Add PCI Parallel port card for PC comes with no port does not print.

I recently got a few new computers that were shipped with Windows 7 Professional. I forgot that they do not comes with a parallel port.

These computers are intended for a point of sale application, which requires a matrix printer. First I tried USB to parallel to connect the printer, however, this does not work, because the printer is not smart enough to identify itself, it will not appear as a printer.

My next solution was to add parallel ports via PCI cards. The card installs very well, and Windows 7 detects the drivers for it and installs. No errors appear in the Device Manager, but a couple of weird things happen.

1. the device manager gets the parallel ports under Ports (COM & LPT) but it also gets a "multifunction adapter" in a different section (not in front of the PC now, so I don't remember which.) Both devices appear to be fine and report that they are working correctly.

2. under "Devices and printers", I get 1 (or in the case of a card dual parallel port, 2) ' Microsoft aw Port"devices.

I then install the driver from the printer and add the printer to "LPT3" which is the device of parallel port added in Device Manager. Print a test page, and... Nothing. Open the print queue and it is empty. Try printing a test page, and it will appear briefly in the queue and disappears, just as it would if the print job was successful. If I try another device, it (as expected) reports an error that the device does not exist.

Although it does not directly concern, article in the knowledge base at the http://support.microsoft.com/kb/883253 seems to describe some similar circumstances, enough so I wonder if there may be a connection. Maybe the parallel port arbitrator is not installed in Windows 7 by default if the PCs have no one? If this is the case, how do I install it?

If it's a goose chase wild... Well, that's why I asked the question.

Help!

Well, call it weird...

I found an another USB to parallel adapter, rather than trying to directly convert the printer, it installs like a USB IEEE1284 adapter. (If it's a USB parallel port). This appears also in the 'ports and devices', but as an adapter of 1284. Try the printer. Bingo.

Here's the weird part. Once Windows 7 installed the drivers for this device, I unplugged and then reconnect the printer parallel port PCI. I changed the printer I have installed (on the USB001 device) unit LPT3 and bingo. It still prints. He continued to work even with the unplugged USB adapter.

So I strongly suspect that there is some kind of pilot missing for a missing parallel port, which Windows 7 don't think he needed to use a PCI parallel port but he knew that she needed a USB parallel adapter. I only wish I knew precisely what pilot that he was. Maybe this will give some clues so people who know Windows 7 might be able to understand. I'm more than willing to answer questions if anyone wants to know what really happened here.

For memory, the sequence I went through was: I tried the printer (installed with the drivers from the manufacturer for Windows 7, 32-bit) installed on LPT3 device which Windows 7 acknowledged the parallel port as a map. Checked the symptoms that I have stated above. Print job appears to be completed, but the printer does nothing. Uninstalled the printer. Plugged in USB to parallel adapter, expected for Windows 7 recognize the device and install the drivers. Plugged into the printer (PnP does not.) Install the printer using the same drivers as before, but using the USB001. Printer worked. Disconnected the printer from the USB adapter and reconnect the parallel port card. Changed the printer to use LPT3 Ports print configuration tab. This time, it worked.

Repeatability, I did the same thing with the other parallel port PCI card and a similar printer on another position of the same work. This facility began with the installation of map of parallel port PCI first, then followed the same sequence, with the same results.

So, my problem is solved, but I think that it is unreasonable to plug a USB adapter for a PCI card.

Tags: Windows

Similar Questions

  • parallel port does not have the protection key

    I just bought a terca M2. When I try to install a software that uses a hardware key (small connector in the parallel port) I get the message that he found no protection key. I have installed this software on other laptops (also with xp pro) and they are all worked well.
    I also tried two parallel port settings, but it still does not work.

    Please help me solve this problem, otherwise, this laptop will be useless to me.

    Hi robert,.

    have you checked that the chip set driver in Device Manager? As far as I know the parallel port is controlled by the entire ship!

    Have you checked if the parallel port in your M2 works without any problem (for example, a parallel printer) to exclude a defect of material! If there is a material defects you might bring the laptop to a Toshiba service for a short health check partner!

    Hans Bye

  • What is the best video card for h8 1280t? Because it does not support 700s GTX :(

    I bought a GTX 770 and found HP does not update the bios to take account of the series of video card. TOTALLY LAME. In any case, what IS the best card video, the MB - t supported? (Pegatron ECA2) I have a 550 2 GB GTX OC now so I would like to move to something that is clearly visible to make it useful. Thank you.

    Hello

    HP released a list of HP OEM video cards that will work in the h8 - 1280t.  Look at these specifications.

    The HP h8-1280 is since over 2 years and I don't expect HP to post additional updates.

    If you are having problems with the graphics card no - HP OEM then ask the manufacturer of the video card for redress.

