder, no registry keys, but still works? I can still print from this computer, but cannot access the HP Director (a function to scan, print, clean & align print head, etc.), which is what started this process of trying to uninstall/reinstall the program.
Any help would be greatly appreciated...
Photo TakerYN
My system is;
Dell Dimension 4550
Windows XP Pro w/SP-3 (version 2002)
Of photo TakerYN...
This message can be considered "solved!" I was finally able to remove the program with the HP disk. I tried to reinstall (overwrite) the program, but I received a message that the installer has detected that the program is already installed. I wanted to try it manually, so I 'opened' the disc, you click on "setup" and received the same message. At this point, I was ready to try anything and noticed the "Launcher" icon and thought, what the heck, can't hurt to try at this stage, so I clicked it. I wasn't expecting the screen, I had, who said that it would be to uninstall the program. I thought it was too good to be true and easy way (after all), but after that it's over, I checked my Add/Remove programs and my 'problem' program was gone.
Thought I would post this so anyone who might encounter the same problem can try this.
Photo TakerYN
-
The CC extensions Manager does not list install programs
Dear community,
In a corporate environment, I have difficulties with regard to installing extensions. Namely: the extension manager fails to list installed software:
The "BridgeTalk.__diagnostics__"; the result is as follows:
Result: BridgeTalk Diagnostics ---------------------- Info: Name = estoolkit-4.0 Status = PUMPING Group = cs Path = C:\Program Files (x86)\Adobe\Adobe ExtendScript Toolkit CC\ExtendScript Toolkit.exe Version = 2.0 Build = ES 4.5.5 Next serial number = 41 Logging: = OFF Now = 14:45:45 Messages: Message Version = 2.05 Authentication = ON Digest = ON Thread: estoolkit-4.0#thread Avg. pump interval = 57ms Last pump = 32ms ago Ping: 7 ECHO_REQUEST: ECHO_RESPONSE Timeout = undefined Handler = undefined STATUS: PUMPING Timeout = undefined Handler = undefined MAIN: MAIN Timeout = undefined Handler = installed LAUNCHED: LAUNCHED Timeout = undefined Handler = installed DIAGNOSTICS: DIAGNOSTICS Timeout = undefined Handler = installed INFO: INFO Timeout = undefined Handler = installed SETUPTIME: thread=0ms, left=37ms Timeout = undefined Handler = undefined Instances: 3 estoolkit-4.0#dbg: msg[14:45:45]: 00000036 @BT>Version = 2.05 Target = estoolkit-4.0#dbg Sender = estoolkit-4.0#dbg Sender-ID = localhost:win4324 Timeout = 13:45:46 Type = Ignore Response-Request = Timeout Headers = (no headers) Timestamp = 14:45:45 Serial-Number = 36 Received = undefined Result = undefined Error = undefined Body = (empty) Incoming: 1 Outgoing: 0 Handler: 9 ExtendScript = for all messages Error = for only msg #25 Error = for only msg #27 Error = for only msg #32 Result = for only msg #36 Error = for only msg #36 Timeout = for only msg #36 Result = for only msg #38 Error = for only msg #38 estoolkit-4.0#estk: msg[14:45:45]: 00000038 @BT>Version = 2.05 Target = estoolkit-4.0#estk Sender = estoolkit-4.0#dbg Sender-ID = localhost:win4324 Timeout = 14:55:45 Type = Debug Response-Request = Result Error Headers = (no headers) Timestamp = 14:45:45 Serial-Number = 38 Received = undefined Result = undefined Error = undefined Body: 107 bytes Text = <get-properties engine="main" object="$.global" exclude="undefined,builtin,prototype" all="true" max="20"/> Incoming: 1 Outgoing: 0 Handler: 1 ExtendScript = for all messages estoolkit-4.0: (main) Incoming: 0 Outgoing: 0 Handler: 1 ExtendScript = for all messages Targets: 7 Connector = PCD Installed: 0 Running: 0 bridge-6.064: Group = cs Path = C:\Program Files\Adobe\Adobe Bridge CC (64 Bit)\Bridge.exe Display Name = Bridge CC (64 bit) MsgAuthentication = ON MsgDigest = ON ESTK = ON Status = (not running) ExeName = Bridge.exe dreamweaver-14.0: IDLE Path = C:\Program Files (x86)\Adobe\Adobe Dreamweaver CC 2014\Dreamweaver.exe Display Name = Adobe Dreamweaver CC 2014 MsgAuthentication = ON MsgDigest = ON ESTK = OFF BundleID = com.adobe.dreamweaver-14.0 Status = IDLE Info: Version = 2.0 Build = ES 4.5.5 Next serial number = 3 Logging: = OFF Now = 14:45:47 Messages: Message Version = 2.05 Authentication = ON Digest = ON dreamweaver-14.0: IDLE Thread: dreamweaver-14.0#thread Avg. pump interval = 1882ms Last pump = 200ms ago Ping: 7 ECHO_REQUEST: ECHO_RESPONSE Timeout = undefined Handler = undefined STATUS: IDLE Timeout = undefined Handler = undefined MAIN: MAIN Timeout = undefined Handler = installed LAUNCHED: LAUNCHED Timeout = undefined Handler = installed DIAGNOSTICS: DIAGNOSTICS Timeout = undefined Handler = installed INFO: INFO Timeout = undefined Handler = installed SETUPTIME: thread=1ms, left=6597ms Timeout = undefined Handler = undefined ExeName = Dreamweaver.exe estoolkit-4.0: PUMPING Group = cs Path = C:\Program Files (x86)\Adobe\Adobe ExtendScript Toolkit CC\ExtendScript Toolkit.exe Display Name = ExtendScript Toolkit CC MsgAuthentication = ON MsgDigest = ON ESTK = ON Status = PUMPING Info: Group = cs Version = 2.0 Build = ES 4.5.5 Next serial number = 46 Logging: = OFF Now = 14:45:48 Messages: Message Version = 2.05 Authentication = ON Digest = ON Thread: estoolkit-4.0#thread Avg. pump interval = 57ms Last pump = 2632ms ago Ping: 7 ECHO_REQUEST: ECHO_RESPONSE Timeout = undefined Handler = undefined STATUS: PUMPING Timeout = undefined Handler = undefined MAIN: MAIN Timeout = undefined Handler = installed LAUNCHED: LAUNCHED Timeout = undefined Handler = installed DIAGNOSTICS: DIAGNOSTICS Timeout = undefined Handler = installed INFO: INFO Timeout = undefined Handler = installed SETUPTIME: thread=0ms, left=37ms Timeout = undefined Handler = undefined ExeName = ExtendScript Toolkit.exe exman-7.0: Group = cs Path = C:\Program Files (x86)\Adobe\Adobe Extension Manager CC\Adobe Extension Manager CC.exe Display Name = Adobe Extension Manager CC MsgAuthentication = ON MsgDigest = ON ESTK = OFF BundleID = com.adobe.exman Status = (not running) ExeName = Adobe Extension Manager CC.exe illustrator-18.064: Path = C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\Illustrator.exe Display Name = Adobe Illustrator CC 2014 MsgAuthentication = ON MsgDigest = ON ESTK = ON Status = (not running) ExeName = Illustrator.exe photoshop-80.064: Group = cs Path = C:\Program Files\Adobe\Adobe Photoshop CC 2014\Photoshop.exe Display Name = Adobe Photoshop CC 2014 MsgAuthentication = ON MsgDigest = ON ESTK = ON BundleID = com.adobe.Photoshop Status = (not running) ExeName = Photoshop.exe switchboard-3.064: Group = cs Path = C:\Program Files\Adobe\Adobe Bridge CC (64 Bit)\SwitchBoard\SwitchBoard.exe Display Name = SwitchBoard 3.0 (64 bit) MsgAuthentication = ON MsgDigest = ON ESTK = OFF Status = (not running) ExeName = SwitchBoard.exe Installed: 5 Running: 2 Groups: 143 cs3: acrobat-8.0 aftereffects-8.0 soundbooth-1.0 bridge-2.0 contribute-4.5 devicecentral-1.0 dreamweaver-9.0 encore-3.0 estoolkit-2.0 fireworks-9.0 flash-9.0 illustrator-13.0 indesign-5.0 indesignserver-5.0 incopy-5.0 photoshop-10.0 premiere-3.0 premierepro-3.0 stockphotos-1.5 audition-3.0 cs4: acrobat-9.0 aftereffects-9.0 soundbooth-2.0 bridge-3.0 contribute-5.0 devicecentral-2.0 dreamweaver-10.0 encore-4.0 estoolkit-3.0 fireworks-10.0 flash-10.0 illustrator-14.0 indesign-6.0 indesignserver-6.0 incopy-6.0 photoshop-11.* premierepro-4.0 audition-4.0 ame-1.0 exman-2.0 cs5: acrobat-9.0 aftereffects-10.0 soundbooth-3.0 bridge-4.0 contribute-6.0 devicecentral-3.0 dreamweaver-11.0 encore-5.0 estoolkit-3.5 fireworks-11.0 flash-11.0 illustrator-15.0 indesign-7.0 indesignserver-7.0 incopy-7.0 photoshop-12.* premierepro-5.0 audition-5.0 ame-2.0 exman-3.0 flashbuilder-4.0 flashcatalyst-1.0 ts1: captivate3-en_us captivate3-fr_fr captivate3-it_it captivate3-ja_jp captivate3-es_es captivate3-de_de ts2: captivate-4.0 el2: captivate-5.0 as1: acrobat-10.0 ts3: robohelp-9.0 framemaker-10.0 cs55: aftereffects-10.5 audition-4.0 bridge-4.1 contribute-6.1 devicecentral-3.5 dreamweaver-11.5 encore-5.1 estoolkit-3.6 fireworks-11.1 flash-11.5 illustrator-15.1 indesign-7.5 indesignserver-7.5 incopy-7.5 photoshop-55.