Adding a 'note' of virtual model

Similar Questions

• Trying to fix a CID parent access to a file descriptor of delta but VM still does not start. Other error "cannot open the disk...". The specified file is not a virtual disk.

  Starting the virtual machine has been tried several times earlier when I received the error message to tell the parent disk had been changed since the child was created. I looked at the resolution and had a go at fixing.

  I downloaded the vmdk files to find the problematic descriptor file it corrected and then download the a back fixed to the data store. I then removed the VM of the inventory and then re he added before attempting to start it. He says now the specified file is not a virtual disk. Unfortunately, I didn't know that he was still working on a snapshot file and had been for some time. It was a former VM test that I had played a little bit with all learning on VMware, but unfortunately he had a few files on it which is no longer, I have backup ups for and I could really do with recovery of them! The base file and delta file are always on display in the data store and I can re - use the base file in a new virtual machine but I need the data from the snapshot if possible file. Not sure if it can be manually engaged at the base (I have a copy of). I'm new to this depth of troubleshooting and according to research I realize it is a great chance, the data is not recoverable. Having said that if there is no hope at all then I would try or at least have someone who knows what they're doing a go help before you tell me everything is lost! I'm not really bothered to get the virtual machine running again, but must be able to copy some files in the C drive.

  Any help much appreciated.

  Thank you

  Craig

  I can't tell you if the data in the virtual drive itself can be retrieved by the attached hard file. However, it seems that you have used an editor who added a BOM (Byte-Order-Mark) at the beginning of the file, which made her an invalid for ESXi.

  André

• How to resolve the error "the specified file is not a virtual disk?

  Hello - I have a ubuntu/linux host running vmware 1.08 with a SBS2003 VM that recently ran out of physical space in HD. After adding a new drive hard I know to get a specified file is not a virtual disk on one disk error I try to add - the other 3 work. After looking around here, I checked the file descriptor and it seems in good condition.

  My paper does not help because I can not start the virtual machine with the hard drive, I need.

  What are some solutions that I can try?

  Thanks for any help!

  B.

  Unfortunately, you lost the data of zero bytes hard snapshot files. I hope that you don't have a backup of your data, since the snapshot was created in January!

  To be able to feed the virtual machine - even with the disk data corruption - replace zero files hard bytes per who has 327680 bytes, which is essentially an empty file with only the metadata.

  André

  PS: as mentioned earlier, please save the files until you turn on the virtual computer to be able to return to the current status in case you should!

• Broken the instant string: the specified file is not a virtual disk.

  Hello

  I have a problem with my VM Workstation 8. After having turned off does not correctly even if that I waited a long time to complete the operation, the vmdk file seems to be broken.

  Error message when you try to start: "the specified file is not a virtual disk.

  Comments & host system: Windows 7 x 64

  Disc type: thin with a size of 2 GB per file, three shots were made

  I checked the CID & parentCID, but found no errors (see attached vmdk).

  VMware - vdiskmanager.exe - R "Customer X64.vmdk model W7"-> no errors

  VMware - vdiskmanager.exe - R "Client model W7 x 64 - 000001.vmdk"-> no output if the operation is successful or not

  VMware - vdiskmanager.exe - R "Client model W7 x 64 - 000002.vmdk"-> no output if the operation is successful or not

  VMware - vdiskmanager.exe - R "Client model W7 x 64 - 000003.vmdk"-> no errors

  VMware - vdiskmanager.exe - e 'model customer W7 x64.vmdk'-> drive chain is consistent

  VMware - vdiskmanager.exe - e ' customer model W7 x 64 - 000001.vmdk ".

  -> could not open *-000001.vmdk: the specified file is not a virtual disk.

  -> could not open *-000001.vmdk: the specified file is not a virtual disk.

  Drive chain is not consistent.

  VMware - vdiskmanager.exe - e ' customer model W7 x 64 - 000002.vmdk.

