Add the host to the cluster vmware and SAN equilogic

Hello...

I will add 2 new for our cluster vmware vsphere host... I have not done this before, but think that I got the hang of it...

But one thing that I am uncertain the San connectivity, is it just to create the map of iscsi on the vsphere host software and then add the adapters iqn name to access the San volumes page and rescan for the accessible volumes in the vmware host?

That's about all.   Reported Tech on how to do so expressly.

en.community.dell.com/.../TR1075-Configure-iSCSI-Connectivity-with-VMware-vSphere-5.pdf

TR1091 shows how to configure VMware ESXi for best practices with storage EQL.

en.Community.Dell.com/.../Download

In my environment I use CHAP credentials for clusters of ESXi.  In this way a specific set of ESXi nodes use the CHAP username/password to access EQL volumes.  Advantage is when you add a new node, you only need to provide the name of user and password c.  You will not have to change anything on the side of EQL to add/remove a node.

Kind regards

Tags: Dell Products

Similar Questions

  • Add the cluster to an existing table in oracle

    Is it possible to add the cluster of an existing table? For example...

    I have a table:

    CREATE TABLE table_name)

    t_id number PRIMARY KEY,

    t_name varchar2 (50));

    Cluster:

    CLUSTER to CREATE my_cluster

    (c_id NUMBER) SIZE 100;

    Y at - it a command such as: ALTER TABLE t_name add CLUSTER my_cluster (t_id); or something like that?

    Because I want to table to look like this:

    CREATE TABLE table_name)

    t_id number PRIMARY KEY,

    t_name varchar2 (50))

    My_cluster (t_id) CLUSTER;

    And drop all the tables isn't really what I want to do.

    Thank you

    No,

    It is the reverse:

    A table can be stored as a segment of memory (the common way) or in a cluster.

    Will not be part of the table "in the cluster", but other parts outside.

    Please create a new table in the cluster and insert your data here.

    Sorry,

    Martin

  • How to configure the agent to monitor performance only the vcenter vmware and esx, not need to monitor virtual machines

    How to configure the agent to monitor performance only the vcenter vmware and esx, not need to monitor virtual machines

    This is not possible with the way in which we collect information.

  • How to add the chapter name and page not for reference

    Hello

    How to add the chapter name and page not for reference in indesign CS6.

    Thank you

    Please try variable notion of text

  • What is the cluster node and which is a member of the cluster?

    What is the cluster node and which is a member of the cluster?
    How to differentiate them?

    I agree with you all.
    But note that a node is a server JVM. A large number of nodes can co-locate in the same machine. Entire application process or the server that is running software consistency is called a cluster node.
    But Member and the cluster node is different concepts. Consistency is logically divided into clusters, services and caches. A cluster of coherence is a group of cluster nodes that share a group address, allowing you to communicate, the cluster nodes. Generally, a cluster node will join only a single cluster, but it is possible for a cluster node to join (membership) several different groups, using a different group for each cluster address.

    Fran

  • Base - Add the user name and password in script?

    Hello

    Scripting is not my thing, I run the script below in order to get the use of the data store space and it requires user name and password for vcenter, how do I add it in the script, then I can run as a scheduled task on my Windows Server that has installed PowerCli?

    # These are the properties assigned to the table via the ConvertTo-HTML cmdlet.

    $tableProperties = '< style >.

    $tableProperties = $tableProperties + "TABLE {border-width: 1px;}. border-style: solid; border-color: black ;} »

    $tableProperties = $tableProperties + "TH {border-width: 1px;}. padding: 5px; border-style: solid; border-color: black ;} »

    $tableProperties = $tableProperties + "TD {text-align: center;} '. border-width: 1px; padding: 5px; border-style: solid; border-color: black ;} »

    $tableProperties = $tableProperties + ' < / style >.

    ##The script will automatically connect to the server if necessary. The $server variable must

    #be changed if the server name changes.

    $server = "192.168.132.1".

