Add the second environment

Similar Questions

• Available to add the second internal hard drive to 17-e117dx

  Hello

  Can you let me know, if there is provision to add the second internal hard drive for HP Pavilion e117dx 17.

  If so, one) is there requirments or the specifications of the hard disk (any make or model); (b) what equipment will be needed and where I can get to and c) Finally will be doing so make sure the warranty of my laptop HP Sub

  HP Pavilion

  Product: F9J38UA #ABA

  Model: 17-e117dx

  Thank you

  Not in the way you probably do. Here is the Service Manual:

  Manual

  See Page 50. Unlike the Envy 17 and Pavilion dv7, Pavilion 17 has that a single hard drive Bay. The only way to add a second hard drive is to remove the DVD (optical drive) and insert a DVD to the hard drive bay adapter. The manual shows how to remove the DVD player and you can buy the adapter at amazon.com or jacobsparts.com. Note that this is a 9.5 mm thick disc, not a 12.7 mm. Both types are available. I do not recommend the adapter DVD player solution because you lose the use of the optical drive, and also because the interface of optical drive is usually not as fast as the main hard drive interface. Always fast enough for simple storage and you can run a video of her, but you do not want to edit the video of this disc, for example.

  https://www.jacobsparts.com/items/HDDBAY-02/

  If you decide to go the route of adapter DVD I would buy a large capacity 5400 RPM SATA 2.5 inches wide and drive hard thickness 9.5 mm. No sense in buying a reader more expensive high-performance.

  http://www.Newegg.com/product/product.aspx?item=N82E16822178006

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Advanced conditional action does not work when I add the second condition

  I use CP 8. I can't understand why I'm running on this problem. I have a series of If-Then conditional actions, but I am running into problems. I narrowed down it to this problem.

  It is a simple check box that must show either the box or not.

  

  As long as I have only one condition, it works fine. As soon as I add the second condition, it stops working.

  

  Any suggestions? I appreciate the help!

  Rick and I tried to explain that a conditional action is always executed completely. This is the reason that the second decision has been reset what had been done in the first in your first question. I have a lot of articles on my blog where I point out that bad sequence in the decision (or) is causing most of the problems with conditional advanced (shared) actions.

• Add the second NETWORK card to vSwitch

  I'm working on trying to add to install a second NIC physical to the vswitch which is installed by default when ESXi. I use the code below, but when I run it, it disconnects in fact the main physical network card and of course, I then lose connection. I tried different varients of this and even finished by adding a port of vmk, which I didn't do. I just want to add the second network card as a standby card network.

  #Add second NIC to the virtual switch
  $nic = Get-VirtualSwitch -VMHost $currentHost -Name "vSwitch0"
  Set-VirtualSwitch -VirtualSwitch $nic -Nic vmnic1
  

  The cmdlet Set-VirtualSwitch accepts a string array as the value of the parameter - Nic. So you should be able to:

  #Add second NIC to the virtual switch
  $nic = Get-VirtualSwitch -VMHost $currentHost -Name "vSwitch0"
  Set-VirtualSwitch -VirtualSwitch $nic -Nic vmnic1,vmnic2
  

  Best regards, Robert

• Add the second server to

  I know this may sound like a matter of "DUH"... How can I add a second server to my closed vWorkspace?

  Currently I have a RDSH server with vWorkspace 8.0 on it (running Win Serv 2008 R2)

  I have a need to get a Server Terminal Server 2003 32 bit in the mix and want to publish an application from THIS server.

  I got it when I connect to AppPortal it shows the application of the 2K 3 server. However, I have some Terminal servers error message; However, AppPortal will launch applications on the original Server vWorkspace

  Hi Mike,.

  If you know the password you used then the remaining details can be found by running the tool ODBC Admin on the Windows Server 2008 is configured correctly. You can use this to look at the correct settings without making any changes. There is no default value as such since the database server and database name are specific to your environment.

  Concerning

  David

• Call "HostNetworkSystem.UpdateVirtualSwitch" for the error of the object when you attempt to add the second NETWORK card

  Hi there - first post here, so please be nice :-).