  -> could not open *-000002.vmdk: the specified file is not a virtual disk.

  -> could not open *-000002.vmdk: the specified file is not a virtual disk.

  Drive chain is not consistent.

  VMware - vdiskmanager.exe - e ' customer model W7 x 64 - 000003.vmdk.

  -> could not open *-000003.vmdk: the parent of this virtual disk could not be opened.

  -> link to disk *-000003.vmdk successfully opened

  -> could not open *-000002.vmdk: the specified file is not a virtual disk.

  Drive chain is not consistent.

  Can someone help me?

  Best regards

  Joe

  That looks really bad. Do you have any AV running application that scans the vmdk files?

  Important: As a first step, back up all files to ensure that nothing can go wrong!

  Then replace all the zero byte vmdk files with one of the files vmdk 327,680 bytes (for example "model client W7 x 64-000001 - s020.vmdk"). If the virtual machine at startup, run a chkdsk on all readers of the virtual machine as there is a chance of corruption/loss of data due to missing data (zero bytes vmdk files).

  André

• API call for the deployment of computer virtual model?

  Hi all

  Could someone tell me how to deploy a virtual model computer using vsphere sdk webservice with the names of methods?

  Thanks in advance

  You use the method CloneVM_Task() (http://www.vmware.com/support/developer/vc-sdk/visdk41pubs/ApiReference/vim.VirtualMachine.html#clone)

  You're going to treat it just like the deployment of a model non - VM, the only difference is that the model has a property that marks it as a model if you can not make any changes or it turn, but essentially a virtual computer model is identical to a virtual machine. Simply locate your model VM mor and pass while in the clone, spec and deploy as you normally would.

• ORA-7445 the selection of virtual model

  Hello
  , We get a core dump when trying to select from a virtual template. We found the doc following (DocId1288509) about the mistake but hoped that someone might be able to provide some guidance. The document points to Bug 10091171 but he says it's fixed to 12.1.0.0. Is there a way around this problem in 11g? Do we not have an active index that causes our virtual model to fail?
  
  Kind regards
  J.P.

  Hi J.P.

  Patch 10091171: ORA 7445 [QERIXTUNNELGETKEY () + 189] WITH FBIS AND NLS
  is available to fix the bug in 11g.

  Linux x 86-64 - 11.2.0.1.0 and 11.2.0.2.0
  Solaris (SPARC 64, x 86-64) - 11.2.0.2.0

  This patch can be downloaded from My Oracle Support.

  Thank you
  Matt

• iPhone 6s does not 'AirPlay' 07 model Apple TV, why?

  iPhone 6s does not 'AirPlay' 07 model Apple TV? Why?

  PS Both connected to the same network

  Apple TV 1 models did not support Airplay.

  How to use AirPlay on your iPhone, iPad or iPod touch - Apple Support

• You just bought a MacBook Pro 13 "retina. A check of SN and he says initially 2015 but box has a label saying 23.9.2015. A black buy Friday save £100, but that should have is not the latest model. It's going to be as good as the last model?

  You just bought a MacBook Pro 13 "retina. A check of SN and he says initially 2015 but box has a label saying 23.9.2015. A black buy Friday save £100, but that should have is not the latest model. It's going to be as good as the last model? J

  Early 2015 is the current model for a 13 "MacBook Pro retina. See the list in the way to identify the MacBook Pro - Apple Support models

• Vision project of OR can not find the model after migrating to labview.

  Hello
  My problem is the following. I did a project with the vision Builder of NOR. Well, it works fine. BUT, when I migrate this labview project (and after that, I build an executable version) it can not find the model on the selected images. (Yes, I use the program with images, not with the camera.) What should I do? I tried to put the models next to this project, but it did not work.

  
  

• my computer again "you're not enough virtual memory" when I'm trying to load a game.

  My computer again "you're not enough virtual memory" when I try to download any game.

