Add/Remove Programs does not locate all my programs installed after the replacement of hard disk

Similar Questions

• Windows XP Add Remove Programs opens, but the list of programs will not appear?

  Windows XP Add Remove Programs opens, but the list of programs will not appear? Can check the programs add and romove, but when the next screen appears to list all installed programs nothing happens, it just says: waiting will list is bieng prepared, expected 15 minutes still nothing, never had this problem before. Thank you

  Alas...

  As the forums MS Answers does not prompt for any information system when a new question is asked, we know absolutely nothing about your system.

  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Click Start, run and enter the following command:

  regsvr32 appwiz.cpl

  Click OK and you should see a message like this:

  DllRegisterServer in successful appwiz.cpl

  Restart and see how things look now.

• Windows xp reportsThis device is not present, does not work properly or does not have all its drivers installed. (Code 24)

  in the device under the non-plug-and-play drivers Manager... it has a yellow question mark next to this "MpKslb71170d2" I have no idea what it is.

  the error code is 24 and is shown below

  Windows xp reports "this device is not present, is not working properly or is not all its drivers installed." (Code 24) »

  the choice, it gives me is to disable or uninstall... What is this error, what device, what should I do?

  Same computer as in this other thread of yours? -Online http://answers.microsoft.com/en-us/protect/forum/protect_updating/the-red-shield-is-on-my-microsoft-security/9243c546-aa6d-46cc-8780-2ac040a52e35

• Bytemobile kernal Network Provider this device is not present, does not work properly or does not have all its drivers installed. (Code 24) What should I do?

  Kernal Bytemobile network provider: this device is not present, is not working properly or is not all its drivers installed. (Code 24). What should I do about it?

  Hi Arthur,.

   
  You have made any changes to your computer recently?
   
   
  I suggest you to follow the steps and check if it helps.
   
  Method 1: Make a convenience store and check if it helps.
  Open the hardware and devices Troubleshooter
   
   
  Method 2: Updated check and network provider kernal Bytemobile if device driver that can help.
  Updated a hardware driver that is not working properly
   
   
  Method 3: You can check out the link and check if it helps.
  Explanation of error codes generated by Device Manager in Windows XP Professional
   
   
   

  Note: This link applies to Windows 7.

• Add a program installed in the Start Menu

  The Kindle for PC application appears pinned at the top of the Start Menu, but not in the menu below.

  I would like to "unpin" it but want to be able to access it from the Start Menu.

  The help file is no help.

  Sorry, there is a misunderstanding: you can put a program in the menu all programs.  I thought that you wanted to put in the box above that.

  If you want to put in the menu all programs, here's how:

  1. Click all programs and choose open
  2. Drag the icon into the folder that appears (as you say, it's like Windows 95/98)

  It should put there when the program is installed, but the Setup program takes this decision, some programs do not, others give the user a choice.

  For email alerts, can you check your profile page (here) and see if there is e-mail address listed correctly?

• Dreamweaver does not start when it is installed on the second disk

  Hello

  I recently installed Dreamweaver (trial version) on a second drive through creative cloud Manager.

  When I clicked on DW in the started program start, but got stuck.

  I tried to go in the installed folder and double click on DW, but it's the same thing.

  Then I clicked on DW to create Cloud manager and DW loaded without any problems.

  So why the program only started compared to the creative clouds?

  Platform: Windows 10

  Adobe Dreamweaver CC 2015

  Thanks in advance for any help.

  Thanks for all the help.

  I installed Dreamweaver on a second drive to save space on my SSD.

  I realized Cloud Creative manager to install on the second hard drive.

  After making that Dreamweaver is not started, I restarted my computer, and then everything has worked.

• Brightness (key or setting) setting does not work on HP Envy17 2290nr after the loading of Windows 8?

  After the upgrade to windows 8, why the brightness adjustment is no longer works on HP Envy17 2290nr?  Went to set the charms and brightness controls do not work here either.

  Hello DJSZCZEP.  I understand you are having some problems with control of the brightness of your laptop in Windows 8.

  HP is still drivers for the update for Windows 8.   Most laptops that have been purchased after October 1, 2011 must be supported at the time.  Here a link to more information on the upgrade to Windows 8 and HP.

  The support page for your laptop does not currently listed drivers for Windows 8.  This does not mean that Windows 8 does not work on your laptop.  This simply means that some features and functions may not be available. Advanced features like the brightness control can be handled by the driver itself and require a complete driver for features.  Your the tender specifications lists the video card like the ATI Radeon 6850 M.  Here are the drivers for the 64-bit version of Windows 8.  Try using these drivers and tell me if this solves the problem.

