Adding a help sountrack'u

Similar Questions

• Adding record helps the dynamically nested table

  Hello guys im trying to add records to a nested table plsql dynamically. Here is my code that only adds a record. I can not figuered on why it's not more then add one record to the nested table. I think I would say at the table to update the index and insert the new index but I'm not sure on the index can someone throw me a BONE.
  I also tried the records, but I seem to be facing the same problem.
  

  create or replace
  PROCEDURE QUICKTEST AS 
  BEGIN
  /*declare and array to loop through. to write error log.*/
  declare
  TYPE local_table IS TABLE OF VARCHAR2(30);
  acct_code local_table;
  
  
  TYPE rec_type IS RECORD (       -- local RECORD type
      f1 INTEGER,
      f2 VARCHAR2(4)
    );
    r2     rec_type;                -- local type
  
  num number(17):=0;
  
  begin
  FOR Lcntr IN 1..20
  LOOP
      
      
       acct_code := local_table ('I');
       r2.f2 := num+1;
      
  num:=num+1;
  
  END LOOP;
  
  END QUICKTEST;

  I think you are looking for something in the lines of...

  CREATE OR REPLACE PROCEDURE quicktest
  AS
     TYPE local_table IS TABLE OF VARCHAR2(30);
  
     acct_code   local_table  := local_table();
  
     TYPE rec_type IS RECORD(   -- local RECORD type
        f1   INTEGER
       ,f2   VARCHAR2(4)
     );
  
     TYPE rec_type_arr IS TABLE OF rec_type
        INDEX BY BINARY_INTEGER;
  
     r2          rec_type_arr;   -- local type
     num         NUMBER(17)   := 0;
  BEGIN
     FOR lcntr IN 1 .. 20
     LOOP
        acct_code.EXTEND;
        acct_code(lcntr) := 'I' || lcntr;
        r2(lcntr).f1 := num + 1;
        r2(lcntr).f2 := 'J' || TO_CHAR(num + 1);
        num := num + 1;
     END LOOP;
  
     DBMS_OUTPUT.put_line(acct_code.COUNT);
     DBMS_OUTPUT.put_line(r2.COUNT);
  
     FOR i IN acct_code.FIRST .. acct_code.LAST
     LOOP
        DBMS_OUTPUT.put_line(acct_code(i));
     END LOOP;
  
     FOR i IN r2.FIRST .. r2.LAST
     LOOP
        DBMS_OUTPUT.put_line(r2(i).f1 || ' :: ' || r2(i).f2);
     END LOOP;
  END quicktest;
  /
  

• Can a second hard drive be added to a Satellite A200-298

  Hello
  I have a Satellite A200-298 which came with a hard drive of 200 GB, I wondered if it was possible for a second hard drive more to be added to help with Itunes that is storage of files and movies.

  Post edited by: Irishdiver

  Hi mate,

  Unfortunately, there may be a second HDD to be added because if your machine has only one disc and then the other drive hard bay would not have an installed hard drive connector.

  I would buy an external hard drive and store my stuff there I was you...

  Welcome them

• Help with dynamic action and the selection list item

  G ' Day Apex gurus.
  
  I have problems trying to achieve to trigger the Help window from an element automatically select. A Help window is triggered when it is clicked on the label of an item, but my customer wants to be triguered automatically as soon as the user clicks to view the options in the select list.
  
  I think I should be able to do with dynamic actions but I can't function.
  
  I know when someone clicks on the label of the item selection list trigger this JavaScript
  
  JavaScript:popupFieldHelp('277938589795252851','1545903379570909')
  
  So I want to trigger the javascript also when the user click on the item selection list and pull down the options and for that I think that the dynamic action is the way to go, but I can't do things.
  
  That's what I have to do:
  
  I created a dynamic option as follows:
  
  Name: test
  Sequence: 30
  Even: click
  Selection type: product (s)
  Article (s): P1_RATING <-a selection list item
  Condtion: - no requirement.
  
