Add WRT54G: second router / access point, unable to get to the outside network.
Here is the prob:
We just got cable internet the other day and the cable operator insisted on using their v1000 Belkin F5D7234-4 instead of my WRT54G V8. So I thought I'd use the WRT54G as a second router/AP (without wireless/LAN/WAN). I was eager to do this by running an ethernet in the WAN on the WRT54G port and plug it into the port of the client on the Belkin, place the wrt - 54 G at the other end of the House and have the WRT54G broadcasting the same SSID and require authentication even as the Belkin and use the Belkin to Linksys Wireless Bridge. In this way, it will extend my wireless network and all computers can access the internet and the other (wireline customers will keep at wire-speed, wireless is not authicate to two different networks.)
I can't get the Linksys network based able to see all the other computers outside the WRT - 54 G, even for wireless clients. On the side of things Belkin network, I can't ping the router even if she pulls a DHCP in the Belkin address. All customers the Belkin side can meet and thin internet. I've fiddled with the WRT54-g for almost an entire weekend now with no result. The WRT54G can see the other router as a DNS as well as external DNS providers, but none of the client computers can. Basically, I'm wanting to extend the network of Belkin 4 as most cable customers and fill a few dead wireless, and make the visible computer on the same network of suggestions?
Parameters of WRT - 54G:
Automatic configuration - DHCP
Same domain name like Belkin
IP router set a tire to the DHCP server
DHCPserver OFF
Mode of operation: router
Safe are disabled.
Wireless SSID is the same as Belkin
Wireless channel is the same as belkin.
Method and auth. key is the same as belkin.
Belkin:
DHCP is on.
15 IP addresses available.
Wireless gateway is on with the WRT54G Wireless MAC address information.
Ethernet cords are connected.
I played with static routes for hours, tried the option routing dynamic, even tried DMZing of the WRT54G intellectual property in the belkin and still unable to connect to the internet. Tried the Belkin MAC address cloning. Nothing seems to work. When I plug the WRT - 54G directly in my digital/Modem/phone cable box, I get internet and everything. I'm at the point of throwing same DD - WRT on it.
But beyond connection "wireless" I discovered really does not work if well (drops random wireless speeds seize up) with two different pieces of equipment running two different firmwares. So the thing connecting wireless set was out the window.
I however knew what I had to do Linksys firmware:
1.) DHCP clients forward.
Customers of Belkin - network
Linksys customers - network B
The dhcp pool was not get transferred to the client computers. That is the 1-2 on network computer had XXX. XXX.100 - 102 for 3-4 computers on network B was YYY. YYY. YYY statically set by Windows. Even after changing to a static address on the network A dhcp scope I could still connect to the internet or to one of the computers on the network.
The static routing table seemed not lead me anywhere either, and I've tried dozens of configurations.
The way I got it Setup is with the customer enthernet of the Belkin ROUTER to THE Internet on the Linksys WRT54G port 1-4. Maybe I should have plugged the ethernet on the client side of 4 ports Linksys?
Anyway DD - WRT redirect DCHP feature was what I need.
Regarding the scenario wireless two routers have the same encryption method and key but different channels and ssid. Who, with DD - WRT for some reason when I jump on the wireless-B, Vista will be ID it as network A (B).
I hope that it has not violated anything except the guarantee which was anyway. The reason for which I needed for my network up this way is because I do a lot of work using VM (of various operating systems), is simply easier to have two separate semi networks. (to different physical locations in the House)
Tags: Linksys Routers
Similar Questions
-
I try to print from my laptop on my Epson printer. It will not work on any of the documents or the internet. The Epson prints what follows: a conflict of channel router/access point - improve your wireless network environment, has been detected. My router is sitting next to my printer and the laptop. The Green WiFi light on the front of the printer is on. I have no problem using my Ipad in the other room. So does mean printing?
It's that all the documents, both new & saved and the same Wordpad?
Maybe
http://support.Epson.ru/products/manuals/102044/Panel/g_html/external/manual_e01.htm
-
I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet. It happened suddenly and with no warning or cause. I tried to turn off the modem for 10 seconds and turning it back on, but I still had the same problem. What should I do? Help, please.