  We are just trying to place an ESX4.1 own deployment in our environment (no previous installation of VMWare) to our main office, using Dell M610 and blades blades M600 to what would become our DR - two sites site hosting VMS on Equallogic iSCSI SAN disks.

  I configured 4 of our blade M610 with ESX 4.1 successfully and they work very well.  These blades have double NIC onboard, and after the initial installation of ESX, I could go to the virtual switch and add in the second NIC like vmnic1 (because one had already been detected during installation).  This fine workd for 4 guests on the M610 blades.  However, I came today to make my first installation on one of the old M600 blades and I encountered a problem.

  Installation went without any problems and I was able to add the host in my vCenter.  I can change all the settings without problem (created the Port of VMKernal for my connection to SAN iSCSI etc, but as soon as I try to add in the second NETWORK card, he paused for a while, and then I get the following error message:)

  Call 'HostNetworkSystem.UpdateVirtualSwitch' of object 'networkSystem-56 "on vCenter Server"VCEN01." ournetwork.local"failed. (network name has been changed for post).  When this happens, it locks up again for several seconds, and when the system returns, I can no longer communicate with the ESX host (Observer of events in vCenter watch 'host is not responding' and I find that I can not ping the host unless I reboot it.)

  If anyone has any suggestions I would appreciate it that I don't want to proceed down to the line with our Installer if theres an underlying issue and I need to redo everything.

  Concerning

  EFIN.

  Do you get the same error when you try to add the network adapter by using the command line?

  1. esxcfg-vSwitch - L vmnic1 vSwitch0

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• Is it possible to add the second cooler to my QOSMIO

  I WOULD LIKE TO ASK IF IT IS POSSIBLE TO ADD THIS SECOND COOLER TO MY LAPTOP * (TOSHIBA QOSMIO - X 300 130) BECAUSE MY LAPTOP SHUTSDOWN WHEN I PLAY GAMES...
  * PIC ALL WHAT I want TO SAY... * http://www.irisvista.com/tech/laptops/Toshiba-Qosmio-X305/big/removing-laptop-motherboard-33.jpg

  AS I HAVE SEE YES BUT WHERE CAN I FIND ONE SUCH COOLER IN YM (BULGARIA)
  EVRYTHING STILL IN WARRANTY

  Post edited by: aloushi

  Hello

  No, it s not possible to add a second cooling fan to the motherboard notebook from the motherboard layout allows and the laptop does not have such extra part.

  But you can test some buffers cooling like this:
  [Photos of cooling pads: http://www.google.de/images?hl=de&q=cooling%20pads&wrapid=tlif130302876 790621 & um = 1 & ie = UTF-8 & source = og & his = N & tab = wi]

• Is it possible to add the second graphics card for this model Y510p?

  I've been doing mixed responses from customer service chat lenovo so I'm posting my question here. Recently, I bought this laptop. It comes with a single graphics card. I heard this model has ultrabay and you add another graphics card. My question is - is it true that you can add a second graphics card in this system by using ultrabay? Please let me know. I'm confused if SLI and ultrabay means the same thing. If this is the case, then this system is not sli. I appreciate your help.

  http://shop.Lenovo.com/us/en/laptops/LENOVO/y-series/y510p/?SB=:000001 C 9: 00011E0A:

  Also, don't forget to find the extra $20 or sometimes $50 discount code for the Lenovo y510p and apply it to the Fund. The time I bought my laptop I used the code USPY5168320, you will find a similar code if this does not work.

• Add the second disc

  I can add a second drive in a HP ENVY 17-J190NB

  Best regards

  lucvg

  Yes, and here is the part you are looking for:

  http://www.newmodeus.com/shop/index.php?Main_Page=product_info&cPath=2_5&products_id=542

  Here is a video showing how do:

  https://www.YouTube.com/watch?v=wx3dMGXrGCc

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Add the second hard drive to HPE-400Z

  I am trying to add a secondary hard drive to expand the storage space that I only have 10% of free space on the current.

  "Will buy one online" Seagate Desktop drive HARD 2 to 7200 tr / MIN SATA 6 Gb/s 64 MB Cache 3.5 "-drive retail Kit internal (STBD2000101)" enters the cage OK? Existing drive is Seagate 1 TB guess so, but do not get it and discover it doesn't work.