  Keep an eye on the support page of your product for updates, including drivers for Windows 8.  I hope it's useful.

• First Pro CS5.5.2 will not install after the replacement of the motherboard?

  First Pro CS5.5.2 will not install after replacing mothboard. It was running properly for 4 weeks before changing due to problems connecting AC and wireless connectivity.

  Adobe, case No. 183519673, Adobe engineers (Asia/Pacific) have worked on this issue for more than 3 hours with no result after uninstalling and reinstalling.

  Ideas for resolving the issue wou; LD appreciated.

  Also available at the section of material http://forums.adobe.com/message/4634472

  There is a new forum for download & install and installation issues

  http://forums.Adobe.com/community/download_install_setup

  Or, call Adobe

  In the United States - Adobe install problems 800-642-3623

  In the United States - Adobe Activation 866-772-3623 Open 24/7

  I offered to provide information of make and model of motherboard

  [Additional information about else added]

• How can I uninstall the old version of java 2 runtime environment (H.E. v1.4.2) when it is not listed in the Add/Remove Programs section in the control panel

  Java shows that I have an old version of Java installed.  I can't see to find this version anywhere.  I can't remove it, if I can't find it.  I looked in the Control Panel, under Java and everywhere else I could think of.  I removed something with the hotfix from microsoft, it shows the old version as Java installed on my computer.  Help!

  Try my computer, search, chk the box to search for files, search for downstairs,

  more options, chk boxes, search for system files, hidden files, etc. We could

  In addition, open C:, file open windows, scroll to the folder.

• MrtRate non Plug - and - Play driver displays the error message "this device is not working properly, or does not have all its drivers installed (Code 24)."

  Convenience store recommended remove and reinstall to resolve problems.  Cannot locate the driver using the Add Hardware Wizard to reinstall by troubleshooting tips.

  Do I need this driver for my Dell PC under Windows XP Home Edition SP 3 or if I can't ignore the deletion?

  If I need to reinstall the driver of mrtRate, where I can get it?

  Ganeles Hello death,

  Thank you for your message.  After studying this problem, it seems that it is caused by the Quicken software.  Click HERE and run through the troubleshooting process.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• G6 2312ax Pavilion: Pavilion g6 2312ax keyboard does not respond after the death of hard drive

  My laptop received disc hard failure two months and he died since then. I intend to change the hard drive of the laptop as soon as the order arrives in a few days. But now the problem is that as if now the keyboard of my laptop does not respond. So I would like to know if this problem will be resolved after the replacement of hard disk or is related to the software / operating system of your laptop?

  Help, please...

  Sorry I couldn't answer yesterday.

  The update, is that when I tried to turn on the laptop as well by pressing the ESC. The laptop did not respond initially but then responded in the end, but after that, there is no answer.

  Now Mr. President, I would like to know your end on this issue?

  Thank you

• Windows Vista not reponding: Windows Installer, Office 2007 (Outlook), add/remove programs, System Restore, etc...

  Gentleperson,

  I am looking for a solution fix my PC, HP Pavilion Slimline. Windows install Office 2007 (Outlook), add/remove programs and the system restore will not work. The apparent problem is a file corrupted in the system, based on the forums of Windows and Office 2007 and published articles.

  I tried the following:

  • Retore system Mode safe mode and in Safe Mode network - without success
  • In Normal Mode Windows Vista will not respond to the system restore or the Add/Remove programs - without success
  • Chkdsk/r - unsuccessfully
  • sfc/scannow won't answer - no success
  • Msconfig.exe helped with a clean boot; However, this does not solve the problem...
  • Windows Installer is in auto status, but can not start; I have a 1053 error messsage... too slow

  As it can be seen, there is a problem with my operating system. I have a recovery disk to format my PC in its original configuration. However, I have not saved my files that I won't lose to the formatting. Please advice.

  Thanks in advance,

  Lhorea

  I have general thing is you did not run memory diagnostic
  (% SystemRoot%\system32\MdSched.exe).
   