Hello
Maybe this can help, http://www.ezlan.net/wireless.html
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
«Problem with access point or wireless adapter»
Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, MariaHI Maria,
· What operating system is installed on your computer?
· You have installed the latest drivers for wireless network card?
Follow the suggestions below for a possible solution:
Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.
Method 2: See these articles for solve wireless problems:
Why can't I connect to the Internet?
http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
How can I troubleshoot network card?
http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems
Windows wireless and wired network connection problems
Let us know if that helps.
-
Unable to connect to the internal network of SSL VPN
Setting the time first ASA 5512 and I did a lot of research to solve my problem but no luck. I really appreciate if I can get help.
After having successfully connected to ASA via SSL VPN. I am only able to ping to the outside interface (10.2.11.4).
Please check my config and I would like to know what the problem is. Thank you
: Saved
:
ASA 9.1 Version 2
!
hostname asa-01
domain corporate.local
activate t8tpEme73dn9e0.9 encrypted password
volatile xlate deny tcp any4 any4
volatile xlate deny tcp any4 any6
volatile xlate deny tcp any6 any4
volatile xlate deny tcp any6 any6
volatile xlate deny udp any4 any4 eq field
volatile xlate deny udp any4 any6 eq field
volatile xlate deny udp any6 any4 eq field
volatile xlate deny udp any6 any6 eq field
t8tpEme73dn9e0.9 encrypted passwd
names of
sslvpn-ip-pool 10.255.255.1 mask - 255.255.255.0 IP local pool 10.255.255.100
!
interface GigabitEthernet0/0
nameif outside
security-level 50
IP 10.2.11.4 255.255.255.0
!
interface GigabitEthernet0/1
nameif inside
security-level 100
IP 10.2.255.18 255.255.255.248
!
interface GigabitEthernet0/2
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/4
Shutdown
No nameif
no level of security
no ip address
!
interface GigabitEthernet0/5
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
management only
nameif management
security-level 0
IP 192.168.1.1 255.255.255.0
!
boot system Disk0: / asa912-smp - k8.bin
passive FTP mode
clock timezone STD - 7
clock to summer time recurring MDT
DNS domain-lookup outside
DNS lookup field inside
DNS server-group DefaultDNS
Server name 10.2.9.23
10.2.1.1 server name
Server name 10.2.9.24
domain corporate.local
network of Trusted subject
10.2.0.0 subnet 255.255.0.0
the object to the outside network
10.2.11.0 subnet 255.255.255.0
network ss object
10.2.11.0 subnet 255.255.255.0
network of the VPNlocalIP object
10.255.255.0 subnet 255.255.255.0
the object of the LAN network
10.2.9.0 subnet 255.255.255.0
network of the VPN-INSIDE object
subnet 10.2.255.16 255.255.255.248
tcp4433 tcp service object-group
port-object eq 4433
standard access list permits 10.2.255.16 SPLIT-TUNNEL 255.255.255.248
standard access list permits 10.2.11.0 SPLIT-TUNNEL 255.255.255.0
host of access TUNNEL of SPLIT standard allowed 10.2.9.0 list
global_access list extended access allowed object VPNlocalIP object LAN ip
global_access list extended access permitted ip LAN VPNlocalIP object
pager lines 24
Enable logging
asdm of logging of information
host of logging inside the 10.2.8.8
Debugging trace record
Outside 1500 MTU
Within 1500 MTU
management of MTU 1500
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 713.bin
don't allow no asdm history
ARP timeout 14400
no permit-nonconnected arp
Static NAT to destination for LAN LAN static VPNlocalIP VPNlocalIP source (indoor, outdoor)
Access-Group global global_access
Route outside 0.0.0.0 0.0.0.0 10.2.11.1 1
Route inside 10.2.0.0 255.255.0.0 10.2.255.17 1
Route inside 10.255.255.0 255.255.255.0 10.2.255.17 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
CA-Kerberos kerberos protocol AAA-server
CA-Kerberos (inside) host 10.2.9.24 AAA-server
Corp.PRI Kerberos realm
identity of the user by default-domain LOCAL
the ssh LOCAL console AAA authentication
http server enable 4431
http 192.168.1.0 255.255.255.0 management
http 10.2.0.0 255.255.0.0 outside
