Add wireless 802.11 g at Satellite 1130

Similar Questions

• Slow wireless 802.11 g with Satellite M40X

  With the Toshiba on 802.11 wireless b is not a problem at all. When you connect to a 802.11 g, it does not work.
  The connection works fine however the Exchange with internet on 802.11 g is very low speed.
  When the connection to a modem in Group b the speed remains stable at 11Mbits when connected to a modem with band g the connection is successful, however, the speed is only for a few seconds at 54 Mbps speed down to 1Mbit exchange and internet is very, very slowly.

  I tried this with two different modems in Group b and the other in Group g. My Toshiba M40X and a desktop computer equipped with a SWEEX Wireless USB, using also two different computers.

  The office with SWEEX glue works fine on two modems while the Toshiba only works very well on the b band modem

  Any idea?

  Chris

  Hello

  It seems that you are using the minPCI card Intel 2200 wireless b/G LAN.
  I noticed several problems with the WLan card and especially the driver update has solved the problems. Visit the Intel site and download the latest driver.

  You posted something about two modems (B and G). Have you also tried to use the WLan card only with 802.11 B status or 802.11 G?

  In the WLan card properties, you can choose B, G or both together. Check it out.

• Satellite 1130-Z23 W - Lan Card installation

  Hello!

  I have a wireless Mini PCI as my Satellite 1130 - Z23, now I have 2 wires, one black and one white. I put in the map to the right on the map.

  What ist the right for to THE and the right one for the HAND?

  I can just confirm that. As far as I know white cable be connected to the HAND and the black to the auxiliary voltage

  Good bye

• Card wireless network for Satellite 1130-z24

  I just bought a 2nd hand TOSHIBA SATELLITE 1130-z24 portable

  What wifi card can I use with it.

  Hello

  As far as I know the laptop supports a Wlan miniPCI slot.
  So in this case, you should be able to use miniPCI WLan card that supports the 802. 11b standard Wlan.

  For example Wireless LAN Mini PCI card (2, 4 GHz, 802 11 b) PA3212U-3MPC should be compatible!

  See you soon

• East - Satellite 1130 has a wireless capability

  Hello

  I have a 1130 Satellite which seems to have wireless capability, but I don't know if he has an installed card.
  Can someone tell me how to say and offer advice on the type of acquisition card if he doesn't?

  I have a switch wireless on the left side, but go off to makes no difference, also have an icon wireless Fn (F8), which again seems to make no difference.
  I downloaded the user guide that shows the underside with a compartment for a socket wireless lan - what am I looking for here?

  Be nice to me and speak slowly!

  Thank you
  Mick

  Hello

  The WLan on the Satellite 1130 is optional.
  Some of the Satellite 1130 units were equipped with the internal LAN card minPCI and a few laptops were not equipped with a WLan card.

  If you want to know if your computer supports one then go to Device Manager and check the area to network adapters.
  Should there have listed a LAN and WLan card card (if available).

  See you soon

• Satellite L455-S5045 laptop Realtek8187B wireless 802. 11b / g connects to a d-link router, but not internet access.

  PC laptop Toshiba Satellite L455-S5045, Realtek8187B wireless 802. 11b / g connects to a d-link router, but not internet access. go to google.com and States page cannot be displayed, I ran diagnostics and reports, everything is configured properly. the wireless signal that d-Link has is 802.11n with a WiFi Code and running XP, I have WIN 7. Do I need to driver 802.11n, if I do, why I can not download it

  Hello

  To help you better, please answer these questions.

  1. don't you say no Internet access in the notification bar?

  2. what diagnosis you have to run?

  3 did you do changes on the computer before the show?

  To solve your problem, try the provided items.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can check the link:

  Troubleshooting Wizard

  Reference (my computer can not connect to Internet)

  http://support.Toshiba.com/support/troubleshootSelfService?PRDTYPE=computers

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• Need to right W - LAN card Satellite 1130-Z23

  Hello!

  Im looking for the right card for the Toshiba Satellite 1130 ' W - Lan' - Z23.

  The Notebook already W - Lan ist prepared, but I cant´ find the right WiFi card for this.

  I'm looking for this card? And how is the name of this card?

  Thanx Kay to Germany

  Hello Kay

  I googled around and found info the wireless network for your laptop card followed part number: PA3212U-3MPC.

  Google a bit and you will find the store where the card can be ordered.

  Good bye

• 2800-400 BIOS update will allow LAN wireless 802.11 g?

  I recently bought a Belkin 54 G cardbus wireless adapter for use with my Satellite 2800-400, which has a Windows ME OS.
  The installer would not install a driver, even if I was told to be supported.

  I wrote to Belkin and they told me that it was because the BIOS of the laptop did not support wireless 802.11 g and that I should update the BIOS. I've updated to version 2 of the BIOS, but it made no difference.

  I don't know if the Belkin instructions were on the right track or if they were they just push the responsibility too far from themselves as they could.
  Please can someone tell me if my laptop supports 802.11 g wireless, with or without the BIOS upgrade?
  TIA
  Mike

  Hello

  I m not 100% sure that if your laptop supports a local network because wireless connection I put t found any information about it. But as far as I know it s not necessary to update the BIOS with the wireless card works.
  I recommend you contact the service partner. They have more detailed information on this unit.