    If (!) () to connect-viserver $server - ErrorAction SilentlyContinue). IsConnected)

    {

    Write-Host "connection to the server: ' $server

    to connect-viserver $server - ErrorAction SilentlyContinue err - ErrorVariable

    If ($Err)

    {

    Write-Host "Connection to the server error, please check server name." - ForegroundColor Red

    breaking

    }

    Write-Host "Full" - ForegroundColor Green

    }

    # cmdlet to retrieve information from data warehouses.

    # variable $rep stores all the information for each data store.

    $rep = @)

    Get-Datastore. Sort-Object-property name. {ForEach-Object

    $Datastore = $_

    $Report = "" | Select-Object - property Datastore, CapacityGB, FreeSpaceGB, PercFreeSpace

    $Report.Datastore = $Datastore.Name

    $Report.CapacityGB = [math]: tour ($_.) CapacityMB / 1 KB, 0)

    $Report.FreeSpaceGB = [math]: tour ($_.) FreeSpaceMB / 1 KB, 0)

    $Report.PercFreeSpace = [math]: Round (((100 * ($_.))) FreeSpaceMB)) / ($_.) (CapacityMB)), 0)

    $rep += $Report

    }

    # Formats date, file name, etc. #.

    #Write - Host "Generating report".

    $date = get-date

    $datefile = get-date - uformat ' %d-%m - Y % - hour %M ' %S

    $filename = "C:\vmware\powercli\reports\VMwareDatastoreUsage_" + $datefile + ".htm".

    # Generates vsphere datastore usage report #.

    Write-Host "Full" - ForegroundColor Green

    Write-Host "Generating datastore usage report".

    $rep | Sort PercFreeSpace | ConvertTo-HTML-head $tableProperties - body ' < th > < font style = ' "color: #000000 '" > < big > < b > VMware Datastore using < /b > < / big > < / font > < /th > | Out-file $filename

    Write-Host "Full" - ForegroundColor Green

    Write-Host "usage of your data store report has been saved to: ' $filename

    ##Send email with attached generated report #.

    #Write - Host "sending email with report:" $filename + "attached".

    Send-MailMessage-to "vmware-reports < . " [email protected] >"-subject 'vSphere datastore use' - to ' Andy White < [email protected] > "-body" VMware report attached: use of the data store "- attachment $filename - high - dno onSuccess, onFailure - smtpServer 192.168.13.3

    The connection is made in this line

    SE connect-VIServer $server - ErrorAction SilentlyContinue err - ErrorVariable

    You can add the user and password parameters of the cmdlet Connect-ViServer . But you want to have this info hardcoded in the script?

    An alternative is to use the credentials store.

    There are other alternatives to store the credentials.

  • Removing servers still have the cluster database and agent status 'pending '.

    Enterprise Manager 12.1.0.2

    We have recently decommissioned 3 servers that were part of a cluster.  Servers and their agents are gone.

    Em, I deleted the nodes in the cluster, removed the hosts and all of its objects.

    A node is gone, two left.

    I have 'cluster of databases' which show the status pending.

    I have 2 principles that show too inaccessible.

    I tried to delete these courses, which all but no luck. Any suggestions?

    This code still works?

    Start

    mgmt_admin.cleanup_agent('agentname:port');   commit;

     -mgmt_admin.delete_target_internal ('agentname', 'official');   commit;

    end;

  • I added a few. WAV files and you want to add the artist names and album

    I added a few. Recording WAV files form a USB turntable.  How can I add the name of the artist and album in iTunes before you convert them into MP3 files to load on a player MP #?

    For all types of files you can call by clicking on the location of the name / artist, when it is selected. It should be more when you convert the.

  • How can I add the cc addresses and British Colombia on a list of address book?

    I try to add a distribution list to my address book. Some beneficiaries should be cc would be and some should be bc had. I don't see any option for this project.

    If you are referring to a mailing list, you will need to create separate lists - one for the CC recipients and the other on the CCC. In the entry window, press F9 to show the sidebar of Contacts, select a list, and then click Add to Cc or Bcc adds.

    You could also add a list using AddExpandedList and change the format of address for the selected contacts.

  • Certificate expired on a server that has only the client VMware and VMware workstation

    Our scanners detected security certificate expired vmware on a server. The only products currently running on this server are VMware workstation and the vSphere client. I looked in all the installed certificates and their lack of vmware. When I open a web browser and go to the IP address of servers using port 443 I get a message of invalid certificate and look a certificate it shows expired recently, and was published by VMware. Where can I find this certificate and what is used to indicated the products installed on this system?

    The certificate was for workstation server configurations (connection sharing VMs/Remote). Just disabled the sharing feature because it is not used.

    Find the certificate in the program data-file VMware. Could not find information on renewal, only how to replace it.

  • Add the Cluster name to the report

    Hello

    How could I add the name of the Cluster to the next report?