  You can try the recovery prompt environment SFC. Startup type
  Repair in Help and see
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista
   
  --
  ..
  --
  "lhorea" wrote in message news: 2a55a4d8-3acb-4b2d-9322-2756d47a5808...
  > Gentleperson.
  >
  > I am looking for a solution fix my PC, HP Pavilion Slimline. Windows
  > Installer, Office 2007 (Outlook), add/remove programs and restoring the system
  > will not work. The apparent problem is a file corrupted in the system,
  > on the forums of Windows and Office 2007 and published articles.
  >
  > I tried the following:
  >
  > a.. Retore system Mode safe mode and in Safe Mode network - without success
  > b.. In Normal Mode Windows Vista will not respond to the system restore or
  > Add/Remove programs - without success
  > c.. Chkdsk/r - unsuccessfully
  > d.. sfc/scannow won't answer - no success
  > e.. Msconfig.exe helped with a clean boot; However, this does not resolve the
  > problem...
  > f.. Windows Installer is in auto status, but can not start; I get a
  > messsage error 1053... too slow
  > As it can be seen, there is a problem with my operating system. I have
  > a recovery disk to format my PC in its original configuration. However, I have
  > not backed up my files that I won't lose to the formatting. Please
  > advice.
  >
  > Thanks in advance,.
  >
  > Lhorea
  >
   
   

• Withdrawal of obsolete lists in the Add/Remove program list?

  I'm working on the clean-up of an older system running Windows XP Pro. The system has two hard drives... whose the second crashed and burned in a fatal way. Software that has been installed on the second drive hard disappeared and is not installed on the replacement drive. The problem this presents, although perhaps minor but annoying, however, is that programs that were on the second disc appear on the Add/Remove Programs list, accessed via the Control Panel, even if they are no longer really exist on the system. Is there a good way to clean the list add/remove program entries for programs that have been lost and never be recovered due to a failure of hard drive like that? Also, are there any other proceedures recommended to clean all traces of system programs that have been lost in this way? Try to remove the traces of these programs using the Add/Remove list does not of course because the entries in the list of reference locations and files that no longer exist.

  Thank you.

  I'm working on the clean-up of an older system running Windows XP Pro. The system has two hard drives... whose the second crashed and burned in a fatal way. Software that has been installed on the second drive hard disappeared and is not installed on the replacement drive. The problem this presents, although perhaps minor but annoying, however, is that programs that were on the second disc appear on the Add/Remove Programs list, accessed via the Control Panel, even if they are no longer really exist on the system. Is there a good way to clean the list add/remove program entries for programs that have been lost and never be recovered due to a failure of hard drive like that? Also, are there any other proceedures recommended to clean all traces of system programs that have been lost in this way? Try to remove the traces of these programs using the Add/Remove list does not of course because the entries in the list of reference locations and files that no longer exist.

  Thank you.

  Download ccleaner from piriform. Click Tools > uninstall. Highlight the entries that appear, but is really installed. Then choose Delete. Reformatting is an extreme measure for a simple issue resloved. Regarding running the ccleaner registry cleaning tool, that I personally used for several years without a single incident. This does not apply to all the registry tools however.

  CCleaner - home

  It is also a trustworthy tool.

  Glary Utilities | GlarySoft

  Free computer support and diagnostics-->> http://repairbotsonline.forumotion.com/

• deleted programs manually always appear in the list, add/remove programs

  I have a large number of programs I uninstalled, but they still appear in Add/Remove program with the button Delete. Using the button Delete has nothing else that wasting time by telling me that he was unable to find the components. I went to the registry editor and manually delete all programs. I then checked the list Add/Remove programs and programs have disappeared. Then, I closed the registry editor and check the Add/Remove Programs list. The programs appear once more, this time without a button Delete. When I go back to the registry editor, the programs have disappeared. How to make them out of the Add/Remove Programs list?

  That all sounds pretty messed - too bad you took this approach.

  It is also a pity that forums MS Answers does not ask for any information system when a new question is asked, so we don't know anything about your system.

  Some people have good luck with the free version of Revo Uninstaller.

• Remove programs that don't let you do it from the Add/Remove programs in XP screen

  I am running Windows XP.  A week or two ago while logging into my account, the program Sonic Record now kept wanting to connect to update.  However, when Sonic Update Manager was trying to "collect data" it gave an error that the network does not work (I'm not on a network).  Anyway, I got feed with this and tried to remove the program under the screen XP Add/Remove programs.  The program is there, but when you click it, it will not bring up the screen so you can remove it.  And I went to programs on the C:\ drive and deleted the folder of the program did a reboot.  No luck.  The Sonic program always tries to use the Manager to update.  Also, I tried to reload the program using the disc that came with the computer when I bought it.  I get a message saying essentially that I need to remove the current program first.  However, the program Sonic record has already been deleted.

  What I do next and how remove a program in Add/Remove Program screen, after clicking on the program, it won't bring the option to remove?  Any help would be appreciated.  Thank you very much.

  Try to remove with this tool.
   
  Revo Uninstaller
  http://download.CNET.com/Revo-Uninstaller/3000-2096_4-10687648.html