  Real Actions
  Sequence: 10
  Action: Run the JavaScript Code
  Fires when the result of the event is: true
  Fire on loading the page: checked
  Code: javascript:popupFieldHelp('277938589795252851','1545903379570909')
  
  Thank you anyone who can tell me what I'm doing wrong here or bring a solution to my problem to trigger the Help window from an element automatically select.
  
  Kind regards
  Carlos

  Hi Carlos,

  I've set up a test case of exactly in the same way and it worked fine for me. I've created a page element called P1_DA_DEMO and added some values of the static selection list, then added a help text. I used the settings are lower, I suggest you try again, but also make sure that you have no other Javascript errors on the page. Use a tool like firebug to check.

  Name: Action Dynamics demo
  Sequence: 10
  Even: click
  Selection type: product (s)
  Product (s): P1_DA_DEMO<- a="" selection="" list="">
  Condtion: - no requirement.

  Real Actions
  Sequence: 10
  Action: Run the JavaScript Code
  Fires when the result of the event is: true
  Fire on loading the page: unchecked
  Code: javascript:popupFieldHelp('277938589795252851','1545903379570909')

  Scope of the event set a Bind s.

  Thank you

  Paul

• With the help of several conditional tags with multiple outputs of WebHelp

  I have a project that I created for a web application. Within the web application, there are 3 types of customers (business Accts, Accts National and level 1 clients).

  I added each help topic associated with the help topics that I created.

  Then, I created 3 outputs of webhelp and 3 Table of contents for each type of client.

  My goal is to publish the project, where each type of client has their own output generated. Do it this way, which is listed in the help topics of table of contents for each type of customer that is not correctly displayed.

  Example: National accounts TOC

  What is generated:

  I have tagged in the table of contents to the conditional tag appropriate help topics. Help, please. Any advice? I can also be reached at [email protected]

  None of your screenshots came through - the icon of camera in the web interface allows you to attach images

• A page of the site is too wide and there is no horizontal slider to allow access

  A site that I use on a regular basis has recently been renovated, and the new page is wider than my widescreen. There is no horizontal cursor to activate the overall analysis. I confirm their helpline and was told that the log-in box is in the upper right of the screen. The part that I can't access! Added the help site, it must be my problem not them. Not very useful.

  I tried to minimize the screen and pulling on the side, but that just makes the larger screen without revealing more of the web page.

  Does anyone have any advice or suggestions?

  Hi, try zooming with Ctrl and - key (Ctrl and + to zoom in, Ctrl and 0 for the default value). You can also hold CTRL while rotating the mouse wheel.

• iPhone 6 won't synchronize contacts, calendar of events

  iPhone 6, iOS 9.2.1 will not sync contacts or calendars with iCloud. This phone does NOT mail synchronization iCloud, GMail address. Great, fast sync photos. I have another iPhone 6 + and two iPads on the same Apple ID and they synchronize the great. I turned off calendar and contacts iCloud then restarted and added. Help.

  I was talking to Support Apple technique for an hour on the problems of synchronization of the contacts. I had this problem for as long as I had my iPhone 6 Plus. My iPad syncs fine, but my iPhone 6 s used to synchronize contacts. Closed the cat when they asked me to restore to factory settings - can't do it right now.

  I'm curious to know if you are having the same problem I encounter. The only way that I could download contacts on my iPhone from iCloud is create a contact on my iPhone. As soon as I did this, all my contacts to iCloud displayed on my iPhone. Synchronization is always broken, so if I want fresh contacts, I disable iCloud Contacts sync on my iPhone and opt to remove local copies of my contacts. Then I iCloud Contacts sync back on and create a contact on my iPhone - then BAM... contacts are downloaded to iCloud. Note: I did not understand how to get a contact from my iPhone to iCloud.

• FileMaker Server Pem

  I have a computer is always running Filemaker 11 on a remote network share. After reloading of the application of the FMP 11 on this computer, I can longer open remote files. I remember having to add a Pem of server to the app to get the remote to work, but cant't remember where this needs to be added. Help.