* premierepro-5.5 ame-2.5 exman-5.5 flashbuilder-4.5 flashcatalyst-1.5 switchboard-2.0 el25: captivate-5.5 cs60: aftereffects-11.0 audition-5.0 bridge-5.* contribute-6.88 devicecentral-4.0 dreamweaver-12.0 encore-6.0 estoolkit-3.8 fireworks-12.0 flash-12.0 illustrator-16.* indesign-8.0 indesignserver-8.0 incopy-8.0 photoshop-60.* premierepro-6.0 ame-6.0 exman-6.0 flashbuilder-4.52 switchboard-2.0 prelude-1.0 speedgrade-6.0 el60: captivate-60.* ts4: robohelp-10.0 framemaker-11.0 cs70: audition-6.0 bridge-6.* dreamweaver-13.0 encore-7.0 fireworks-13.0 flash-13.0 illustrator-17.* indesign-9.0 indesignserver-9.0 incopy-9.0 photoshop-70.* premierepro-7.0 ame-7.0 exman-7.0 flashbuilder-4.7 prelude-2.0 speedgrade-7.0 aftereffects-12.0 el70: captivate-70.* cs70: switchboard-3.* cs80: bridge-6.* photoshop-80.* estoolkit-4.0 ----------------------
Of course, I tried different combinations of re-installed and rebooted. EM remains tenacious.
Any help?
-Willem
Please check the version of the CC extensions Manager (click on 'Help'--> 'about Extension Manager'). I assume you are using 7.0.0.347 or 7.1. Support for CC 2014 applications was added in point 7.2. Please update to the latest version 7.2.1 EM.
-
The extensions Manager does not see the 2015 Photoshop
I tried to reinstall both the result of the previous
I found a solution that worked for me.
- Reinstall CC 2014.
- Once CC 2014 is reinstalled, Adobe Extension Manager sees this product and can install the plugins in this version.
- Their presence in 2014 CC makes them available to CC, 2015.
- I heard that Adobe technical support recommends the same thing.
- Adobe has a Web site on how to reinstall CC 2014: https://helpx.adobe.com/creative-cloud/help/download-install-app.html. Click on the link 'Install previous versions of the applications' to access this section of the page.
- Once CC 2014 is reinstalled, it might be useful to check to see if the extensions manager sees it as a product in the left column. If it does not appear, try to do a cycle of removal/installation of your "My Add-ons" section of the Web Adobe AddOns site.
-
The Windows XP Task Manager does not display the names of process image
I am running Windows XP with SP3. Image of process names are not displayed in the Task Manager, and in the column picker image process name, although is TICKING, is grayed out. I don't have the PID numbers. So I can't say what processes are underway. There are 57 processes running, that seems to be too many. I tried running "tasklist > tasklist.txt"from command, prompt but it just flashes and nothing happens. " Does that mean I have a Trojan horse? What can I do about it?
BDF
That seems good enough for me - now, we know that your XP version and Service pack, System brand and model, BIOS version, the amount of RAM installed, the size of your paging file according to NEC, your system has SATA drives and a few other things.
47 process may be OK depending on what you have installed and running on your system.
Looking at my notes, I see that I thought a while back that the tasklist.exe program does not come with XP, but there's a copy on my SkyDrive for you to download.
Here's how:
Here is the link to my SkyDrive and you can get the file you need here:
https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311
You can download it and when you do, place a copy of the file in these folders (assuming that Windows is installed on your C drive):
c:\Windows\System32
When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.
When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.
You can download the file without the extension, and then rename the file to add the appropriate extension. You do not want to use a file called tasklist when the name of the file should really be called tasklist.exe (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.
Then, when you run tasklist > tasklist.txt, you should end up with a file tasklist.txt you can open it with a text editor.