  • I'm having a problem with the email of comdast especially for the outgoing with SMPT. Does not recognize the user name or password. Erased and the exact same re-admitted and do a little work and now 2 - 3 times a week same recurrs either on iphone, ipad a

    In the last 6 months + / _ my Comcast email not send mail as the smpt said that the name and the password not recognized. I can delete them both and then re-enter on my iphone and ipad, imac and it works again. It happens now 2 or 3 times each week. Comcast.com my website does not do this and can receive and send email without problem. Their support, explains what's happening with many of their apple using the client.

    All the answers in the group. Has not happened before. This could be with apple's IOS dates as google is not not the case.

    pdeyedoc

    You should probably get a different email.

    I know this isn't much of an answer or even very applicable but everyone I know eventually loses their emails from mobile provider or cable operator sends cause unless you stick with them forever, your account is deleted after you leave them.

    Gmail, yahoo, rocket mail, and even AOL don't do that.

  • Acrobat 9 Standard comes with the scanner does not install

    My serial number for the grouped Acrobat 9 Standard is interpreted by Adobe as an upgrade.  I can not install without evidence of an earlier version - which, of course, I never had.

    The scanner is a Fujitsu fi-6230 (big machine).

    I have just upgraded to Windows 7 and need to reinstall Acrobat. Would prefer to save the expense of a full version - I thought to upgrade after installation of level 9.  But here I'm stuck on zero.

    All the words of wisdom would be appreciated.

    You can try to talk to Adobe Support by chat or phione to see if they can solve anything of it.

    Here is a link to a page with options to help make contact:

    http://www.Adobe.com/support/download-install/supportinfo/

    If the software is delivered with an upgrade serial number then your only hope is likely to be in contact with people from scan to see what happens with that.

  • Applications for Smartphones blackBerry with Wi Fi does not

    Hello

    I had T-mobile connection and data on the blackberry Curve 8900 phone plan. Finally I moved to the India and my phone was unlocked by T-mobile. Now my carrier is Airtel and I don't have a data plan with my carrier.

    When I try to connect my phone with WiFi, Internet works fine in browsers (both in Internet explore and Opera) but applications like gmail, facebook... do not work.

    For example:

    Gmail - Tunnel failed error

    Facebook - data not available error service

    OS V5.0.0.190 (Platform 5.2.0.11)

    Please someone advise on this... Thank you!

    OK, you need a data Plan for BlackBerry from your operator for the features and functions of BlackBerry.

    Some third-party applications like Opera Mini will work, and thus, your Hotspot browser will work with WiFi.

    You must have the data Plan, in order to get the push RIM email functions you are looking for, as well as services of BlackBerry data such as the Web browser, Facebook for BlackBerry, BlackBerry Messenger and much more.

    Then call your carrier and you learn about to have added to your account BlackBerry data Plan.

    Good luck.

  • Event ID 10016 - the application-specific permission settings do not local Activation permission for the COM with the CLSID server application

    Lately, I'm getting this system error a lot now that I've upgraded to Windows 8 Pro is an event DistributedCom 10016 ID. Here is the text of the error:

    The application-specific permission settings do not local Activation permission for the COM with the CLSID server application

    {D63B10C5-BB46-4990-A94F-E40B9D520160}

    and APPID

    {9CA88EE3-ACB7-47C8-AFC4-AB702511C276}

    the user NT AUTHORITY\SYSTEM SID (S-1-5-18) from the address LocalHost (using LRPC) running in the container of the application unavailable SID (not available). This security permission can be modified using the Component Services administrative tool.

    Anyone has an idea why I get this error?
    Walt

    Same thing here. Grayed. Windows 8.1 seems to fill the observer of events with many more errors than previous versions.

    Edit: OK, discovered why it is grayed out. There are 2 reg key, you must set permissions before going to the Configuration of DCOM in component services. The CLSID key and the APPID key.

    From another forum, although it applies to a different application, same principle:

    1. open Regedit.
    2. go in HKEY_Classes_Root\CLSID\ * CLSID *.
    Note: * CLSID * stand for the ID that appears in your event viewer error. In your case, it is {C2F03A33-21F5-47FA-B4BB-156362A2F239}.
    3. right-click on it and select authorization.
    4. click on Advance and change owner to administrator. Also click on the box that will appear below the threshold of owner.
    5. apply a full control.
    6. close the tab, then go to HKEY_LocalMachine\Software\Classes\AppID\ * APPID *.
    Note: * AppID * is the ID that appears in your event viewer. In your case, it is {316CDED5-E4AE-4B15-9113-7055D84DCC97}.
    7 right-click on it and select authorization.
    8. click on Advance and change the owner to administrators.
    9. click on the box that will appear below the line owner.
    10. click on apply and grant full control to the administrators.
    11. close all tabs and navigate to the administration tool.
    12. open component services.
    13. click on the computer, click my computer, and then click DCOM.
    14 find the corresponding service that appears on the display of the error.
    15. right-click on it, and then click Properties.
    16. click the Security tab, and then click Add a user. Add the SYSTEM and then apply.
    17. check enable local.