redirect http inside 80
redirect http outside 80
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Crypto ipsec ikev2 ipsec-proposal OF
encryption protocol esp
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 proposal ipsec 3DES
Esp 3des encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES
Esp aes encryption protocol
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 ipsec-proposal AES192
Protocol esp encryption aes-192
Esp integrity sha - 1, md5 Protocol
Crypto ipsec ikev2 AES256 ipsec-proposal
Protocol esp encryption aes-256
Esp integrity sha - 1, md5 Protocol
Crypto ipsec pmtu aging infinite - the security association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev2 AES256 AES192 AES 3DES ipsec-proposal OF
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint _SmartCallHome_ServerCA
Configure CRL
Crypto ca trustpoint ASDM_TrustPoint0
registration auto
name of the object CN = ciscoasa
Keypairs 4151
Proxy-loc-transmitter
Configure CRL
Crypto ca trustpoint ASDM_TrustPoint1
Terminal registration
Configure CRL
Crypto ca trustpoint ASDM_TrustPoint2
Terminal registration
Configure CRL
Crypto ca trustpoint ASDM_TrustPoint3
Terminal registration
Configure CRL
Crypto ca trustpoint ASDM_TrustPoint4
Terminal registration
name of the object CN = vpn.corp.com
ASA_PKC_One key pair
Configure CRL
trustpool crypto ca policyIKEv2 crypto policy 1
aes-256 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 10
aes-192 encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 20
aes encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 30
3des encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
IKEv2 crypto policy 40
the Encryption
integrity sha
Group 2 of 5
FRP sha
second life 86400
Crypto ikev2 activate out of service the customer port 443
Telnet timeout 15
SSH 10.2.0.0 255.255.0.0 inside
SSH timeout 15
SSH group dh-Group1-sha1 key exchange
Console timeout 0
outside access management
management of 192.168.1.2 - dhcpd addresses 192.168.1.10
enable dhcpd management
!
a basic threat threat detection
host of statistical threat detection
statistical threat detection port
Statistical threat detection Protocol
Statistics-list of access threat detection
no statistical threat detection tcp-interception
NTP server 10.2.9.23 source outdoors
SSL cipher aes128-sha1-3des-sha1
management of SSL trust-point ASDM_TrustPoint4
SSL-trust outside ASDM_TrustPoint4 point
SSL-trust ASDM_TrustPoint4 inside point
WebVPN
allow outside
No anyconnect essentials
AnyConnect image disk0:/anyconnect-win-3.1.04063-k9.pkg 1
AnyConnect enable
tunnel-group-list activate
list of chip-tunnel TerminalServer mstsc.exe Terminal windows platform
attributes of Group Policy DfltGrpPolicy
value of server DNS 10.2.9.23
L2TP ipsec VPN-tunnel-Protocol ikev1
field default value corp.com
WebVPN
value of customization DfltCustomization
internal group CA-SSLVPN-TEST strategy
attributes of CA-SSLVPN-TEST-group policy
WINS server no
value of server DNS 10.2.9.23
client ssl-VPN-tunnel-Protocol
field default value corp.com
internal group CA-CLIENTLESS-TEST strategy
attributes of group CA-CLIENTLESS-TEST policy
clientless ssl VPN tunnel-Protocol
WebVPN
value of URL-list of the contractors list
chip-tunnel enable TerminalServer
ssluser nS2GfPhvrmh.I/qL encrypted password username
username ssluser attributes
Group-VPN-CA-SSLVPN-TEST strategy
client ssl-VPN-tunnel-Protocol
group-lock AnySSLVPN-TEST value
type of remote access service
username admin privilege 15 encrypted password f4JufzEgsqDt05cH
cluser 3mAXWbcK2ZdaFXHb encrypted password username
cluser attributes username
Group-VPN-CA-CLIENTLESS-TEST strategy
clientless ssl VPN tunnel-Protocol
value of locking group OLY-Clientless
type of remote access service
attributes global-tunnel-group DefaultRAGroup
Group-CA LOCAL Kerberos authentication server
tunnel-group DefaultRAGroup webvpn-attributes
CA-ClientLess-portal customization
attributes global-tunnel-group DefaultWEBVPNGroup
sslvpn-pool ip address pool
Group-CA LOCAL Kerberos authentication server
tunnel-group DefaultWEBVPNGroup webvpn-attributes
CA-ClientLess-portal customization
remote access to tunnel-group AnySSLVPN-TEST type