  I thought it was library < application="" support=""> Filemaker, but could not find the Filemaker folder in Application Support

  I do not use this software, but there are several library folders.

  The other is in your user folder / your name short.

• X140e why it is so slow

  Why is it so slow? This was my first purchase of laptop in 4 years and I think the NEW Lenovo is slower than my last (an hp computer that cost $300). I got this x140e recommended by a computer scientist at my college, after the death of my old laptop in a flood. so why this computer costs $500 if she is so slow? and what I can do to fix this? is there something or am I stuck with a computer that takes 10 seconds to switch between the tabs? and I've been to 3 separate internet connections, who had the same result, super slow X140e. I'm doing something wrong?

  I had the same problem. The problem is that the system of stock only comes with 2 GB of RAM, and integrated graphics subsystem takes 512 MB off for video application. If you have only 1.5 GB free memory left!

  Since the X140E has two memory slots, I added 4 GB of RAM so I with the existing 2 GB 6 GB total. Now the machine is much more responsive and faster. I am running Windows 7 64 bit and it is not nearly as slow more.

  Check the Task Manager, I can see the average BONE needs from 1.7 to 2 GB of RAM for light loads and > 2 GB for heavy loads. So the 1.5 GB available in a stock system is not enough RAM to all!

  If yours has only 2 GB I would add a little more. I really think that the X140E should come with 4 GB as a default, because performance is hampered with 2 GB. I can say in my situation as adding RAM helped.

• I get an error message, "Hacks" when the office

  Box warning about unauthorized access will appear after loading the driver but before charge of office. can't get rid of it on xp pro sp3

  Original title: inherited satellite pro a60

  Your added description helps.
  This is known as the "legal notice".

  Change that is to use Regedit to edit the registry.  The following article provides instructions to achieve:

  'How to activate a warning during Windows logon Welcome Message'
    <>http://support.Microsoft.com/kb/315232 >

  Probably a better way to change that is to use the local policy editor or the Group Editor (start-> Run-> "gpedit.msc")
  Instructions to change this way is in the following article:

  "How to configure Windows Server 2003 to display a message when users log on"
    <>http://support.Microsoft.com/kb/310430 >
  Note that although this article was written for Server 2003, halfway the page instructions for Windows XP under the subsection titled "Configuring a group policy setting for Windows XP"

  Deletion of entries of title and the text should remove the notice.

  HTH,
  JW

• is there a way to disable the "fallback" option in XP?

  I just get licenses retail XP & CD to someone who has retired from some old computers and passed to windows 7. Activation does not appear to be a problem with me using these buttons, but I am not so autocratic updated WGA Push in the system yet or not. In fact, it is always downloaded updates after that I remembered to use my SP3 CD as well.

  Because I had a spare part to upgrade an old computer to Windows 98SE, I decided that I've never bothered spending the money to upgrade, but it has enough power to deal with. It is now a dual boot.

  The 'stand by' option never worked in windows 98, and it crashed the computer. I never found a way to get rid of this option. However, I have seen XP 'stand by' systems where does not appear. How can I make my own system, one of those who, as I just tested and it caused my system never wake up.

  He had an incompatibility with the option 'stand by' in win98 for 10 years, it's no surprise that it would not work in XP.

  BTW, if there is a way to also disable 'stand by' Windows 98SE, please also post this procedure, that I don't have the system put in place as a dual boot. This way I don't have to reinstall everything and if I want to use something to Win98, I can just boot win98. Adding another helped drive.

  I found the following links with a Google search...
  Maybe they are what you are looking for.

  (FWIW... it's always a good idea to create a system)
  Restore point before editing the registry)

  Remove the day before since the closing of Windows XP
  http://www.PCMag.com/Article2/0, 2817,2341076,00.asp

  How to disable/remove Shutdown of Windows 7 / Vista / XP
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-remove-shutdown-from-Windows-XP-and-Vista/

  For Windows 98, you will need to do it through
  CMOS Setup... See the following link:

  How to disable standby or power management
  http://www.computerhope.com/issues/ch000338.htm

• How LinkSys WRT54G v7 supports RTSP streaming service?