    Then use the relevant keys here and the DCOM Config utility should give you access greyed onareas:

    CLSID:

    {D63B10C5-BB46-4990-A94F-E40B9D520160}

    and APPID

    {9CA88EE3-ACB7-47C8-AFC4-AB702511C276}

  • After update laptop graphic card driver HDMI port does not not work and sleep mode disappers

    Mr President, I have buy a new computer laptop 15-e017tx after the update of the graphics card.

    • HDMI port does not when I connect the laptop to my led tv
    • In the windows operating system sleep mode is dissappers.
    • On the start menu, the language is Hindi

    There are problems am faceing now. How to solve this problem? Short films screen attach also the problem when I open the catalyst control amd.

    Hello

    As mentioned above, restoring Windows 8 will allow:

    http://Windows.Microsoft.com/en-AU/Windows-8/restore-refresh-reset-PC

    Good luck.

  • NB200-12N - USB port does not work

    Hello

    I updgrade my OS from windows 7 starter edition to now a windows 7 home basic 32-bit usb port does not work is the (only) in the left near card reader sd and lan.
    Can you please hellp me to install it? I have download the drivers from Toshiba for my NB200
    But does not work.

    Thank you

    Paulo

    If everything is OK and right drivers all USB ports should work. You cannot install the drivers for each port separately and force one of them to work properly. On this machine, all three ports are the same USB2.0 ports.

    Try reinstalling the chipset utility.

    By the way: two other ports work well, right?

  • HP 15-AF006AX: USB 2.0 port does not work

    Hello

    I installed window 7 in my new laptop, but the usb port does not work in the case of data transfer.

    and I am not finding a driver for this, can you help me for this problem

    Thanks in advance

    Hello:

    The only suggestion I can offer would be to settle the AMD Chipset drivers from the link below the problem.

    You want the first file on the Web page.  Install and reboot the PC.

    http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  • Get "key to upgrade is for the edition of windows that does not work with Windows Anytime Upgrade"

    The PC is running Windows 7 Starter.  I'm trying to upgrade to Windows 7 Professional. I bought the card from Windows Anytime Upgrade Key.

    When I entered the PK, error, "put key in level is for the edition of windows that does not work with Windows Anytime Upgrade"

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

    Additional resources:

    http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-windows_install/how-to-successfully-do-and-troubleshoot-Windows/47e1943f-8255-452A-a7ad-2ae14dc974af

  • 802. 1 x authentication port does not

    I have trouble to know what is happening here. I'm trying to configure 802. 1 x port authentication based to assign customers to a VLAN. I inherited this mess and his for a long time I used it. I ran a wireshark on the radius of my server and I see no same package from my IP address switch when I plug into a port (I checked communication because pings come in my trace)

    Pass the info:

    SW-ConfB > sho worm

    Cisco IOS software, software of C2960C (C2960c405-UNIVERSALK9-M), Version 12.2 (55) EX3, VERSION of the SOFTWARE (fc2)

    Port config:

    interface FastEthernet0/11

    switchport mode access

    authentication event failure action allow vlan 900

    no response from the authentication event action allow vlan 900

    Auto control of the port of authentication

    dot1x EAP authenticator

    dot1x tx-period 5

    The RADIUS server info:

    key acct-port 1646 1645 auth-RADIUS-server host 10.0.1.52 port 802.1 x!

    A little confused why not package Radius comes even from the switch. Any tips?

    According to debug it, it seems that the supplicant connected on the switch port does not support the dot1x and MAB is not configured on the switchport so no method left to try and you got the vlan COMMENTS.

    3 Mar 04:37:47.963: % AUTHMGR-7-RESULT: authentication result 'no response' of 'dot1x' for the customer (d4be.d907.9637) on the Interface Fa0/11 AuditSessionID 0A000103000000090B4AD0F6
    * 04:37:47.963 3 Mar: % AUTHMGR-7-FAILOVER: failover "dot1x' for the client (d4be.d907.9637) on the Interface Fa0/11 AuditSessionID 0A000103000000090B4AD0F6
    * 04:37:47.963 3 Mar: AUTHMGR-7-NOMOREMETHODS %: exhausted all methods of authentication for the client

    At this point, the RADIUS is not even came into the picture. Please make sure that the end customer is configured correctly for the dot1x parameters.

    Kind regards

    Jatin kone

    * Make the rate of useful messages *.