Even if you think yous system may be achieved a malware, it has never hurts to run these free scans before troubleshooting:
No matter what you use for malware protection, follow these steps:
Download, install, update and do a quick scan with these free malware detection programs (not at the same time) and remove all threats:
Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
SUPERAntiSpyware: (SAS): http://www.superantispyware.com/SAS will probably report a lot of tracking cookies and you can just let him delete them.
They can be uninstalled later if you wish.
The scans by operating clean, restart, and then fix any problems.
-
iMac does not list the HP B210 Scan function in applications
I'm a new Mac user. OS X 10.7.3. When I installed my HP B210, I use on my Dell laptop, the iMac did not accept the installation but disc downloaded the drivers. The printer works fine. The problem is that I do not think the B210 listed in my applications. I want to scan something to my computer but I can't find any icon or application that will allow me to do the analysis. On my Dell, I had a program called "HP Scan" icon that lets me choose if I wanted to scan to a document, e-mail, TIF, etc. I can't find this feature on the iMac. This printer/scanner is wireless. I tried to reset the printing system, as suggested in other posts, but that seems to have changed nothing.
Thanks for any help you can provide.
Download and install this: support.apple.com/kb/DL907
Now, let's reset the printing system:
-Go to System Preferences > print & Scan
-Right (or control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - This will remove ALL your printers!
-Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks. -
I am running Palm Desktop 4.1.4 on my laptop XP Home Edition SP3
I found that when I hotsynced many my Palm brand programs have not been not sync.
Looking at my Palm Desktop, I found the users 'user' and a user profile. The user has no data inside (no contact etc..) Profile has my contacts and calendar etc.
By selecting 'custom' hotsync manager is initially a field empty user with lines listed below.
By clicking the user field concludes that 'user' but not the user profile that displays in Palm Desktop.
In addition, the lines show items that have been uninstalled from the E2, six months ago.
In Palm Desktop, if I select the 'user' tab up hotsync user allows a selection of "Custom" and "File Link". Slideshows custom the same incorrect lines as the custom in Hotsync manager.
If I select the profile of the user on the ground "Custom" and file link are whitewashed and don't allow selection.
When I hotsync my Palm applications to my my Palm desktop user profile backs up.
I uninstalled my office palm of the laptop and reinstalled but it keeps picking up the same bad ducts and does not pick up the user's profile.
I went to Vista laptop that I have access to and what he was able to successfully back up but I need what he is saved on my XP laptop.
Looks like you need to do a clean tear and a relocation of the desktop on the XP machine. Uninstall the software and remove the PalmOne under Program Files folder. Then reinstall.
Message relates to: None
-
BlackBerry Smartphones Media Manager does not detect the 16 GB Media Card
I just bought a microSD 16 GB for my Blackberry "BOLD" and the phone itself is concerned, it works very well. I am able to navigate the map using my phone and he wrote that a multimedia card is present.
The problem I have is with the Desktop Manager of "Media Manager". I want to be able to transfer/encode music and videos on my new media card, but it does not appear in the list. I tried upgrading to the latest version (4.7) and still nothing. The only thing that appears in the "My devices" list is the built-in 1 GB memory of the device.
I called Rogers for technical support, but they do not support the Media Manager.
Any help would be greatly appreciated.
Thank you!
Brendan
Please read the link
Maybe you are looking for
-
Firefox not displaying does not changes to the Wordpress site
I made changes to my style.css files for my wordpress sites. It seems that my changes do not appear on other computers. However on my MAC OS X, the changes do not appear on Firefox. I see the changes on Safari (on my MAC) I cleared cache, I reset Fir
-
Passport for Mac is connected to the USB port on the MacBook Pro Yosemite. Appears on the desktop. Can open and view previous backups, but it does not save. Worked last month. At first did not see the same on the desktop but restarted and am now in t
-
Please help me with my laptop HP MINI, which is showing a message whenever I try to start the machine below. "Enter the current password. The password check failed. Fatal error... Halter system. CNU9383H0J ". I don't know what password to enter. Plas
-
Lsass.exe endpoint format is invalid when installing servre 2003
I use Win XP Pro 32 bit, with my good setup PC with 500 GB HARD drive and 2 GB of RAM, now, I try to install Server 2003 EE 32 bit, as a dual operating system with XP, I start my PC from CD, the installation, server 2003 Setup copies all the files wi
-
I bought the E3000 in summer and wired & installed in an old laptop that was hooked to our modem. It was the only computer at home and I was installing it so my son could play internet games on their Wii with their friends. My laptop was not already