  This disc has new SATA data and power cables.

  It is clear that there is a free connection of motherboard "SATA2" for data, I can see it. Sounds easy.

  What I can't understand is where and how the POWER cable is connected to... or what might be able to be used which already exists for power connectors in the office. There is a certain and they all have beautiful marking... "P3,"P8",...".

  I found instructions on installing hard drive on HP site... everything is clear for me except for this problem of power cable.

  Did he help me with that?

  GWRootjr, welcome to the forum.

  This is an adapter 'Y' which should solve your problem:

  http://www.Walmart.com/msharbor/IP/24359037?wmlspartner=wlpa&adid=22222222227017782207&wl0=&WL1=g&WL2=t&WL3=40881390152&WL4=&wl5=PLA&wl6=78811224272&Veh=SEM

  You can connect a SATA power cable to do two on one.  This will allow you to connect the second HDD.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Add the second drive to ATC - 780

  I just purchased an ATC-780-UR61 with a 2.5 ssd "standard that I would add as a second disk as the startup disk and use the disk of 1 TB for storage. Now, I understand that there are only 2 SATA connectors on the motherboard - the one used by the 1 TB drive and 1 by the dvd player.

  Is it possible to add a second drive on this PC? I read some other models have a m2 connector to add a ssd drive to, but I don't see any documentation that the ATC-780.

  I can confirm:

  NGFFM1 m2 SSD connector

  It is on the right side of the motherboard near the SATA 2 ports.

• Add the second hard drive to a desktop Pc HP Pavilion P6-2100

  I want to add a second hard drive to a HP Pavilion A1700n Pc desktop to a new HP Pavilion P6-2100 Desktop Pc, so I can transfer files.

  milehisb,

  Welcome on the user forums.  Section manuals PDF from HP did not offer a guide to upgrade and Service.

  There are several options, depending on your needs and your expertise with the internal components of a computer.

  If you goal is to simply get the data off the drive, then put it back in the A1700n, I would use #1.

  (1) use this external adapter for occasional use:http://www.newegg.com/Product/Product.aspx?Item=N82E16812232002

  (2) first search to find if you have a spare Sata power plug. Or you will need an adapter (molex 4pin to Sata).

  http://www.playtool.com/pages/psuconnectors/connectors.html

  http://en.Wikipedia.org/wiki/Serial_ATA

  As the player in question is VIsta, it does not start correctly and could delay the start of WIN7.

• SX80 xcommand to add the second call

  Hello

  Everyone was able to add a second appeal in a call using xcommands and merge the calls?

  Thanks for the help

  Andrew

  Hi André,.

  I tried a few days ago on the SX20 in my laboratory using the following command and it worked

  xCommand call Join

  Manish

• Adds the second SCSI controller & change the SCSI ID numbers?

  Hello

  I have a need to add a couple of SCSI drives to my VMware Workstation VM (v10), and these drives need the SCSI ID of 1:x (i.e. who need a second controller).  Could someone give me some advice on the .vmx necessary parameters for this?  I looked at a few posts - which says that I must just add the readers in the UI, then change the SCSI ID in the .vmx... but it does not work.

  Any help is appreciated...

  Cheers, James

  You will need to should not change at all .vmx file to achieve this.

  Once you've added the hard drives on the virtual machine, click the Advanced button in the lower right of the settings of the Virtual Machine window.  The Virtual Device Node labeled popup should allow you to move the virtual hard drives SCSI 1:0, which will give you a second card SCSI.

  --

  Darius

• Try to add the second DC to vCenter instance.

  All the:

  I am sure there is a way to add a second "Datacenter" in one instance of vCenter, when the second domain controller is managed by its own server vCenter. Our current situation is that we have two physically separated data centers, both running vSphere 5.0. We would like to make sure he say for example my vCenter instance can see the other DC and its resources, but that stay DC managed the instance of vCenter that is local, not mine.

  Is this possible? I forget something here? I have no problem creating the DC object, but when you add to this the host domain controller, he lets know me that they are currently managed by another instance of vCenter...?

  Thanks in advance for the help.

  Thank you.

  Sounds like Modes related.