    Get-Datastore - VM $vm |

    Select @{N = "DataStore"; E={$_. Name}},

    @{N = 'The virtual computer name'; E = {$vm. Name}}

    The release of the report would be Cluster DataStore, VM, etc..

    Thank you

    Something like that

    Get-Datastore -VM $vm |    Select @{N="Cluster";E={Get-Cluster -VM $vm | Select -ExpandProperty Name}},    @{N="DataStore";E={$_.Name}},    @{N="VM Name";E={$vm.Name}}
    
  • Add the same header and footer to all of my reports

    Hello

    I wonder if someone could help me please.

    I have to add the header and footer even at 52 reports and I wonder if there is a way to do so I don't have to repeat the same things each time
    I use reports 10g

    may thanks in advance
    Ana

    Perhaps Chapter 16 "customization of reports with XML" in "Report Services of Oracle® Application Server, publishing reports on the Web, 10 g Release 2 (10.1.2), B14048-02"can help you."
    Walter

  • Online to add the dimension member and refresh Essbase

    We have a budget request that requires adding new members to the entity on the fly and hope that we can avoid the services because of the Essbase database refresh time.

    No workaround can do that?

    Thanks for your advice!

    I wish I could tell you it was something I came up with that, but my ego will have to take the...

    Create oh, 30 members in a dimension requiring members. Here are the members of your add-on-the-fly.

    Do not put any data in them.

    Modify your form to delete missing.

    Create a HBR that can users to launch which allows an allocation of 1 member in a combination of members not used (garbage account, BegBalance, whatever).

    Put in a RTP that allows them to enter 1 to the Member (use of the RTP scope definition in HBR member limit to your new 30 members).

    Now you have a form that displays your new Member because deleting missing no long don't delete NewMember n . (You can hide the column that contains the 1 or something else that defines the data.)

    Put a text field of planning on the form allowing the Scheduler to add the name of the Member (add another alias, if you care to).

    In the night, run an ODI (or DIM or HAL) process that extracts the text value, it is up to the Member, and then builds a dimension.<--Okay, this="" bit="" i="" actually="" came="" up="" with,="" the="" rest="" i="" think="" i="" first="" heard="" from="" john="">

    Complicated, isn't this it? The last piece with ODI could be replaced by a human process that follows the text field (or the text in the cell) and the dimension built manually with a refreshment during the night.

    Workforce planning issues (not this one, but similar to) like this through SmartLists galore, but they are difficult to realize as metadata becomes data.

    Kind regards

    Cameron Lackpour

  • How do I add the button refresh (and others who no longer) to the toolbar

    All of my favorite on the toolbar items disappeared... autofill, refresh, etc.

    Firefox 4 and later versions use a combined Stop/Reload/Go button that is placed at the right end of the address bar.

    During the process of loading page it shows as a stop button and once the charging button is replaced by a reload button.

    If you type in the address bar this button would then become a button go.

    Click the Reload button to duplicate the current tab in a new tab.

    To move the buttons Stop and recharge in the position to the left of the address bar, you can use the following steps:

    • Open the Customize via "view > toolbars > customize.
    • If the menu bar is hidden on Windows or Linux use "Firefox > Options > toolbars."
    • Drag the buttons Reload and stop at their previous position to the left of the address bar.
    • Set the "Reload - Stop" order for a combined "Stop/Reload" button.
    • Set the order of 'Stop - Reload' or separate them otherwise (space or separator) for two separate buttons.
  • How can I add the menu, toolbars, and the favorite bar to my home page accessible by the icon on the IE start page?

    MY IE 10 icon on the start page takes me to my homepage at yahoo.com that appears without toolbars, favorites bar etc.  The IE icon on my desktop takes me to the home page with menus, toolbars, etc.  How to set IE 10 in the start menu to show me all top of page yahoo?

    When you have Internet Explorer selected as your default browser, it's start screen pinned tile will launch the modern-Interface version of Internet Explorer. Your favorites are always available in a right-click by pressing Windows key + Z or swipe at the top of the bottom of the screen. This reveals the open tabs and the address bar. Clicking / tapping on the address poster bar so your sites favorite and pinned. Toolbars and addons are not available for the user interface modern Internet Explorer. Any page or the session you are viewing in the modern-UI browser may be transferred to the desktop version using the key button in the app bar.

Maybe you are looking for