tunnel-group AnySSLVPN-TEST general attributes
sslvpn-pool ip address pool
CA-group-Kerberos authentication server
CA-SSLVPN-TEST of the policy by default-group
tunnel-group AnySSLVPN-TEST webvpn-attributes
OLY-portal customization
Disable Group-alias AnySSLVPN-TEST
Disable AnySSLVPN-TEST-group-alias aliases
OLY-SSLVPN disable group-alias
enable SSLVPN group-alias
type tunnel-group OLY-Clientless Remote access
OLY-Clientless General attributes tunnel-group
CA-group-Kerberos authentication server
Group Policy - by default-CA-CLIENTLESS-TEST
OLY-Clientless webvpn-attributes tunnel-group
CA-ClientLess-portal customization
try to master timeout NBNS-server 10.2.9.23 2 2
Group-alias Clientless enable
Group-aka cl disable!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
class class by default
Statistical accounting of user
!
global service-policy global_policy
context of prompt hostname
anonymous reporting remote call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group 3 monthly periodic inventory
Subscribe to alert-group configuration periodic monthly 3
daily periodic subscribe to alert-group telemetry
Cryptochecksum:ceea6b06a18781a23e6b5dde6b591704
: end
ASDM image disk0: / asdm - 713.bin
don't allow no asdm historyHello
I'm glad to hear it works
Please do not forget to mark a reply as the right answer or useful answers to rate
-Jouni
-
Satellite L650 - unable to connect to the public network (has no valid IP address)
Hello
Toshiba satellite L650 laptop computer (with windows 7 64-bit), I bought two days back and I'm unable to connect to the public network. Sometimes, it must be connected to the public network and after a few minutes it disconnects. I get the message "wireless network doesn't have a valid IP configuration him."
I have visited many forums and did everything, but of no use.
1. people with disabilities the tcp/ip V6 of the registry.
2. the DHCP is enabled. With the help of the automatic IP (DHCP)
3. also tried with a static IP configuration.
4. uninstalled the antivirus provided with laptop computer (Norton).
5 disabled the windows firewall.
6. restored to factory settings.I called Toshiba Tech support as well and they have suggested that it may be a problem of H/W but I don't think that so that it can be hardware problem because sometimes he must be connected to the public network. Now I'm left with no option except return the laptop to Toshiba (I'm less interested in this because I know that sending laptop for replacement will be more frustrating).
Can someone please give some other suggestions for this problem?
Hey,.
Can you connect to your home WIFI router correctly?
If you have problems with the public network connection, you should ask the owner of these networks. Usually, there is always a contact, you can ask if you have any problems with the connection.
What you can try is updated WLAN driver from Toshiba's official website:
http://APS2.toshiba-tro.de/WLAN/If it doesn't work, ask the person contact I mentioned.
-
Original title: Unable to connect to the wireless network
Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7. "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address. Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3. It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.) Before that, wireless network worked well. (So unable to connect to the Internet for updates.) Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate. I don't remember what I did to try to solve this problem in the last days.
I should add that I have tried the solutions of the previous forum on this topic, and none worked.Hi Marilynnla,
Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.
Read this article and follow the steps. Lets see if it helps in any way.
How to troubleshoot wireless network connections in Windows XP Service Pack 2(Works for Windows XP SP3 as well)
-
I am unable to connect to creative cloud. The error that says Unable to get on the Adobe servers
Please see:
- Creative cloud activation and login troubleshooting
- Adobe Download Manager cannot happen on the Adobe servers
- Cloud cannot create arrived on Adobe servers.
You can try to remove creative cloud app and reinstall it.