  • "Windows 7 Home Premium SP1 64-bit, an error message indicates" the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade.

    Tried using Windows Anytime Upgrade. Bought at Staples have product key is entered correctly. "Following instructions, accepted USA get error message says ' the upgrade key you have entered is for an edition of windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

    Which edition of Windows 7 is installed on the machine?

    Which edition of Windows 7 you are trying to do an Express upgrade to?

    Please note that the Express upgrade does not support OEM, MSDN-Academic, Volume (the student faculty licenses) license. If you are in possession of all these brackets, you will need to save and do a custom clean install. If you want to do it, please backup your Windows 7 Home Premium or according to edition currently installed. Some licenses for Windows distributed to tertiary level students are not perpetual, which means that you cannot continue to use the software after a course or graduating.

    ---------------------

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  • Error, "the upgrade key you have entered is for an edition of Windows that does not work with Windows Anytime Upgrade." Enter a different upgrade key. "When you try to upgrade to Windows 7 Ultimate

    I have Windows 7 Home Premium and bought a Windows Anytime Upgrade to Windows 7 Ultimate. After extraction in the online store, I got a download link and product key.

    However, when I try to run the Express upgrade and enter the key that I got from the online store, the operation fails and the window says:
    "The upgrade key that you entered is for an edition of Windows that does not work with Windows Anytime Upgrade. Enter a different upgrade key. »

    What should I do?

    Windows 7 Anytime Upgrade fails:

    If your getting the following: error: Windows Anytime Upgrade failed
    This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
    See: http://support.microsoft.com/kb/2660811

    = Other reasons and possible corrections.

    Windows Anytime Upgrade fails with the error:
    "every time that the upgrade has failed. Go online to solve the problem.
    http://support.Microsoft.com/kb/2658652

    If Anytime Upgrade still does not work:

    Shut down and restart your computer.

    Make sure that the Windows updates have been installed.

    Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

    If Anytime Upgrade still does not work, turn off the user account control:

    1. go in user accounts in Control Panel

    2 change user account control settings

    3. pull the slider to the level as low as possible

    4. restart the PC

    5. pass by the "Anytime Upgrade" as usual

    Try the following:

    1 disable any security software before attempting to upgrade

    2. make sure that your computer is updated (devices and applications)

    3. disconnect all external devices before installing.

    4. check your hard disk for errors:

    Click Start

    Type: CMD, according to the results, right-click CMD

    Click on "Run as Administrator"

    At the command prompt, type: chkdsk /f /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.

    User account control permission

    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the check box load startup items.

    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click on OK.

    6. When you are prompted, click on restart.

    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:

    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

    Who should I contact if I have problems installing and / or activation of my product key card?

    Please contact to the: www.windows7.com/getkeysupport.

    If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

    Learn how to install Windows 7 Service Pack 1 (SP1)
    http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

    If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
     
    HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

  • HDMI port does not work

    Original title: HDMI port stopped working after the update.

    This morning my laptop did an automatic restart to install updates and now my hdmi port does not work. I tried to restore the system to a previous point, but that has not helped. I have a HP Pavilion dv6.

    I worked with a team of online crash analysis and they had update me of the BIOS. That fixed the problem and the HDMI port is now working again. For those of you who have the same problem, go to http://ftp.hp.com/pub/softpaq/sp48501-49000/sp48953.exe .

    Update your BIOS can help you too.

Maybe you are looking for

  • Voice-over work is not on iPod Touch

    Hello I have a 5th generation iPod Touch 32 GB, A1421 and my VoiceOver option and 'talk' to the selected text do not seem to produce any sound. I checked the volume control, changed vote, passed to the voice of Siri (Siri works very well), but it sti

  • Buy iPhone at Apple Store in AbuDhabi

    Greetings, I intend to get the iPhone of Apple Store to AbuDhabi during my visit here, however, I thought that models sold it isn't Facetime/iMessage support. I wonder as I will buy it from there and use it in my home country, I'd be able to re - act

  • Jumping mouse and the number of speakers on Satellite Pro M70

    Hello. I have the Satellite Pro M 70 and I had trouble with the speakers, and also the mouse jumps quite assign! I re - install the drivers but it don t seem to work!Can someone help? The computer has also apparently Bluetooth is that correct? Or wha

  • Problem with Skype!

    I do not know if what is happening to others, but when I try to sign in to Skype (Windows 8 version) it says "Make sure that you have typed in your password or name of user and e-mail correctly." However, when I log in to change my settings in my bro

  • Installation of NOR-SCOPE 3.8.7

    Hello I have to install NO-SCOPE 3.8.7 to use a PCI 5105 high-speed digitizer. However, when I try to do, the summary of installation indicates that some features can be installed either because there is a more recent version installed (but it is not