  Hello

  I use the LinkSys WRT54G v7 and I can see the RTSP videos using VLC player to m.youtube.com. Strangely, I can't play videos if another AP as the DLINK is used instead of LinkSys.

  I analyzed packages and discovered that RTSP server (youtube) sends RTP packets to the ports of the client which are acquired to the RTSP SETUP procedures. Then the Server packets cannot reach the customer because the hole of the UDP is not perforated to the AP.

  But, when I use the LinkSys, RTP packets can cross the NAT.

  That is my question. LinkSys offers NAT traversal for RTSP streaming service? So, why can't find a list of features on this subject from the LinkSys product information? No explanation for this?

  Thank you in advance for your help!

  1. None of the NAT helpers in the Linksys firmware are documented anywhere.

  2. If possible, they added a helper for RTP.

  3. it could also be that VLC player in front of the port with UPnP.

• Explorer 8

  How can I remove the form of the address bar history

  http://browsers.about.com/od/internetexplorertutorials/SS/ie8privatedata.htm

  How to delete browsing history in Internet Explorer 8

  http://www.Microsoft.com/Windows/Internet-Explorer/support/FAQ.aspx

  There are several ways you can clear your tracks in Internet Explorer 8

  1. Proactively with InPrivate browsing - Internet Explorer 8 offers you a choice over where your browsing habits are registered.

     • Start InPrivate browsing open a new tab and select Browse with InPrivate from the menu on the page. You can also begin InPrivate browsing by opening a new page and selectingInPrivate browsing from the safety on the command bar button. When you have completed this action, Internet Explorer 8 will launch a new browser session that does not store any information, leaving no evidence of searches or visits the Web page. To end your InPrivate browsing session, simply close the browser window.

  2. Reactive with enhanced delete browsing history

     • Now you can choose to preserve cookies and temporary Internet files for sites in your Favorites folder, allowing to the these sites to remember the user's preferences and display faster while browsing. This added functionality helps you protect your information while ensuring the functionally and usability your Favorites from trusted sites.

     • To erase your tracks after you've come click on Security from the command bar and selectdelete browsing history from the menu to open an options page. From there, you can choose a number of options to keep your private browsing. Place the boxes next to the items that you want to remove and clickRemove to clear your tracks.

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/threads

  They will help you with your question IE in Forum Internet Explorer above.

  See you soon.

  Mick Murphy - Microsoft partner

  How to delete browsing history? How can I erase my history temp, cookies, navigation, etc?

• Investigation on the issue

  I've owned my Vista Basic windows computer since August 2007. I use it for my Iphone and Ipod since 2007. Recent music shows on my Iphone that was never there before.  Can you please provide me with a list of titles and the artist that was on the original vista windows? And explain why it is now suddenly on my reading list of Iphones under "recently added"? Help PLEASE

  Hello

  The music files that come with Windows Vista

  Artists contributing to the song name

  Kalimba.                                           Mr. Scruff

  Girl with hair of flax.           Richard Stoltzman

  Sleep away.                                    Bob arci

  You might accidentally synced those files via Itunes is the reason why they appear under recently added playlist.

  Let us know if this helps

  Concerning
  Anthony.

• Investigating information _

  I've owned my Vista Basic windows computer since August 2007. I use it for my Iphone and Ipod since 2007. Recent music shows on my Iphone that was never there before.  Can you please provide me with a list of titles and the artist that was on the original vista windows? And explain why it is now suddenly on my reading list of Iphones under "recently added"? Help PLEASE

  Please repost your question in music and its Forum: http://social.answers.microsoft.com/Forums/en-US/vistamedia/threads where people who specialize in issues of music will be more than happy to help you with your problem.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.