  Hi Sue and Betsy,

  This article shows how to increase the amount of virtual memory on your PC: http://windows.microsoft.com/en-CA/windows-vista/Change-the-size-of-virtual-memory (I recommend setting virtual memory to 2500 MB initial size and a maximum size of 3000 MB).

  I hope this helps.

• Error: ' Pictures.library - ms no longer works. " This library can be removed safely from your computer. Records that have been added will not suffer' while accessing the image library.

  Title: Picures library no longer works?

  Whenever I try to open my library of images, I get the error message "Pictures.library - ms no longer works." This library can be removed safely from your computer. Records that have been added will not suffer. "It allows me to take pictures with my webcam or anything like that.

  Hi Love_atomic,

  Thanks for choosing Windows 8.
   
  I understand that you receive error message when trying to access the image library. I'll be happy to help you with this problem.
   
  (1) did you do changes on the computer before this problem?
  (2) is the issue limited only with the specific folder?
   
  I suggest you to follow the steps and check if the problem persists.
  (a) open Windows Explorer .
  (b) with the right button on image library , and select Remove.
  (c) click Yes to confirm.
  (d) then right click on libraries in the navigation pane.
  (e) select restore default libraries.
  
  Note: Deleting of a library does not delete the contents of the included folders. However, you need to add or include your folders manually, if necessary.
   
  I hope it helps. If you have problems in the future, please let us know. We will be happy to help you.

• Blog sidebar does not not once the model module are inserted.

  Hi all

  I don't know it was stupid mistake, but I inherited a BC imported by another developer of Wordpress site.

  I created my blog with a cursor and the sidebar template.

  Put my {tag_pagecontent}.

  Added to my list overall, model custom retail as well as a few .tpl files

  The page looks OK visually but the data in my sidebar is more clickable.

  I guess that's a script error, but can't make heads or tails of it. Anyone would be willing to take a look and help out me?

  http://thefep.BusinessCatalyst.com/free-energy-project

  Inspect your tool article inspect containers using your browser. You will see unless they extend through and above the sidebar.

• My cooling system does not work properly model is Pavilion 5CD2086QMY A7A43UA #ABA g7

  My cooling system does not work properly model is Pavilion 5CD2086QMY A7A43UA #ABA g7

  Use a can of compressed air in the opposite direction of the normal airflow with the machine off.

• Resumption of the Suspended virtual machine does not work, "the specified file is not a virtual disk.

  Resume a Suspended computer virtual fails with the message "the specified file is not a virtual disk. Tried to go back to the last snapshot fails with the same message "error restoring snapshot: the specified file is not a virtual disk '. '"

  The virtual machine has worked without delivers up to 21/12/2015 while she was snecessary. I often suspend > resume this machine virtual, but for some reason, I am now getting this error. Please help!

  The file unfortunately doesn't look very promising. It seems that the contents were crushed,

  Unless you have a backup, you can try to replace this file with a file 'empty' hard (e.g. copy Windows 7 x 64-000002-s100. ) ( vmdk) that contains only metadata (size = 327 680), to see if this allows you to use the virtual machine again. Note that you will lose all the data stored in the (corrupt) original hard file, and that the virtual machine will probably suffer file system errors. So make sure that you run chkdsk for all partitions in the guest OS.

  In any case, before doing so, I strongly recommend that you back up the existing files of the virtual machine! Once done, it could also be a good idea to run chkdsk for physical training.

  BTW. do you need all the snapshots? With all these clichés and the size of the virtual disk of the virtual machine, the virtual disk consists of files hard ~ 400.

  André

• Photoshop CS3 is not enough virtual memory

  My photoshop program won't let me even open a file now without busting a message saying it's not enough virtual memory. I tried to change the amount of RAM, it offers access too, but it does not help. It does not seem to count how many things I opened.

  Try to change or add to the "scratch disks" Photoshop has access too. Its in the preferences under the edit menu, probably in the performance category, although I don't remember CS3 very well these days.

  Terri