  Good bye

• Satellite 1130-Z31: impossible to get 1600 x 900 on the second monitor

  I have a Toshiba Satellite 1130-Z31 (an old, but everything works well).

  Now, I have attached a second monitor with a native resolution of 1600 x 900 pixels.

  I put the second screen resolution to 1600 x 900, it is accepted.

  However, the image on the second monitor is ugly, and the external monitor´s what OSD says it gets 1440 x 900 pixel laptop computer signals.

  It seems that Toshiba sends an image with a lower resolution on the whole.

  I installed the latest graphic driver - no change.

  Or would it be a problem with a bad quality VGA cable or almost?

  Any ideas?

  Thank you
  Turtle

  Hello

  Unfortunately, I wasn't able to find the info which resolutions are supported for external screens, but if you can't get 1600 x 900 pixels which means that this resolution is not supported by the graphics card.

  What video port are you using? VGA 15 pins port maybe?

• Satellite 1130-z24: upgrade hard drive question

  Hello

  I have a toshiba Satellite 1130 - z24, which requires a new hard drive, the old man is a MK2108GAP of 20 GB but I want to set up a larger capacity drive. What is the record of the maximum size that I can use without any problems of compatibility?

  One of the following players would work?

  MK6034GAX 60 GB
  MK8026GAX 80 GB
  100 GB MK1032GAX

  I searched on various forums and websites, but the only information I can find is that the BIOS will not support the discs above a certain size, but I don't know how it is.

  Any help much appreciated.

  Hello

  I think that good old classic supports IDE controller.

  The IDE controller manages max 128 GB HDD due to support of the 28-bit LBA.

  So in your case, I would recommend choosing a HARD disk that is not longer than 120GB
  so, theoretically the 100 GB MK1032GAX should be compatible

• For my Satellite 1130 motherboard drivers

  Hello

  My satellite 1130-Z24 died, with a main board failure. I replaced the Board with one, I got from E - Bay, which is not the same exact model, but I don't know which. The keyboard works except the arrows and the touchpad do not work, even if its detected in the Device Manager and XP installed OK, with Service Pack 2. Everything works well, the system uses the Windows generic drivers for display, but it works OK. I can find the model and the SN of the motherboard with BIOS agent, can someone help me find the model of the system, so I can download the correct drivers?

  Rgrds

  Hello

  Well, I don't know if someone in this forum can help to solve this problem, because the information detailed or other serial numbers on motherboards doesn t m.
  I recommend you contact the ASP.

  Best regards

• Satellite 1130: It cannot bring hibernation

  Satellite 1130 is suddenly in hibernation, and I can't reset it.
  I have been using Windows power options in the Control Panel, but this moment was told to use the Toshiba power management.
  I did, but it has not changed anything.

  I think remember me what happened before and having to remove the battery or something.
  I prefer to use Windows power options >

  Thank you
  Therese

  Hello

  It's your decision what scheme of power you want to use. On some models of laptops, it is unfortunately not possible to change in power options and it is grayed out. In any case if you want to, you can remove Toshiba saving of your system and use the power of Windows option.

• How to open Satellite 1130?

  Hello
  milk has fallen in the back of the unit to my computer laptop satellite 1130.
  so far, the laptop does not start. After pressing the button, green light in the front of the computer flashes for a moment and nothing happens.
  now I need a manual to open it. Someone here to help me?
  concerning
  Rainer

  Hello

  Well, it seems it s an oldie because I don t found any information s or photo that could be useful.
  But I think to open Notepad, that the removal of the keyboard is necessary.
  Laptops usually have a small, thin coverage on the keyboard. Under this coverage, you should find 2 screws holding the keyboard.
  In addition, some screws set covers the bottom of the unit.

  But if you have no experience in this procedure, try to ask someone with more experience or a technician qualified.

• Satellite 1130-Z31: keyboard print constantly '1 '.

  I own a Satellite 1130 - Z31 and have the problem that the '1' key is stuck. For example, he constantly prints "1111111111..." ad infinite.

  It is the result of a spill of liquid that's happened about 9 months ago. Until yesterday the keyboard was not a problem.

  I would like to either clean or Exchange the keyboard (or its conductive sheets) but need instructions on how to do it. Suppliers of replacement keyboards seem to be mainly in the United States, that is why, I would be happy if Toshiba was a distributor of spare parts in Sydney as well.

  Thank you very much for your help!

  See you soon,.
  Jens

  Hello

  You should find a Toshiba certified maintainer in most countries.
  Please use the forum advanced search for publications how to contact a service partner or where to find the asp in Australia.
  Each ASP should be able to order a compatible keyboard

  As far as I know the unique key on the keyboard caps are removable. You can try to clean the space under the key cap, and maybe you won't have to replace the entire keyboard.

• Where is the HDD on Satellite 1130?

  Where is the hard drive on a Satellite 1130?

  Hello

  If I m remembering well HARD drive must be placed under the optical disk drive. To access HARD drive please follow:

  -Disconnect portable AC
  -Turn the computer
  -Remove the battery
  -Remove the two black screws in the region half a centimeter above the back of the optical media drive (screw secures the optical drive in place)
  -Remove the drive from the Bay optical media
  -Remove the four black screws that attach the HARD drive
  -Pull on the HARD drive

  Please be careful how you do it and you lose no screws.

  Good luck!