- Using creative cloud | Uninstall the creative cloud desktop application
- https://helpx.Adobe.com/Creative-Suite/KB/CS5-cleaner-tool-installation-problems.html
Install the cloud creative app - https://helpx.adobe.com/creative-cloud/help/install-apps.html
-
Bridge or Access Point mode? What is the difference? Cascade?
Hello
Just to give you a quick training of my installation at this time. I have a 4500 square foot home and currently Uverse Internet (NVG589, 45 Mbps down, 5 Mbps upward). I bought myself a R7000 hopes to expand to the entire network. I also have a Netgear EX6100 that I use for the network...
So currently I have the R7000 connected in AP mode and all my devices connect to it and I turned off WiFi on the NVG589. I have also the connected EX6100 and its WiFi piggybacking off the R7000. The issue I'm having is that I'm the slow service connection via the R7000 (20 mbs, vs 45mbps. I was getting around 40 MB/s connection to NVG589). This happens when connecting both the R7000 and the EX6100.
I was looking at the possibility of plugging the R7000 in Bridge mode and see if that would help. But, from my understanding, if you are using the bridge, then the R7000 does not send over WiFi (or extend the wireless network, the only advantage is that you can extend things through (wired) LAN) is that correct? I need something to extend WiFi as well as throughout the House. I can also use the EX6100 but I do not think that this is enough for any home.
Any suggestions? I also looked in the forums and saw some people talking cascaded from the router, do not know what makes and even if it would help me but if someone you ask around, it would be greatly appreciated.
Thank you!
Apparently, you can configure the Ex6100 as an AP. This link shows how. I have never used this device, so only can go by this doc. Scroll down to about 15 points, in the doc. Good luck!
-
Access Point WAP200 is compatible with the injector WAPPOE12?
Hello!!!
I want to bring the power of an Access Point WAP200. I need to know if the WAPPOE12 injector is compatible with this kind of Access Point.
I deployed 108 AP WAP200 in a wireless network and I want to know what type of power injectors, I use in this set.Thank you!!
Best regards, CarlosHi cramosfors. The search of the forums I found this.
-
How to assign static ip to 1131AG Lightweight Access Point before register you for the controller
Hello
I have controller Wireless LAN that is installed at the head office, we have allowed H-harvest so that the remote access can be registered with headquarters controller.
Now, I have an access point to one of the remote site now, I want to give a static IP address to the AP through that console too, before saving the controller.
I have the console with sub name:
...... MAC address... >
But if I type any command to assign the IP address, it displays the error "command disabled."
I join calrification details.
I know that I can connect to this access point to the headquarters LAN and registered with WLC and then via WLC GUI, I can assign static IP address, but I need solution to assign a static until you save to WLC IP not.
I will be obliged if I get a solution
Hi Vinod,
problem solved?
Concerning
Surendra
Please do not forget to note the useful messages...
-
Network Vista - "local access only" - unable to connect to the internet
Hi all, I use my old y550 of one day, and I can't connect to the internet via my wireless router. When I go to use the Connection Wizard internet, that I am able to connect to the router but not the internet. Very, very annoying! I tried all the trouble shooting tips in Vista, but none of them make any difference at all. And oh yes, I put Vista "connect automatically" for the router, but it never - sticks I always (try to) reconnect manually. How can happen on a new machine?
Hi all, understood the problem - need to update the firmware on my linksys router. Once I did, I could connect. I still have to manually connect everytime I restart the computer, however, despite the box "connect automatically". Any ideas?
-
Original title: internet connection problem
Hey,.
I use a wireless connection at home, it works very well in my android and apple gadget, but it does not work for my laptop. It is said:
1. Windows cannot communicate with the device or the reaource (primary DNS server)
2. the connection between the Internet and your access point, router or cable modem is broken
3 problem with access point or wireless adapter
I think it's an effects of virus or something? Because yesterday it works really well. How can I fix? Thank you very much
Hello Hildegard Lydia,
You may experience this problem for a number of reasons. Some common problems that can cause these problems are: drivers damaged or incompatible, updates missing, network connection settings, hardware problems or software or TCP/IP can sometimes be damaged or corrupted.
What is the brand and model of your computer?
Please follow the steps mentioned below:
Method 1: a component of the Internet connection on your computer is a package of instructions called TCP/IP. TCP/IP can sometimes become damaged or altered. If you can't connect to the Internet and you have tried all other methods to solve the problem, TCP/IP can be causing it.
I suggest you try to reset the TCP/IP stack.
http://support.Microsoft.com/kb/299357Method 2:
I suggest that you refer to the following link:
Why can't I find a wireless network?
http://Windows.Microsoft.com/en-CA/Windows/cant-find-wireless-network#1TC=Windows-7
Method 3:
See the steps in the following link and check:
Wireless and wired network problems
Please an update on the status of the issue to help you further.
-
Unable to connect to the outside LAN PIX!
Hello
My PIX is able to connect to all resources outside except the LAN (192.168.2.0/24) where sits the external interface.
Even the corresponding access lists do not display any success!
Please find the relevant config fixed.
Any ideas?
interface ethernet0 100full
interface ethernet1 100full
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
access-list in out permitted tcp 10.10.10.0 255.255.255.0 host 192.168.2.183 eq telnet
> access-list in out permitted tcp 10.10.10.0 255.255.255.0 host 192.168.2.183 eq
ftp > access-list in out permitted tcp 10.10.10.0 255.255.255.0 host 192.168.3.183 eq telnet
> access-list in out permitted tcp 10.10.10.0 255.255.255.0 host 192.168.3.183 eq
ftp > external IP 192.168.2.70 255.255.255.0
IP address inside 10.10.10.1 255.255.255.0
NAT (inside) 0 0.0.0.0 0.0.0.0 0 0
Access-group departure in the interface inside
Route outside 0.0.0.0 0.0.0.0 192.168.2.7 1
Vincent
access-list in out permitted tcp 10.10.10.0 255.255.255.0 host 192.168.2.183 eq telnet<>
access-list in out permitted tcp 10.10.10.0 255.255.255.0 host 192.168.2.183 eq ftp<>
Since the pix inside interface not to receive any request for telnet/ftp. I suspect that the pc that initiated the session has an incorrect default gateway or default gateway no route to point to the 192.168.2.0/24 subnet.
in other words, it points to another device as the default gateway (for example, the internet router) and yet this device has no route to the pix for subnet 192.168.2.0/24.
-
Satellite C660-1NJ - unable to connect to the wireless network
Hi guys
I got a 1nj c660 and I have a wireless connection to a Fritzbox 7170.
Now, this morning, everything was fine and I connected wonderfully, but now I can't connect no settings have been changed I just stop and start as usual. I used configfree and it shows the network but if I try to connect it says unable to connect to the network. I have Win7 home basic OS.
I uninstalled the wireless network card and reinstalled, updated the drivers but nothing works, I still get the same error.
Can someone help will appreciate it greatly!
Hello
Are you able to connect to open WLan?
I mean you can try to disable security options in your Fritzbox and might test whether you are able to connect without the WEP, WPA or other safety standards.
Of course, you should only done for testing purposesIf this box works, then it means that the security of your router settings were not consistent with the settings of the Wlan card.
Maybe you are looking for
-
Sync connection window is empty
HelloI have problems to log in to the Firefox sync process. After the update, I have a yellow line at the bottom of the browser window that indicates that there is a synchronization problem, and that the password is not valid. After pressing the 'Pré
-
Body of the messages from certain senders appears
Dear all, I use Thunderbid 24.4.0. In fact, I get e-mails but the body appears. It is seems to be empty, but it is not.This email came from same Senders.the other fields will appear (sender As Object, receiver, subject,...) Thanks for your help, Best
-
Firefox hosts Web host sites or email?
Firefox hosts Web host sites or email?
-
corrupted back ups, lost all my photos?
I tried several times to backup and restore of old to the top of the synchronization. There was a file corrupted in the meal, make problems. The message was that the software has been altered. I guess it was my internet connection is slow DSL coun
-
Driver Ethernet missing on the Satellite A100-906
HelloI have a laptop Toshiba Satellite A100-906 and I recently formatted.I found the drivers from the Toshiba site, but I'm still missing the Ethernet driver! Download of Toshiba is not an installation file and I don't know what to do.Help, please! h